From: Paul Fertser Date: Wed, 11 Sep 2013 21:25:19 +0000 (+0200) Subject: configure: auto-enable USB adapters based on libusb availability X-Git-Tag: v0.8.0-rc1~265 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=dd6274deed65c47ba2ef46e14259167d393399d8;p=openocd configure: auto-enable USB adapters based on libusb availability This unifies the way the USB adapters are handled, and enables them automatically whenever possible (until explicitly disabled). If an adapter is explicitly enabled but can't be built, abort the configure. Also add infrastructure for generic handling of adapter drivers in configure and print a summary of the configuration results after finishing. The m4 quoting is as conservative as I could get it, and seems appropriate. Change-Id: I1655691e5ea0d8eb9e3f67830b96992ffe33640a Signed-off-by: Paul Fertser Signed-off-by: Andreas Fritiofson Reviewed-on: http://openocd.zylin.com/1475 Reviewed-by: Xiaofan Reviewed-by: Spencer Oliver Tested-by: Spencer Oliver --- diff --git a/configure.ac b/configure.ac index 7f49ba05..17cf43ed 100644 --- a/configure.ac +++ b/configure.ac @@ -181,6 +181,34 @@ __EOF__ AC_MSG_ERROR([Sorry Cannot continue]) ], [true]) +# Adapter drivers +# 1st column -- configure option +# 2nd column -- description +# 3rd column -- symbol used for both config.h and automake +m4_define([ADAPTER_ARG], [m4_argn([1], $1)]) +m4_define([ADAPTER_DESC], [m4_argn([2], $1)]) +m4_define([ADAPTER_SYM], [m4_argn([3], $1)]) +m4_define([ADAPTER_VAR], [enable_[]ADAPTER_ARG($1)]) +m4_define([ADAPTER_OPT], [m4_translit(ADAPTER_ARG($1), [_], [-])]) + +m4_define([USB1_ADAPTERS], + [[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]], + [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]], + [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]]]) + +m4_define([USB_ADAPTERS], + [[[jlink], [Segger J-Link JTAG Programmer], [JLINK]], + [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]], + [[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]], + [[aice], [Andes JTAG Programmer], [AICE]]]) + +m4_define([USB0_ADAPTERS], + [[[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]], + [[usbprog], [USBProg JTAG Programmer], [USBPROG]], + [[rlink], [Raisonance RLink JTAG Programmer], [RLINK]], + [[ulink], [Keil ULINK JTAG Programmer], [ULINK]], + [[armjtagew], [Olimex ARM-JTAG-EW Programmer], [ARMJTAGEW]]]) + #======================================== # FTD2XXX support comes in 4 forms. # (1) win32 - via a zip file @@ -330,6 +358,17 @@ AC_ARG_ENABLE([dummy], AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]), [build_dummy=$enableval], [build_dummy=no]) +m4_define([AC_ARG_ADAPTERS], [ + m4_foreach([adapter], [$1], + [AC_ARG_ENABLE(ADAPTER_OPT([adapter]), + AS_HELP_STRING([--enable-ADAPTER_OPT([adapter])], + [Enable building support for the ]ADAPTER_DESC([adapter])[ (default is $2)]), + [], [ADAPTER_VAR([adapter])=$2]) + ]) +]) + +AC_ARG_ADAPTERS([USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS], [auto]) + AC_ARG_ENABLE([parport], AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]), [build_parport=$enableval], [build_parport=no]) @@ -352,10 +391,6 @@ AC_ARG_ENABLE([ft2232_ftd2xx], AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]), [build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no]) -AC_ARG_ENABLE([ftdi], - AS_HELP_STRING([--enable-ftdi], [Enable building support for the MPSSE mode of FTDI based devices, using libusb-1.0 in asynchronous mode]), - [build_ftdi=$enableval], [build_ftdi=no]) - AC_ARG_ENABLE([jtag_vpi], AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]), [build_jtag_vpi=$enableval], [build_jtag_vpi=no]) @@ -418,10 +453,6 @@ AC_ARG_ENABLE([presto_ftd2xx], AS_HELP_STRING([--enable-presto_ftd2xx], [Enable building support for ASIX Presto Programmer using the FTD2XX