From: Stefan Bigler <stefan.bigler@keymile.com>
Date: Fri, 8 Apr 2011 14:24:08 +0000 (+0200)
Subject: i2c: add i2c deblock sequence before and after every mux config
X-Git-Tag: v2011.06-rc1~121^2~1
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c649dda537a1a585e51066169e6fdb67e2b8f59e;p=u-boot

i2c: add i2c deblock sequence before and after every mux config

To make sure that the mux can be configured a deblocking sequence
is done before the mux configuration. After the mux switch the new leaf
of, the i2c tree must be again deblocked.

Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
---

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c272b0dd4f..d913e13665 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -132,6 +132,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define DISP_LINE_LEN	16
 
+/* implement possible board specific board init */
+void __def_i2c_init_board(void)
+{
+	return;
+}
+void i2c_init_board(void)
+	__attribute__((weak, alias("__def_i2c_init_board")));
+
 /* TODO: Implement architecture-specific get/set functions */
 unsigned int __def_i2c_get_bus_speed(void)
 {
@@ -1541,6 +1549,8 @@ int i2x_mux_select_mux(int bus)
 
 	mux = dev->mux;
 	while (mux != NULL) {
+		/* do deblocking on each level of mux, before mux config */
+		i2c_init_board();
 		if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) {
 			printf ("Error setting Mux: chip:%x channel: \
 				%x\n", mux->chip, mux->channel);
@@ -1548,6 +1558,8 @@ int i2x_mux_select_mux(int bus)
 		}
 		mux = mux->next;
 	}
+	/* do deblocking on each level of mux and after mux config */
+	i2c_init_board();
 	return 0;
 }
 #endif /* CONFIG_I2C_MUX */
diff --git a/include/i2c.h b/include/i2c.h
index cd23c8ac12..8ceb4c8521 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -108,9 +108,7 @@
  * repeatedly to change the speed and slave addresses.
  */
 void i2c_init(int speed, int slaveaddr);
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
 void i2c_init_board(void);
-#endif
 #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
 void i2c_board_late_init(void);
 #endif