From: Eric Bollengier Date: Wed, 5 Dec 2012 21:34:40 +0000 (+0100) Subject: Update label for directives to use Component:Resource:Directive format X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c81e42d629898281eb8c9490eb17b658ff79d24c;p=bacula%2Fdocs Update label for directives to use Component:Resource:Directive format --- diff --git a/docs/manuals/en/main/dirdconf.tex b/docs/manuals/en/main/dirdconf.tex index 46281ddd..6fc8727c 100644 --- a/docs/manuals/en/main/dirdconf.tex +++ b/docs/manuals/en/main/dirdconf.tex @@ -100,21 +100,21 @@ index and media database redundancy. Start of the Director resource. One and only one director resource must be supplied. -\label{Director:Name} +\label{Director:Director:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} The director name used by the system administrator. This directive is required. -\label{Director:Description} +\label{Director:Director:Description} \item [Description = \lt{}text\gt{}] \index[dir]{Description} \index[dir]{Directive!Description} The text field contains a description of the Director that will be displayed in the graphical user interface. This directive is optional. -\label{Director:Password} +\label{Director:Director:Password} \item [Password = \lt{}UA-password\gt{}] \index[dir]{Password} \index[dir]{Directive!Password} @@ -132,7 +132,7 @@ in the graphical user interface. This directive is optional. process but as noted above, it is better to use random text for security reasons. - \label{Director:Messages} + \label{Director:Director:Messages} \item [Messages = \lt{}Messages-resource-name\gt{}] \index[dir]{Directive!Messages} The messages resource specifies where to deliver Director messages that are @@ -141,7 +141,7 @@ in the graphical user interface. This directive is optional. there are a few messages that can occur when no job is running. This directive is required. - \label{Director:WorkingDirectory} + \label{Director:Director:WorkingDirectory} \item [Working Directory = \lt{}Directory\gt{}] \index[dir]{Working Directory} \index[dir]{Directive!Working Directory} @@ -163,7 +163,7 @@ in the graphical user interface. This directive is optional. {\bf {-}{-}with-dir-group} the Working Directory owner and group will be set to those values. - \label{Director:PidDirectory} + \label{Director:Director:PidDirectory} \item [Pid Directory = \lt{}Directory\gt{}] \index[dir]{Pid Directory} \index[dir]{Directive!Pid Directory} @@ -181,7 +181,7 @@ in the graphical user interface. This directive is optional. not installing Bacula in the system directories, you can use the {\bf Working Directory} as defined above. This directive is required. - \label{Director:ScriptsDirectory} + \label{Director:Director:ScriptsDirectory} \item [Scripts Directory = \lt{}Directory\gt{}] \index[dir]{Scripts Directory} \index[dir]{Directive!Scripts Directory} @@ -192,7 +192,7 @@ in the graphical user interface. This directive is optional. file is read so that values such as {\bf \$HOME} will be properly expanded. - \label{Director:QueryFile} + \label{Director:Director:QueryFile} \item [QueryFile = \lt{}Path\gt{}] \index[dir]{QueryFile} \index[dir]{Directive!QueryFile} @@ -202,7 +202,7 @@ in the graphical user interface. This directive is optional. done when the configuration file is read so that values such as {\bf \$HOME} will be properly expanded. This directive is required. - \label{Director:HeartbeatInterval} + \label{Director:Director:HeartbeatInterval} \item [Heartbeat Interval = \lt{}time-interval\gt{}] \index[dir]{Heartbeat Interval} \index[dir]{Directive!Heartbeat} @@ -215,7 +215,7 @@ in the graphical user interface. This directive is optional. \label{DirMaxConJobs} - \label{Director:MaximumConcurrentJobs} + \label{Director:Director:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[dir]{Maximum Concurrent Jobs} \index[dir]{Directive!Maximum Concurrent Jobs} @@ -233,7 +233,7 @@ in the graphical user interface. This directive is optional. to disk simultaneously, then write one spool file at a time to the volume thus avoiding excessive interleaving of the different job blocks. - \label{Director:FdConnectTimeout} + \label{Director:Director:FdConnectTimeout} \item [FD Connect Timeout = \lt{}time\gt{}] \index[dir]{FD Connect Timeout} \index[dir]{Directive!FD Connect Timeout} @@ -241,7 +241,7 @@ in the graphical user interface. This directive is optional. attempting to contact the File daemon to start a job, and after which the Director will cancel the job. The default is 30 minutes. - \label{Director:SdConnectTimeout} + \label{Director:Director:SdConnectTimeout} \item [SD Connect Timeout = \lt{}time\gt{}] \index[dir]{SD Connect Timeout} \index[dir]{Directive!SD Connect Timeout} @@ -249,7 +249,7 @@ in the graphical user interface. This directive is optional. attempting to contact the Storage daemon to start a job, and after which the Director will cancel the job. The default is 30 minutes. - \label{Director:DirAddresses} + \label{Director:Director:DirAddresses} \item [DirAddresses = \lt{}IP-address-specification\gt{}] \index[dir]{DirAddresses} \index[dir]{Address} @@ -294,7 +294,7 @@ Please note that if you use the DirAddresses directive, you must not use either a DirPort or a DirAddress directive in the same resource. - \label{Director:DirPort} + \label{Director:Director:DirPort} \item [DirPort = \lt{}port-number\gt{}] \index[dir]{DirPort} \index[dir]{Directive!DirPort} @@ -305,7 +305,7 @@ resource. directive should not be used if you specify DirAddresses (N.B plural) directive. - \label{Director:DirAddress} + \label{Director:Director:DirAddress} \item [DirAddress = \lt{}IP-Address\gt{}] \index[dir]{DirAddress} \index[dir]{Directive!DirAddress} @@ -318,7 +318,7 @@ resource. directive only permits a single address to be specified. This directive should not be used if you specify a DirAddresses (N.B. plural) directive. - \label{Director:DirSourceAddress} + \label{Director:Director:DirSourceAddress} \item [DirSourceAddress = \lt{}IP-Address\gt{}] \index[fd]{DirSourceAddress} \index[fd]{Directive!DirSourceAddress} @@ -329,7 +329,7 @@ resource. its outgoing connections according to the system routing table (the default). \phantomsection -\label{Director:StatisticsRetention} +\label{Director:Director:StatisticsRetention} \item[Statistics Retention = \lt{}time\gt{}] \index[dir]{StatisticsRetention} \label{PruneStatistics} @@ -350,13 +350,13 @@ resource. The default is 5 years. - \label{Director:VerId} + \label{Director:Director:VerId} \item[VerId = \lt{}string\gt{}] \index[dir]{Directive!VerId} where \lt{}string\gt{} is an identifier which can be used for support purpose. This string is displayed using the \texttt{version} command. - \label{Director:MaximumConsoleConnections} + \label{Director:Director:MaximumConsoleConnections} \item[MaximumConsoleConnections = \lt{}number\gt{}] \index[dir]{MaximumConsoleConnections} \index[dir]{Directive!MaximumConsoleConnections} @@ -365,7 +365,7 @@ resource. could run concurrently. The default is set to 20, but you may set it to a larger number. -\label{Director:MaximumReloadRequests} +\label{Director:Director:MaximumReloadRequests} \item[MaximumReloadRequests = \lt{}number\gt{}] \index[dir]{MaximumReloadRequests} \index[dir]{Directive!MaximumReloadRequests} @@ -462,7 +462,7 @@ the FileSets may be the same). \index[dir]{Directive!Job} Start of the Job resource. At least one Job resource is required. - \label{Job:Name} + \label{Director:Job:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} @@ -476,14 +476,14 @@ the FileSets may be the same). specify here followed by the date and time the job was scheduled for execution. This directive is required. - \label{Job:Enable} + \label{Director:Job:Enable} \item [Enabled = \lt{}yes\vb{}no\gt{}] \index[dir]{Enable} \index[dir]{Directive!Enable} This directive allows you to enable or disable automatic execution via the scheduler of a Job. - \label{Job:Type} + \label{Director:Job:Type} \item [Type = \lt{}job-type\gt{}] \index[dir]{Type} \index[dir]{Directive!Type} @@ -533,7 +533,7 @@ the FileSets may be the same). \label{Level} -\label{Job:Level} +\label{Director:Job:Level} \item [Level = \lt{}job-level\gt{}] \index[dir]{Level} \index[dir]{Directive!Level} @@ -773,7 +773,7 @@ For a {\bf Verify} Job, the Level may be one of the following: have been deleted. \end{description} -\label{Job:Accurate} +\label{Director:Job:Accurate} \item [Accurate = \lt{}yes\vb{}no\gt{}] \index[dir]{Accurate} In accurate mode, the File daemon knowns exactly which files were present @@ -795,7 +795,7 @@ For a {\bf Verify} Job, the Level may be one of the following: approximately 64 Megabytes of RAM on your File daemon to hold the required information. - \label{Job:VerifyJob} + \label{Director:Job:VerifyJob} \item [Verify Job = \lt{}Job-Resource-Name\gt{}] \index[dir]{Verify Job} \index[dir]{Directive!Verify Job} @@ -807,7 +807,7 @@ For a {\bf Verify} Job, the Level may be one of the following: verified (most often a {\bf VolumeToCatalog}) so that the tape just written is re-read. -\label{Job:JobDefs} +\label{Director:Job:JobDefs} \item [JobDefs = \lt{}JobDefs-Resource-Name\gt{}] \index[dir]{JobDefs} \index[dir]{Directive!JobDefs} @@ -821,7 +821,7 @@ For a {\bf Verify} Job, the Level may be one of the following: variations such as different Clients. A simple example of the use of JobDefs is provided in the default bacula-dir.conf file. -\label{Job:Bootstrap} +\label{Director:Job:Bootstrap} \item [Bootstrap = \lt{}bootstrap-file\gt{}] \index[dir]{Bootstrap} \index[dir]{Directive!Bootstrap} @@ -842,7 +842,7 @@ For a {\bf Verify} Job, the Level may be one of the following: of this manual. \label{writebootstrap} -\label{Job:WriteBootstrap} +\label{Director:Job:WriteBootstrap} \item [Write Bootstrap = \lt{}bootstrap-file-specification\gt{}] \index[dir]{Write Bootstrap} \index[dir]{Directive!Write Bootstrap} @@ -884,7 +884,7 @@ JobDefs { For more details on using this file, please see the chapter entitled \ilink{The Bootstrap File}{BootstrapChapter} of this manual. -\label{Job:Client} +\label{Director:Job:Client} \item [Client = \lt{}client-resource-name\gt{}] \index[dir]{Client} \index[dir]{Directive!Client} @@ -896,7 +896,7 @@ JobDefs { \ilink{Client Resource section}{ClientResource} of this chapter. This directive is required. -\label{Job:FileSet} +\label{Director:Job:FileSet} \item [FileSet = \lt{}FileSet-resource-name\gt{}] \index[dir]{FileSet} \index[dir]{Directive!FileSet} @@ -907,7 +907,7 @@ JobDefs { details, see the \ilink{FileSet Resource section}{FileSetResource} of this chapter. This directive is required. -\label{Job:Base} +\label{Director:Job:Base} \item [Base = \lt{}job-resource-name, \ldots{}\gt{}] \index[dir]{Base} \index[dir]{Directive!Base} @@ -915,7 +915,7 @@ The Base directive permits to specify the list of jobs that will be used during Full backup as base. This directive is optional. See the \ilink{Base Job chapter}{basejobs} for more information. -\label{Job:Messages} +\label{Director:Job:Messages} \item [Messages = \lt{}messages-resource-name\gt{}] \index[dir]{Messages} \index[dir]{Directive!Messages} @@ -926,7 +926,7 @@ chapter}{basejobs} for more information. \ilink{Messages Resource}{MessagesChapter} Chapter of this manual. This directive is required. -\label{Job:Pool} +\label{Director:Job:Pool} \item [Pool = \lt{}pool-resource-name\gt{}] \index[dir]{Pool} \index[dir]{Directive!Pool} @@ -937,7 +937,7 @@ chapter}{basejobs} for more information. Pools. For additional details, see the \ilink{Pool Resource section}{PoolResource} of this chapter. This directive is required. -\label{Job:FullBackupPool} +\label{Director:Job:FullBackupPool} \item [Full Backup Pool = \lt{}pool-resource-name\gt{}] \index[dir]{Full Backup Pool} \index[dir]{Directive!Full Backup Pool} @@ -945,7 +945,7 @@ chapter}{basejobs} for more information. It will override any Pool specification during a Full backup. This directive is optional. -\label{Job:DifferentialBackupPool} +\label{Director:Job:DifferentialBackupPool} \item [Differential Backup Pool = \lt{}pool-resource-name\gt{}] \index[dir]{Differential Backup Pool} \index[dir]{Directive!Differential Backup Pool} @@ -953,7 +953,7 @@ chapter}{basejobs} for more information. Differential backups. It will override any Pool specification during a Differential backup. This directive is optional. -\label{Job:IncrementalBackupPool} +\label{Director:Job:IncrementalBackupPool} \item [Incremental Backup Pool = \lt{}pool-resource-name\gt{}] \index[dir]{Incremental Backup Pool} \index[dir]{Directive!Incremental Backup Pool} @@ -961,7 +961,7 @@ chapter}{basejobs} for more information. Incremental backups. It will override any Pool specification during an Incremental backup. This directive is optional. -\label{Job:Schedule} +\label{Director:Job:Schedule} \item [Schedule = \lt{}schedule-name\gt{}] \index[dir]{Schedule} \index[dir]{Directive!Schedule} @@ -979,7 +979,7 @@ chapter}{basejobs} for more information. Chapter}{ScheduleResource} of this manual. -\label{Job:Storage} +\label{Director:Job:Storage} \item [Storage = \lt{}storage-resource-name\gt{}] \index[dir]{Storage} \index[dir]{Directive!Storage} @@ -992,7 +992,7 @@ chapter}{basejobs} for more information. the Job resource or in the Pool, but it must be specified in one or the other, if not an error will result. -\label{Job:MaxStartDelay} +\label{Director:Job:MaxStartDelay} \item [Max Start Delay = \lt{}time\gt{}] \index[dir]{Max Start Delay} \index[dir]{Directive!Max Start Delay} @@ -1004,7 +1004,7 @@ chapter}{basejobs} for more information. to prevent jobs from running during day time hours. The default is 0 which indicates no limit. -\label{Job:MaxRunTime} +\label{Director:Job:MaxRunTime} \item [Max Run Time = \lt{}time\gt{}] \index[dir]{Max Run Time} \index[dir]{Directive!Max Run Time} @@ -1017,7 +1017,7 @@ chapter}{basejobs} for more information. and cannot be changed. -\label{Job:IncrementalWaitRunTime} +\label{Director:Job:IncrementalWaitRunTime} \item [Incremental|Differential Max Wait Time = \lt{}time\gt{}] \index[dir]{Incremental Wait Run Time} \index[dir]{Differential Wait Run Time} @@ -1025,7 +1025,7 @@ chapter}{basejobs} for more information. Theses directives have been deprecated in favor of \texttt{Incremental|Differential Max Run Time} since bacula 2.3.18. -\label{Job:IncrementalMaxRunTime} +\label{Director:Job:IncrementalMaxRunTime} \item [Incremental Max Run Time = \lt{}time\gt{}] \index[dir]{Incremental Max Run Time} \index[dir]{Directive!Incremental Max Run Time} @@ -1033,7 +1033,7 @@ The time specifies the maximum allowed time that an Incremental backup job may run, counted from when the job starts, ({\bf not} necessarily the same as when the job was scheduled). -\label{Job:DifferentialMaxRunTime} +\label{Director:Job:DifferentialMaxRunTime} \item [Differential Max Wait Time = \lt{}time\gt{}] \index[dir]{Differential Max Run Time} \index[dir]{Directive!Differential Max Run Time} @@ -1041,7 +1041,7 @@ The time specifies the maximum allowed time that a Differential backup job may run, counted from when the job starts, ({\bf not} necessarily the same as when the job was scheduled). -\label{Job:MaxRunSchedTime} +\label{Director:Job:MaxRunSchedTime} \item [Max Run Sched Time = \lt{}time\gt{}] \index[dir]{Max Run Sched Time} \index[dir]{Directive!Max Run Sched Time} @@ -1051,7 +1051,7 @@ when the job was scheduled. This can be useful to prevent jobs from running during working hours. We can see it like \texttt{Max Start Delay + Max Run Time}. -\label{Job:MaxWaitTime} +\label{Director:Job:MaxWaitTime} \item [Max Wait Time = \lt{}time\gt{}] \index[dir]{Max Wait Time} \index[dir]{Directive!Max Wait Time} @@ -1069,7 +1069,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run %% \caption{Job time control directives} %% \end{figure} -\label{Job:MaximumBandwidth} +\label{Director:Job:MaximumBandwidth} \item [Maximum Bandwidth = \lt{}speed\gt{}] \index[dir]{Maximum Bandwidth} \index[dir]{Directive!Maximum Bandwidth} @@ -1077,7 +1077,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run The speed parameter specifies the maximum allowed bandwidth that a job may use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. -\label{Job:MaxFullInterval} +\label{Director:Job:MaxFullInterval} \item [Max Full Interval = \lt{}time\gt{}] \index[dir]{Max Full Interval} \index[dir]{Directive!Max Full Interval} @@ -1090,7 +1090,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. considered. \label{PreferMountedVolumes} -\label{Job:PreferMountedVolumes} +\label{Director:Job:PreferMountedVolumes} \item [Prefer Mounted Volumes = \lt{}yes\vb{}no\gt{}] \index[dir]{Prefer Mounted Volumes} \index[dir]{Directive!Prefer Mounted Volumes} @@ -1127,7 +1127,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. pools so that Bacula will be forced to mount Volumes from those Pools on different drives. -\label{Job:PruneJobs} +\label{Director:Job:PruneJobs} \item [Prune Jobs = \lt{}yes\vb{}no\gt{}] \index[dir]{Prune Jobs} \index[dir]{Directive!Prune Jobs} @@ -1138,7 +1138,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. default is {\bf no}. -\label{Job:PruneFiles} +\label{Director:Job:PruneFiles} \item [Prune Files = \lt{}yes\vb{}no\gt{}] \index[dir]{Prune Files} \index[dir]{Directive!Prune Files} @@ -1148,7 +1148,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. yes}, it will override the value specified in the Client resource. The default is {\bf no}. -\label{Job:PruneVolumes} +\label{Director:Job:PruneVolumes} \item [Prune Volumes = \lt{}yes\vb{}no\gt{}] \index[dir]{Prune Volumes} \index[dir]{Directive!Prune Volumes} @@ -1159,7 +1159,7 @@ use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. and the value is {\bf yes}, it will override the value specified in the Pool resource. The default is {\bf no}. - \label{Job:RunScript} + \label{Director:Job:RunScript} \item [RunScript \{\lt{}body-of-runscript\gt{}\}] \index[dir]{RunScript} \index[dir]{Directive!Run Script} @@ -1459,7 +1459,7 @@ the following: It is important to redirect the input and outputs of a backgrounded command to /dev/null to prevent the script from blocking. -\label{Job:RunBeforeJob} +\label{Director:Job:RunBeforeJob} \item [Run Before Job = \lt{}command\gt{}] \index[dir]{Run Before Job} \index[dir]{Directive!Run Before Job} @@ -1490,7 +1490,7 @@ RunScript { Thursday job will not run, and on Friday the tape you inserted on Wednesday before leaving will be used. -\label{Job:RunAfterJob} +\label{Director:Job:RunAfterJob} \item [Run After Job = \lt{}command\gt{}] \index[dir]{Run After Job} \index[dir]{Directive!Run After Job} @@ -1508,7 +1508,7 @@ RunScript { want to run a script after the job has terminated with any non-normal status. -\label{Job:RunAfterJob} +\label{Director:Job:RunAfterJob} \item [Run After Failed Job = \lt{}command\gt{}] \index[dir]{Run After Job} \index[dir]{Directive!Run After Job} @@ -1534,7 +1534,7 @@ RunScript { \bsysxrlink{Tips}{JobNotification}{problems}{chapter} of the \problemsman{}. -\label{Job:ClientRunBeforeJob} +\label{Director:Job:ClientRunBeforeJob} \item [Client Run Before Job = \lt{}command\gt{}] \index[dir]{Client Run Before Job} \index[dir]{Directive!Client Run Before Job} @@ -1542,7 +1542,7 @@ RunScript { program is run on the client machine. The same restrictions apply to Unix systems as noted above for the {\bf RunScript}. - \label{Job:ClientRunAfterJob} + \label{Director:Job:ClientRunAfterJob} \item [Client Run After Job = \lt{}command\gt{}] \index[dir]{Client Run After Job} \index[dir]{Directive!Client Run After Job} @@ -1553,7 +1553,7 @@ RunScript { Note, please see the notes above in {\bf RunScript} concerning Windows clients. - \label{Job:RerunFailedLevels} + \label{Director:Job:RerunFailedLevels} \item [Rerun Failed Levels = \lt{}yes\vb{}no\gt{}] \index[dir]{Rerun Failed Levels} \index[dir]{Directive!Rerun Failed Levels} @@ -1572,7 +1572,7 @@ RunScript { when checking for failed levels, which means that any FileSet change will trigger a rerun. - \label{Job:SpoolData} + \label{Director:Job:SpoolData} \item [Spool Data = \lt{}yes\vb{}no\gt{}] \index[dir]{Spool Data} \index[dir]{Directive!Spool Data} @@ -1596,14 +1596,14 @@ RunScript { NOTE: When this directive is set to yes, Spool Attributes is also automatically set to yes. - \label{Job:SpoolData} + \label{Director:Job:SpoolData} \item [SpoolData=yes\vb{}no] \index[dir]{SpoolData} \index[dir]{Directive!SpoolData} tells Bacula to request the Storage daemon to spool data to a disk file before writing it to the Volume (normally a tape). - \label{Job:SpoolAttributes} + \label{Director:Job:SpoolAttributes} \item [Spool Attributes = \lt{}yes\vb{}no\gt{}] \index[dir]{Spool Attributes} \index[dir]{Directive!Spool Attributes} @@ -1623,7 +1623,7 @@ RunScript { NOTE: When Spool Data is set to yes, Spool Attributes is also automatically set to yes. - \label{Job:SpoolSize} + \label{Director:Job:SpoolSize} \item [SpoolSize={\it bytes}] \index[dir]{SpoolSize} \index[dir]{Directive!SpoolSize} @@ -1633,7 +1633,7 @@ RunScript { later. - \label{Job:Where} + \label{Director:Job:Where} \item [Where = \lt{}directory\gt{}] \index[dir]{Where} \index[dir]{Directive!Where} @@ -1647,7 +1647,7 @@ RunScript { your files. \label{confaddprefix} - \label{Job:AddPrefix} + \label{Director:Job:AddPrefix} \item [Add Prefix = \lt{}directory\gt{}] \index[dir]{AddPrefix} \index[dir]{Directive!AddPrefix} @@ -1655,7 +1655,7 @@ RunScript { directory name of all files being restored. This will use \ilink{File Relocation}{filerelocation} feature implemented in Bacula 2.1.8 or later. - \label{Job:AddSuffix} + \label{Director:Job:AddSuffix} \item [Add Suffix = \lt{}extention\gt{}] \index[dir]{AddSuffix} \index[dir]{Directive!AddSuffix} @@ -1666,7 +1666,7 @@ RunScript { Using \texttt{Add Suffix=.old}, \texttt{/etc/passwd} will be restored to \texttt{/etc/passwsd.old} - \label{Job:StripPrefix} + \label{Director:Job:StripPrefix} \item [Strip Prefix = \lt{}directory\gt{}] \index[dir]{StripPrefix} \index[dir]{Directive!StripPrefix} @@ -1686,7 +1686,7 @@ RunScript { Add Prefix = d: \end{lstlisting} - \label{Job:RegexWhere} + \label{Director:Job:RegexWhere} \item [RegexWhere = \lt{}expressions\gt{}] \index[dir]{RegexWhere} \index[dir]{Directive!RegexWhere} @@ -1697,7 +1697,7 @@ RunScript { For more informations about how use this option, see \ilink{this}{useregexwhere}. - \label{Job:Replace} + \label{Director:Job:Replace} \item [Replace = \lt{}replace-option\gt{}] \index[dir]{Replace} \index[dir]{Directive!Replace} @@ -1727,7 +1727,7 @@ RunScript { if the backed up file already exists, Bacula skips restoring this file. \end{description} - \label{Job:PrefixLinks} + \label{Director:Job:PrefixLinks} \item [Prefix Links=\lt{}yes\vb{}no\gt{}] \index[dir]{Prefix Links} \index[dir]{Directive!Prefix Links} @@ -1739,7 +1739,7 @@ RunScript { consistent. However, if you wish to later move the files to their original locations, all files linked with absolute names will be broken. - \label{Job:MaximumConcurrentJobs} + \label{Director:Job:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[dir]{Maximum Concurrent Jobs} \index[dir]{Directive!Maximum Concurrent Jobs} @@ -1753,7 +1753,7 @@ RunScript { documented under \ilink{ Maximum Concurrent Jobs}{DirMaxConJobs} in the Director's resource. - \label{Job:RescheduleOnError} + \label{Director:Job:RescheduleOnError} \item [Reschedule On Error = \lt{}yes\vb{}no\gt{}] \index[dir]{Reschedule On Error} \index[dir]{Directive!Reschedule On Error} @@ -1766,7 +1766,7 @@ RunScript { This specification can be useful for portables, laptops, or other machines that are not always connected to the network or switched on. - \label{Job:RescheduleInterval} + \label{Director:Job:RescheduleInterval} \item [Reschedule Interval = \lt{}time-specification\gt{}] \index[dir]{Reschedule Interval} \index[dir]{Directive!Reschedule Interval} @@ -1777,7 +1777,7 @@ RunScript { time specifications. If no interval is specified, the job will not be rescheduled on error. - \label{Job:RescheduleTimes} + \label{Director:Job:RescheduleTimes} \item [Reschedule Times = \lt{}count\gt{}] \index[dir]{Reschedule Times} \index[dir]{Directive!Reschedule Times} @@ -1785,7 +1785,7 @@ RunScript { job. If it is set to zero (the default) the job will be rescheduled an indefinite number of times. -\label{Job:AllowDuplicateJobs} +\label{Director:Job:AllowDuplicateJobs} \item [Allow Duplicate Jobs = \lt{}yes\vb{}no\gt{}] \index[general]{Allow Duplicate Jobs} @@ -1819,7 +1819,7 @@ runs longer than expected because no tapes are available. of Bacula the directive is disabled (disregarded). -\label{Job:CancelLowerLevelDuplicates} +\label{Director:Job:CancelLowerLevelDuplicates} \item [Cancel Lower Level Duplicates = \lt{}yes\vb{}no\gt{}] \index[general]{Cancel Lower Level Duplicates} If \textbf{Allow Duplicates Jobs} is set to \textbf{no} and this @@ -1830,7 +1830,7 @@ runs longer than expected because no tapes are available. jobs are the same, nothing is done and the other Cancel XXX Duplicate directives will be examined. -\label{Job:CancelQueuedDuplicates} +\label{Director:Job:CancelQueuedDuplicates} \item [Cancel Queued Duplicates = \lt{}yes\vb{}no\gt{}] \index[general]{Cancel Queued Duplicates} If {\bf Allow Duplicate Jobs} is set to {\bf no} and @@ -1838,7 +1838,7 @@ runs longer than expected because no tapes are available. already queued to run but not yet running will be canceled. The default is {\bf no}. -\label{Job:CancelRunningDuplicates} +\label{Director:Job:CancelRunningDuplicates} \item[Cancel Running Duplicates = \lt{}yes\vb{}no\gt{}] \index[general]{Cancel Running Duplicates} If {\bf Allow Duplicate Jobs} is set to {\bf no} and @@ -1852,7 +1852,7 @@ runs longer than expected because no tapes are available. %% If the first one is running for long time, this is probably not a good %% idea to cancel it. - \label{Job:Run} + \label{Director:Job:Run} \item [Run = \lt{}job-name\gt{}] \index[dir]{Run} \index[dir]{Directive!Run} @@ -1897,7 +1897,7 @@ runs longer than expected because no tapes are available. resource, or a RunBeforeJob directive. \label{Priority} - \label{Job:Priority} + \label{Director:Job:Priority} \item [Priority = \lt{}number\gt{}] \index[dir]{Priority} \index[dir]{Directive!Priority} @@ -1950,7 +1950,7 @@ priority ones. This insures that Bacula will examine the jobs in the correct order, and that your priority scheme will be respected. \label{AllowMixedPriority} -\label{Job:AllowMixedPriority} +\label{Director:Job:AllowMixedPriority} \item [Allow Mixed Priority = \lt{}yes\vb{}no\gt{}] \index[dir]{Allow Mixed Priority} This directive is only implemented in version 2.5 and later. When @@ -1968,7 +1968,7 @@ correct order, and that your priority scheme will be respected. be run until the priority 5 job has finished. \label{WritePartAfterJob} -\label{Job:WritePartAfterJob} +\label{Director:Job:WritePartAfterJob} \item [Write Part After Job = \lt{}yes\vb{}no\gt{}] \index[dir]{Write Part After Job} \index[dir]{Directive!Write Part After Job} @@ -2039,13 +2039,13 @@ be run manually. In general, you specify an action to be taken and when. required, but you will need at least one if you want Jobs to be automatically started. - \label{Schdedule:Name} + \label{Director:Schedule:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} The name of the schedule being defined. The Name directive is required. - \label{Schdedule:Run} + \label{Director:Schedule:Run} \item [Run = \lt{}Job-overrides\gt{} \lt{}Date-time-specification\gt{}] \index[dir]{Run} \index[dir]{Directive!Run} @@ -2326,14 +2326,14 @@ one Client resource definition for each machine to be backed up. \index[dir]{Directive!Client (or FileDaemon)} Start of the Client directives. - \label{Client:Name} + \label{Director:Client:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} The client name which will be used in the Job resource directive or in the console run command. This directive is required. - \label{Client:Address} + \label{Director:Client:Address} \item [Address = \lt{}address\gt{}] \index[dir]{Address} \index[dir]{Directive!FD Address} @@ -2343,21 +2343,21 @@ console run command. This directive is required. network address in dotted quad notation for a Bacula File server daemon. This directive is required. - \label{Client:FdPort} + \label{Director:Client:FdPort} \item [FD Port = \lt{}port-number\gt{}] \index[dir]{FD Port} \index[dir]{Directive!FD Port} Where the port is a port number at which the Bacula File server