From: kc8apf Date: Thu, 21 May 2009 04:37:31 +0000 (+0000) Subject: Author: Michael Bruck X-Git-Tag: v0.2.0~651 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=d14b6ca01593e52a296db7f9f8134aa2a9f5d14b;p=openocd Author: Michael Bruck - add doxygen comments to scan commands in jtag.c - move jtag_add_dr_scan next to interface_jtag_add_dr_scan to keep these function pairs together git-svn-id: svn://svn.berlios.de/openocd/trunk@1859 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- diff --git a/src/jtag/jtag.c b/src/jtag/jtag.c index a0f2d66b..9ae4cff6 100644 --- a/src/jtag/jtag.c +++ b/src/jtag/jtag.c @@ -566,6 +566,15 @@ void jtag_add_ir_scan_noverify(int in_num_fields, scan_field_t *in_fields, tap_s } +/** + * Generate an IR SCAN with a list of scan fields with one entry for each enabled TAP. + * + * If the input field list contains an instruction value for a TAP then that is used + * otherwise the TAP is set to bypass. + * + * TAPs for which no fields are passed are marked as bypassed for subsequent DR SCANs. + * + */ void jtag_add_ir_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state) { if (jtag_verify&&jtag_verify_capture_ir) @@ -590,10 +599,7 @@ void jtag_add_ir_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t st } /** - * Generate a list of scan fields with one entry for each TAP. - * - * If the input field list contains an instruction value for a TAP then that is used - * otherwise the TAP is set to bypass. + * see jtag_add_ir_scan() * */ int MINIDRIVER(interface_jtag_add_ir_scan)(int in_num_fields, scan_field_t *in_fields, tap_state_t state) @@ -665,6 +671,12 @@ int MINIDRIVER(interface_jtag_add_ir_scan)(int in_num_fields, scan_field_t *in_f return ERROR_OK; } +/** + * Duplicate the scan fields passed into the function into an IR SCAN command + * + * This function assumes that the caller handles extra fields for bypassed TAPs + * + */ void jtag_add_plain_ir_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state) { int retval; @@ -676,6 +688,11 @@ void jtag_add_plain_ir_scan(int in_num_fields, scan_field_t *in_fields, tap_stat jtag_error=retval; } + +/** + * see jtag_add_plain_ir_scan() + * + */ int MINIDRIVER(interface_jtag_add_plain_ir_scan)(int in_num_fields, scan_field_t *in_fields, tap_state_t state) { @@ -705,16 +722,6 @@ int MINIDRIVER(interface_jtag_add_plain_ir_scan)(int in_num_fields, scan_field_t return ERROR_OK; } -void jtag_add_dr_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state) -{ - int retval; - - jtag_prelude(state); - - retval=interface_jtag_add_dr_scan(in_num_fields, in_fields, cmd_queue_end_state); - if (retval!=ERROR_OK) - jtag_error=retval; -} int jtag_check_value_inner(u8 *captured, u8 *in_check_value, u8 *in_check_mask, int num_bits); @@ -785,6 +792,32 @@ void jtag_add_dr_scan_check(int in_num_fields, scan_field_t *in_fields, tap_stat } } + +/** + * Generate a DR SCAN using the fields passed to the function + * + * For not bypassed TAPs the function checks in_fields and uses fields specified there. + * For bypassed TAPs the function generates a dummy 1bit field. + * + * The bypass status of TAPs is set by jtag_add_ir_scan(). + * + */ +void jtag_add_dr_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state) +{ + int retval; + + jtag_prelude(state); + + retval=interface_jtag_add_dr_scan(in_num_fields, in_fields, cmd_queue_end_state); + if (retval!=ERROR_OK) + jtag_error=retval; +} + + +/** + * see jtag_add_dr_scan() + * + */ int MINIDRIVER(interface_jtag_add_dr_scan)(int in_num_fields, scan_field_t *in_fields, tap_state_t state) { int j; @@ -877,6 +910,22 @@ int MINIDRIVER(interface_jtag_add_dr_scan)(int in_num_fields, scan_field_t *in_f return ERROR_OK; } + + +/** + * Generate a DR SCAN using the array of output values passed to the function + * + * This function assumes that the parameter target_tap specifies the one TAP + * that is not bypassed. All other TAPs must be bypassed and the function will + * generate a dummy 1bit field for them. + * + * For the target_tap a sequence of output-only fields will be generated where + * each field has the size num_bits and the field's values are taken from + * the array value. + * + * The bypass status of TAPs is set by jtag_add_ir_scan(). + * + */ void MINIDRIVER(interface_jtag_add_dr_out)(jtag_tap_t *target_tap, int in_num_fields, const int *num_bits, @@ -964,6 +1013,13 @@ void MINIDRIVER(interface_jtag_add_dr_out)(jtag_tap_t *target_tap, } } + +/** + * Duplicate the scan fields passed into the function into a DR SCAN command + * + * This function assumes that the caller handles extra fields for bypassed TAPs + * + */ void jtag_add_plain_dr_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state) { int retval; @@ -975,6 +1031,11 @@ void jtag_add_plain_dr_scan(int in_num_fields, scan_field_t *in_fields, tap_stat jtag_error=retval; } + +/** + * see jtag_add_plain_dr_scan() + * + */ int MINIDRIVER(interface_jtag_add_plain_dr_scan)(int in_num_fields, scan_field_t *in_fields, tap_state_t state) { jtag_command_t * cmd = cmd_queue_alloc(sizeof(jtag_command_t)); @@ -1003,6 +1064,7 @@ int MINIDRIVER(interface_jtag_add_plain_dr_scan)(int in_num_fields, scan_field_t return ERROR_OK; } + void jtag_add_tlr(void) { jtag_prelude(TAP_RESET);