From: Alexandru Gagniuc Date: Fri, 7 Jul 2017 18:36:57 +0000 (-0700) Subject: net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers X-Git-Tag: v2017.09-rc2~95^2~10 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=d397f7c45b0b87a7e1083c57a320c559e7848268;p=u-boot net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they share the same ID. Drivers for bothe PHYs cannot safely coexist, so the solution was to use #ifdefs to select between the two drivers. As a result KSZ9031, which has a unique ID, is now caught in the crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031 will not function properly, as some essential configuration code is ifdef'd-out. To prevent such situations, move the KSZ9000 drivers to a separate file, and place them under a separate Kconfig option. While it is possible to enable both KSZ8000 and KSZ9000 drivers at the same time, the assumption is that it is highly unlikely for a system to contain both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers will be enabled at any given time. Signed-off-by: Alexandru Gagniuc Reviewed-by: Philipp Tomsich Acked-by: Joe Hershberger --- diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 1afd8097b2..aecf7ed91f 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -69,6 +69,7 @@ if PHY_MICREL config PHY_MICREL_KSZ9021 bool "Micrel KSZ9021 family support" select PHY_GIGE + select PHY_MICREL_KSZ90X1 help Enable support for the Micrel KSZ9021 GbE PHY family. If enabled, the extended register read/write for KSZ9021 PHYs @@ -80,9 +81,12 @@ config PHY_MICREL_KSZ9021 KSZ8921BL, so enabling this option disables support for the KSZ8721BL. + Deprecated. Use PHY_MICREL_KSZ90X1 instead. + config PHY_MICREL_KSZ9031 bool "Micrel KSZ9031 family support" select PHY_GIGE + select PHY_MICREL_KSZ90X1 help Enable support for the Micrel KSZ9031 GbE PHY family. If enabled, the extended register read/write for KSZ9021 PHYs @@ -90,6 +94,32 @@ config PHY_MICREL_KSZ9031 delays configured in the device tree will be applied to the PHY during initialisatioin. + Deprecated. Use PHY_MICREL_KSZ90X1 instead. + +config PHY_MICREL_KSZ90X1 + bool "Micrel KSZ90x1 family support" + select PHY_GIGE + help + Enable support for the Micrel KSZ9021 and KSZ9031 GbE PHYs. If + enabled, the extended register read/write for KSZ90x1 PHYs + is supported through the 'mdio' command and any RGMII signal + delays configured in the device tree will be applied to the + PHY during initialization. + + This should not be enabled at the same time with PHY_MICREL_KSZ8XXX + as the KSZ9021 and KS8721 share the same ID. + +config PHY_MICREL_KSZ8XXX + bool "Micrel KSZ8xxx family support" + default y if !PHY_MICREL_KSZ90X1 + help + Enable support for the 8000 series GbE PHYs manufactured by Micrel + (now a part of Microchip). This includes drivers for the KSZ804, + KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, and KSZ8721. + + This should not be enabled at the same time with PHY_MICREL_KSZ90X1 + as the KSZ9021 and KS8721 share the same ID. + endif # PHY_MICREL config PHY_MSCC diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 88c00a5cd3..54f32f606b 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -19,7 +19,8 @@ obj-$(CONFIG_PHY_DAVICOM) += davicom.o obj-$(CONFIG_PHY_ET1011C) += et1011c.o obj-$(CONFIG_PHY_LXT) += lxt.o obj-$(CONFIG_PHY_MARVELL) += marvell.o -obj-$(CONFIG_PHY_MICREL) += micrel.o +obj-$(CONFIG_PHY_MICREL_KSZ8XXX) += micrel_ksz8xxx.o +obj-$(CONFIG_PHY_MICREL_KSZ90X1) += micrel_ksz90x1.o obj-$(CONFIG_PHY_NATSEMI) += natsemi.o obj-$(CONFIG_PHY_REALTEK) += realtek.o obj-$(CONFIG_PHY_SMSC) += smsc.o diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c deleted file mode 100644 index 0e4a4ebcc6..0000000000 --- a/drivers/net/phy/micrel.c +++ /dev/null @@ -1,555 +0,0 @@ -/* - * Micrel PHY drivers - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * author Andy Fleming - * (C) 2012 NetModule AG, David Andrey, added KSZ9031 - */ -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -static struct phy_driver KSZ804_driver = { - .name = "Micrel KSZ804", - .uid = 0x221510, - .mask = 0xfffff0, - .features = PHY_BASIC_FEATURES, - .config = &genphy_config, - .startup = &genphy_startup, - .shutdown = &genphy_shutdown, -}; - -#define MII_KSZPHY_OMSO 0x16 -#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) - -static int ksz_genconfig_bcastoff(struct phy_device *phydev) -{ - int ret; - - ret = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZPHY_OMSO); - if (ret < 0) - return ret; - - ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZPHY_OMSO, - ret | KSZPHY_OMSO_B_CAST_OFF); - if (ret < 0) - return ret; - - return genphy_config(phydev); -} - -static struct phy_driver KSZ8031_driver = { - .name = "Micrel KSZ8021/KSZ8031", - .uid = 0x221550, - .mask = 0xfffff0, - .features = PHY_BASIC_FEATURES, - .config = &ksz_genconfig_bcastoff, - .startup = &genphy_startup, - .shutdown = &genphy_shutdown, -}; - -/** - * KSZ8051 - */ -#define MII_KSZ8051_PHY_OMSO 0x16 -#define MII_KSZ8051_PHY_OMSO_NAND_TREE_ON (1 << 5) - -static int ksz8051_config(struct phy_device *phydev) -{ - unsigned val; - - /* Disable