From: Michael Stapelberg Date: Fri, 4 May 2012 13:54:22 +0000 (+0200) Subject: update i3status manpage X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ceb0340263556695f107eecd1120ded8ee1b746e;p=i3%2Fi3.github.io update i3status manpage --- diff --git a/_docs/i3status.man b/_docs/i3status.man index 89bf9d5..0ba010e 100644 --- a/_docs/i3status.man +++ b/_docs/i3status.man @@ -1,7 +1,7 @@ i3status(1) =========== Michael Stapelberg -v2.3, July 2011 +v2.5, May 2012 == NAME @@ -34,10 +34,6 @@ commands would. == CONFIGURATION -Since version 2, the configuration file for i3status will be parsed using -libconfuse. This makes configuration easier in the programmer’s point of -view and more flexible for the user at the same time. - The basic idea of i3status is that you can specify which "modules" should be used (the order directive). You can then configure each module with its own section. For every module, you can specify the output format. See below @@ -51,7 +47,7 @@ general { interval = 5 } -order = "ipv6" +order += "ipv6" order += "disk /" order += "run_watch DHCP" order += "run_watch VPN" @@ -74,7 +70,8 @@ ethernet eth0 { } battery 0 { - format = "%status %percentage %remaining" + format = "%status %percentage %remaining %emptytime" + path = "/sys/class/power_supply/BAT%d/uevent" } run_watch DHCP { @@ -128,6 +125,12 @@ sleep before printing the next status line. Using +output_format+ you can chose which format strings i3status should use in its output. Currently available are: +i3bar:: +i3bar comes with i3 and provides a workspace bar which does the right thing in +multi-monitor situations. It also comes with tray support and can display the +i3status output. This output type uses JSON to pass as much meta-information to +i3bar as possible (like colors, which blocks can be shortened in which way, +etc.). dzen2:: Dzen is a general purpose messaging, notification and menuing program for X11. It was designed to be scriptable in any language and integrate well with window @@ -164,6 +167,8 @@ a specific application, such as a VPN client or your DHCP client is running. *Example order*: +run_watch DHCP+ +*Example format*: +%title: %status+ + === Wireless Gets the link quality and ESSID of the given wireless network interface. You @@ -187,15 +192,20 @@ it using +setcap cap_net_admin=ep $(which i3status)+. === Battery Gets the status (charging, discharging, running), percentage and remaining -time of the given battery. If you want to use the last full capacity instead -of the design capacity (when using the design capacity, it may happen that -your battery is at 23% when fully charged because it’s old. In general, I -want to see it this way, because it tells me how worn off my battery is.), -just specify +last_full_capacity = true+. +time of the given battery and when it's estimated to be empty. If you want +to use the last full capacity instead of the design capacity (when using +the design capacity, it may happen that your battery is at 23% when fully +charged because it’s old. In general, I want to see it this way, because +it tells me how worn off my battery is.), just specify ++last_full_capacity = true+. + +If your battery is represented in a non-standard path in /sys, be sure to +modify the "path" property accordingly. The first occurence of %d gets replaced +with the battery number, but you can just hard-code a path as well. *Example order*: +battery 0+ -*Example format*: +%status %remaining+ +*Example format*: +%status %remaining (%emptytime)+ === CPU-Temperature @@ -281,6 +291,41 @@ is set to +xmobar+. i3status | xmobar -o -t "%StdinReader%" -c "[Run StdinReader]" --------------------------------------------------------------------- +== What about memory usage or CPU frequency? + +While talking about two specific things, please understand this section as a +general explanation why your favorite information is not included in i3status. + +Let’s talk about memory usage specifically. It is hard to measure memory in a +way which is accurate or meaningful. An in-depth understanding of how paging +and virtual memory work in your operating system is required. Furthermore, even +if we had a well-defined way of displaying memory usage and you would +understand it, I think that it’s not helpful to repeatedly monitor your memory +usage. One reason for that is that I have not run out of memory in the last few +years. Memory has become so cheap that even in my 4 year old notebook, I have +8 GiB of RAM. Another reason is that your operating system will do the right +thing anyway: Either you have not enough RAM for your workload, but you need to +do it anyway, then your operating system will swap. Or you don’t have enough +RAM and you want to restrict your workload so that it fits, then the operating +system will kill the process using too much RAM and you can act accordingly. + +For CPU frequency, the situation is similar. Many people don’t understand how +frequency scaling works precisely. The generally recommended CPU frequency +governor ("ondemand") changes the CPU frequency far more often than i3status +could display it. The display number is therefore often incorrect and doesn’t +tell you anything useful either. + +In general, i3status wants to display things which you would look at +occasionally anyways, like the current date/time, whether you are connected to +a WiFi network or not, and if you have enough disk space to fit that 4.3 GiB +download. + +However, if you need to look at some kind of information more than once in a +while (like checking repeatedly how full your RAM is), you are probably better +off with a script doing that, which pops up an alert when your RAM usage reaches +a certain threshold. After all, the point of computers is not to burden you +with additional boring tasks like repeatedly checking a number. + == External scripts/programs with i3status In i3status, we don’t want to implement process management again. Therefore, @@ -295,7 +340,7 @@ use your shell, for example like this: i3status | while : do read line - echo "mystuff | $line" + echo "mystuff | $line" || exit 1 done -------------------------------------------------------------- diff --git a/i3status/manpage.html b/i3status/manpage.html index 3083599..b7b468c 100644 --- a/i3status/manpage.html +++ b/i3status/manpage.html @@ -2,592 +2,56 @@ "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> + - -i3status(1) - + +i3: i3status(1) + + + + +
+

