From: Wolfgang Denk <wd@pollux.denx.de>
Date: Wed, 5 Jul 2006 08:42:14 +0000 (+0200)
Subject: Bring yucca config more in line with other AMCC boards.
X-Git-Tag: U-Boot-1_1_5~112
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=caaeaf925fe15f46c1d5c85c37330029c86e0f39;p=u-boot

Bring yucca config more in line with other AMCC boards.
---

diff --git a/CHANGELOG b/CHANGELOG
index 88d8770f72..3ec7c2e788 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Bring yucca config more in line with other AMCC boards.
+
 * Add AMCC bamboo board to MAKEALL build script.
 
 * Fix AMCC bamboo eval board compilation errors.
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index e6d9843567..ee5a44838a 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -152,29 +152,13 @@
 #undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
 #define CONFIG_ENV_OVERWRITE	1
 
-#define CONFIG_BOOTARGS		"console=ttyS0,115200n8 root=/dev/nfs rw"
-#define CONFIG_BOOTCOMMAND	"bootm E7C00000" /* autoboot command	*/
-#define CONFIG_BOOTDELAY	-1	/* -1 to disable autoboot	*/
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
 
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_MII		1	/* MII PHY management		*/
-#undef CONFIG_NET_MULTI
-#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
-#define CONFIG_HAS_ETH0
-#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
-#define CONFIG_PHY_RESET_DELAY	1000
-#define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#define CONFIG_NETMASK		255.255.0.0
-#define CONFIG_IPADDR		192.168.80.10
-#define CONFIG_ETHADDR		00:04:AC:01:CA:FE
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP		192.168.1.1
+#undef	CONFIG_BOOTARGS
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
- 	"loads_echo=1\0"						\
 	"netdev=eth0\0"							\
 	"hostname=yucca\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
@@ -190,7 +174,7 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 		"bootm\0"						\
-	"rootpath=/opt/eldk-4.0/ppc_4xx\0"				\
+	"rootpath=/opt/eldk/ppc_4xx\0"				\
 	"bootfile=yucca/uImage\0"					\
 	"kernel_addr=E7F10000\0"					\
 	"ramdisk_addr=E7F20000\0"					\
@@ -200,22 +184,42 @@
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL		| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_I2C	| \
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_DHCP	| \
-				CFG_CMD_PING	| \
 				CFG_CMD_DIAG	| \
-				CFG_CMD_NET	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	)
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+#define CONFIG_MII		1	/* MII PHY management		*/
+#undef CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
+#define CONFIG_PHY_RESET_DELAY	1000
+#define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*