From: Jaehoon Chung Date: Fri, 16 May 2014 04:59:54 +0000 (+0900) Subject: mmc: support the DDR mode for eMMC X-Git-Tag: v2014.07-rc3~4^2~2^2~20 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=d22e3d46a918bde2e6d3bc3f5782548d5ed75358;p=u-boot mmc: support the DDR mode for eMMC Signed-off-by: Jaehoon Chung Tested-by: Lukasz Majewski Acked-by: Lukasz Majewski Signed-off-by: Minkyu Kang --- diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index dd6a6ef57c..08187d5f3e 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -158,6 +158,9 @@ int mmc_set_blocklen(struct mmc *mmc, int len) { struct mmc_cmd cmd; + if (mmc->card_caps & MMC_MODE_DDR_52MHz) + return 0; + cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = len; @@ -514,10 +517,13 @@ static int mmc_change_freq(struct mmc *mmc) return 0; /* High Speed is set, there are two types: 52MHz and 26MHz */ - if (cardtype & EXT_CSD_CARD_TYPE_52) + if (cardtype & EXT_CSD_CARD_TYPE_52) { + if (cardtype & EXT_CSD_CARD_TYPE_DDR_52) + mmc->card_caps |= MMC_MODE_DDR_52MHz; mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; - else + } else { mmc->card_caps |= MMC_MODE_HS; + } return 0; } @@ -1054,6 +1060,8 @@ static int mmc_startup(struct mmc *mmc) /* An array of possible bus widths in order of preference */ static unsigned ext_csd_bits[] = { + EXT_CSD_DDR_BUS_WIDTH_8, + EXT_CSD_DDR_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_8, EXT_CSD_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_1, @@ -1061,13 +1069,15 @@ static int mmc_startup(struct mmc *mmc) /* An array to map CSD bus widths to host cap bits */ static unsigned ext_to_hostcaps[] = { + [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz, + [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz, [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT, [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT, }; /* An array to map chosen bus width to an integer */ static unsigned widths[] = { - 8, 4, 1, + 8, 4, 8, 4, 1, }; for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) { diff --git a/include/mmc.h b/include/mmc.h index d5a896fbb1..aa2d1ca360 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -38,6 +38,7 @@ #define MMC_MODE_8BIT (1 << 3) #define MMC_MODE_SPI (1 << 4) #define MMC_MODE_HC (1 << 5) +#define MMC_MODE_DDR_52MHz (1 << 6) #define SD_DATA_4BIT 0x00040000 @@ -169,10 +170,16 @@ #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) +#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) +#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ + | EXT_CSD_CARD_TYPE_DDR_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ +#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)