i3 - improved tiling WM

 + +
+
-
-

NAME

+

1. NAME

i3status - Generates a status line for dzen2 or xmobar

-

SYNOPSIS

+

2. SYNOPSIS

i3status [-c configfile] [-h] [-v]

-

OPTIONS

+

3. OPTIONS

@@ -625,7 +89,7 @@ configuration files in the following order:
-

DESCRIPTION

+

4. DESCRIPTION

i3status is a small program (about 1500 SLOC) for generating a status bar for i3bar, dzen2, xmobar or similar programs. It is designed to be very @@ -637,11 +101,8 @@ commands would.

-

CONFIGURATION

+

5. CONFIGURATION

-

Since version 2, the configuration file for i3status will be parsed using -libconfuse. This makes configuration easier in the programmer’s point of -view and more flexible for the user at the same time.

The basic idea of i3status is that you can specify which "modules" should be used (the order directive). You can then configure each module with its own section. For every module, you can specify the output format. See below @@ -678,7 +139,7 @@ ethernet eth0 { } battery 0 { - format = "%status %percentage %remaining" + format = "%status %percentage %remaining %emptytime" path = "/sys/class/power_supply/BAT%d/uevent" } @@ -708,7 +169,7 @@ disk "/" { }

-

General

+

5.1. General

The colors directive will disable all colors if you set it to false. You can also specify the colors that will be used to display "good", "degraded" or "bad" values using the color_good, color_degraded or color_bad directives, @@ -730,6 +191,18 @@ sleep before printing the next status line.

use in its output. Currently available are:

+i3bar +
+
+

+i3bar comes with i3 and provides a workspace bar which does the right thing in +multi-monitor situations. It also comes with tray support and can display the +i3status output. This output type uses JSON to pass as much meta-information to +i3bar as possible (like colors, which blocks can be shortened in which way, +etc.). +

+
+
dzen2
@@ -760,27 +233,28 @@ be used with i3bar and can be used for custom scripts.
-

IPv6

+

5.2. IPv6

This module gets the IPv6 address used for outgoing connections (that is, the best available public IPv6 address on your computer).

Example format_up: %ip

Example format_down no IPv6

-

Disk

+

5.3. Disk

Gets used, free, available and total amount of bytes on the given mounted filesystem.

Example order: disk /mnt/usbstick

Example format: %free (%avail)/ %total

-

Run-watch

+

5.4. Run-watch

Expands the given path to a pidfile and checks if the process ID found inside is valid (that is, if the process is running). You can use this to check if a specific application, such as a VPN client or your DHCP client is running.

Example order: run_watch DHCP

+

Example format: %title: %status

-

Wireless

+

5.5. Wireless

Gets the link quality and ESSID of the given wireless network interface. You can specify different format strings for the network being connected or not connected.

@@ -788,7 +262,7 @@ connected.

Example format: W: (%quality at %essid, %bitrate) %ip

-

Ethernet

+

5.6. Ethernet

Gets the IP address and (if possible) the link speed of the given ethernet interface. Getting the link speed requires the cap_net_admin capability. Set it using setcap cap_net_admin=ep $(which i3status).

@@ -796,46 +270,47 @@ it using setcap cap_net_admin=ep $(which i3status).

Example format: E: %ip (%speed)

-

Battery

+

5.7. Battery

Gets the status (charging, discharging, running), percentage and remaining -time of the given battery. If you want to use the last full capacity instead -of the design capacity (when using the design capacity, it may happen that -your battery is at 23% when fully charged because it’s old. In general, I -want to see it this way, because it tells me how worn off my battery is.), -just specify last_full_capacity = true.

