From: Marc Schink Date: Sun, 17 Apr 2016 12:53:25 +0000 (+0200) Subject: board/efm32: Disable SRST X-Git-Tag: v0.10.0-rc1~167 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ca916d6118b2388a40807eb4bbbfd1c0bd4bdc04;p=openocd board/efm32: Disable SRST The current configuration leads to the following error when trying to program the target: SWD IDCODE 0x2ba01477 timed out while waiting for target halted TARGET: efm32.cpu - Not halted in procedure 'program' in procedure 'reset' called at file "embedded:startup.tcl", line 478 in procedure 'ocd_bouncer' Use the default reset handling of the target (SYSRESETREQ) to reset the system rather than SRST to fix the problem. Tested on EFM32GG, EFM32TG and EZR32WG STK. Change-Id: I788c41baf08b20814cbe0934b563424c4bc144b8 Signed-off-by: Marc Schink Reviewed-on: http://openocd.zylin.com/3420 Tested-by: jenkins Reviewed-by: Andreas Färber Reviewed-by: Freddie Chopin --- diff --git a/tcl/board/efm32.cfg b/tcl/board/efm32.cfg index 820b6c81..d2bc9a61 100644 --- a/tcl/board/efm32.cfg +++ b/tcl/board/efm32.cfg @@ -1,6 +1,6 @@ -# Configuration for EFM32 boards with Segger J-Link on board +# Configuration for EFM32 boards with on-board SEGGER J-Link # -# Tested with TINY GECKO and Zero Gecko demo board +# Tested with Tiny, Giant and Zero Gecko Starter Kit. # source [find interface/jlink.cfg] @@ -9,9 +9,3 @@ adapter_khz 1000 set CHIPNAME efm32 source [find target/efm32.cfg] - -# EFM32 SWD doesn't work with RST asserted -# So don't use srst_nogate! -# Attach to running target with "mon halt" -reset_config srst_only -