From: Lars Poeschel <poeschel@lemonage.de>
Date: Wed, 3 Apr 2013 04:37:52 +0000 (+0000)
Subject: pcm051: Enable DDR PHY dynamic power down bit
X-Git-Tag: v2013.04-rc3~1^2~72
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=cecac32a06a71bc27fbcc8b5491400836952302d;p=u-boot

pcm051: Enable DDR PHY dynamic power down bit

This is done already for am335x in
59dcf970d11ebff5d9f4bbbde79fda584e9e7ad4 and also applies for pcm051.

It powers down the IO receiver when not performing read which helps
reducing the overall power consuption in low power states
(suspend/standby).

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---

diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 1708ac2acd..43d7b6e15a 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -104,7 +104,8 @@ static struct emif_regs ddr3_emif_reg_data = {
 	.sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2,
 	.sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3,
 	.zq_config = MT41J256M8HX15E_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 #endif