+time of the given battery and when it’s estimated to be empty. If you want +to use the last full capacity instead of the design capacity (when using +the design capacity, it may happen that your battery is at 23% when fully +charged because it’s old. In general, I want to see it this way, because +it tells me how worn off my battery is.), just specify +last_full_capacity = true.

If your battery is represented in a non-standard path in /sys, be sure to modify the "path" property accordingly. The first occurence of %d gets replaced with the battery number, but you can just hard-code a path as well.

Example order: battery 0

-

Example format: %status %remaining

+

Example format: %status %remaining (%emptytime)

-

CPU-Temperature

+

5.8. CPU-Temperature

Gets the temperature of the given thermal zone.

Example order: cpu_temperature 0

Example format: T: %degrees °C

-

CPU Usage

+

5.9. CPU Usage

Gets the percentual CPU usage from /proc/stat.

Example order: cpu_usage

Example format: %usage

-

Load

+

5.10. Load

Gets the system load (number of processes waiting for CPU time in the last 1, 5 and 15 minutes).

Example order: load

Example format: %1min %5min %15min

-

Time

+

5.11. Time

Formats the current system time. See strftime(3) for the format.

Example order: time

Example format: %Y-%m-%d %H:%M:%S

-

DDate

+

5.12. DDate

Outputs the current discordian date in user-specified format. See ddate(1) for details on the format string. Note: Neither %. nor %X are implemented yet.

@@ -843,7 +318,7 @@ details on the format string.

Example format: %{%a, %b %d%}, %Y%N - %H

-

Volume

+

5.13. Volume

Outputs the volume of the specified mixer on the specified device. Works only on Linux because it uses ALSA.

Example order: volume master

@@ -862,7 +337,7 @@ on Linux because it uses ALSA.

-

Using i3status with dzen2

+

6. Using i3status with dzen2

After installing dzen2, you can directly use it with i3status. Just ensure that output_format is set to dzen2.

@@ -875,7 +350,7 @@ on Linux because it uses ALSA.

-

Using i3status with xmobar

+

7. Using i3status with xmobar

To get xmobar to start, you might need to copy the default configuration file to ~/.xmobarrc. Also, ensure that the output_format option for i3status @@ -888,7 +363,40 @@ is set to xmobar.

-

External scripts/programs with i3status

+

8. What about memory usage or CPU frequency?

+
+

While talking about two specific things, please understand this section as a +general explanation why your favorite information is not included in i3status.

+

Let’s talk about memory usage specifically. It is hard to measure memory in a +way which is accurate or meaningful. An in-depth understanding of how paging +and virtual memory work in your operating system is required. Furthermore, even +if we had a well-defined way of displaying memory usage and you would +understand it, I think that it’s not helpful to repeatedly monitor your memory +usage. One reason for that is that I have not run out of memory in the last few +years. Memory has become so cheap that even in my 4 year old notebook, I have +8 GiB of RAM. Another reason is that your operating system will do the right +thing anyway: Either you have not enough RAM for your workload, but you need to +do it anyway, then your operating system will swap. Or you don’t have enough +RAM and you want to restrict your workload so that it fits, then the operating +system will kill the process using too much RAM and you can act accordingly.

+

For CPU frequency, the situation is similar. Many people don’t understand how +frequency scaling works precisely. The generally recommended CPU frequency +governor ("ondemand") changes the CPU frequency far more often than i3status +could display it. The display number is therefore often incorrect and doesn’t +tell you anything useful either.

+

In general, i3status wants to display things which you would look at +occasionally anyways, like the current date/time, whether you are connected to +a WiFi network or not, and if you have enough disk space to fit that 4.3 GiB +download.

+

However, if you need to look at some kind of information more than once in a +while (like checking repeatedly how full your RAM is), you are probably better +off with a script doing that, which pops up an alert when your RAM usage reaches +a certain threshold. After all, the point of computers is not to burden you +with additional boring tasks like repeatedly checking a number.

+
+
+
+

9. External scripts/programs with i3status

In i3status, we don’t want to implement process management again. Therefore, there is no module to run arbitrary scripts or commands. Instead, you should @@ -902,20 +410,20 @@ use your shell, for example like this:

i3status | while : do read line - echo "mystuff | $line" + echo "mystuff | $line" || exit 1 done

Put that in some script, say .bin/my_i3status.sh and execute that instead of i3status.

-

SEE ALSO

+

10. SEE ALSO

strftime(3), date(1), glob(3), dzen2(1), xmobar(1)

-

AUTHORS

+

11. AUTHORS

Michael Stapelberg and contributors

Thorsten Toepper

@@ -926,11 +434,8 @@ done
-