From: Simon Glass <sjg@chromium.org>
Date: Thu, 28 Jul 2016 02:33:07 +0000 (-0600)
Subject: Drop the MAKEALL tool
X-Git-Tag: v2016.09-rc2~143
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c8a3777c51b9e375d88e3a0dfa0141f1ac89df3a;p=u-boot

Drop the MAKEALL tool

Buildman has been around for 3 years now. It has had a lot of use and
testing. Perhaps it is time to remove MAKEALL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/MAKEALL b/MAKEALL
deleted file mode 100755
index 7e42f10933..0000000000
--- a/MAKEALL
+++ /dev/null
@@ -1,850 +0,0 @@
-#!/bin/bash
-# Tool mainly for U-Boot Quality Assurance: build one or more board
-# configurations with minimal verbosity, showing only warnings and
-# errors.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-
-usage()
-{
-	# if exiting with 0, write to stdout, else write to stderr
-	local ret=${1:-0}
-	[ "${ret}" -eq 1 ] && exec 1>&2
-	cat <<-EOF
-	Usage: MAKEALL [options] [--] [boards-to-build]
-
-	Options:
-	  -a ARCH,   --arch ARCH       Build all boards with arch ARCH
-	  -c CPU,    --cpu CPU         Build all boards with cpu CPU
-	  -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
-	  -s SOC,    --soc SOC         Build all boards with soc SOC
-	  -b BOARD,  --board BOARD     Build all boards with board name BOARD
-	  -l,        --list            List all targets to be built
-	  -m,        --maintainers     List all targets and maintainer email
-	  -M,        --mails           List all targets and all affilated emails
-	  -C,        --check           Enable build checking
-	  -n,        --continue        Continue (skip boards already built)
-	  -r,        --rebuild-errors  Rebuild any boards that errored
-	  -h,        --help            This help output
-
-	Selections by these options are logically ANDed; if the same option
-	is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
-	will select all configurations where the vendor is either FOO or
-	BAR.  Any additional arguments specified on the command line are
-	always build additionally.  See the boards.cfg file for more info.
-
-	If no boards are specified, then the default is "powerpc".
-
-	Environment variables:
-	  BUILD_NCPUS      number of parallel make jobs (default: auto)
-	  CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
-	  CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
-			   architecture "ARCH".  Substitute "ARCH" for any
-			   supported architecture (default: "")
-	  MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
-	  BUILD_DIR        output build directory (default: ./)
-	  BUILD_NBUILDS	   number of parallel targets (default: 1)
-
-	Examples:
-	  - build all Power Architecture boards:
-	      MAKEALL -a powerpc
-	      MAKEALL --arch powerpc
-	      MAKEALL powerpc
-	  - build all PowerPC boards manufactured by vendor "esd":
-	      MAKEALL -a powerpc -v esd
-	  - build all PowerPC boards manufactured either by "keymile" or "siemens":
-	      MAKEALL -a powerpc -v keymile -v siemens
-	  - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
-	      MAKEALL -c mpc83xx -v freescale 4xx
-	EOF
-	exit ${ret}
-}
-
-deprecation() {
-	echo "** Note: MAKEALL is deprecated - please use buildman instead"
-	echo "** See tools/buildman/README for details"
-	echo
-}
-
-deprecation
-
-SHORT_OPTS="ha:c:v:s:b:lmMCnr"
-LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
-
-# Option processing based on util-linux-2.13/getopt-parse.bash
-
-# Note that we use `"$@"' to let each command-line parameter expand to a
-# separate word. The quotes around `$@' are essential!
-# We need TEMP as the `eval set --' would nuke the return value of
-# getopt.
-TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
-     -n 'MAKEALL' -- "$@"`
-
-[ $? != 0 ] && usage 1
-
-# Note the quotes around `$TEMP': they are essential!