daemon can be contacted. The default is 9102. - \label{Client:Catalog} + \label{Director:Client:Catalog} \item [Catalog = \lt{}Catalog-resource-name\gt{}] \index[dir]{Catalog} \index[dir]{Directive!Catalog} This specifies the name of the catalog resource to be used for this Client. This directive is required. - \label{Client:Password} + \label{Director:Client:Password} \item [Password = \lt{}password\gt{}] \index[dir]{Password} \index[dir]{Directive!Password} @@ -2374,7 +2374,7 @@ console run command. This directive is required. \label{FileRetention} \label{FileRetention} - \label{Client:FileRetention} + \label{Director:Client:FileRetention} \item [File Retention = \lt{}time-period-specification\gt{}] \index[dir]{File Retention} \index[dir]{Directive!File Retention} @@ -2398,7 +2398,7 @@ console run command. This directive is required. The default is 60 days. \label{JobRetention} - \label{Client:JobRetention} + \label{Director:Client:JobRetention} \item [Job Retention = \lt{}time-period-specification\gt{}] \index[dir]{Job Retention} \index[dir]{Directive!Job Retention} @@ -2426,7 +2426,7 @@ console run command. This directive is required. The default is 180 days. \label{AutoPrune} - \label{Client:AutoPrune} + \label{Director:Client:AutoPrune} \item [AutoPrune = \lt{}yes\vb{}no\gt{}] \index[dir]{AutoPrune} \index[dir]{Directive!AutoPrune} @@ -2437,7 +2437,7 @@ console run command. This directive is required. run a Job. Pruning affects only information in the catalog and not data stored in the backup archives (on Volumes). - \label{Client:MaximumConcurrentJobs} + \label{Director:Client:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[dir]{Maximum Concurrent Jobs} \index[dir]{Directive!Maximum Concurrent Jobs} @@ -2448,7 +2448,7 @@ console run command. This directive is required. Storage resources will also apply in addition to any limit specified here. The default is set to 1, but you may set it to a larger number. -\label{Client:MaximumBandwidthPerJob} +\label{Director:Client:MaximumBandwidthPerJob} \item [Maximum Bandwidth Per Job = \lt{}speed\gt{}] \index[dir]{Maximum Bandwidth Per Job} \index[dir]{Directive!Maximum Bandwidth Per Job} @@ -2476,7 +2476,7 @@ k/s, Kb/s, m/s or Mb/s. % \caption{Backup over WAN using FD Storage Address} % \end{figure} - \label{Client:Priority} + \label{Director:Client:Priority} \item [Priority = \lt{}number\gt{}] \index[dir]{Priority} \index[dir]{Directive!Priority} @@ -2515,14 +2515,14 @@ the Director. Start of the Storage resources. At least one storage resource must be specified. - \label{Storage:Name} + \label{Director:Storage:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} The name of the storage resource. This name appears on the Storage directive specified in the Job resource and is required. - \label{Storage:Address} + \label{Director:Storage:Address} \item [Address = \lt{}address\gt{}] \index[dir]{Address} \index[dir]{Directive!SD Address} @@ -2534,7 +2534,7 @@ the Director. the name but rather a fully qualified machine name or an IP address. This directive is required. - \label{Storage:FDStorageAddress} + \label{Director:Storage:FdStorageAddress} \item [FD Storage Address = \lt{}address\gt{}] \index[dir]{FDStorageAddress} \index[dir]{Directive!FD Storage Address} \index[dir]{Storage daemon @@ -2552,7 +2552,7 @@ the Director. %% \caption{Backup over WAN using FD Storage Address} %% \end{figure} - \label{Storage:SdPort} + \label{Director:Storage:SdPort} \item [SD Port = \lt{}port\gt{}] \index[dir]{SD Port} \index[dir]{Directive!SD Port} @@ -2560,7 +2560,7 @@ the Director. and to start jobs. This same port number must appear in the Storage resource of the Storage daemon's configuration file. The default is 9103. - \label{Storage:Password} + \label{Director:Storage:Password} \item [Password = \lt{}password\gt{}] \index[dir]{Password} \index[dir]{Directive!Password} @@ -2574,7 +2574,7 @@ the Director. The password is plain text. It is not generated through any special process, but it is preferable for security reasons to use random text. - \label{Storage:Device} + \label{Director:Storage:Device} \item [Device = \lt{}device-name\gt{}] \index[dir]{Device} \index[dir]{Directive!Device} @@ -2595,7 +2595,7 @@ the Director. open the same device that is already open. This directive is required. \label{MediaType} - \label{Storage:MediaType} + \label{Director:Storage:MediaType} \item [Media Type = \lt{}MediaType\gt{}] \index[dir]{Media Type} \index[dir]{Directive!Media Type} @@ -2656,7 +2656,7 @@ the Director. check so that you don't try to write data for a DLT onto an 8mm device. \label{Autochanger1} - \label{Storage:Autochanger} + \label{Director:Storage:Autochanger} \item [Autochanger = \lt{}yes\vb{}no\gt{}] \index[dir]{Autochanger} \index[dir]{Directive!Autochanger} @@ -2683,7 +2683,7 @@ the Director. Autochangers}{AutochangersChapter} manual of this chapter for the details of using autochangers. - \label{Storage:MaximumConcurrentJobs} + \label{Director:Storage:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[dir]{Maximum Concurrent Jobs} \index[dir]{Directive!Maximum Concurrent Jobs} @@ -2700,7 +2700,7 @@ the Director. Spooling}{SpoolingChapter} chapter of this manual. \label{AllowCompression} - \label{Storage:AllowCompression} + \label{Director:Storage:AllowCompression} \item [AllowCompression = \lt{}yes\vb{}no\gt{}] \index[dir]{AllowCompression} \index[dir]{Directive!AllowCompression} @@ -2711,7 +2711,7 @@ the Director. compression options in FileSets used by jobs which use this storage resource. - \label{Storage:Heartbeat Interval} + \label{Director:Storage:HeartbeatInterval} \item [Heartbeat Interval = \lt{}time-interval\gt{}] \index[dir]{Heartbeat Interval} \index[dir]{Directive!Heartbeat} @@ -2824,7 +2824,7 @@ The Pool Resource defined in the Director's configuration file defined. - \label{Pool:Name} + \label{Director:Pool:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} @@ -2832,7 +2832,7 @@ The Pool Resource defined in the Director's configuration file pool name {\bf Default}. This directive is required. \label{MaxVolumes} - \label{Pool:MaximumVolumes} + \label{Director:Pool:MaximumVolumes} \item [Maximum Volumes = \lt{}number\gt{}] \index[dir]{Maximum Volumes} \index[dir]{Directive!Maximum Volumes} @@ -2843,7 +2843,7 @@ The Pool Resource defined in the Director's configuration file Volumes, or for File storage where you wish to ensure that the backups made to disk files do not become too numerous or consume too much space. - \label{Pool:PoolType} + \label{Director:Pool:PoolType} \item [Pool Type = \lt{}type\gt{}] \index[dir]{Pool Type} \index[dir]{Directive!Pool Type} @@ -2860,7 +2860,7 @@ The Pool Resource defined in the Director's configuration file \end{bsysitemize} Note, only Backup is current implemented. -\label{Pool:Storage} +\label{Director:Pool:Storage} \item [Storage = \lt{}storage-resource-name\gt{}] \index[dir]{Storage} \index[dir]{Directive!Storage} @@ -2873,7 +2873,7 @@ The Pool Resource defined in the Director's configuration file the Job resource or in the Pool, but it must be specified in one or the other. If not configuration error will result. - \label{Pool:UseVolumeOnce} + \label{Director:Director:Pool:UseVolumeOnce} \item [Use Volume Once = \lt{}yes\vb{}no\gt{}] \index[dir]{Use Volume Once} \index[dir]{Directive!Use Volume Once} @@ -2893,7 +2893,7 @@ The Pool Resource defined in the Director's configuration file Please see the notes below under {\bf Maximum Volume Jobs} concerning using this directive with multiple simultaneous jobs. - \label{Pool:MaximumVolumeJobs} + \label{Director:Pool:MaximumVolumeJobs} \item [Maximum Volume Jobs = \lt{}positive-integer\gt{}] \index[dir]{Maximum Volume Jobs} \index[dir]{Directive!Maximum Volume Jobs} @@ -2919,7 +2919,7 @@ The Pool Resource defined in the Director's configuration file updated, multiple simultaneous jobs may fail since the Volume can no longer be written. - \label{Pool:MaximumVolumeFiles} + \label{Director:Pool:MaximumVolumeFiles} \item [Maximum Volume Files = \lt{}positive-integer\gt{}] \index[dir]{Maximum Volume Files} \index[dir]{Directive!Maximum Volume Files} @@ -2939,7 +2939,7 @@ The Pool Resource defined in the Director's configuration file what is stored for the Volume. To change the value for an existing Volume you must use the {\bf update} command in the Console. - \label{Pool:MaximumVolumeBytes} + \label{Director:Pool:MaximumVolumeBytes} \item [Maximum Volume Bytes = \lt{}size\gt{}] \index[dir]{Maximum Volume Bytes} \index[dir]{Directive!Maximum Volume Bytes} @@ -2963,7 +2963,7 @@ The Pool Resource defined in the Director's configuration file what is stored for the Volume. To change the value for an existing Volume you must use the {\bf update} command in the Console. - \label{Pool:VolumeUseDuration} + \label{Director:Pool:VolumeUseDuration} \item [Volume Use Duration = \lt{}time-period-specification\gt{}] \index[dir]{Volume Use Duration} \index[dir]{Directive!Volume Use Duration} @@ -3008,7 +3008,7 @@ The Pool Resource defined in the Director's configuration file must use the \bsysxrlink{update volume}{UpdateCommand}{console}{command} in the \consoleman{}. - \label{Pool:CatalogFiles} + \label{Director:Pool:CatalogFiles} \item [Catalog Files = \lt{}yes\vb{}no\gt{}] \index[dir]{Catalog Files} \index[dir]{Directive!Catalog Files} @@ -3022,7 +3022,7 @@ The Pool Resource defined in the Director's configuration file restore} command nor any other command that references File