NAND-tree */ - val = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO); - val &= ~MII_KSZ8051_PHY_OMSO_NAND_TREE_ON; - phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO, val); - - return genphy_config(phydev); -} - -static struct phy_driver KSZ8051_driver = { - .name = "Micrel KSZ8051", - .uid = 0x221550, - .mask = 0xfffff0, - .features = PHY_BASIC_FEATURES, - .config = &ksz8051_config, - .startup = &genphy_startup, - .shutdown = &genphy_shutdown, -}; - -static struct phy_driver KSZ8081_driver = { - .name = "Micrel KSZ8081", - .uid = 0x221560, - .mask = 0xfffff0, - .features = PHY_BASIC_FEATURES, - .config = &ksz_genconfig_bcastoff, - .startup = &genphy_startup, - .shutdown = &genphy_shutdown, -}; - -/** - * KSZ8895 - */ - -static unsigned short smireg_to_phy(unsigned short reg) -{ - return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5); -} - -static unsigned short smireg_to_reg(unsigned short reg) -{ - return reg & 0x1F; -} - -static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val) -{ - phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE, - smireg_to_reg(smireg), val); -} - -#if 0 -static int ksz8895_read_smireg(struct phy_device *phydev, int smireg) -{ - return phydev->bus->read(phydev->bus, smireg_to_phy(smireg), - MDIO_DEVAD_NONE, smireg_to_reg(smireg)); -} -#endif - -int ksz8895_config(struct phy_device *phydev) -{ - /* we are connected directly to the switch without - * dedicated PHY. SCONF1 == 001 */ - phydev->link = 1; - phydev->duplex = DUPLEX_FULL; - phydev->speed = SPEED_100; - - /* Force the switch to start */ - ksz8895_write_smireg(phydev, 1, 1); - - return 0; -} - -static int ksz8895_startup(struct phy_device *phydev) -{ - return 0; -} - -static struct phy_driver ksz8895_driver = { - .name = "Micrel KSZ8895/KSZ8864", - .uid = 0x221450, - .mask = 0xffffe1, - .features = PHY_BASIC_FEATURES, - .config = &ksz8895_config, - .startup = &ksz8895_startup, - .shutdown = &genphy_shutdown, -}; - -#ifndef CONFIG_PHY_MICREL_KSZ9021 -/* - * I can't believe Micrel used the exact same part number - * for the KSZ9021. Shame Micrel, Shame! - */ -static struct phy_driver KS8721_driver = { - .name = "Micrel KS8721BL", - .uid = 0x221610, - .mask = 0xfffff0, - .features = PHY_BASIC_FEATURES, - .config = &genphy_config, - .startup = &genphy_startup, - .shutdown = &genphy_shutdown, -}; -#endif - - -/* - * KSZ9021 - KSZ9031 common - */ - -#define MII_KSZ90xx_PHY_CTL 0x1f -#define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6) -#define MIIM_KSZ90xx_PHYCTL_100 (1 << 5) -#define MIIM_KSZ90xx_PHYCTL_10 (1 << 4) -#define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3) - -static int ksz90xx_startup(struct phy_device *phydev) -{ - unsigned phy_ctl; - int ret; - - ret = genphy_update_link(phydev); - if (ret) - return ret; - - phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL); - - if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - - if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000) - phydev->speed = SPEED_1000; - else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100) - phydev->speed = SPEED_100; - else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10) - phydev->speed = SPEED_10; - return 0; -} - -/* Common OF config bits for KSZ9021 and KSZ9031 */ -#if defined(CONFIG_PHY_MICREL_KSZ9021) || defined(CONFIG_PHY_MICREL_KSZ9031) -#ifdef CONFIG_DM_ETH -struct ksz90x1_reg_field { - const char *name; - const u8 size; /* Size of the bitfield, in bits */ - const u8 off; /* Offset from bit 0 */ - const u8 dflt; /* Default value */ -}; - -struct ksz90x1_ofcfg { - const u16 reg; - const u16 devad; - const struct ksz90x1_reg_field *grp; - const u16 grpsz; -}; - -static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = { - { "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 }, - { "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 } -}; - -static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = { - { "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 }, - { "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 }, -}; - -static int ksz90x1_of_config_group(struct phy_device *phydev, - struct ksz90x1_ofcfg *ofcfg) -{ - struct udevice *dev = phydev->dev; - struct phy_driver *drv = phydev->drv; - const int ps_to_regval = 60; - int val[4]; - int i, changed = 0, offset, max; - u16 regval = 0; - - if (!drv || !drv->writeext) - return -EOPNOTSUPP; - - for (i = 0; i < ofcfg->grpsz; i++) { - val[i] = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), - ofcfg->grp[i].name, -1); - offset = ofcfg->grp[i].off; - if (val[i] == -1) { - /* Default register value for KSZ9021 */ - regval |= ofcfg->grp[i].dflt << offset; - } else { - changed = 1; /* Value was changed in OF */ - /* Calculate the register value and fix corner cases */ - if (val[i] > ps_to_regval * 0xf) { - max = (1 << ofcfg->grp[i].size) - 1; - regval |= max << offset; - } else { - regval |= (val[i] / ps_to_regval) << offset; - } - } - } - - if (!changed) - return 0; - - return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval); -} -#endif -#endif - -#ifdef CONFIG_PHY_MICREL_KSZ9021 -/* - * KSZ9021 - */ - -/* PHY Registers */ -#define MII_KSZ9021_EXTENDED_CTRL 0x0b -#define MII_KSZ9021_EXTENDED_DATAW 0x0c -#define MII_KSZ9021_EXTENDED_DATAR 0x0d - -#define CTRL1000_PREFER_MASTER (1 << 10) -#define CTRL1000_CONFIG_MASTER (1 << 11) -#define CTRL1000_MANUAL_CONFIG (1 << 12) - -#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \ - defined(CONFIG_PHY_MICREL_KSZ9031)) -static const struct ksz90x1_reg_field ksz9021_clk_grp[] = { - { "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 }, - { "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 }, -}; - -static int ksz9021_of_config(struct phy_device *phydev) -{ - struct ksz90x1_ofcfg ofcfg[] = { - { MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 }, - { MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 }, - { MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 }, - }; - int i, ret = 0; - - for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { - ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); - if (ret) - return ret; - } - - return 0; -} -#else -static int ksz9021_of_config(struct phy_device *phydev) -{ - return 0; -} -#endif - -int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val) -{ - /* extended registers */ - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000); - return phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9021_EXTENDED_DATAW, val); -} - -int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum) -{ - /* extended registers */ - phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum); - return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR); -} - - -static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr, - int regnum) -{ - return ksz9021_phy_extended_read(phydev, regnum); -} - -static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr, - int devaddr, int regnum, u16 val) -{ - return ksz9021_phy_extended_write(phydev, regnum, val); -} - -/* Micrel ksz9021 */ -static int ksz9021_config(struct phy_device *phydev) -{ - unsigned ctrl1000 = 0; - const unsigned master = CTRL1000_PREFER_MASTER | - CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG; - unsigned features = phydev->drv->features; - int ret; - - ret = ksz9021_of_config(phydev); - if (ret) - return ret; - - if (getenv("disable_giga")) - features &= ~(SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full); - /* force master mode for 1000BaseT due to chip errata */ - if (features & SUPPORTED_1000baseT_Half) - ctrl1000 |= ADVERTISE_1000HALF | master; - if (features & SUPPORTED_1000baseT_Full) - ctrl1000 |= ADVERTISE_1000FULL | master; - phydev->advertising = phydev->supported = features; - phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000); - genphy_config_aneg(phydev); - genphy_restart_aneg(phydev); - return 0; -} - -static struct phy_driver ksz9021_driver = { - .name = "Micrel ksz9021", - .uid = 0x221610, - .mask = 0xfffff0, - .features = PHY_GBIT_FEATURES, - .config = &ksz9021_config, - .startup = &ksz90xx_startup, - .shutdown = &genphy_shutdown, - .writeext = &ksz9021_phy_extwrite, - .readext = &ksz9021_phy_extread, -}; -#endif - -/** - * KSZ9031 - */ -/* PHY Registers */ -#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d -#define MII_KSZ9031_MMD_REG_DATA 0x0e - -#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \ - defined(CONFIG_PHY_MICREL_KSZ9031)) -static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = - { { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } }; -static const struct ksz90x1_reg_field ksz9031_clk_grp[] = - { { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } }; - -static int ksz9031_of_config(struct phy_device *phydev) -{ - struct ksz90x1_ofcfg ofcfg[] = { - { MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 }, - { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, - { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, - { MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 }, - }; - int i, ret = 0; - - for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { - ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); - if (ret) - return ret; - } - - return 0; -} - -static int ksz9031_center_flp_timing(struct phy_device *phydev) -{ - struct phy_driver *drv = phydev->drv; - int ret = 0; - - if (!drv || !drv->writeext) - return -EOPNOTSUPP; - - ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_LO, 0x1A80); - if (ret) - return ret; - - ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_HI, 0x6); - return ret; -} -#else -static int ksz9031_of_config(struct phy_device *phydev) -{ - return 0; -} -static int ksz9031_center_flp_timing(struct phy_device *phydev) -{ - return 0; -} -#endif - -/* Accessors to extended registers*/ -int ksz9031_phy_extended_write(struct phy_device *phydev, - int devaddr, int regnum, u16 mode, u16 val) -{ - /*select register addr for mmd*/ - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_ACCES_CTRL, devaddr); - /*select register for mmd*/ - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_REG_DATA, regnum); - /*setup mode*/ - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr)); - /*write the value*/ - return phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_REG_DATA, val); -} - -int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr, - int regnum, u16 mode) -{ - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_ACCES_CTRL, devaddr); - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_REG_DATA, regnum); - phy_write(phydev, MDIO_DEVAD_NONE, - MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode)); - return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA); -} - -static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr, - int regnum) -{ - return ksz9031_phy_extended_read(phydev, devaddr, regnum, - MII_KSZ9031_MOD_DATA_NO_POST_INC); -}; - -static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr, - int devaddr, int regnum, u16 val) -{ - return ksz9031_phy_extended_write(phydev, devaddr, regnum, - MII_KSZ9031_MOD_DATA_POST_INC_RW, val); -}; - -static int ksz9031_config(struct phy_device *phydev) -{ - int ret; - ret = ksz9031_of_config(phydev); - if (ret) - return ret; - ret = ksz9031_center_flp_timing(phydev); - if (ret) - return ret; - return genphy_config(phydev); -} - -static struct phy_driver ksz9031_driver = { - .name = "Micrel ksz9031", - .uid = 0x221620, - .mask = 0xfffff0, - .features = PHY_GBIT_FEATURES, - .config = &ksz9031_config, - .startup = &ksz90xx_startup, - .shutdown = &genphy_shutdown, - .writeext = &ksz9031_phy_extwrite, - .readext = &ksz9031_phy_extread, -}; - -int ksz886x_config(struct phy_device *phydev) -{ - /* we are connected directly to the switch without - * dedicated PHY. */ - phydev->link = 1; - phydev->duplex = DUPLEX_FULL; - phydev->speed = SPEED_100; - return 0; -} - -static int ksz886x_startup(struct phy_device *phydev) -{ - return 0; -} - -static struct phy_driver ksz886x_driver = { - .name = "Micrel KSZ886x Switch", - .uid = 0x00221430, - .mask = 0xfffff0, - .features = PHY_BASIC_FEATURES, - .config = &ksz886x_config, - .startup = &ksz886x_startup, - .shutdown = &genphy_shutdown, -}; - -int phy_micrel_init(void) -{ - phy_register(&KSZ804_driver); - phy_register(&KSZ8031_driver); - phy_register(&KSZ8051_driver); - phy_register(&KSZ8081_driver); -#ifdef CONFIG_PHY_MICREL_KSZ9021 - phy_register(&ksz9021_driver); -#else - phy_register(&KS8721_driver); -#endif - phy_register(&ksz9031_driver); - phy_register(&ksz8895_driver); - phy_register(&ksz886x_driver); - return 0; -} diff --git a/drivers/net/phy/micrel_ksz8xxx.c b/drivers/net/phy/micrel_ksz8xxx.c new file mode 100644 index 0000000000..552592bb44 --- /dev/null +++ b/drivers/net/phy/micrel_ksz8xxx.c @@ -0,0 +1,556 @@ +/* + * Micrel PHY drivers + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * (C) 2012 NetModule AG, David Andrey, added KSZ9031 + */ +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static struct phy_driver KSZ804_driver = { + .name = "Micrel KSZ804", + .uid = 0x221510, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +#define MII_KSZPHY_OMSO 0x16 +#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) + +static int ksz_genconfig_bcastoff(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZPHY_OMSO); + if (ret < 0) + return ret; + + ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZPHY_OMSO, + ret | KSZPHY_OMSO_B_CAST_OFF); + if (ret < 0) + return ret; + + return genphy_config(phydev); +} + +static struct phy_driver KSZ8031_driver = { + .name = "Micrel KSZ8021/KSZ8031", + .uid = 0x221550, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &ksz_genconfig_bcastoff, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +/** + * KSZ8051 + */ +#define MII_KSZ8051_PHY_OMSO 0x16 +#define MII_KSZ8051_PHY_OMSO_NAND_TREE_ON (1 << 5) + +static int ksz8051_config(struct phy_device *phydev) +{ + unsigned val; + + /* Disable NAND-tree */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO); + val &= ~MII_KSZ8051_PHY_OMSO_NAND_TREE_ON; + phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO, val); + + return genphy_config(phydev); +} + +static struct phy_driver KSZ8051_driver = { + .name = "Micrel KSZ8051", + .uid = 0x221550, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &ksz8051_config, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver KSZ8081_driver = { + .name = "Micrel KSZ8081", + .uid = 0x221560, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &ksz_genconfig_bcastoff, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +/** + * KSZ8895 + */ + +static unsigned short smireg_to_phy(unsigned short reg) +{ + return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5); +} + +static unsigned short smireg_to_reg(unsigned short reg) +{ + return reg & 0x1F; +} + +static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val) +{ + phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE, + smireg_to_reg(smireg), val); +} + +#if 0 +static int ksz8895_read_smireg(struct phy_device *phydev, int smireg) +{ + return phydev->bus->read(phydev->bus, smireg_to_phy(smireg), + MDIO_DEVAD_NONE, smireg_to_reg(smireg)); +} +#endif + +int ksz8895_config(struct phy_device *phydev) +{ + /* we are connected directly to the switch without + * dedicated PHY. SCONF1 == 001 */ + phydev->link = 1; + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_100; + + /* Force