-eval set -- "$TEMP"
-
-SELECTED=''
-ONLY_LIST=''
-PRINT_MAINTS=''
-MAINTAINERS_ONLY=''
-CONTINUE=''
-REBUILD_ERRORS=''
-
-while true ; do
-	case "$1" in
-	-a|--arch)
-		# echo "Option ARCH: argument \`$2'"
-		if [ "$opt_a" ] ; then
-			opt_a="${opt_a%)} || \$2 == \"$2\")"
-		else
-			opt_a="(\$2 == \"$2\")"
-		fi
-		SELECTED='y'
-		shift 2 ;;
-	-c|--cpu)
-		# echo "Option CPU: argument \`$2'"
-		if [ "$opt_c" ] ; then
-			opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
-		else
-			opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
-		fi
-		SELECTED='y'
-		shift 2 ;;
-	-s|--soc)
-		# echo "Option SoC: argument \`$2'"
-		if [ "$opt_s" ] ; then
-			opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
-		else
-			opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
-		fi
-		SELECTED='y'
-		shift 2 ;;
-	-v|--vendor)
-		# echo "Option VENDOR: argument \`$2'"
-		if [ "$opt_v" ] ; then
-			opt_v="${opt_v%)} || \$5 == \"$2\")"
-		else
-			opt_v="(\$5 == \"$2\")"
-		fi
-		SELECTED='y'
-		shift 2 ;;
-	-b|--board)
-		# echo "Option BOARD: argument \`$2'"
-		if [ "$opt_b" ] ; then
-			opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
-		else
-			# We need to check the 7th field too
-			# for boards whose 6th field is "-"
-			opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
-		fi
-		SELECTED='y'
-		shift 2 ;;
-	-C|--check)
-		CHECK='C=1'
-		shift ;;
-	-n|--continue)
-		CONTINUE='y'
-		shift ;;
-	-r|--rebuild-errors)
-		REBUILD_ERRORS='y'
-		shift ;;
-	-l|--list)
-		ONLY_LIST='y'
-		shift ;;
-	-m|--maintainers)
-		ONLY_LIST='y'
-		PRINT_MAINTS='y'
-		MAINTAINERS_ONLY='y'
-		shift ;;
-	-M|--mails)
-		ONLY_LIST='y'
-		PRINT_MAINTS='y'
-		shift ;;
-	-h|--help)
-		usage ;;
-	--)
-		shift ; break ;;
-	*)
-		echo "Internal error!" >&2 ; exit 1 ;;
-	esac
-done
-
-GNU_MAKE=$(scripts/show-gnu-make) || {
-	echo "GNU Make not found" >&2
-	exit 1
-}
-
-# echo "Remaining arguments:"
-# for arg do echo '--> '"\`$arg'" ; done
-
-tools/genboardscfg.py || {
-	echo "Failed to generate boards.cfg" >&2
-	exit 1
-}
-
-FILTER="\$1 !~ /^#/"
-[ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
-[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
-[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
-[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
-[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
-
-if [ "$SELECTED" ] ; then
-	SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
-
-	# Make sure some boards from boards.cfg are actually found
-	if [ -z "$SELECTED" ] ; then
-		echo "Error: No boards selected, invalid arguments"
-		exit 1
-	fi
-fi
-
-#########################################################################
-
-# Print statistics when we exit
-trap exit 1 2 3 15
-trap print_stats 0
-
-# Determine number of CPU cores if no default was set
-: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
-
-if [ "$BUILD_NCPUS" -gt 1 ]
-then
-	JOBS="-j $((BUILD_NCPUS + 1))"
-else
-	JOBS=""
-fi
-
-if [ "${MAKEALL_LOGDIR}" ] ; then
-	LOG_DIR=${MAKEALL_LOGDIR}
-else
-	LOG_DIR="LOG"
-fi
-
-: ${BUILD_NBUILDS:=1}
-BUILD_MANY=0
-
-if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
-	BUILD_MANY=1
-	: ${BUILD_DIR:=./build}
-	mkdir -p "${BUILD_DIR}/ERR"
-	find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
-fi
-
-: ${BUILD_DIR:=.}
-
-OUTPUT_PREFIX="${BUILD_DIR}"
-
-[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
-if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
-	find "${LOG_DIR}/" -type f -exec rm -f {} +
-fi
-
-LIST=""
-
-# Keep track of the number of builds and errors
-ERR_CNT=0
-ERR_LIST=""
-WRN_CNT=0
-WRN_LIST=""
-TOTAL_CNT=0
-SKIP_CNT=0
-CURRENT_CNT=0
-OLDEST_IDX=1
-RC=0
-
-# Helper funcs for parsing boards.cfg
-targets_by_field()
-{
-	field=$1
-	regexp=$2
-
-	awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
-								boards.cfg
-}
-
-targets_by_arch() { targets_by_field 2 "$@" ; }
-targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
-targets_by_soc()  { targets_by_field 4 "$@" ; }
-
-#########################################################################
-## MPC5xx Systems
-#########################################################################
-
-LIST_5xx="$(targets_by_cpu mpc5xx)"
-
-#########################################################################
-## MPC5xxx Systems
-#########################################################################
-
-LIST_5xxx="$(targets_by_cpu mpc5xxx)"
-
-#########################################################################
-## MPC512x Systems
-#########################################################################
-
-LIST_512x="$(targets_by_cpu mpc512x)"
-