entries. \label{PoolAutoPrune} - \label{Pool:AutoPrune} + \label{Director:Pool:AutoPrune} \item [AutoPrune = \lt{}yes\vb{}no\gt{}] \index[dir]{AutoPrune} \index[dir]{Directive!AutoPrune} @@ -3034,7 +3034,7 @@ The Pool Resource defined in the Director's configuration file the Volume. \label{VolRetention} - \label{Pool:VolumeRetention} + \label{Director:Pool:VolumeRetention} \item [Volume Retention = \lt{}time-period-specification\gt{}] \index[dir]{Volume Retention} \index[dir]{Directive!Volume Retention} @@ -3081,7 +3081,7 @@ The Pool Resource defined in the Director's configuration file what is stored for the Volume. To change the value for an existing Volume you must use the {\bf update} command in the Console. -\label{Pool:ActionOnPurge} +\label{Director:Pool:ActionOnPurge} \item [Action On Purge = \lt{Truncate}] \index[dir]{actiononpurge} @@ -3114,7 +3114,7 @@ Job { \end{lstlisting} \label{PoolScratchPool} - \label{Pool:ScrachPool} + \label{Director:Pool:ScrachPool} \item [ScratchPool = \lt{}pool-resource-name\gt{}] \index[dir]{ScrachPool} \index[dir]{Directive!ScrachPool} @@ -3126,7 +3126,7 @@ Job { dedicate volumes to a particular set of pool. \label{PoolRecyclePool} - \label{Pool:RecyclePool} + \label{Director:Pool:RecyclePool} \item [RecyclePool = \lt{}pool-resource-name\gt{}] \index[dir]{RecyclePool} \index[dir]{Directive!RecyclePool} @@ -3147,7 +3147,7 @@ Job { \label{PoolRecycle} - \label{Pool:Recycle} + \label{Director:Pool:Recycle} \item [Recycle = \lt{}yes\vb{}no\gt{}] \index[dir]{Recycle} \index[dir]{Directive!Recycle} @@ -3177,7 +3177,7 @@ Job { \label{RecycleOldest} - \label{Pool:RecycleOldestVolume} + \label{Director:Pool:RecycleOldestVolume} \item [Recycle Oldest Volume = \lt{}yes\vb{}no\gt{}] \index[dir]{Recycle Oldest Volume} \index[dir]{Directive!Recycle Oldest Volume} @@ -3202,7 +3202,7 @@ Job { \label{RecycleCurrent} - \label{Pool:RecycleCurrentVolume} + \label{Director:Pool:RecycleCurrentVolume} \item [Recycle Current Volume = \lt{}yes\vb{}no\gt{}] \index[dir]{Recycle Current Volume} \index[dir]{Directive!Recycle Current Volume} @@ -3226,7 +3226,7 @@ Job { \label{PurgeOldest} - \label{Pool:PurgeOldestVolume} + \label{Director:Pool:PurgeOldestVolume} \item [Purge Oldest Volume = \lt{}yes\vb{}no\gt{}] \index[dir]{Purge Oldest Volume} \index[dir]{Directive!Purge Oldest Volume} @@ -3256,7 +3256,7 @@ Job { sure that some day, Bacula will recycle a Volume that contains current data. The default is {\bf no}. - \label{Pool:FileRetention} + \label{Director:Pool:FileRetention} \item [File Retention = \lt{}time-period-specification\gt{}] \index[dir]{File Retention} \index[dir]{Directive!File Retention} @@ -3274,7 +3274,7 @@ Job { For more information see Client documentation about \ilink{FileRetention}{FileRetention} - \label{Pool:JobRetention} + \label{Director:Pool:JobRetention} \item [Job Retention = \lt{}time-period-specification\gt{}] \index[dir]{Job Retention} \index[dir]{Directive!Job Retention} @@ -3291,7 +3291,7 @@ Job { For more information see Client side documentation \ilink{JobRetention}{JobRetention} - \label{Pool:CleaningPrefix} + \label{Director:Pool:CleaningPrefix} \item [Cleaning Prefix = \lt{}string\gt{}] \index[dir]{Cleaning Prefix} \index[dir]{Directive!Cleaning Prefix} @@ -3303,7 +3303,7 @@ Job { beginning with {\bf CLN} are treated as cleaning tapes. \label{Label} - \label{Pool:LabelFormat} + \label{Director:Pool:LabelFormat} \item [Label Format = \lt{}format\gt{}] \index[dir]{Label Format} \index[dir]{Directive!Label Format} @@ -3409,7 +3409,7 @@ or on a different machine on the network. See below for more details. defined. - \label{Catalog:Name} + \label{Director:Catalog:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} @@ -3418,14 +3418,14 @@ defined. indicating that all catalog data for that Client is maintained in this Catalog. This directive is required. - \label{Catalog:Password} + \label{Director:Catalog:Password} \item [password = \lt{}password\gt{}] \index[dir]{password} \index[dir]{Directive!password} This specifies the password to use when logging into the database. This directive is required. - \label{Catalog:DbName} + \label{Director:Catalog:DbName} \item [DB Name = \lt{}name\gt{}] \index[dir]{DB Name} \index[dir]{Directive!DB Name} @@ -3435,14 +3435,14 @@ defined. that is known to the server (i.e. you explicitly created the Bacula tables using this name. This directive is required. - \label{Catalog:User} + \label{Director:Catalog:User} \item [user = \lt{}user\gt{}] \index[dir]{user} \index[dir]{Directive!user} This specifies what user name to use to log into the database. This directive is required. - \label{Catalog:DbSocket} + \label{Director:Catalog:DbSocket} \item [DB Socket = \lt{}socket-name\gt{}] \index[dir]{DB Socket} \index[dir]{Directive!DB Socket} @@ -3452,7 +3452,7 @@ defined. will use the default socket. If the DB Socket is specified, the MySQL server must reside on the same machine as the Director. - \label{Catalog:DBAddress} + \label{Director:Catalog:DBAddress} \item [DB Address = \lt{}address\gt{}] \index[dir]{DB Address} \index[dir]{Directive!DB Address} @@ -3462,7 +3462,7 @@ defined. only by MySQL and PostgreSQL and is ignored by SQLite if provided. This directive is optional. - \label{Catalog:DbPort} + \label{Director:Catalog:DbPort} \item [DB Port = \lt{}port\gt{}] \index[dir]{DB Port} \index[dir]{Directive!DB Port} @@ -3585,7 +3585,7 @@ directives are permitted within the Director's configuration resource: \begin{description} - \label{Console:Name} + \label{Director:Console:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} @@ -3593,7 +3593,7 @@ directives are permitted within the Director's configuration resource: Console's configuration resource (much as is the case with Client definitions). - \label{Console:Password} + \label{Director:Console:Password} \item [Password = \lt{}password\gt{}] \index[dir]{Password} \index[dir]{Directive!Password} @@ -3610,7 +3610,7 @@ definitions). process. However, it is preferable for security reasons to choose random text. - \label{Console:JobAcl} + \label{Director:Console:JobAcl} \item [JobACL = \lt{}name-list\gt{}] \index[dir]{JobACL} \index[dir]{Directive!JobACL} @@ -3632,7 +3632,7 @@ definitions). With the above specification, the console can access the Director's resources for the four jobs named on the JobACL directives, but for no others. - \label{Console:ClientAcl} + \label{Director:Console:ClientAcl} \item [ClientACL = \lt{}name-list\gt{}] \index[dir]{ClientACL} \index[dir]{Directive!ClientACL} @@ -3640,49 +3640,49 @@ for the four jobs named on the JobACL directives, but for no others. be accessed by the console. - \label{Console:StorageAcl} + \label{Director:Console:StorageAcl} \item [StorageACL = \lt{}name-list\gt{}] \index[dir]{StorageACL} \index[dir]{Directive!StorageACL} This directive is used to specify a list of Storage resource names that can be accessed by the console. - \label{Console:ScheduleAcl} + \label{Director:Console:ScheduleAcl} \item [ScheduleACL = \lt{}name-list\gt{}] \index[dir]{ScheduleACL} \index[dir]{Directive!ScheduleACL} This directive is used to specify a list of Schedule resource names that can be accessed by the console. - \label{Console:PoolAcl} + \label{Director:Console:PoolAcl} \item [PoolACL = \lt{}name-list\gt{}] \index[dir]{PoolACL} \index[dir]{Directive!PoolACL} This directive is used to specify a list of Pool resource names that can be accessed by the console. - \label{Console:FileSetAcl} + \label{Director:Console:FileSetAcl} \item [FileSetACL = \lt{}name-list\gt{}] \index[dir]{FileSetACL} \index[dir]{Directive!FileSetACL} This directive is used to specify a list of FileSet resource names that can be accessed by the console. - \label{Console:CatalogAcl} + \label{Director:Console:CatalogAcl} \item [CatalogACL = \lt{}name-list\gt{}] \index[dir]{CatalogACL} \index[dir]{Directive!CatalogACL} This directive is used to specify a list of Catalog resource names that can be accessed by the console. - \label{Console:CommandAcl} + \label{Director:Console:CommandAcl} \item [CommandACL = \lt{}name-list\gt{}] \index[dir]{CommandACL} \index[dir]{Directive!CommandACL} This directive is used to specify a list of of console commands that can be executed by the console. - \label{Console:WhereAcl} + \label{Director:Console:WhereAcl} \item [WhereACL = \lt{}string\gt{}] \index[dir]{WhereACL} \index[dir]{Directive!WhereACL} @@ -3724,21 +3724,21 @@ details. \index[dir]{Directive!Counter} Start of the Counter resource. Counter directives are optional. - \label{Counter:Name} + \label{Director:Counter:Name} \item [Name = \lt{}name\gt{}] \index[dir]{Name} \index[dir]{Directive!Name} The name of the Counter. This is the name you will use in the variable expansion to reference the counter value. - \label{Counter:Minimum} + \label{Director:Counter:Minimum} \item [Minimum = \lt{}integer\gt{}] \index[dir]{Minimum} \index[dir]{Directive!Minimum} This specifies the minimum value that the counter can have. It also becomes the default. If not supplied, zero is assumed. - \label{Counter:Maximum} + \label{Director:Counter:Maximum} \item [Maximum = \lt{}integer\gt{}] \index[dir]{Maximum} \index[dir]{Directive!Maximum} @@ -3748,7 +3748,7 @@ or set to zero, the counter can have a maximum value of 2,147,483,648 (2 to the 31 power). When the counter is incremented past this value, it is reset to the Minimum. - \label{Counter:*WrapCounter} + \label{Director:Counter:*WrapCounter} \item [*WrapCounter = \lt{}counter-name\gt{}] \index[dir]{*WrapCounter} \index[dir]{Directive!