the switch to start */ + ksz8895_write_smireg(phydev, 1, 1); + + return 0; +} + +static int ksz8895_startup(struct phy_device *phydev) +{ + return 0; +} + +static struct phy_driver ksz8895_driver = { + .name = "Micrel KSZ8895/KSZ8864", + .uid = 0x221450, + .mask = 0xffffe1, + .features = PHY_BASIC_FEATURES, + .config = &ksz8895_config, + .startup = &ksz8895_startup, + .shutdown = &genphy_shutdown, +}; + +#ifndef CONFIG_PHY_MICREL_KSZ9021 +/* + * I can't believe Micrel used the exact same part number + * for the KSZ9021. Shame Micrel, Shame! + */ +static struct phy_driver KS8721_driver = { + .name = "Micrel KS8721BL", + .uid = 0x221610, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; +#endif + + +/* + * KSZ9021 - KSZ9031 common + */ + +#define MII_KSZ90xx_PHY_CTL 0x1f +#define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6) +#define MIIM_KSZ90xx_PHYCTL_100 (1 << 5) +#define MIIM_KSZ90xx_PHYCTL_10 (1 << 4) +#define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3) + +static int ksz90xx_startup(struct phy_device *phydev) +{ + unsigned phy_ctl; + int ret; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL); + + if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000) + phydev->speed = SPEED_1000; + else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100) + phydev->speed = SPEED_100; + else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10) + phydev->speed = SPEED_10; + return 0; +} + +/* Common OF config bits for KSZ9021 and KSZ9031 */ +#if defined(CONFIG_PHY_MICREL_KSZ9021) || defined(CONFIG_PHY_MICREL_KSZ9031) +#ifdef CONFIG_DM_ETH +struct ksz90x1_reg_field { + const char *name; + const u8 size; /* Size of the bitfield, in bits */ + const u8 off; /* Offset from bit 0 */ + const u8 dflt; /* Default value */ +}; + +struct ksz90x1_ofcfg { + const u16 reg; + const u16 devad; + const struct ksz90x1_reg_field *grp; + const u16 grpsz; +}; + +static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = { + { "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 }, + { "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 } +}; + +static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = { + { "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 }, + { "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 }, +}; + +static int ksz90x1_of_config_group(struct phy_device *phydev, + struct ksz90x1_ofcfg *ofcfg) +{ + struct udevice *dev = phydev->dev; + struct phy_driver *drv = phydev->drv; + const int ps_to_regval = 60; + int val[4]; + int i, changed = 0, offset, max; + u16 regval = 0; + + if (!drv || !drv->writeext) + return -EOPNOTSUPP; + + for (i = 0; i < ofcfg->grpsz; i++) { + val[i] = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), + ofcfg->grp[i].name, -1); + offset = ofcfg->grp[i].off; + if (val[i] == -1) { + /* Default register value for KSZ9021 */ + regval |= ofcfg->grp[i].dflt << offset; + } else { + changed = 1; /* Value was changed in OF */ + /* Calculate the register value and fix corner cases */ + if (val[i] > ps_to_regval * 0xf) { + max = (1 << ofcfg->grp[i].size) - 1; + regval |= max << offset; + } else { + regval |= (val[i] / ps_to_regval) << offset; + } + } + } + + if (!changed) + return 0; + + return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval); +} +#endif +#endif + +#ifdef CONFIG_PHY_MICREL_KSZ9021 +/* + * KSZ9021 + */ + +/* PHY Registers */ +#define MII_KSZ9021_EXTENDED_CTRL 0x0b +#define MII_KSZ9021_EXTENDED_DATAW 0x0c +#define MII_KSZ9021_EXTENDED_DATAR 0x0d + +#define CTRL1000_PREFER_MASTER (1 << 10) +#define CTRL1000_CONFIG_MASTER (1 << 11) +#define CTRL1000_MANUAL_CONFIG (1 << 12) + +#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \ + defined(CONFIG_PHY_MICREL_KSZ9031)) +static const struct ksz90x1_reg_field ksz9021_clk_grp[] = { + { "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 }, + { "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 }, +}; + +static int ksz9021_of_config(struct phy_device *phydev) +{ + struct ksz90x1_ofcfg ofcfg[] = { + { MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 }, + { MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 }, + { MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 }, + }; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { + ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); + if (ret) + return ret; + } + + return 0; +} +#else +static int ksz9021_of_config(struct phy_device *phydev) +{ + return 0; +} +#endif + +int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val) +{ + /* extended registers */ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000); + return phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9021_EXTENDED_DATAW, val); +} + +int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum) +{ + /* extended registers */ + phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum); + return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR); +} + + +static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9021_phy_extended_read(phydev, regnum); +} + +static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9021_phy_extended_write(phydev, regnum, val); +} + +/* Micrel