From: Stephen Warren Date: Wed, 3 Jan 2018 21:32:34 +0000 (-0700) Subject: ARM: Tegra186: search for best RAM bank X-Git-Tag: v2018.03-rc1~193^2~5 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=d5859255d9799db8f18ac3487ec3ac9427503edb;p=u-boot ARM: Tegra186: search for best RAM bank In the future, the list of DRAM regions passed to U-Boot in the DTB may be quite long and fragmented. Due to this, U-Boot must search through the regions to find the best region to relocate into, rather than relying on the current assumption that the top of bank 0 is a reasonable relocation target. This change implements such searching. Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/arch/arm/mach-tegra/tegra186/nvtboot_mem.c b/arch/arm/mach-tegra/tegra186/nvtboot_mem.c index 5a165a9d8e..33e331f4ca 100644 --- a/arch/arm/mach-tegra/tegra186/nvtboot_mem.c +++ b/arch/arm/mach-tegra/tegra186/nvtboot_mem.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2016, NVIDIA CORPORATION. + * Copyright (c) 2016-2018, NVIDIA CORPORATION. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,27 +9,51 @@ #include #include +#define SZ_4G 0x100000000ULL + +/* + * Size of a region that's large enough to hold the relocated U-Boot and all + * other allocations made around it (stack, heap, page tables, etc.) + * In practice, running "bdinfo" at the shell prompt, the stack reaches about + * 5MB from the address selected for ram_top as of the time of writing, + * so a 16MB region should be plenty. + */ +#define MIN_USABLE_RAM_SIZE SZ_16M +/* + * The amount of space we expect to require for stack usage. Used to validate + * that all reservations fit into the region selected for the relocation target + */ +#define MIN_USABLE_STACK_SIZE SZ_1M + DECLARE_GLOBAL_DATA_PTR; extern unsigned long nvtboot_boot_x0; /* - * A parsed version of /memory/reg from the DTB that is passed to U-Boot in x0. - * - * We assume bank 0 is RAM completely below 4G mostly ignore other banks; - * assuming they contain RAM above 4G. This is all a fairly safe assumption, - * since the L4T kernel makes the same assumption, so the bootloader is - * unlikely to change. - * - * This is written to before relocation, and hence cannot be in .bss, since - * .bss overlaps the DTB that's appended to the U-Boot binary. The initializer - * forces this into .data and avoids this issue. This also has the nice side- - * effect of the content being valid after relocation. + * These variables are written to before relocation, and hence cannot be + * in.bss, since .bss overlaps the DTB that's appended to the U-Boot binary. + * The section attribute forces this into .data and avoids this issue. This + * also has the nice side-effect of the content being valid after relocation. */ + +/* A parsed version of /memory/reg from the DTB passed to U-Boot in x0 */ static struct { u64 start; u64 size; -} ram_banks[CONFIG_NR_DRAM_BANKS] = {{1}}; +} ram_banks[CONFIG_NR_DRAM_BANKS] __attribute__((section(".data"))); + +/* The number of valid entries in ram_banks[] */ +static int ram_bank_count __attribute__((section(".data"))); + +/* + * The usable top-of-RAM for U-Boot. This is both: + * a) Below 4GB to avoid issues with peripherals that use 32-bit addressing. + * b) At the end of a region that has enough space to hold the relocated U-Boot + * and all other allocations made around it (stack, heap, page tables, etc.) + */ +static u64 ram_top __attribute__((section(".data"))); +/* The base address of the region of RAM that ends at ram_top */ +static u64 region_base __attribute__((section(".data"))); int dram_init(void) { @@ -59,32 +83,58 @@ int dram_init(void) len /= (na + ns); /* Convert cells to number of banks */ if (len > ARRAY_SIZE(ram_banks)) len = ARRAY_SIZE(ram_banks); + ram_bank_count = len; gd->ram_size = 0; - for (i = 0; i < len; i++) { + for (i = 0; i < ram_bank_count; i++) { + u64 bank_end, usable_bank_size; + ram_banks[i].start = fdt_read_number(prop, na); prop += na; ram_banks[i].size = fdt_read_number(prop, ns); prop += ns; gd->ram_size += ram_banks[i].size; + debug("Bank %d: start: %llx size: %llx\n", i, + ram_banks[i].start, ram_banks[i].size); + + bank_end = ram_banks[i].start + ram_banks[i].size; + debug(" end %llx\n", bank_end); + if (bank_end > SZ_4G) + bank_end = SZ_4G; + debug(" end %llx (usable)\n", bank_end); + usable_bank_size = bank_end - ram_banks[i].start; + debug(" size %llx (usable)\n", usable_bank_size); + if ((usable_bank_size >= MIN_USABLE_RAM_SIZE) && + (bank_end > ram_top)) { + ram_top = bank_end; + region_base = ram_banks[i].start; + debug("ram top now %llx\n", ram_top); + } + } + if (!ram_top) { + pr_err("Can't find a usable RAM top"); + hang(); } return 0; } -extern unsigned long nvtboot_boot_x0; - int dram_init_banksize(void) { int i; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + if ((gd->start_addr_sp - region_base) < MIN_USABLE_STACK_SIZE) { + pr_err("Reservations exceed chosen region size"); + hang(); + } + + for (i = 0; i < ram_bank_count; i++) { gd->bd->bi_dram[i].start = ram_banks[i].start; gd->bd->bi_dram[i].size = ram_banks[i].size; } #ifdef CONFIG_PCI - gd->pci_ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; + gd->pci_ram_top = ram_top; #endif return 0; @@ -92,5 +142,5 @@ int dram_init_banksize(void) ulong board_get_usable_ram_top(ulong total_size) { - return ram_banks[0].start + ram_banks[0].size; + return ram_top; }