From: Simon Glass Date: Mon, 6 Jul 2015 22:47:50 +0000 (-0600) Subject: dm: usb: eth: Support driver model with USB Ethernet X-Git-Tag: v2015.10-rc1~88 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=c8c2797c381054beaf3de89027af92a0b84b36cc;p=u-boot dm: usb: eth: Support driver model with USB Ethernet At present USB Ethernet does not work with CONFIG_DM_ETH. Add driver model support to this feature, so that it can work alongside other Ethernet devices with driver model. It was found that quite a bit of code is common in most of the USB Ethernet drivers. Add this code to the common layer to reduce the amount of duplicate code needed in USB Ethernet drivers when CONFIG_DM_ETH is used. Signed-off-by: Simon Glass Reviewed-by: Marek Vasut --- diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 6198d063d1..0ade7759f0 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -22,7 +22,7 @@ #ifdef CONFIG_USB_STORAGE static int usb_stor_curr_dev = -1; /* current device */ #endif -#ifdef CONFIG_USB_HOST_ETHER +#if defined(CONFIG_USB_HOST_ETHER) && !defined(CONFIG_DM_ETH) static int __maybe_unused usb_ether_curr_dev = -1; /* current ethernet device */ #endif diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index c72b7e47c4..07d2309883 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -6,11 +6,137 @@ #include #include +#include #include #include #include "usb_ether.h" +#ifdef CONFIG_DM_ETH + +#define USB_BULK_RECV_TIMEOUT 500 + +int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize) +{ + struct usb_device *udev = dev_get_parentdata(dev); + struct usb_interface_descriptor *iface_desc; + bool ep_in_found = false, ep_out_found = false; + struct usb_interface *iface; + const int ifnum = 0; /* Always use interface 0 */ + int ret, i; + + iface = &udev->config.if_desc[ifnum]; + iface_desc = &udev->config.if_desc[ifnum].desc; + + /* Initialize the ueth_data structure with some useful info */ + ueth->ifnum = ifnum; + ueth->subclass = iface_desc->bInterfaceSubClass; + ueth->protocol = iface_desc->bInterfaceProtocol; + + /* + * We are expecting a minimum of 3 endpoints - in, out (bulk), and int. + * We will ignore any others. + */ + for (i = 0; i < iface_desc->bNumEndpoints; i++) { + int ep_addr = iface->ep_desc[i].bEndpointAddress; + + /* is it an BULK endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { + if (ep_addr & USB_DIR_IN && !ep_in_found) { + ueth->ep_in = ep_addr & + USB_ENDPOINT_NUMBER_MASK; + ep_in_found = true; + } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) { + ueth->ep_out = ep_addr & + USB_ENDPOINT_NUMBER_MASK; + ep_out_found = true; + } + } + + /* is it an interrupt endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { + ueth->ep_int = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + ueth->irqinterval = iface->ep_desc[i].bInterval; + } + } + debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out, + ueth->ep_int); + + /* Do some basic sanity checks, and bail if we find a problem */ + if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) { + debug("%s: %s: Cannot find endpoints\n", __func__, dev->name); + return -ENXIO; + } + + ueth->rxsize = rxsize; + ueth->rxbuf = memalign(rxsize, ARCH_DMA_MINALIGN); + if (!ueth->rxbuf) + return -ENOMEM; + + ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum); + if (ret) { + debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name, + ret); + return ret; + } + ueth->pusb_dev = udev; + + return 0; +} + +int usb_ether_deregister(struct ueth_data *ueth) +{ + return 0; +} + +int usb_ether_receive(struct ueth_data *ueth, int rxsize) +{ + int actual_len; + int ret; + + if (rxsize > ueth->rxsize) + return -EINVAL; + ret = usb_bulk_msg(ueth->pusb_dev, + usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in), + ueth->rxbuf, rxsize, &actual_len, + USB_BULK_RECV_TIMEOUT); + debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret); + if (ret) { + printf("Rx: failed to receive: %d\n", ret); + return ret; + } + if (actual_len > rxsize) { + debug("Rx: received too many bytes %d\n", actual_len); + return -ENOSPC; + } + ueth->rxlen = actual_len; + ueth->rxptr = 0; + + return actual_len ? 