ksz9021 */ +static int ksz9021_config(struct phy_device *phydev) +{ + unsigned ctrl1000 = 0; + const unsigned master = CTRL1000_PREFER_MASTER | + CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG; + unsigned features = phydev->drv->features; + int ret; + + ret = ksz9021_of_config(phydev); + if (ret) + return ret; + + if (getenv("disable_giga")) + features &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + /* force master mode for 1000BaseT due to chip errata */ + if (features & SUPPORTED_1000baseT_Half) + ctrl1000 |= ADVERTISE_1000HALF | master; + if (features & SUPPORTED_1000baseT_Full) + ctrl1000 |= ADVERTISE_1000FULL | master; + phydev->advertising = features; + phydev->supported = features; + phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000); + genphy_config_aneg(phydev); + genphy_restart_aneg(phydev); + return 0; +} + +static struct phy_driver ksz9021_driver = { + .name = "Micrel ksz9021", + .uid = 0x221610, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &ksz9021_config, + .startup = &ksz90xx_startup, + .shutdown = &genphy_shutdown, + .writeext = &ksz9021_phy_extwrite, + .readext = &ksz9021_phy_extread, +}; +#endif + +/** + * KSZ9031 + */ +/* PHY Registers */ +#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d +#define MII_KSZ9031_MMD_REG_DATA 0x0e + +#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \ + defined(CONFIG_PHY_MICREL_KSZ9031)) +static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = + { { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } }; +static const struct ksz90x1_reg_field ksz9031_clk_grp[] = + { { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } }; + +static int ksz9031_of_config(struct phy_device *phydev) +{ + struct ksz90x1_ofcfg ofcfg[] = { + { MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 }, + { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, + { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, + { MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 }, + }; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { + ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); + if (ret) + return ret; + } + + return 0; +} + +static int ksz9031_center_flp_timing(struct phy_device *phydev) +{ + struct phy_driver *drv = phydev->drv; + int ret = 0; + + if (!drv || !drv->writeext) + return -EOPNOTSUPP; + + ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_LO, 0x1A80); + if (ret) + return ret; + + ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_HI, 0x6); + return ret; +} +#else +static int ksz9031_of_config(struct phy_device *phydev) +{ + return 0; +} +static int ksz9031_center_flp_timing(struct phy_device *phydev) +{ + return 0; +} +#endif + +/* Accessors to extended registers*/ +int ksz9031_phy_extended_write(struct phy_device *phydev, + int devaddr, int regnum, u16 mode, u16 val) +{ + /*select register addr for mmd*/ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, devaddr); + /*select register for mmd*/ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_REG_DATA, regnum); + /*setup mode*/ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr)); + /*write the value*/ + return phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_REG_DATA, val); +} + +int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr, + int regnum, u16 mode) +{ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, devaddr); + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_REG_DATA, regnum); + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode)); + return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA); +} + +static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9031_phy_extended_read(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_NO_POST_INC); +} + +static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9031_phy_extended_write(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_POST_INC_RW, val); +} + +static int ksz9031_config(struct phy_device *phydev) +{ + int ret; + ret = ksz9031_of_config(phydev); + if (ret) + return ret; + ret = ksz9031_center_flp_timing(phydev); + if (ret) + return ret; + return genphy_config(phydev); +} + +static struct phy_driver ksz9031_driver = { + .name = "Micrel ksz9031", + .uid = 0x221620, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &ksz9031_config, + .startup = &ksz90xx_startup, + .shutdown = &genphy_shutdown, + .writeext = &ksz9031_phy_extwrite, + .readext = &ksz9031_phy_extread, +}; + +int ksz886x_config(struct phy_device *phydev) +{ + /* we are connected directly to the switch without + * dedicated PHY. */ + phydev->link = 1; + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_100; + return 0; +} + +static int ksz886x_startup(struct phy_device *phydev) +{ + return 0; +} + +static struct phy_driver ksz886x_driver = { + .name = "Micrel KSZ886x Switch", + .uid = 0x00221430, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &ksz886x_config, + .startup = &ksz886x_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_micrel_ksz8xxx_init(void) +{ + phy_register(&KSZ804_driver); + phy_register(&KSZ8031_driver); + phy_register(&KSZ8051_driver); + phy_register(&KSZ8081_driver); +#ifdef