*WrapCounter} @@ -3757,7 +3757,7 @@ maximum and thus reset to the minimum, the counter specified on the {\bf WrapCounter} is incremented. (This is not currently implemented). - \label{Counter:Catalog} + \label{Director:Counter:Catalog} \item [Catalog = \lt{}catalog-name\gt{}] \index[dir]{Catalog} \index[dir]{Directive!Catalog} diff --git a/docs/manuals/en/main/filedconf.tex b/docs/manuals/en/main/filedconf.tex index 26c9abcd..45d4182f 100644 --- a/docs/manuals/en/main/filedconf.tex +++ b/docs/manuals/en/main/filedconf.tex @@ -46,6 +46,7 @@ Director connections. in the configuration file, since it defines the properties of the current client program. +\label{FileDaemon:FileDaemon:Name} \item [Name = \lt{}name\gt{}] \index[fd]{Name} \index[fd]{Directive!Name} @@ -54,6 +55,7 @@ Director connections. can be easily identified if you have multiple Clients. This directive is required. +\label{FileDaemon:FileDaemon:WorkingDirectory} \item [Working Directory = \lt{}Directory\gt{}] \index[fd]{Working Directory} \index[fd]{Directive!Working Directory} @@ -70,6 +72,7 @@ Director connections. the Director is temporarily put in this directory before being passed to the Storage daemon). +\label{FileDaemon:FileDaemon:PidDirectory} \item [Pid Directory = \lt{}Directory\gt{}] \index[fd]{Pid Directory} \index[fd]{Directive!Pid Directory} @@ -84,6 +87,7 @@ Director connections. not installing Bacula in the system directories, you can use the {\bf Working Directory} as defined above. +\label{FileDaemon:FileDaemon:HeartbeatInterval} \item [Heartbeat Interval = \lt{}time-interval\gt{}] \index[fd]{Heartbeat Interval} \index[fd]{Directive!Heartbeat Interval} @@ -120,6 +124,7 @@ Director connections. connections or traffic. +\label{FileDaemon:FileDaemon:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[fd]{Maximum Concurrent Jobs} \index[fd]{Directive!Maximum Concurrent Jobs} @@ -130,6 +135,7 @@ Director connections. status} request in the console at the same time as a Job is running, you will need to set this value greater than 1. +\label{FileDaemon:FileDaemon:FdAddresses} \item [FDAddresses = \lt{}IP-address-specification\gt{}] \index[fd]{FDAddresses} \index[fd]{Directive!FDAddresses} @@ -170,6 +176,7 @@ is not specified, the default will be used. If an ip section is specified, the resolution can be made either by IPv4 or IPv6. If ip4 is specified, then only IPv4 resolutions will be permitted, and likewise with ip6. +\label{FileDaemon:FileDaemon:FdPort} \item [FDPort = \lt{}port-number\gt{}] \index[fd]{FDPort} \index[fd]{Directive!FDPort} @@ -177,6 +184,7 @@ only IPv4 resolutions will be permitted, and likewise with ip6. connections. It must agree with the FDPort specified in the Client resource of the Director's configuration file. The default is 9102. +\label{FileDaemon:FileDaemon:FdAddress} \item [FDAddress = \lt{}IP-Address\gt{}] \index[fd]{FDAddress} \index[fd]{Directive!FDAddress} @@ -186,6 +194,7 @@ only IPv4 resolutions will be permitted, and likewise with ip6. dotted quadruple. If this record is not specified, the File daemon will bind to any available address (the default). +\label{FileDaemon:FileDaemon:FdSourceAddress} \item [FDSourceAddress = \lt{}IP-Address\gt{}] \index[fd]{FDSourceAddress} \index[fd]{Directive!FDSourceAddress} @@ -195,6 +204,7 @@ only IPv4 resolutions will be permitted, and likewise with ip6. dotted quadruple. If this record is not specified, the kernel will choose the best address according to the routing table (the default). +\label{FileDaemon:FileDaemon:SdConnectTimeout} \item [SDConnectTimeout = \lt{}time-interval\gt{}] \index[fd]{SDConnectTimeout} \index[fd]{Directive!SDConnectTimeout} @@ -202,6 +212,7 @@ only IPv4 resolutions will be permitted, and likewise with ip6. connect to the Storage daemon. The default is 30 minutes. If no connection is made in the specified time interval, the File daemon cancels the Job. +\label{FileDaemon:FileDaemon:MaximumNetworkBufferSize} \item [Maximum Network Buffer Size = \lt{}bytes\gt{}] \index[fd]{Maximum Network Buffer Size} \index[fd]{Directive!Maximum Network Buffer Size} @@ -218,6 +229,7 @@ only IPv4 resolutions will be permitted, and likewise with ip6. setting the Maximum Network Buffer Size to 32,768 in both the File daemon and in the Storage daemon. +\label{FileDaemon:FileDaemon:MaximumBandwidthPerJob} \item [Maximum Bandwidth Per Job = \lt{}speed\gt{}] \index[fd]{Maximum Bandwidth Per Job} \index[fd]{Directive!Maximum Bandwidth Per Job} @@ -225,6 +237,7 @@ only IPv4 resolutions will be permitted, and likewise with ip6. The speed parameter specifies the maximum allowed bandwidth that a job may use. The speed parameter should be specified in k/s, kb/s, m/s or mb/s. +\label{FileDaemon:FileDaemon:HeartbeatInterval} \item [Heartbeat Interval = \lt{}time-interval\gt{}] \index[console]{Heartbeat Interval} \index[console]{Directive!Heartbeat} @@ -278,6 +291,7 @@ permitted to contact this Client. in the Client configuration file. Each one specifies a Director that is allowed to connect to this Client. +\label{FileDaemon:Director:Name} \item [Name = \lt{}name\gt{}] \index[fd]{Name} \index[fd]{Directive!Name} @@ -287,6 +301,7 @@ permitted to contact this Client. the name are significant (i.e. S is not the same as s). This directive is required. +\label{FileDaemon:Director:Password} \item [Password = \lt{}password\gt{}] \index[fd]{Password} \index[fd]{Directive!Password} @@ -294,6 +309,7 @@ permitted to contact this Client. This password must be the same as the password specified in the Client resource in the Director's configuration file. This directive is required. +\label{FileDaemon:Director:MaximumBandwidthPerJob} \item [Maximum Bandwidth Per Job = \lt{}speed\gt{}] \index[fd]{Maximum Bandwidth Per Job} \index[fd]{Directive!Maximum Bandwidth Per Job} @@ -302,6 +318,7 @@ The speed parameter specifies the maximum allowed bandwidth that a job may use when started from this Director. The speed parameter should be specified in k/s, Kb/s, m/s or Mb/s. +\label{FileDaemon:Director:Monitor} \item [Monitor = \lt{}yes\vb{}no\gt{}] \index[fd]{Monitor} \index[fd]{Directive!Monitor} diff --git a/docs/manuals/en/main/migration.tex b/docs/manuals/en/main/migration.tex index 048a2714..c4ac6558 100644 --- a/docs/manuals/en/main/migration.tex +++ b/docs/manuals/en/main/migration.tex @@ -125,6 +125,7 @@ are used to define a Migration job. automatically upgraded to a Backup rather than a Copy, and it will subsequently be used for restoration. +\label{Director:Job:SelectionType} \item [Selection Type = \lt{}Selection-type-keyword\gt{}] The \lt{}Selection-type-keyword\gt{} determines how the migration job will go about selecting what JobIds to migrate. In most cases, it is @@ -208,6 +209,7 @@ database \end{description} +\label{Director:Job:SelectionPattern} \item [Selection Pattern = \lt{}Quoted-string\gt{}] The Selection Patterns permitted for each Selection-type-keyword are described above. @@ -222,7 +224,8 @@ database For the SQLQuery keyword, this pattern must be a valid SELECT SQL statement that returns JobIds. -\item [ Purge Migration Job = \lt{}yes/no\gt{}] +\label{Director:Job:PurgeMigrationJob} +\item [Purge Migration Job = \lt{}yes/no\gt{}] This directive may be added to the Migration Job definition in the Director configuration file to purge the job migrated at the end of a migration. @@ -234,12 +237,14 @@ The following directives can appear in a Director's Pool resource, and they are used to define a Migration job. \begin{description} +\label{Director:Pool:MigrationTime} \item [Migration Time = \lt{}time-specification\gt{}] If a PoolTime migration is done, the time specified here in seconds (time modifiers are permitted -- e.g. hours, ...) will be used. If the previous Backup Job or Jobs selected have been in the Pool longer than the specified PoolTime, then they will be migrated. +\label{Director:Pool:MigrationHighBytes} \item [Migration High Bytes = \lt{}byte-specification\gt{}] This directive specifies the number of bytes in the Pool which will trigger a migration if a {\bf PoolOccupancy} migration selection @@ -252,6 +257,7 @@ are used to define a Migration job. may not be what you want, as the Pool count of all bytes will be for all Media Types combined. +\label{Director:Pool:MigrationLowBytes} \item [Migration Low Bytes = \lt{}byte-specification\gt{}] This directive specifies the number of bytes in the Pool which will stop a migration if a {\bf PoolOccupancy} migration selection @@ -262,12 +268,14 @@ are used to define a Migration job. migration job will continue to run jobs until the number of bytes in the Pool drop to or below Migration Low Bytes. +\label{Director:Pool:NextPool} \item [Next Pool = \lt{}pool-specification\gt{}] The Next Pool directive specifies the pool to which Jobs will be migrated. This directive is required to define the Pool into which the data will be migrated. Without this directive, the migration job will terminate in error. +\label{Director:Pool:Storage} \item [Storage = \lt{}storage-specification\gt{}] The Storage directive specifies what Storage resource will be used for all Jobs that use this Pool. It takes precedence over any other diff --git a/docs/manuals/en/main/storedconf.tex b/docs/manuals/en/main/storedconf.tex index 764481a2..531f2602 100644 --- a/docs/manuals/en/main/storedconf.tex +++ b/docs/manuals/en/main/storedconf.tex @@ -50,11 +50,13 @@ have one and only one Storage resource