0 : -EAGAIN; +} + +void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes) +{ + ueth->rxptr += num_bytes; + if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen) + ueth->rxlen = 0; +} + +int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp) +{ + if (!ueth->rxlen) + return 0; + + *ptrp = &ueth->rxbuf[ueth->rxptr]; + + return ueth->rxlen - ueth->rxptr; +} + +#else + typedef void (*usb_eth_before_probe)(void); typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss); @@ -197,3 +323,4 @@ int usb_host_eth_scan(int mode) return 0; return -1; } +#endif diff --git a/include/usb_ether.h b/include/usb_ether.h index 23507e19e6..c6d1416048 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -19,25 +19,91 @@ #define ETH_DATA_LEN 1500 /* Max. octets in payload */ #define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */ +/* TODO(sjg@chromium.org): Remove @pusb_dev when all boards use CONFIG_DM_ETH */ struct ueth_data { /* eth info */ - struct eth_device eth_dev; /* used with eth_register */ - int phy_id; /* mii phy id */ +#ifdef CONFIG_DM_ETH + uint8_t *rxbuf; + int rxsize; + int rxlen; /* Total bytes available in rxbuf */ + int rxptr; /* Current position in rxbuf */ +#else + struct eth_device eth_dev; /* used with eth_register */ + /* driver private */ + void *dev_priv; +#endif + int phy_id; /* mii phy id */ /* usb info */ struct usb_device *pusb_dev; /* this usb_device */ - unsigned char ifnum; /* interface number */ - unsigned char ep_in; /* in endpoint */ - unsigned char ep_out; /* out ....... */ - unsigned char ep_int; /* interrupt . */ - unsigned char subclass; /* as in overview */ - unsigned char protocol; /* .............. */ + unsigned char ifnum; /* interface number */ + unsigned char ep_in; /* in endpoint */ + unsigned char ep_out; /* out ....... */ + unsigned char ep_int; /* interrupt . */ + unsigned char subclass; /* as in overview */ + unsigned char protocol; /* .............. */ unsigned char irqinterval; /* Intervall for IRQ Pipe */ - - /* driver private */ - void *dev_priv; }; +#ifdef CONFIG_DM_ETH +/** + * usb_ether_register() - register a new USB ethernet device + * + * This selects the correct USB interface and figures out the endpoints to use. + * + * @dev: USB device + * @ss: Place to put USB ethernet data + * @rxsize: Maximum size to allocate for the receive buffer + * @return 0 if OK, -ve on error + */ +int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize); + +/** + * usb_ether_deregister() - deregister a USB ethernet device + * + * @ueth: USB Ethernet device + * @return 0 + */ +int usb_ether_deregister(struct ueth_data *ueth); + +/** + * usb_ether_receive() - recieve a packet from the bulk in endpoint + * + * The packet is stored in the internal buffer ready for processing. + * + * @ueth: USB Ethernet device + * @rxsize: Maximum size to receive + * @return 0 if a packet was received, -EAGAIN if not, -ENOSPC if @rxsize is + * larger than the size passed ot usb_ether_register(), other -ve on error + */ +int usb_ether_receive(struct ueth_data *ueth, int rxsize); + +/** + * usb_ether_get_rx_bytes() - obtain bytes from the internal packet buffer + * + * This should be called repeatedly to obtain packet data until it returns 0. + * After each packet is processed, call usb_ether_advance_rxbuf() to move to + * the next one. + * + * @ueth: USB Ethernet device + * @ptrp: Returns a pointer to the start of the next packet if there is + * one available + * @return number of bytes available, or 0 if none + */ +int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp); + +/** + * usb_ether_advance_rxbuf() - Advance to the next packet in the internal buffer + * + * After processing the data returned by usb_ether_get_rx_bytes(), call this + * function to move to the next packet. You must specify the number of bytes + * you have processed in @num_bytes. + * + * @ueth: USB Ethernet device + * @num_bytes: Number of bytes to skip, or -1 to skip all bytes + */ +void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes); +#else /* * Function definitions for each USB ethernet driver go here * (declaration is unconditional, compilation is conditional) @@ -65,5 +131,6 @@ int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss); int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, struct eth_device *eth); +#endif #endif /* __USB_ETHER_H__ */