From: Bagavathiannan Palanisamy Date: Tue, 17 Nov 2015 09:53:34 +0000 (+0100) Subject: board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader X-Git-Tag: v2016.01-rc2~253 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=cd7255fdc2f032a67369869a7aa26d3f9ad38b21;p=u-boot board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader Setting dip_switch 3 and 4 also will run bootloader in COGE3 and COGE6 It is required remove local mgmt IP address, when DIP Switch PIN3 is enabled. DIP Switch 4 also enabled to avoid u-boot update in future for DIP switch enhancements. Signed-off-by: Bagavathiannan Palanisamy Signed-off-by: Valentin Longchamp --- diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index 01a3c2009e..9e285ec62b 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -329,8 +329,8 @@ int last_stage_init(void) dip_switch = in_8(&base->mswitch); dip_switch &= BFTICU_DIPSWITCH_MASK; - /* dip switch 'full reset' or 'db erase' */ - if (dip_switch & 0x1 || dip_switch & 0x2) { + /* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */ + if (dip_switch != 0) { /* start bootloader */ puts("DIP: Enabled\n"); setenv("actual_bank", "0");