From: Antony Pavlov Date: Sun, 20 Sep 2015 13:52:37 +0000 (+0300) Subject: tcl/target|board: move common AR9331 code to atheros_ar9331.cfg X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=dcf977c89a24b02fd8200af633be1fdd3add4ae7;p=openocd tcl/target|board: move common AR9331 code to atheros_ar9331.cfg The ar9331_25mhz_pll_init and ar9331_ddr1_init routines can be used not only for TP-Link MR3020 board, so move them to the common atheros_ar9331.cfg file. Change-Id: I04090856b08151d6bb0f5ef9cc654efae1c81835 Signed-off-by: Antony Pavlov Reviewed-on: http://openocd.zylin.com/2999 Tested-by: jenkins Reviewed-by: Paul Fertser --- diff --git a/tcl/board/tp-link_tl-mr3020.cfg b/tcl/board/tp-link_tl-mr3020.cfg index 7e040b32..48fb6989 100644 --- a/tcl/board/tp-link_tl-mr3020.cfg +++ b/tcl/board/tp-link_tl-mr3020.cfg @@ -1,39 +1,5 @@ source [find target/atheros_ar9331.cfg] -proc ar9331_25mhz_pll_init {} { - mww 0xb8050008 0x00018004 ;# bypass PLL; AHB_POST_DIV - ratio 4 - mww 0xb8050004 0x00000352 ;# 34000(ns)/40ns(25MHz) = 0x352 (850) - mww 0xb8050000 0x40818000 ;# Power down control for CPU PLL - ;# OUTDIV | REFDIV | DIV_INT - mww 0xb8050010 0x001003e8 ;# CPU PLL Dither FRAC Register - ;# (disabled?) - mww 0xb8050000 0x00818000 ;# Power on | OUTDIV | REFDIV | DIV_INT - mww 0xb8050008 0x00008000 ;# remove bypass; - ;# AHB_POST_DIV - ratio 2 -} - -proc ar9331_ddr1_init {} { - mww 0xb8000000 0x7fbc8cd0 ;# DDR_CONFIG - lots of DRAM confs - mww 0xb8000004 0x9dd0e6a8 ;# DDR_CONFIG2 - more DRAM confs - - mww 0xb8000010 0x8 ;# Forces a PRECHARGE ALL cycle - mww 0xb8000008 0x133 ;# mode reg: 0x133 - default - mww 0xb8000010 0x1 ;# Forces an MRS update cycl - mww 0xb800000c 0x2 ;# Extended mode register value. - ;# default 0x2 - Reset to weak driver, DLL on - mww 0xb8000010 0x2 ;# Forces an EMRS update cycle - mww 0xb8000010 0x8 ;# Forces a PRECHARGE ALL cycle - mww 0xb8000008 0x33 ;# mode reg: remove some bit? - mww 0xb8000010 0x1 ;# Forces an MRS update cycl - mww 0xb8000014 0x4186 ;# enable refres: bit(14) - set refresh rate - mww 0xb800001c 0x8 ;# This register is used along with DQ Lane 0, - ;# DQ[7:0], DQS_0 - mww 0xb8000020 0x9 ;# This register is used along with DQ Lane 1, - ;# DQ[15:8], DQS_1. - mww 0xb8000018 0xff ;# DDR read and capture bit mask. - ;# Each bit represents a cycle of valid data. -} - $_TARGETNAME configure -event reset-init { ar9331_25mhz_pll_init sleep 1 diff --git a/tcl/target/atheros_ar9331.cfg b/tcl/target/atheros_ar9331.cfg index c5609bb1..cd691833 100644 --- a/tcl/target/atheros_ar9331.cfg +++ b/tcl/target/atheros_ar9331.cfg @@ -14,3 +14,37 @@ jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id $_CPUTAPID set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME mips_m4k -endian big -chain-position $_TARGETNAME + +proc ar9331_25mhz_pll_init {} { + mww 0xb8050008 0x00018004 ;# bypass PLL; AHB_POST_DIV - ratio 4 + mww 0xb8050004 0x00000352 ;# 34000(ns)/40ns(25MHz) = 0x352 (850) + mww 0xb8050000 0x40818000 ;# Power down control for CPU PLL + ;# OUTDIV | REFDIV | DIV_INT + mww 0xb8050010 0x001003e8 ;# CPU PLL Dither FRAC Register + ;# (disabled?) + mww 0xb8050000 0x00818000 ;# Power on | OUTDIV | REFDIV | DIV_INT + mww 0xb8050008 0x00008000 ;# remove bypass; + ;# AHB_POST_DIV - ratio 2 +} + +proc ar9331_ddr1_init {} { + mww 0xb8000000 0x7fbc8cd0 ;# DDR_CONFIG - lots of DRAM confs + mww 0xb8000004 0x9dd0e6a8 ;# DDR_CONFIG2 - more DRAM confs + + mww 0xb8000010 0x8 ;# Forces a PRECHARGE ALL cycle + mww 0xb8000008 0x133 ;# mode reg: 0x133 - default + mww 0xb8000010 0x1 ;# Forces an MRS update cycl + mww 0xb800000c 0x2 ;# Extended mode register value. + ;# default 0x2 - Reset to weak driver, DLL on + mww 0xb8000010 0x2 ;# Forces an EMRS update cycle + mww 0xb8000010 0x8 ;# Forces a PRECHARGE ALL cycle + mww 0xb8000008 0x33 ;# mode reg: remove some bit? + mww 0xb8000010 0x1 ;# Forces an MRS update cycl + mww 0xb8000014 0x4186 ;# enable refres: bit(14) - set refresh rate + mww 0xb800001c 0x8 ;# This register is used along with DQ Lane 0, + ;# DQ[7:0], DQS_0 + mww 0xb8000020 0x9 ;# This register is used along with DQ Lane 1, + ;# DQ[15:8], DQS_1. + mww 0xb8000018 0xff ;# DDR read and capture bit mask. + ;# Each bit represents a cycle of valid data. +}