From: Kumar Gala Date: Fri, 21 May 2010 09:14:49 +0000 (-0500) Subject: ppc/85xx: Convert MPC8536DS to using board common ICS307 code X-Git-Tag: v2010.09-rc1~80^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c7e1a43de6818eb0b40d0b8db4f1a2bc54185eeb;p=u-boot ppc/85xx: Convert MPC8536DS to using board common ICS307 code Signed-off-by: Kumar Gala --- diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 14c74081b2..2d48d7ea32 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -42,6 +42,7 @@ COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8555CDS) += cds_pci_ft.o +COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o COBJS-$(CONFIG_P1022DS) += ics307_clk.o COBJS-$(CONFIG_P2020DS) += ics307_clk.o diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 1968106711..50ca3cae9f 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -350,154 +350,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char -ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VSYSCLK0), - in_8(pixis_base + PIXIS_VSYSCLK1), - in_8(pixis_base + PIXIS_VSYSCLK2) - ); -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VDDRCLK0), - in_8(pixis_base + PIXIS_VDDRCLK1), - in_8(pixis_base + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9c46d3e947..a014ad0941 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2009,2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT 1 #endif @@ -70,15 +72,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default.