CONFIG_PHY_MICREL_KSZ9021 + phy_register(&ksz9021_driver); +#else + phy_register(&KS8721_driver); +#endif + phy_register(&ksz9031_driver); + phy_register(&ksz8895_driver); + phy_register(&ksz886x_driver); + return 0; +} diff --git a/drivers/net/phy/micrel_ksz90x1.c b/drivers/net/phy/micrel_ksz90x1.c new file mode 100644 index 0000000000..785143d089 --- /dev/null +++ b/drivers/net/phy/micrel_ksz90x1.c @@ -0,0 +1,364 @@ +/* + * Micrel PHY drivers + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * (C) 2012 NetModule AG, David Andrey, added KSZ9031 + * (C) Copyright 2017 Adaptrum, Inc. + * Written by Alexandru Gagniuc for Adaptrum, Inc. + */ +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * KSZ9021 - KSZ9031 common + */ + +#define MII_KSZ90xx_PHY_CTL 0x1f +#define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6) +#define MIIM_KSZ90xx_PHYCTL_100 (1 << 5) +#define MIIM_KSZ90xx_PHYCTL_10 (1 << 4) +#define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3) + +/* KSZ9021 PHY Registers */ +#define MII_KSZ9021_EXTENDED_CTRL 0x0b +#define MII_KSZ9021_EXTENDED_DATAW 0x0c +#define MII_KSZ9021_EXTENDED_DATAR 0x0d + +#define CTRL1000_PREFER_MASTER (1 << 10) +#define CTRL1000_CONFIG_MASTER (1 << 11) +#define CTRL1000_MANUAL_CONFIG (1 << 12) + +/* KSZ9031 PHY Registers */ +#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d +#define MII_KSZ9031_MMD_REG_DATA 0x0e + +static int ksz90xx_startup(struct phy_device *phydev) +{ + unsigned phy_ctl; + int ret; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL); + + if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000) + phydev->speed = SPEED_1000; + else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100) + phydev->speed = SPEED_100; + else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10) + phydev->speed = SPEED_10; + return 0; +} + +/* Common OF config bits for KSZ9021 and KSZ9031 */ +#ifdef CONFIG_DM_ETH +struct ksz90x1_reg_field { + const char *name; + const u8 size; /* Size of the bitfield, in bits */ + const u8 off; /* Offset from bit 0 */ + const u8 dflt; /* Default value */ +}; + +struct ksz90x1_ofcfg { + const u16 reg; + const u16 devad; + const struct ksz90x1_reg_field *grp; + const u16 grpsz; +}; + +static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = { + { "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 }, + { "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 } +}; + +static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = { + { "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 }, + { "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 }, +}; + +static const struct ksz90x1_reg_field ksz9021_clk_grp[] = { + { "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 }, + { "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 }, +}; + +static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = { + { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } +}; + +static const struct ksz90x1_reg_field ksz9031_clk_grp[] = { + { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } +}; + +static int ksz90x1_of_config_group(struct phy_device *phydev, + struct ksz90x1_ofcfg *ofcfg) +{ + struct udevice *dev = phydev->dev; + struct phy_driver *drv = phydev->drv; + const int ps_to_regval = 60; + int val[4]; + int i, changed = 0, offset, max; + u16 regval = 0; + + if (!drv || !drv->writeext) + return -EOPNOTSUPP; + + for (i = 0; i < ofcfg->grpsz; i++) { + val[i] = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), + ofcfg->grp[i].name, -1); + offset = ofcfg->grp[i].off; + if (val[i] == -1) { + /* Default register value for KSZ9021 */ + regval |= ofcfg->grp[i].dflt << offset; + } else { + changed = 1; /* Value was changed in OF */ + /* Calculate the register value and fix corner cases */ + if (val[i] > ps_to_regval * 0xf) { + max = (1 << ofcfg->grp[i].size) - 1; + regval |= max << offset; + } else { + regval |= (val[i] / ps_to_regval) << offset; + } + } + } + + if (!changed) + return 0; + + return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval); +} + +static int ksz9021_of_config(struct phy_device *phydev) +{ + struct ksz90x1_ofcfg ofcfg[] = { + { MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 }, + { MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 }, + { MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 }, + }; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { + ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); + if (ret) + return ret; + } + + return 0; +} + +static int ksz9031_of_config(struct phy_device *phydev) +{ + struct ksz90x1_ofcfg ofcfg[] = { + { MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 }, + { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, + { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, + { MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 }, + }; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { + ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); + if (ret) + return ret; + } + + return 0; +} + +static int ksz9031_center_flp_timing(struct phy_device *phydev) +{ + struct phy_driver *drv = phydev->drv; + int ret = 0; + + if (!drv || !drv->writeext) + return -EOPNOTSUPP; + + ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_LO, 0x1A80); + if (ret) + return ret; + + ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_HI, 0x6); + return ret; +} + +#else /* !CONFIG_DM_ETH */ +static int ksz9021_of_config(struct phy_device *phydev) +{ + return 0; +} + +static int ksz9031_of_config(struct phy_device *phydev) +{ + return 0; +} + +static int ksz9031_center_flp_timing(struct phy_device *phydev) +{ + return 0; +} +#endif + +/* + * KSZ9021 + */ +int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val) +{ + /* extended registers */ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000); + return phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9021_EXTENDED_DATAW, val); +} + +int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum) +{ + /* extended registers */ + phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum); + return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR); +} + + +static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9021_phy_extended_read(phydev, regnum); +} + +static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9021_phy_extended_write(phydev, regnum, val); +} + +static int ksz9021_config(struct phy_device *phydev) +{ + unsigned ctrl1000 = 0; + const unsigned master = CTRL1000_PREFER_MASTER | + CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG; + unsigned features = phydev->drv->features; + int ret; + + ret = ksz9021_of_config(phydev); + if (ret) + return ret; + + if (getenv("disable_giga")) + features &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + /* force master mode for 1000BaseT due to chip errata */ + if (features & SUPPORTED_1000baseT_Half) + ctrl1000 |= ADVERTISE_1000HALF | master; + if (features & SUPPORTED_1000baseT_Full) + ctrl1000 |= ADVERTISE_1000FULL | master; + phydev->advertising = features; + phydev->supported = features; + phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000); + genphy_config_aneg(phydev); + genphy_restart_aneg(phydev); + return 0; +} + +static struct phy_driver ksz9021_driver = { + .name = "Micrel ksz9021", + .uid = 0x221610, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &ksz9021_config, + .startup = &ksz90xx_startup, + .shutdown = &genphy_shutdown, + .writeext = &ksz9021_phy_extwrite, + .readext = &ksz9021_phy_extread, +}; + +/* + * KSZ9031 + */ +int ksz9031_phy_extended_write(struct phy_device *phydev, + int devaddr, int regnum, u16 mode, u16 val) +{ + /*select register addr for mmd*/ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, devaddr); + /*select register for mmd*/ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_REG_DATA, regnum); + /*setup mode*/ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr)); + /*write the value*/ + return phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_REG_DATA, val); +} + +int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr, + int regnum, u16 mode) +{ + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, devaddr); + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_REG_DATA, regnum); + phy_write(phydev, MDIO_DEVAD_NONE, + MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode)); + return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA); +} + +static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9031_phy_extended_read(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_NO_POST_INC); +} + +static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9031_phy_extended_write(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_POST_INC_RW, val); +} + +static int ksz9031_config(struct phy_device *phydev) +{ + int ret; + ret = ksz9031_of_config(phydev); + if (ret) + return ret; + ret = ksz9031_center_flp_timing(phydev); + if (ret) + return ret; + return genphy_config(phydev); +} + +static struct phy_driver ksz9031_driver = { + .name = "Micrel ksz9031", + .uid = 0x221620, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &ksz9031_config, + .startup = &ksz90xx_startup, + .shutdown = &genphy_shutdown, + .writeext = &ksz9031_phy_extwrite, + .readext = &ksz9031_phy_extread, +}; + +int phy_micrel_ksz90x1_init(void) +{ + phy_register(&ksz9021_driver); + phy_register(&ksz9031_driver); + return 0; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 97e0bc022b..5be51d73ce 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -488,8 +488,11 @@ int phy_init(void) #ifdef CONFIG_PHY_MARVELL phy_marvell_init(); #endif -#ifdef CONFIG_PHY_MICREL - phy_micrel_init(); +#ifdef CONFIG_PHY_MICREL_KSZ8XXX + phy_micrel_ksz8xxx_init(); +#endif +#ifdef CONFIG_PHY_MICREL_KSZ90X1 + phy_micrel_ksz90x1_init(); #endif #ifdef CONFIG_PHY_NATSEMI phy_natsemi_init(); diff --git a/include/phy.h b/include/phy.h index 4f2094bdf0..a0b1f12317 100644 --- a/include/phy.h +++ b/include/phy.h @@ -266,7 +266,8 @@ int phy_davicom_init(void); int phy_et1011c_init(void); int phy_lxt_init(void); int phy_marvell_init(void); -int phy_micrel_init(void); +int phy_micrel_ksz8xxx_init(void); +int phy_micrel_ksz90x1_init(void); int phy_natsemi_init(void); int phy_realtek_init(void); int phy_smsc_init(void);