From: Masahiro Yamada Date: Mon, 30 Jan 2017 10:46:55 +0000 (+0900) Subject: mmc: atmel: rename CONFIG_ATMEL_SDHCI to CONFIG_MMC_SDHCI_ATMEL X-Git-Tag: v2017.03-rc2~120 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=dd3b64eb56dae10016bd314e59a650da511c1a4e;p=u-boot mmc: atmel: rename CONFIG_ATMEL_SDHCI to CONFIG_MMC_SDHCI_ATMEL Make the naming scheme consistent; all SDHCI-base drivers prefixed with CONFIG_MMC_SDHCI_. While we are here, add "depends on ARCH_AT91". Signed-off-by: Masahiro Yamada --- diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index a6daef40b1..000acee4c7 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -43,7 +43,7 @@ CONFIG_ATMEL_PIO4=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y CONFIG_DM_MMC=y -CONFIG_ATMEL_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y CONFIG_MMC_SDHCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index 41ab772fe6..0838e41573 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -42,7 +42,7 @@ CONFIG_ATMEL_PIO4=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y CONFIG_DM_MMC=y -CONFIG_ATMEL_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y CONFIG_MMC_SDHCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 520e7ea182..0c07781115 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -51,17 +51,6 @@ config SPL_MMC_TINY operations too, which can remove the need for malloc support in SPL and thus further reduce footprint. -config ATMEL_SDHCI - bool "Atmel SDHCI controller support" - depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 - depends on MMC_SDHCI - help - This enables support for the Atmel SDHCI controller, which supports - the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD - Memory Card Specification V3.0, and the SDIO V3.0 specification. - It is compliant with the SD Host Controller Standard V3.0 - specification. - config MMC_DAVINCI bool "TI DAVINCI Multimedia Card Interface support" depends on ARCH_DAVINCI @@ -191,6 +180,18 @@ config MMC_SDHCI_SDMA This enables support for the SDMA (Single Operation DMA) defined in the SD Host Controller Standard Specification Version 1.00 . +config MMC_SDHCI_ATMEL + bool "Atmel SDHCI controller support" + depends on ARCH_AT91 + depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 + depends on MMC_SDHCI + help + This enables support for the Atmel SDHCI controller, which supports + the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD + Memory Card Specification V3.0, and the SDIO V3.0 specification. + It is compliant with the SD Host Controller Standard V3.0 + specification. + config MMC_SDHCI_BCM2835 tristate "SDHCI support for the BCM2835 SD/MMC Controller" depends on ARCH_BCM283X diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index e63f4394d6..e78bd0d41d 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_GENERIC_MMC) += mmc_legacy.o endif obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o -obj-$(CONFIG_ATMEL_SDHCI) += atmel_sdhci.o obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o @@ -53,6 +52,7 @@ endif # SDHCI obj-$(CONFIG_MMC_SDHCI) += sdhci.o +obj-$(CONFIG_MMC_SDHCI_ATMEL) += atmel_sdhci.o obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o obj-$(CONFIG_MMC_SDHCI_KONA) += kona_sdhci.o