From: John Rigby Date: Tue, 26 Jan 2010 06:12:55 +0000 (-0700) Subject: fec_mxc: cleanup and factor out MX27 dependencies X-Git-Tag: v2010.03-rc1~24 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=cb17b92de03416cf4d5db5bd27ef4ae17f95e707;p=u-boot fec_mxc: cleanup and factor out MX27 dependencies general cleanup move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c make MX27 specific phy init conditional on CONFIG_MX27 replace call to imx_get_ahbclk with one to imx_get_fecclk and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h Signed-off-by: John Rigby CC: Ben Warren CC: Fred Fan CC: Tom --- diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c index da05c55fb5..30cf544712 100644 --- a/cpu/arm926ejs/mx27/generic.c +++ b/cpu/arm926ejs/mx27/generic.c @@ -166,6 +166,11 @@ int print_cpuinfo (void) int cpu_eth_init(bd_t *bis) { #if defined(CONFIG_FEC_MXC) + struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; + + /* enable FEC clock */ + writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1); + writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0); return fecmxc_initialize(bis); #else return 0; diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 446076fea1..e027894cff 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -162,7 +162,9 @@ static int miiphy_restart_aneg(struct eth_device *dev) * Wake up from sleep if necessary * Reset PHY, then delay 300ns */ +#ifdef CONFIG_MX27 miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_MIPGSR, 0x00FF); +#endif miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR, PHY_BMCR_RESET); udelay(1000); @@ -363,7 +365,8 @@ static int fec_open(struct eth_device *edev) /* * Enable FEC-Lite controller */ - writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); + writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, + &fec->eth->ecntrl); miiphy_wait_aneg(edev); miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR); @@ -490,7 +493,7 @@ static void fec_halt(struct eth_device *dev) /* * issue graceful stop command to the FEC transmitter if necessary */ - writel(FEC_ECNTRL_RESET | readl(&fec->eth->x_cntrl), + writel(FEC_TCNTRL_GTS | readl(&fec->eth->x_cntrl), &fec->eth->x_cntrl); debug("eth_halt: wait for stop regs\n"); @@ -498,7 +501,7 @@ static void fec_halt(struct eth_device *dev) * wait for graceful stop to register */ while ((counter--) && (!(readl(&fec->eth->ievent) & FEC_IEVENT_GRA))) - ; /* FIXME ensure time */ + udelay(1); /* * Disable SmartDMA tasks @@ -510,7 +513,7 @@ static void fec_halt(struct eth_device *dev) * Disable the Ethernet Controller * Note: this will also reset the BD index counter! */ - writel(0, &fec->eth->ecntrl); + writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); fec->rbd_index = 0; fec->tbd_index = 0; debug("eth_halt: done\n"); @@ -569,7 +572,7 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length) * wait until frame is sent . */ while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) { - /* FIXME: Timeout */ + udelay(1); } debug("fec_send: status 0x%x index %d\n", readw(&fec->tbd_base[fec->tbd_index].status), @@ -688,7 +691,7 @@ static int fec_probe(bd_t *bd) fec->xcv_type = MII100; /* Reset chip. */ - writel(FEC_ECNTRL_RESET, &fec->eth->ecntrl); + writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RESET, &fec->eth->ecntrl); while (readl(&fec->eth->ecntrl) & 1) udelay(10); diff --git a/include/asm-arm/arch-mx27/clock.h b/include/asm-arm/arch-mx27/clock.h index 472e8f2427..7e9c7aabb0 100644 --- a/include/asm-arm/arch-mx27/clock.h +++ b/include/asm-arm/arch-mx27/clock.h @@ -37,5 +37,6 @@ ulong imx_get_perclk3(void); ulong imx_get_ahbclk(void); #define imx_get_uartclk imx_get_perclk1 +#define imx_get_fecclk imx_get_ahbclk #endif /* __ASM_ARCH_CLOCK_H */