-#########################################################################
-## MPC8xx Systems
-#########################################################################
-
-LIST_8xx="$(targets_by_cpu mpc8xx)"
-
-#########################################################################
-## PPC4xx Systems
-#########################################################################
-
-LIST_4xx="$(targets_by_cpu ppc4xx)"
-
-#########################################################################
-## MPC8260 Systems (includes 8250, 8255 etc.)
-#########################################################################
-
-LIST_8260="$(targets_by_cpu mpc8260)"
-
-#########################################################################
-## MPC83xx Systems (includes 8349, etc.)
-#########################################################################
-
-LIST_83xx="$(targets_by_cpu mpc83xx)"
-
-#########################################################################
-## MPC85xx Systems (includes 8540, 8560 etc.)
-#########################################################################
-
-LIST_85xx="$(targets_by_cpu mpc85xx)"
-
-#########################################################################
-## MPC86xx Systems
-#########################################################################
-
-LIST_86xx="$(targets_by_cpu mpc86xx)"
-
-#########################################################################
-## PowerPC groups
-#########################################################################
-
-LIST_TSEC="		\
-	${LIST_83xx}	\
-	${LIST_85xx}	\
-	${LIST_86xx}	\
-"
-
-LIST_powerpc="		\
-	${LIST_5xx}	\
-	${LIST_512x}	\
-	${LIST_5xxx}	\
-	${LIST_8xx}	\
-	${LIST_824x}	\
-	${LIST_8260}	\
-	${LIST_83xx}	\
-	${LIST_85xx}	\
-	${LIST_86xx}	\
-	${LIST_4xx}	\
-"
-
-# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
-# still using "ppc" instead of "powerpc"
-LIST_ppc="		\
-	${LIST_powerpc}	\
-"
-
-#########################################################################
-## StrongARM Systems
-#########################################################################
-
-LIST_SA="$(targets_by_cpu sa1100)"
-
-#########################################################################
-## ARM7 Systems
-#########################################################################
-
-LIST_ARM7="$(targets_by_cpu arm720t)"
-
-#########################################################################
-## ARM9 Systems
-#########################################################################
-
-LIST_ARM9="$(targets_by_cpu arm920t)	\
-	$(targets_by_cpu arm926ejs)	\
-	$(targets_by_cpu arm946es)	\
-"
-
-#########################################################################
-## ARM11 Systems
-#########################################################################
-LIST_ARM11="$(targets_by_cpu arm1136)	\
-	$(targets_by_cpu arm1176)	\
-"
-
-#########################################################################
-## ARMV7 Systems
-#########################################################################
-
-LIST_ARMV7="$(targets_by_cpu armv7)"
-
-#########################################################################
-## ARMV8 Systems
-#########################################################################
-
-LIST_ARMV8="$(targets_by_cpu armv8)"
-
-#########################################################################
-## AT91 Systems
-#########################################################################
-
-LIST_at91="$(targets_by_soc at91)"
-
-#########################################################################
-## Xscale Systems
-#########################################################################
-
-LIST_pxa="$(targets_by_cpu pxa)"
-
-#########################################################################
-## SPEAr Systems
-#########################################################################
-
-LIST_spear="$(targets_by_soc spear)"
-
-#########################################################################
-## ARM groups
-#########################################################################
-
-LIST_arm="$(targets_by_arch arm |		\
-	for ARMV8_TARGET in $LIST_ARMV8;	\
-		do sed "/$ARMV8_TARGET/d";	\
-	done)					\
-"
-
-#########################################################################
-## MIPS Systems		(default = big endian)
-#########################################################################
-
-LIST_mips="$(targets_by_arch mips)"
-
-#########################################################################
-## OpenRISC Systems
-#########################################################################
-
-LIST_openrisc="$(targets_by_arch openrisc)"
-
-#########################################################################
