From: Stefan Roese Date: Tue, 14 Aug 2007 12:41:55 +0000 (+0200) Subject: POST: Add option for external ethernet loopback test X-Git-Tag: v1.3.0-rc1~19^2~17^2~3^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c5a172a5fd636c12467429e3f7910e53773979c6;p=u-boot POST: Add option for external ethernet loopback test When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST is not done using an internal loopback connection, but by assuming that an external loopback connector is plugged into the board. Signed-off-by: Stefan Roese --- diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index 391c815d7a..ab23ca5a3d 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -68,10 +68,10 @@ static char *rx_buf; static void ether_post_init (int devnum, int hw_addr) { int i; - unsigned mode_reg; #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) + unsigned mode_reg; sys_info_t sysinfo; #endif #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE) @@ -185,10 +185,17 @@ static void ether_post_init (int devnum, int hw_addr) mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum)); /* set internal loopback mode */ +#ifdef CFG_POST_ETHER_EXT_LOOPBACK + out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | 0 | + EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | + EMAC_M1_MF_100MBPS | EMAC_M1_IST | + in32 (EMAC_M1)); +#else out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE | EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | EMAC_M1_MF_100MBPS | EMAC_M1_IST | in32 (EMAC_M1)); +#endif /* set transmit enable & receive enable */ out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);