From: Michal Simek Date: Thu, 2 Nov 2017 09:54:48 +0000 (+0100) Subject: arm: zynq: Add mini u-boot configuration for zynq X-Git-Tag: v2018.01-rc1~59^2~75 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=dea4d2f01d3bcf5e7227a86610eec388e0186dba;p=u-boot arm: zynq: Add mini u-boot configuration for zynq Add configuration files/dtses for mini u-boot configurations which runs out of OCM. ram top is calculated from 0 that's why +#define CONFIG_SYS_SDRAM_BASE 0xfffc0000 +#define CONFIG_SYS_SDRAM_SIZE 0x40000 was hardcoded. Signed-off-by: Michal Simek Reviewed-by: Simon Glass --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index debf5e3b43..7517a5df5a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -126,6 +126,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-cc108.dtb \ + zynq-cse-qspi-single.dtb \ zynq-microzed.dtb \ zynq-picozed.dtb \ zynq-syzygy-hub.dtb \ diff --git a/arch/arm/dts/zynq-cse-qspi-single.dts b/arch/arm/dts/zynq-cse-qspi-single.dts new file mode 100644 index 0000000000..bc08303d7a --- /dev/null +++ b/arch/arm/dts/zynq-cse-qspi-single.dts @@ -0,0 +1,13 @@ +/* + * Xilinx CSE QSPI single DTS + * + * Copyright (C) 2015 - 2017 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "zynq-cse-qspi.dtsi" + +&qspi { + spi-rx-bus-width = <4>; +}; diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi new file mode 100644 index 0000000000..1c3736f1cd --- /dev/null +++ b/arch/arm/dts/zynq-cse-qspi.dtsi @@ -0,0 +1,126 @@ +/* + * Xilinx CSE QSPI board DTS + * + * Copyright (C) 2015 - 2017 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Zynq CSE QSPI Board"; + compatible = "xlnx,zynq-cse-qspi", "xlnx,zynq-7000"; + + aliases { + spi0 = &qspi; + serial0 = &dcc; + }; + + memory@fffc0000 { + device_type = "memory"; + reg = <0xFFFC0000 0x40000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dcc: dcc { + compatible = "arm,dcc"; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + + amba: amba { + u-boot,dm-pre-reloc; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + qspi: spi@e000d000 { + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 10>, <&clkc 43>; + compatible = "xlnx,zynq-qspi-1.0"; + status = "okay"; + interrupt-parent = <&intc>; + interrupts = <0 19 4>; + reg = <0xe000d000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + flash@0 { + compatible = "n25q128a11"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@qspi-fsbl-uboot { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + partition@qspi-bitstream { + label = "qspi-bitstream"; + reg = <0xC00000 0x400000>; + }; + }; + }; + + slcr: slcr@f8000000 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; + reg = <0xF8000000 0x1000>; + ranges; + clkc: clkc@100 { + #clock-cells = <1>; + compatible = "xlnx,ps7-clkc"; + fclk-enable = <0xf>; + u-boot,dm-pre-reloc; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + reg = <0x100 0x100>; + }; + }; + }; + +}; + +&dcc { + status = "okay"; +}; diff --git a/board/xilinx/zynq/zynq-cse-qspi-single b/board/xilinx/zynq/zynq-cse-qspi-single new file mode 120000 index 0000000000..764d141171 --- /dev/null +++ b/board/xilinx/zynq/zynq-cse-qspi-single @@ -0,0 +1 @@ +zynq-zc706 \ No newline at end of file diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig new file mode 100644 index 0000000000..86c5d4452e --- /dev/null +++ b/configs/zynq_cse_qspi_defconfig @@ -0,0 +1,62 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="zynq_cse" +CONFIG_ARCH_ZYNQ=y +CONFIG_SYS_TEXT_BASE=0xFFFC0000 +# CONFIG_ZYNQ_DDRC_INIT is not set +CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-qspi-single" +CONFIG_DEBUG_UART=y +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_BOOTDELAY=-1 +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL=y +CONFIG_SYS_PROMPT="Zynq> " +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_FDT is not set +# CONFIG_CMD_GO is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_SPL is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_CLK is not set +# CONFIG_CMD_DM is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set +# CONFIG_PARTITIONS is not set +CONFIG_OF_EMBED=y +# CONFIG_DM_WARN is not set +# CONFIG_DM_DEVICE_REMOVE is not set +CONFIG_SPL_DM_SEQ_ALIAS=y +# CONFIG_SPL_BLK is not set +# CONFIG_ZYNQ_GPIO is not set +# CONFIG_MMC is not set +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DEBUG_UART_ARM_DCC=y +CONFIG_DEBUG_UART_BASE=0x0 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_ZYNQ_QSPI=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h new file mode 100644 index 0000000000..dd65b52343 --- /dev/null +++ b/include/configs/zynq_cse.h @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2013 - 2017 Xilinx. + * + * Configuration settings for the Xilinx Zynq CSE board. + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_CSE_H +#define __CONFIG_ZYNQ_CSE_H + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_ICACHE_OFF + +#include + +/* Undef unneeded configs */ +#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_BOARD_LATE_INIT +#undef CONFIG_BOOTCOMMAND +#undef CONFIG_ENV_SIZE +#undef CONFIG_CMDLINE_EDITING +#undef CONFIG_AUTO_COMPLETE +#undef CONFIG_ZLIB +#undef CONFIG_GZIP + +#undef CONFIG_SYS_LONGHELP + +#undef CONFIG_SYS_CBSIZE +#undef CONFIG_BOOTM_VXWORKS +#undef CONFIG_BOOTM_LINUX + +#define CONFIG_SYS_CBSIZE 1024 + +#define CONFIG_ENV_SIZE 400 +#undef CONFIG_SYS_INIT_RAM_ADDR +#undef CONFIG_SYS_INIT_RAM_SIZE +#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFDE000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#undef CONFIG_SPL_BSS_START_ADDR +#undef CONFIG_SPL_BSS_MAX_SIZE +#define CONFIG_SPL_BSS_START_ADDR 0x20000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x8000 + +#undef CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_MALLOC_LEN 0x1000 + +#define CONFIG_SYS_SDRAM_BASE 0xfffc0000 +#define CONFIG_SYS_SDRAM_SIZE 0x40000 + +#endif /* __CONFIG_ZYNQ_CSE_H */