definition. \begin{description} +\label{Storage:Storage:Name} \item [Name = \lt{}Storage-Daemon-Name\gt{}] \index[sd]{Name} \index[sd]{Directive!Name} Specifies the Name of the Storage daemon. This directive is required. +\label{Storage:Storage:WorkingDirectory} \item [Working Directory = \lt{}Directory\gt{}] \index[sd]{Working Directory} \index[sd]{Directive!Working Directory} @@ -64,6 +66,7 @@ have one and only one Storage resource definition. given to each daemon are unique. This directive is required +\label{Storage:Storage:PidDirectory} \item [Pid Directory = \lt{}Directory\gt{}] \index[sd]{Pid Directory} \index[sd]{Directive!Pid Directory} @@ -78,6 +81,7 @@ have one and only one Storage resource definition. not installing Bacula in the system directories, you can use the {\bf Working Directory} as defined above. +\label{Storage:Storage:HeartbeatInterval} \item [Heartbeat Interval = \lt{}time-interval\gt{}] \index[sd]{Heartbeat Interval} \index[sd]{Directive!Heartbeat Interval} @@ -93,6 +97,7 @@ have one and only one Storage resource definition. duration despite the fact that keepalive is set. This usually results in a broken pipe error message. +\label{Storage:Storage:ClientConnectWait} \item [Client Connect Wait = \lt{}time-interval\gt{}] \index[sd]{Connect Wait} \index[sd]{Directive!Connect Wait} @@ -103,6 +108,7 @@ have one and only one Storage resource definition. longer the Storage daemon waits for a Client, the more resources will be tied up. +\label{Storage:Storage:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[sd]{Maximum Concurrent Jobs} \index[sd]{Directive!Maximum Concurrent Jobs} @@ -118,6 +124,7 @@ have one and only one Storage resource definition. the Storage resource in the Director's configuration file and possibly those in the Job and Client resources. +\label{Storage:Storage:SDAddresses} \item [SDAddresses = \lt{}IP-address-specification\gt{}] \index[sd]{SDAddresses} \index[sd]{Directive!SDAddresses} @@ -164,12 +171,14 @@ only IPv4 resolutions will be permitted, and likewise with ip6. Using this directive, you can replace both the SDPort and SDAddress directives shown below. +\label{Storage:Storage:SdPort} \item [SDPort = \lt{}port-number\gt{}] \index[sd]{SDPort} \index[sd]{Directive!SDPort} Specifies port number on which the Storage daemon listens for Director connections. The default is 9103. +\label{Storage:Storage:SdAddress} \item [SDAddress = \lt{}IP-Address\gt{}] \index[sd]{SDAddress} \index[sd]{Directive!SDAddress} @@ -211,18 +220,21 @@ values in the Director's configuration file. \begin{description} +\label{Storage:Director:Name} \item [Name = \lt{}Director-Name\gt{}] \index[sd]{Name} \index[sd]{Directive!Name} Specifies the Name of the Director allowed to connect to the Storage daemon. This directive is required. +\label{Storage:Director:Password} \item [Password = \lt{}Director-password\gt{}] \index[sd]{Password} \index[sd]{Directive!Password} Specifies the password that must be supplied by the above named Director. This directive is required. +\label{Storage:Director:Monitor} \item [Monitor = \lt{}yes\vb{}no\gt{}] \index[sd]{Monitor} \index[sd]{Directive!Monitor} @@ -260,6 +272,7 @@ specified within the Device resource are specific to the Device. \begin{description} +\label{Storage:Device:Name} \item [Name = {\it Device-Name}] \index[sd]{Name} \index[sd]{Directive!Name} @@ -273,6 +286,7 @@ specified within the Device resource are specific to the Device. \ilink{Device directive}{StorageResource2} in its Storage resource. +\label{Storage:Device:ArchiveDevice} \item [Archive Device = {\it name-string}] \index[sd]{Archive Device} \index[sd]{Directive!Archive Device} @@ -338,6 +352,7 @@ Device { The Archive Device directive is required. +\label{Storage:Device:DeviceType} \item [Device Type = {\it type-specification}] \index[sd]{Device Type} \index[sd]{Directive!Device Type} @@ -371,6 +386,7 @@ Device { This directive was implemented in Bacula version 1.38.6. +\label{Storage:Device:MediaType} \item [Media Type = {\it name-string}] \index[sd]{Media Type} \index[sd]{Directive!Media Type} @@ -404,6 +420,8 @@ Device { Bacula to select the correct Device resource, each one must have a unique Media Type. + +\label{Storage:Device:Autochanger} \label{Autochanger} \item [Autochanger = {\it yes\vb{}no}] \index[sd]{Autochanger} @@ -417,6 +435,7 @@ Device { \ilink{Storage resource}{Autochanger1} in the Director's configuration file so that when labeling tapes you are prompted for the slot. +\label{Storage:Device:ChangerDevice} \item [Changer Device = {\it name-string}] \index[sd]{Changer Device} \index[sd]{Directive!Changer Device} @@ -434,6 +453,7 @@ Device { of this manual for more details of using this and the following autochanger directives. +\label{Storage:Device:ChangerCommand} \item [Changer Command = {\it name-string}] \index[sd]{Changer Command} \index[sd]{Directive!Changer Command} @@ -459,6 +479,7 @@ Changer Command = "/path/mtx-changer %c %o %S %a %d" For FreeBSD users, you might want to see one of the several {\bf chio} scripts in {\bf examples/autochangers}. +\label{Storage:Device:AlertCommand} \item [Alert Command = {\it name-string}] \index[sd]{Alert Command} The {\bf name-string} specifies an external program to be called at the @@ -497,6 +518,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface \end{lstlisting} \normalsize +\label{Storage:Device:DriveIndex} \item [Drive Index = {\it number}] \index[sd]{Drive Index} \index[sd]{Directive!Drive Index} @@ -514,6 +536,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface the past -- the default mtx-changer script works for any number of drives. +\label{Storage:Device:Autoselect} \item [Autoselect = {\it yes\vb{}no}] \index[sd]{Autoselect} \index[sd]{Directive!Autoselect} @@ -535,6 +558,7 @@ when the Maximum Concurrent Jobs limit is reached, the Storage Daemon will start new Jobs on any other available compatible drive. This facilitates writing to multiple drives with multiple Jobs that all use the same Pool. +\label{Storage:Device:MaximumChangerWait} \item [Maximum Changer Wait = {\it time}] \index[sd]{Maximum Changer Wait} \index[sd]{Directive!Maximum Changer Wait} @@ -546,6 +570,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. % TODO: if this is the format, then maybe "5 minutes" should be in % TODO: quotes? define style. see others. +\label{Storage:Device:MaximumRewindWait} \item [Maximum Rewind Wait = {\it time}] \index[sd]{Maximum Rewind Wait} \index[sd]{Directive!Maximum Rewind Wait} @@ -553,6 +578,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. for a rewind before timing out. If this time is exceeded, Bacula will cancel the job. The default is 5 minutes. +\label{Storage:Device:MaximumOpenWait} \item [Maximum Open Wait = {\it time}] \index[sd]{Maximum Open Wait} \index[sd]{Directive!Maximum Open Wait} @@ -560,6 +586,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. for a open before timing out. If this time is exceeded, Bacula will cancel the job. The default is 5 minutes. +\label{Storage:Device:AlwaysOpen} \item [Always Open = {\it yes\vb{}no}] \index[sd]{Always Open} \index[sd]{Directive!Always Open} @@ -592,6 +619,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. drive autochanger operations will fail. We strongly recommend to keep {\bf Always Open} set to {\bf Yes} +\label{Storage:Device:VolumePollInterval} \item [Volume Poll Interval = {\it time}] \index[sd]{Volume Poll Interval} \index[sd]{Directive!Volume Poll Interval} @@ -614,7 +642,8 @@ writing to multiple drives with multiple Jobs that all use the same Pool. \bsysxrlink{description of Offline On Unmount}{NoTapeInDrive}{problems}{subsection} in the \bsysxrlink{Tape Testing}{TapeTestingChapter}{problems}{chapter} of the \problemsman{}. -\item [Close on Poll= {\it yes\vb{}no}] +\label{Storage:Device:CloseOnPoll} +\item [Close on Poll = {\it yes\vb{}no}] \index[sd]{Close on Poll} \index[sd]{Directive!Close on Poll} If {\bf Yes}, Bacula close the device (equivalent to an unmount except no @@ -625,6 +654,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. the drive on the next poll and automatically continue with the backup. Please see above more more details. +\label{Storage:Device:MaximumOpenWait} \item [Maximum Open Wait = {\it time}] \index[sd]{Maximum Open Wait} \index[sd]{Directive!Maximum Open Wait} @@ -634,8 +664,10 @@ writing to multiple drives with multiple Jobs that all use the same Pool. error. Bacula will re-attempt to open the drive the next time a Job starts that needs the the drive. + +\label{Storage:Device:RemovableMedia} \label{removablemedia} -\item [Removable media = {\it yes\vb{}no}] +\item [Removable Media = {\it yes\vb{}no}] \index[sd]{Removable media} \index[sd]{Directive!Removable media} If {\bf Yes}, this device supports removable media (for example, tapes @@ -660,7 +692,8 @@ writing to multiple drives with multiple Jobs that all use the same Pool. {\bf Removable Media}. -\item [Random access = {\it yes\vb{}no}] +\label{Storage:Device:RandomAccess} +\item [Random Access = {\it yes\vb{}no}] \index[sd]{Random access} \index[sd]{Directive!Random access} If {\bf Yes}, the archive device is assumed to be a random access medium @@ -670,6 +703,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. {\bf No} for non-random access devices such as tapes and named pipes. +\label{Storage:Device:RequiresMount} \item [Requires Mount = {\it yes\vb{}no}] \index[sd]{Requires Mount } When this directive is enabled, the Storage daemon will