-## x86 Systems
-#########################################################################
-
-LIST_x86="$(targets_by_arch x86)"
-
-#########################################################################
-## Nios-II Systems
-#########################################################################
-
-LIST_nios2="$(targets_by_arch nios2)"
-
-#########################################################################
-## MicroBlaze Systems
-#########################################################################
-
-LIST_microblaze="$(targets_by_arch microblaze)"
-
-#########################################################################
-## ColdFire Systems
-#########################################################################
-
-LIST_m68k="$(targets_by_arch m68k)"
-LIST_coldfire=${LIST_m68k}
-
-#########################################################################
-## AVR32 Systems
-#########################################################################
-
-LIST_avr32="$(targets_by_arch avr32)"
-
-#########################################################################
-## Blackfin Systems
-#########################################################################
-
-LIST_blackfin="$(targets_by_arch blackfin)"
-
-#########################################################################
-## SH Systems
-#########################################################################
-
-LIST_sh2="$(targets_by_cpu sh2)"
-LIST_sh3="$(targets_by_cpu sh3)"
-LIST_sh4="$(targets_by_cpu sh4)"
-
-LIST_sh="$(targets_by_arch sh)"
-
-#########################################################################
-## SPARC Systems
-#########################################################################
-
-LIST_sparc="$(targets_by_arch sparc)"
-
-#########################################################################
-## NDS32 Systems
-#########################################################################
-
-LIST_nds32="$(targets_by_arch nds32)"
-
-#########################################################################
-## ARC Systems
-#########################################################################
-
-LIST_arc="$(targets_by_arch arc)"
-
-#-----------------------------------------------------------------------
-
-get_target_location() {
-	local target=$1
-	local BOARD_NAME=""
-	local CONFIG_NAME=""
-	local board=""
-	local vendor=""
-
-	# Automatic mode
-	local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
-	if [ -z "${line}" ] ; then echo "" ; return ; fi
-
-	set ${line}
-
-	CONFIG_NAME="${7%_defconfig}"
-
-	[ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}"
-
-	if [ $# -gt 5 ]; then
-		if [ "$6" = "-" ] ; then
-			board=${BOARD_NAME}
-		else
-			board="$6"
-		fi
-	fi
-
-	[ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
-	[ $# -gt 6 ] && [ "$8" != "-" ] && {
-		tmp="${8%:*}"
-		if [ "$tmp" ] ; then
-			CONFIG_NAME="$tmp"
-		fi
-	}
-
-	# Assign board directory to BOARDIR variable
-	if [ "${vendor}" == "-" ] ; then
-	    BOARDDIR=${board}
-	else
-	    BOARDDIR=${vendor}/${board}
-	fi
-
-	echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
-}
-
-get_target_maintainers() {
-	local name=`echo $1 | cut -d : -f 3`
-
-	local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
-	if [ -z "${line}" ]; then
-		echo ""
-		return ;
-	fi
-
-	local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
-	[ "$mails" == "-" ] && mails=""
-	echo "$mails"
-}
-
-get_target_arch() {
-	local target=$1
-
-	awk '$7 == "'$target'" { print $2 }' boards.cfg
-}
-
-list_target() {
-	if [ "$PRINT_MAINTS" != 'y' ] ; then
-		echo "$1"
-		return
-	fi
-
-	echo -n "$1:"
-
-	local loc=`get_target_location $1`
-
-	if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
-
-	local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
-
-	if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
-
-		local dir=`echo ${loc} | cut -d ":" -f 2`
-		local cfg=`echo ${loc} | cut -d ":" -f 1`
-		local git_result=`git log --format=%aE board/${dir} \
-				include/configs/${cfg}.h | grep "@"`
-		local git_result_recent=`echo ${git_result} | tr " " "\n" | \
-						head -n 3`
-		local git_result_top=`echo ${git_result} | tr " " "\n" | \
-			sort | uniq -c | sort -nr | head -n 3 | \
-			sed "s/^ \+[0-9]\+ \+//"`
-
-		echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
-			sort -u | tr "\n" " " | sed "s/ $//" ;
-	else
-		echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
-						sed "s/ $//" ;
-	fi
-
-	echo ""
-}
-
-# Each finished build will have a file called ${donep}${n},
-# where n is the index of the build. Each build
-# we've already noted as finished will have ${skipp}${n}.