driver]), [build_presto_ftd2xx=$enableval], [build_presto_ftd2xx=no]) -AC_ARG_ENABLE([usbprog], - AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]), - [build_usbprog=$enableval], [build_usbprog=no]) - AC_ARG_ENABLE([openjtag_ftd2xx], AS_HELP_STRING([--enable-openjtag_ftd2xx], [Enable building support for the OpenJTAG Programmer with ftd2xx driver]), [build_openjtag_ftd2xx=$enableval], [build_openjtag_ftd2xx=no]) @@ -435,46 +466,10 @@ AC_ARG_ENABLE([oocd_trace], [Enable building support for some prototype OpenOCD+trace ETM capture hardware]), [build_oocd_trace=$enableval], [build_oocd_trace=no]) -AC_ARG_ENABLE([jlink], - AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]), - [build_jlink=$enableval], [build_jlink=no]) - -AC_ARG_ENABLE([vsllink], - AS_HELP_STRING([--enable-vsllink], [Enable building support for the Versaloon-Link JTAG Programmer]), - [build_vsllink=$enableval], [build_vsllink=no]) - -AC_ARG_ENABLE([rlink], - AS_HELP_STRING([--enable-rlink], [Enable building support for the Raisonance RLink JTAG Programmer]), - [build_rlink=$enableval], [build_rlink=no]) - -AC_ARG_ENABLE([ulink], - AS_HELP_STRING([--enable-ulink], [Enable building support for the Keil ULINK JTAG Programmer]), - [build_ulink=$enableval], [build_ulink=no]) - -AC_ARG_ENABLE([arm-jtag-ew], - AS_HELP_STRING([--enable-arm-jtag-ew], [Enable building support for the Olimex ARM-JTAG-EW Programmer]), - [build_armjtagew=$enableval], [build_armjtagew=no]) - AC_ARG_ENABLE([buspirate], AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]), [build_buspirate=$enableval], [build_buspirate=no]) -AC_ARG_ENABLE([stlink], - AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]), - [build_hladapter_stlink=$enableval], [build_hladapter_stlink=no]) - -AC_ARG_ENABLE([ti-icdi], - AS_HELP_STRING([--enable-ti-icdi], [Enable building support for the TI ICDI JTAG Programmer]), - [build_hladapter_icdi=$enableval], [build_hladapter_icdi=no]) - -AC_ARG_ENABLE([osbdm], - AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]), - [build_osbdm=$enableval], [build_osbdm=no]) - -AC_ARG_ENABLE([opendous], - AS_HELP_STRING([--enable-opendous], [Enable building support for the estick/opendous JTAG Programmer]), - [build_opendous=$enableval], [build_opendous=no]) - AC_ARG_ENABLE([sysfsgpio], AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]), [build_sysfsgpio=$enableval], [build_sysfsgpio=no]) @@ -487,10 +482,6 @@ AC_ARG_ENABLE([internal-jimtcl], AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]), [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes]) -AC_ARG_ENABLE([aice], - AS_HELP_STRING([--enable-aice], [Enable building support for the Andes JTAG Programmer]), - [build_aice=$enableval], [build_aice=no]) - build_minidriver=no AC_MSG_CHECKING([whether to enable ZY1000 minidriver]) if test $build_zy1000 = yes; then @@ -685,12 +676,6 @@ else AC_DEFINE([BUILD_FT2232_FTD2XX], [0], [0 if you don't want ftd2xx ft2232.]) fi -if test $build_ftdi = yes; then - AC_DEFINE([BUILD_FTDI], [1], [1 if you want ftdi.]) -else - AC_DEFINE([BUILD_FTDI], [0], [0 if you don't want ftdi.]) -fi - if test $build_usb_blaster_libftdi = yes; then AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.]) else @@ -741,12 +726,6 @@ else AC_DEFINE([BUILD_BITQ], [0], [0 if you don't want a bitq interface.]) fi -if test $build_usbprog = yes; then - AC_DEFINE([BUILD_USBPROG], [1], [1 if you want the usbprog JTAG driver.]) -else - AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.]) -fi - AC_DEFINE([BUILD_OPENJTAG], [0], [0 if you don't want the OpenJTAG driver.]) AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [0], [0 if you don't want the OpenJTAG driver with FTD2XX driver.]) AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [0], [0 if you don't want to build OpenJTAG driver with libftdi.]) @@ -766,66 +745,12 @@ else AC_DEFINE([BUILD_OOCD_TRACE], [0], [0 if you don't want the OpenOCD+trace ETM capture driver.]) fi -if test $build_jlink = yes; then - AC_DEFINE([BUILD_JLINK], [1], [1 if you want the J-Link JTAG driver.]) -else - AC_DEFINE([BUILD_JLINK], [0], [0 if you don't want the J-Link JTAG driver.]) -fi - -if test $build_aice = yes; then - AC_DEFINE([BUILD_AICE], [1], [1 if you want the AICE JTAG driver.]) -else - AC_DEFINE([BUILD_AICE], [0], [0 if you don't want the AICE JTAG driver.]) -fi - -if test $build_vsllink = yes; then - AC_DEFINE([BUILD_VSLLINK], [1], [1 if you want the Versaloon-Link JTAG driver.]) -else - AC_DEFINE([BUILD_VSLLINK], [0], [0 if you don't want the Versaloon-Link JTAG driver.]) -fi - -if test $build_rlink = yes; then - AC_DEFINE([BUILD_RLINK], [1], [1 if you want the RLink JTAG driver.]) -else - AC_DEFINE([BUILD_RLINK], [0], [0 if you don't want the RLink JTAG driver.]) -fi - -if test $build_ulink = yes; then - AC_DEFINE([BUILD_ULINK], [1], [1 if you want the ULINK JTAG driver.]) -else - AC_DEFINE([BUILD_ULINK], [0], [0 if you don't want the ULINK JTAG driver.]) -fi - -if test $build_armjtagew = yes; then - AC_DEFINE([BUILD_ARMJTAGEW], [1], [1 if you want the ARM-JTAG-EW JTAG driver.]) -else - AC_DEFINE([BUILD_ARMJTAGEW], [0], [0 if you don't want the ARM-JTAG-EW JTAG driver.]) -fi - if test $build_buspirate = yes; then AC_DEFINE([BUILD_BUSPIRATE], [1], [1 if you want the Buspirate JTAG driver.]) else AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.]) fi -if test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes; then - AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.]) -else - AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the High Level JTAG driver.]) -fi - -if test $build_osbdm = yes; then - AC_DEFINE([BUILD_OSBDM], [1], [1 if you want the OSBDM driver.]) -else - AC_DEFINE([BUILD_OSBDM], [0], [0 if you don't want the OSBDM driver.]) -fi - -if test $build_opendous = yes; then - AC_DEFINE([BUILD_OPENDOUS], [1], [1 if you want the estick/opendous JTAG driver.]) -else - AC_DEFINE([BUILD_OPENDOUS], [0], [0 if you don't want the estick/opendous JTAG driver.]) -fi - if test "$use_internal_jimtcl" = yes; then if test -f "$srcdir/jimtcl/configure.ac"; then AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim]) @@ -1152,52 +1077,47 @@ enum ftdi_chip_type x = TYPE_232H; CFLAGS=$CFLAGS_SAVE fi -# check if some driver requires libusb-0.1 -need_usb0=no -if test $build_vsllink = yes -o $build_usbprog = yes -o \ - $build_rlink = yes -o $build_armjtagew = yes; then - need_usb0=yes -fi - -# check if some driver can work with either libusb version -need_usb=no -if test $build_jlink = yes -o $build_osbdm = yes -o $build_opendous = yes -o \ - $build_aice = yes; then - need_usb=yes -fi - -# check if some driver requires libusb-1.x -need_usb_ng=no -if test $build_ftdi = yes -o $build_hladapter_icdi = yes -o \ - $build_hladapter_stlink = yes -o $build_ulink = yes; then - need_usb_ng=yes -fi - -# check for libusb library if necessary -use_libusb1=no -if test $need_usb = yes -o $need_usb_ng = yes; then - PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [ +PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [ use_libusb1=yes AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x]) PKG_CHECK_EXISTS([libusb-1.0 >= 1.0.9], [AC_DEFINE([HAVE_LIBUSB_ERROR_NAME], [1], [Define if your libusb has libusb_error_name()])], [AC_MSG_WARN([libusb-1.x older than 1.0.9 detected, consider updating])]) ], [ - if test $need_usb_ng = yes; then - AC_MSG_ERROR([libusb-1.x is required for some driver(s) you've selected]) + use_libusb1=no + AC_MSG_WARN([libusb-1.x not found, trying legacy libusb-0.1 as a fallback; consider installing libusb-1.x instead]) +]) + +PKG_CHECK_MODULES([LIBUSB0], [libusb], [use_libusb0=yes], [use_libusb0=no]) + +m4_define([PROCESS_ADAPTERS], [ + m4_foreach([adapter], [$1], [ + if test $2; then + if test $ADAPTER_VAR([adapter]) != no; then + AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).) + else + AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [0], [0 if you do not want the ]ADAPTER_DESC([adapter]).) + fi else - AC_MSG_WARN([Trying legacy libusb-0.1 as a fallback, consider installing libusb-1 instead]) - need_usb0=yes + if test $ADAPTER_VAR([adapter]) = yes; then + AC_MSG_ERROR([$3 is required for the ADAPTER_DESC([adapter])]) + fi + ADAPTER_VAR([adapter])=no fi + AM_CONDITIONAL(ADAPTER_SYM([adapter]), [test $ADAPTER_VAR([adapter]) != no]) ]) -fi +]) -use_libusb0=no -if test $need_usb0 = yes; then - PKG_CHECK_MODULES([LIBUSB0], [libusb], [use_libusb0=yes], [ - AC_MSG_ERROR([libusb-0.1 is required to build some OpenOCD driver(s)]) - ]) +PROCESS_ADAPTERS([USB1_ADAPTERS], [$use_libusb1 = yes], [libusb-1.x]) +PROCESS_ADAPTERS([USB_ADAPTERS], [$use_libusb1 = yes -o $use_libusb0 = yes], [libusb-1.x or libusb-0.1]) +PROCESS_ADAPTERS([USB0_ADAPTERS], [$use_libusb0 = yes], [libusb-0.1]) + +if test $enable_stlink != no -o $enable_ti_icdi != no; then + AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.]) +else + AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you want the High Level JTAG driver.]) fi +AM_CONDITIONAL([HLADAPTER], [test $enable_stlink != no -o $enable_ti_icdi != no]) AM_CONDITIONAL([RELEASE], [test $build_release = yes]) AM_CONDITIONAL([PARPORT], [test $build_parport = yes]) @@ -1212,7 +1132,6 @@ AM_CONDITIONAL([BCM2835GPIO], [test $build_bcm2835gpio = yes]) AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes]) AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes]) AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes]) -AM_CONDITIONAL([FTDI_DRIVER], [test $build_ftdi = yes]) AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes]) AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes]) AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes]) @@ -1221,20 +1140,10 @@ AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes]) AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes]) AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes]) AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes]) -AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes]) AM_CONDITIONAL([OPENJTAG], [test $build_openjtag_ftd2xx = yes -o $build_openjtag_ftdi = yes]) AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes]) -AM_CONDITIONAL([JLINK], [test $build_jlink = yes]) -AM_CONDITIONAL([AICE], [test $build_aice = yes]) -AM_CONDITIONAL([VSLLINK], [test $build_vsllink = yes]) -AM_CONDITIONAL([RLINK], [test $build_rlink = yes]) -AM_CONDITIONAL([ULINK], [test $build_ulink = yes]) -AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes]) AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes]) AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes]) -AM_CONDITIONAL([HLADAPTER], [test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes]) -AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes]) -AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes]) AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes]) AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes]) AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes]) @@ -1362,3 +1271,23 @@ AC_CONFIG_FILES([ doc/Makefile ]) AC_OUTPUT + +echo +echo +echo OpenOCD configuration summary +echo -------------------------------------------------- +m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS], + [echo -n m4_format(["%-40s"], ADAPTER_DESC([adapter])) + case $ADAPTER_VAR([adapter]) in + auto) + echo yes '(auto)' + ;; + yes) + echo yes + ;; + no) + echo no + ;; + esac +]) +echo diff --git a/src/jtag/drivers/Makefile.am b/src/jtag/drivers/Makefile.am index e8f1efbc..00f0165e 100644 --- a/src/jtag/drivers/Makefile.am +++ b/src/jtag/drivers/Makefile.am @@ -41,7 +41,7 @@ endif if FT2232_DRIVER DRIVERFILES += ft2232.c endif -if FTDI_DRIVER +if FTDI DRIVERFILES += ftdi.c mpsse.c endif if JTAG_VPI