submit @@ -687,6 +721,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. directives must also be defined: {\bf Mount Point}, {\bf Mount Command}, and {\bf Unmount Command}. +\label{Storage:Device:MountPoint} \item [Mount Point = {\it directory}] \index[sd]{Mount Point} Directory where the device can be mounted. @@ -694,6 +729,7 @@ writing to multiple drives with multiple Jobs that all use the same Pool. for devices that have {\bf Requires Mount} enabled such as USB file devices. +\label{Storage:Device:MountCommand} \item [Mount Command = {\it name-string}] \index[sd]{Mount Command} This directive specifies the command that must be executed to mount @@ -706,6 +742,7 @@ the editing codes that can be used in this directive. If you need to specify multiple commands, create a shell script. +\label{Storage:Device:UnmountCommand} \item [Unmount Command = {\it name-string}] \index[sd]{Unmount Command} This directive specifies the command that must be executed to unmount @@ -740,6 +777,7 @@ the editing codes that can be used in this directive. drives or for disk Volumes where doing so may allow corrupted data to go undetected. +\label{Storage:Device:MinimumBlockSize} \item [Minimum block size = {\it size-in-bytes}] \index[sd]{Minimum block size} \index[sd]{Directive!Minimum block size} @@ -788,6 +826,7 @@ the editing codes that can be used in this directive. \end{lstlisting} \normalsize +\label{Storage:Device:MaximumBlockSize} \item [Maximum block size = {\it size-in-bytes}] \index[sd]{Maximum block size} \index[sd]{Directive!Maximum block size} @@ -806,6 +845,7 @@ the editing codes that can be used in this directive. The maximum {\bf size-in-bytes} possible is 2,000,000. +\label{Storage:Device:HardwareEndOfMedium} \item [Hardware End of Medium = {\it yes\vb{}no}] \index[sd]{Hardware End of Medium} \index[sd]{Directive!Hardware End of Medium} @@ -829,6 +869,7 @@ the editing codes that can be used in this directive. supports this function. All modern (after 1998) tape drives support this feature. +\label{Storage:Device:FastForwardSpaceFile} \item [Fast Forward Space File = {\it yes\vb{}no}] \index[sd]{Fast Forward Space File} \index[sd]{Directive!Fast Forward Space File} @@ -843,6 +884,7 @@ the editing codes that can be used in this directive. Default setting for Fast Forward Space File is {\bf Yes}. +\label{Storage:Device:UseMtiocget} \item [Use MTIOCGET = {\it yes\vb{}no}] \index[sd]{Use MTIOCGET} \index[sd]{Directive!Use MTIOCGET} @@ -855,6 +897,7 @@ the editing codes that can be used in this directive. on a few *BSD systems. Operating systems known to work correctly are Solaris, Linux and FreeBSD. +\label{Storage:Device:BsfAtEom} \item [BSF at EOM = {\it yes\vb{}no}] \index[sd]{BSF at EOM} \index[sd]{Directive!BSF at EOM} @@ -869,6 +912,8 @@ the editing codes that can be used in this directive. the second EOF mark. Determination of whether or not you need this directive is done using the {\bf test} command in the {\bf btape} program. + +\label{Storage:Device:TwoEof} \item [TWO EOF = {\it yes\vb{}no}] \index[sd]{TWO EOF} \index[sd]{Directive!TWO EOF} @@ -876,6 +921,7 @@ the editing codes that can be used in this directive. tape -- i.e. after the last job or at the end of the medium. If {\bf No}, the default, Bacula will only write one end of file to terminate the tape. +\label{Storage:Device:BackwardSpaceRecord} \item [Backward Space Record = {\it yes\vb{}no}] \index[sd]{Backward Space Record} \index[sd]{Directive!Backward Space Record} @@ -888,6 +934,7 @@ the editing codes that can be used in this directive. function off, the test will not be done. This causes no harm as the re-read process is precautionary rather than required. +\label{Storage:Device:BackwardSpaceFile} \item [Backward Space File = {\it yes\vb{}no}] \index[sd]{Backward Space File} \index[sd]{Directive!Backward Space File} @@ -897,6 +944,7 @@ the editing codes that can be used in this directive. advanced forward to the desired position. Default is {\bf Yes} for non random-access devices. +\label{Storage:Device:ForwardSpaceRecord} \item [Forward Space Record = {\it yes\vb{}no}] \index[sd]{Forward Space Record} \index[sd]{Directive!Forward Space Record} @@ -905,6 +953,7 @@ the editing codes that can be used in this directive. advance the position on the device. Default is {\bf Yes} for non random-access devices. +\label{Storage:Device:ForwardSpaceFile} \item [Forward Space File = {\it yes\vb{}no}] \index[sd]{Forward Space File} \index[sd]{Directive!Forward Space File} @@ -912,6 +961,7 @@ the editing codes that can be used in this directive. forward space by file marks. If {\it No}, data must be read to advance the position on the device. Default is {\bf Yes} for non random-access devices. +\label{Storage:Device:OfflineOnUnmount} \item [Offline On Unmount = {\it yes\vb{}no}] \index[sd]{Offline On Unmount} \index[sd]{Directive!Offline On Unmount} @@ -935,6 +985,7 @@ the editing codes that can be used in this directive. in the \bsysxrlink{Tape Testing}{TapeTestingChapter}{problems}{chapter} of the \problemsman{}. +\label{Storage:Device:MaximumConcurrentJobs} \item [Maximum Concurrent Jobs = \lt{}number\gt{}] \index[sd]{Device Maximum Concurrent Jobs} \index[sd]{Directive!Device Maximum Concurrent Jobs} @@ -947,6 +998,7 @@ the editing codes that can be used in this directive. compatible drive. This facilitates writing to multiple drives with multiple Jobs that all use the same Pool. +\label{Storage:Device:MaximumVolumeSize} \item [Maximum Volume Size = {\it size}] \index[sd]{Maximum Volume Size} \index[sd]{Directive!Maximum Volume Size} @@ -960,6 +1012,7 @@ the editing codes that can be used in this directive. directive is deprecated (being phased out) in favor of the {\bf Maximum Volume Bytes} defined in the Director's configuration file. +\label{Storage:Device:MaximumFileSize} \item [Maximum File Size = {\it size}] \index[sd]{Maximum File Size} \index[sd]{Directive!Maximum File Size} @@ -990,6 +1043,7 @@ the editing codes that can be used in this directive. {\bf Maximum Volume Bytes} directive in the Director's Pool resource, which does the same thing but on a Pool (Volume) basis. +\label{Storage:Device:BlockPositioning} \item [Block Positioning = {\it yes\vb{}no}] \index[sd]{Block Positioning} \index[sd]{Directive!Block Positioning} @@ -999,6 +1053,7 @@ the editing codes that can be used in this directive. tapes with Bacula in variable block mode (the default), but your drive was in fixed block mode. The default is {\bf yes}. +\label{Storage:Device:MaximumNetworkBufferSize} \item [Maximum Network Buffer Size = {\it bytes}] \index[sd]{Maximum Network Buffer Size} \index[sd]{Directive!Maximum Network Buffer Size} @@ -1020,12 +1075,14 @@ the editing codes that can be used in this directive. in each of your File daemons conf files. +\label{Storage:Device:MaximumSpoolSize} \item [Maximum Spool Size = {\it bytes}] \index[sd]{Maximum Spool Size} \index[sd]{Directive!Maximum Spool Size} where the bytes specify the maximum spool size for all jobs that are running. The default is no limit. +\label{Storage:Device:MaximumJobSpoolSize} \item [Maximum Job Spool Size = {\it bytes}] \index[sd]{Maximum Job Spool Size} \index[sd]{Directive!Maximum Job Spool Size} @@ -1033,6 +1090,7 @@ the editing codes that can be used in this directive. running. The default is no limit. This directive is implemented only in version 1.37 and later. +\label{Storage:Device:SpoolDirectory} \item [Spool Directory = {\it directory}] \index[sd]{Spool Directory} \index[sd]{Directive!Spool Directory} @@ -1041,6 +1099,7 @@ the editing codes that can be used in this directive. writing to a device that requires mount (USB). The default is to use the working directory. +\label{Storage:Device:MaximumPartSize} \item [Maximum Part Size = {\it bytes}] \index[sd]{Maximum Part Size} \index[sd]{Directive!Maximum Part Size} @@ -1092,6 +1151,7 @@ apply to removable filesystems such as USB. \begin{description} +\label{Storage:Device:RequiresMount} \item [Requires Mount = {\it yes\vb{}no}] \index[sd]{Requires Mount} \index[sd]{Directive!Requires Mount} @@ -1102,11 +1162,13 @@ apply to removable filesystems such as USB. set, {\bf Mount Point}, {\bf Mount Command}, {\bf Unmount Command} and {\bf Write Part Command} directives must also be defined. +\label{Storage:Device:MountPoint} \item [Mount Point = {\it directory}] \index[sd]{Mount Point} \index[sd]{Directive!Mount Point} Directory where the device can be mounted. +\label{Storage:Device:MountCommand} \item [Mount Command = {\it name-string}] \index[sd]{Mount Command} \index[sd]{Directive!Mount Command} @@ -1145,6 +1207,7 @@ mount /dev/ndas-00323794-0p1 /backup Similar consideration should be given to all other Command parameters. +\label{Storage:Device:UnmountCommand} \item [Unmount Command = {\it name-string}] \index[sd]{Unmount Command} \index[sd]{Directive!Unmount Command} @@ -1174,6 +1237,7 @@ Similar consideration should be given to all other Command parameters. \begin{description} +\label{Storage:Device:LabelMedia} \item [Label Media = {\it yes\vb{}no}] \index[general]{Label Media} \index[sd]{Label Media} @@ -1186,6 +1250,7 @@ Similar consideration should be given to all other Command parameters. when the tape has been recycled. The automatic labeling feature is most useful when writing to disk rather than tape volumes. +\label{Storage:Device:AutomaticMount} \item [Automatic mount = {\it yes\vb{}no}] \index[sd]{Automatic mount} \index[sd]{Directive!Automatic mount}