From: Paul Fertser <fercerpav@gmail.com>
Date: Wed, 18 Sep 2013 19:42:50 +0000 (+0400)
Subject: bcm2835gpio: use maximum drive strength
X-Git-Tag: v0.8.0-rc1~220
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=d4993beec4bcb4f667f2d6120d238a70d07489b4;p=openocd

bcm2835gpio: use maximum drive strength

According to the docs, the default drive strength for the GPIO pads is
8mA but they're capable of 16mA. Configure GPIO 0-27 to use the maximum
(as they might be used on high enough frequency with JTAG).

Change-Id: I621737a1b0a855bb97b56ce2cc46c0e385b74f5d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1633
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/src/jtag/drivers/bcm2835gpio.c b/src/jtag/drivers/bcm2835gpio.c
index 5af92c36..a2ba8e64 100644
--- a/src/jtag/drivers/bcm2835gpio.c
+++ b/src/jtag/drivers/bcm2835gpio.c
@@ -33,6 +33,9 @@
 #define BCM2835_PERI_BASE	0x20000000
 #define BCM2835_GPIO_BASE	(BCM2835_PERI_BASE + 0x200000) /* GPIO controller */
 
+#define BCM2835_PADS_GPIO_0_27		(BCM2835_PERI_BASE + 0x100000)
+#define BCM2835_PADS_GPIO_0_27_OFFSET	(0x2c / 4)
+
 /* GPIO setup macros */
 #define MODE_GPIO(g) (*(pio_base+((g)/10))>>(((g)%10)*3) & 7)
 #define INP_GPIO(g) do { *(pio_base+((g)/10)) &= ~(7<<(((g)%10)*3)); } while (0)
@@ -319,6 +322,19 @@ static int bcm2835gpio_init(void)
 		return ERROR_JTAG_INIT_FAILED;
 	}
 
+	static volatile uint32_t *pads_base;
+	pads_base = mmap(NULL, sysconf(_SC_PAGE_SIZE), PROT_READ | PROT_WRITE,
+				MAP_SHARED, dev_mem_fd, BCM2835_PADS_GPIO_0_27);
+
+	if (pads_base == MAP_FAILED) {
+		perror("mmap");
+		close(dev_mem_fd);
+		return ERROR_JTAG_INIT_FAILED;
+	}
+
+	/* set 16mA drive strength */
+	pads_base[BCM2835_PADS_GPIO_0_27_OFFSET] = 0x5a000018 + 7;
+
 	tdo_gpio_mode = MODE_GPIO(tdo_gpio);
 	tdi_gpio_mode = MODE_GPIO(tdi_gpio);
 	tck_gpio_mode = MODE_GPIO(tck_gpio);