-# The code managing the build process will use this information
-# to ensure that only BUILD_NBUILDS builds are in flight at once
-donep="${LOG_DIR}/._done_"
-skipp="${LOG_DIR}/._skip_"
-
-build_target_killed() {
-	echo "Aborted $target build."
-	# Remove the logs for this board since it was aborted
-	rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
-	exit
-}
-
-build_target() {
-	target=$1
-	build_idx=$2
-
-	if [ "$ONLY_LIST" == 'y' ] ; then
-		list_target ${target}
-		return
-	fi
-
-	if [ $BUILD_MANY == 1 ] ; then
-		output_dir="${OUTPUT_PREFIX}/${target}"
-		mkdir -p "${output_dir}"
-		trap build_target_killed TERM
-	else
-		output_dir="${OUTPUT_PREFIX}"
-	fi
-
-	target_arch=$(get_target_arch ${target})
-	eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
-	if [ "${cross_toolchain}" ] ; then
-	    MAKE="$GNU_MAKE CROSS_COMPILE=${cross_toolchain}"
-	elif [ "${CROSS_COMPILE}" ] ; then
-	    MAKE="$GNU_MAKE CROSS_COMPILE=${CROSS_COMPILE}"
-	else
-	    MAKE=$GNU_MAKE
-	fi
-
-	if [  "${output_dir}" != "." ] ; then
-		MAKE="${MAKE} O=${output_dir}"
-	fi
-
-	${MAKE} mrproper >/dev/null
-
-	echo "Building ${target} board..."
-	${MAKE} -s ${target}_defconfig >/dev/null
-
-	${MAKE} ${JOBS} ${CHECK} all \
-		>${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
-
-	# Check for 'make' errors
-	if [ ${PIPESTATUS[0]} -ne 0 ] ; then
-		RC=1
-	fi
-
-	OBJS=${output_dir}/u-boot
-	if [ -e ${output_dir}/spl/u-boot-spl ]; then
-		OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
-	fi
-
-	${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
-
-	if [ $BUILD_MANY == 1 ] ; then
-		trap - TERM
-
-		${MAKE} -s clean
-
-		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
-			cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
-		else
-			rm ${LOG_DIR}/${target}.ERR
-		fi
-	else
-		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
-			if grep -iw error ${LOG_DIR}/${target}.ERR ; then
-				: $(( ERR_CNT += 1 ))
-				ERR_LIST="${ERR_LIST} $target"
-			else
-				: $(( WRN_CNT += 1 ))
-				WRN_LIST="${WRN_LIST} $target"
-			fi
-		else
-			rm ${LOG_DIR}/${target}.ERR
-		fi
-	fi
-
-	[ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
-
-	touch "${donep}${build_idx}"
-}
-
-manage_builds() {
-	search_idx=${OLDEST_IDX}
-	if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
-
-	while true; do
-		if [ -e "${donep}${search_idx}" ] ; then
-			: $(( CURRENT_CNT-- ))
-			[ ${OLDEST_IDX} -eq ${search_idx} ] &&
-				: $(( OLDEST_IDX++ ))
-
-			# Only want to count it once
-			rm -f "${donep}${search_idx}"
-			touch "${skipp}${search_idx}"
-		elif [ -e "${skipp}${search_idx}" ] ; then
-			[ ${OLDEST_IDX} -eq ${search_idx} ] &&
-				: $(( OLDEST_IDX++ ))
-		fi
-		: $(( search_idx++ ))
-		if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
-			if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
-				search_idx=${OLDEST_IDX}
-				sleep 1
-			else
-				break
-			fi
-		fi
-	done
-}
-
-build_targets() {
-	for t in "$@" ; do
-		# If a LIST_xxx var exists, use it.  But avoid variable
-		# expansion in the eval when a board name contains certain
-		# characters that the shell interprets.
-		case ${t} in
-			*[-+=]*) list= ;;
-			*)       list=$(eval echo '${LIST_'$t'}') ;;
-		esac
-		if [ -n "${list}" ] ; then
-			build_targets ${list}
-		else
-			: $((TOTAL_CNT += 1))
-			: $((CURRENT_CNT += 1))
-			rm -f "${donep}${TOTAL_CNT}"
-			rm -f "${skipp}${TOTAL_CNT}"
-			if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
-				: $((SKIP_CNT += 1))
-				touch "${donep}${TOTAL_CNT}"
-			elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
-				: $((SKIP_CNT += 1))
-				touch "${donep}${TOTAL_CNT}"
-			else
-				if [ $BUILD_MANY == 1 ] ; then
-					build_target ${t} ${TOTAL_CNT} &
-				else
-					CUR_TGT="${t}"
-					build_target ${t} ${TOTAL_CNT}
-					CUR_TGT=''
-				fi
-			fi
-		fi
-
-		# We maintain a running count of all the builds we have done.
-		# Each finished build will have a file called ${donep}${n},
-		# where n is the index of the build. Each build
-		# we've already noted as finished will have ${skipp}${n}.
-		# We track the current index via TOTAL_CNT, and the oldest
-		# index. When we exceed the maximum number of parallel builds,
-		# We look from oldest to current for builds that have completed,
-		# and update the current count and oldest index as appropriate.
-		# If we've gone through the entire list, wait a second, and
-		# reprocess the entire list until we find a build that has
-		# completed
-		if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
-			manage_builds
-		fi
-	done
-}
-
-#-----------------------------------------------------------------------
-
-kill_children() {
-	local OS=$(uname -s)
-	local children=""
-	case "${OS}" in
-		"Darwin")
-			# Mac OS X is known to have BSD style ps
-			local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
-			children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
-			;;
-		*)
-			# everything else tries the GNU style
-			local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
-			children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
-			;;
-	esac
-
-	kill $children 2> /dev/null
-	wait $children 2> /dev/null
-
-	exit
-}
-
-print_stats() {
-	if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
-
-	# Only count boards that completed
-	: $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
-
-	rm -f ${donep}* ${skipp}*
-
-	if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
-		ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
-		ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
-		ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
-		WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
-		WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
-		WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
-	else
-		# Remove the logs for any board that was interrupted
-		rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
-	fi
-
-	: $((TOTAL_CNT -= ${SKIP_CNT}))
-	echo ""
-	echo "--------------------- SUMMARY ----------------------------"
-	if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
-		echo "Boards skipped: ${SKIP_CNT}"
-	fi
-	echo "Boards compiled: ${TOTAL_CNT}"
-	if [ ${ERR_CNT} -gt 0 ] ; then
-		echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
-	fi
-	if [ ${WRN_CNT} -gt 0 ] ; then
-		echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
-	fi
-	echo "----------------------------------------------------------"
-
-	if [ $BUILD_MANY == 1 ] ; then
-		kill_children
-	fi
-
-	deprecation
-
-	exit $RC
-}
-
-#-----------------------------------------------------------------------
-
-# Build target groups selected by options, plus any command line args
-set -- ${SELECTED} "$@"
-# run PowerPC by default
-[ $# = 0 ] && set -- powerpc
-build_targets "$@"
-wait