From: Michael Stapelberg Date: Fri, 11 May 2018 09:55:52 +0000 (+0200) Subject: add i3status v2.12 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e146553faeee68afefe761284504350d79547132;p=i3%2Fi3.github.io add i3status v2.12 --- diff --git a/_docs/i3status.man b/_docs/i3status.man index e9cc37d..4ed54ac 100644 --- a/_docs/i3status.man +++ b/_docs/i3status.man @@ -1,7 +1,7 @@ i3status(1) =========== Michael Stapelberg -v2.11, January 2017 +v2.12, May 2018 == NAME @@ -141,7 +141,7 @@ no effect when +output_format+ is set to +i3bar+ or +none+. The +interval+ directive specifies the time in seconds for which i3status will sleep before printing the next status line. -Using +output_format+ you can chose which format strings i3status should +Using +output_format+ you can choose which format strings i3status should use in its output. Currently available are: i3bar:: @@ -177,14 +177,14 @@ section just for this module. If you don't fancy the vertical separators between modules i3status/i3bar uses by default, you can employ the +separator+ directive to configure how -modules are separated. You can either disable the default separator altogether +modules are separated. You can also disable the default separator altogether by setting it to the empty string. You might then define separation as part of a module's format string. This is your only option when using the i3bar output format as the separator is drawn by i3bar directly otherwise. For the other output formats, the provided non-empty string will be automatically enclosed with the necessary coloring bits if color support is enabled. -i3bar supports Pango markup, allowing your format strings to specify font +i3bar supports Pango markup, allowing your format strings to specify font, color, size, etc. by setting the +markup+ directive to "pango". Note that the ampersand ("&"), less-than ("<"), greater-than (">"), single-quote ("'"), and double-quote (""") characters need to be replaced with "`&`", "`<`", @@ -299,20 +299,25 @@ network interface found on the system (excluding devices starting with "lo"). *Example order*: +wireless wlan0+ -*Example format*: +W: (%quality at %essid, %bitrate / %frequency) %ip+ +*Example format_up*: +W: (%quality at %essid, %bitrate / %frequency) %ip+ + +*Example format_down*: +W: down+ === Ethernet Gets the IP address and (if possible) the link speed of the given ethernet -interface. Getting the link speed requires the cap_net_admin capability. Set -it using +setcap cap_net_admin=ep $(which i3status)+. +interface. If no IPv4 address is available and an IPv6 address is, it will be +displayed. Getting the link speed requires the cap_net_admin capability. +Set it using +setcap cap_net_admin=ep $(which i3status)+. The special interface name `_first_` will be replaced by the first non-wireless network interface found on the system (excluding devices starting with "lo"). *Example order*: +ethernet eth0+ -*Example format*: +E: %ip (%speed)+ +*Example format_up*: +E: %ip (%speed)+ + +*Example format_down*: +E: down+ === Battery @@ -404,13 +409,16 @@ format_above_threshold. It is possible to define a degraded_threshold that will color the load value yellow in case the CPU average over the last interval is getting -higher than the configured threshold. Defaults to 90. The output format +higher than the configured threshold. Defaults to 90. The output format when above degraded threshold can be customized with format_above_degraded_threshold. +For displaying the Nth CPU usage, you can use the %cpu format string, +starting from %cpu0. This feature is currently not supported in FreeBSD. + *Example order*: +cpu_usage+ -*Example format*: +%usage+ +*Example format*: +all: %usage CPU_0: %cpu0 CPU_1: %cpu1+ *Example max_threshold*: +75+ diff --git a/i3status/i3status-2.12.tar.bz2 b/i3status/i3status-2.12.tar.bz2 new file mode 100644 index 0000000..207d5e7 Binary files /dev/null and b/i3status/i3status-2.12.tar.bz2 differ diff --git a/i3status/i3status-2.12.tar.bz2.asc b/i3status/i3status-2.12.tar.bz2.asc new file mode 100644 index 0000000..33bf215 --- /dev/null +++ b/i3status/i3status-2.12.tar.bz2.asc @@ -0,0 +1,16 @@ +-----BEGIN PGP SIGNATURE----- + +iQIzBAABCgAdFiEEQk4U1wPnxtQ9nW82TnFg7UrI7h0FAlr1YYMACgkQTnFg7UrI +7h0rxQ/7BQG8i8FI4qj//E9+8EAlml+K/hEDSxYKTFbrnCoHYc5l4arg/rxitVkU +W3Y9mGdi5QoaeUs3WUqb8HPqq+g3M0Dungi2MsL3gac9suAu1s3QVdmfKVIoYceS +CtHQ9DDkb6IMpQFuoWtq0pvVJ2JWfDu+t3AdC02cuU/Oaf3UKPMuBVp0roslbRk5 +LRroD04eys38DURnJ4qq/rXDwGiZWu7gCrf2cb0ZA7nuK+EtnIapcfQnku+EpLDY +6801Sm3HynAMODehYejRZWpM4RG2QMckogWAUcuzKnItyf+6HXylrnXnQ5ao2iPd +ebtELOpFAWo3auQXtlF8eDpkkmuBOMbOMZn/riwQZF3ZtLAJ9JlTVadqM3dl6dJ/ +ph/Mbc+ZWtT+hnlFC4thKOCDM5tnkBvCqBPdKxzEUMj0y6Zfhz57uZqXg9xwyXjf +MQLNkrIC3IVHuXDy11Bh3LnBO+pcyrs4ma71obSpHsXzAKhiOmr7g9lhQgOiVAK1 +i9Y5jWf7KbzAE98iXc894BBVwda8fMm//iOUj2pGSud392N3UUToH1y1f4nLr0HC +CdmxQyk+3j3f49I5LBhkOHd6HgwEcE9ilRDU3XxOT/uoZKwrC5VW+A1oqQh2+WM8 +f7v8GhUA4FdVu5nyRahBeFPn22MACFb0cJ66LEf3zsCzdV4TNc4= +=OCmC +-----END PGP SIGNATURE----- diff --git a/i3status/index.html b/i3status/index.html index 424c800..ba34f15 100644 --- a/i3status/index.html +++ b/i3status/index.html @@ -18,6 +18,9 @@ title: i3status

Releases

    +
  • i3status-2.12.tar.bz2 + (GPG signature, 2018-05-11)
    • +
  • i3status-2.11.tar.bz2 (GPG signature, 2017-01-21)
    • diff --git a/i3status/manpage.html b/i3status/manpage.html index 88c009a..cf6c9fa 100644 --- a/i3status/manpage.html +++ b/i3status/manpage.html @@ -4,7 +4,7 @@ - + i3: i3status(1) @@ -32,8 +32,8 @@ document.addEventListener("DOMContentLoaded", function(){asciidoc.footnotes(); a

    i3status(1)

    Michael Stapelberg
    <michael@i3wm.org>
    -version 2.11, -January 2017 +version 2.12, +May 2018
    Table of Contents
    @@ -92,13 +92,12 @@ configuration files in the following order:

    4. DESCRIPTION

    -

    i3status is a small program for generating a status bar for -i3bar, dzen2, xmobar, lemonbar or similar programs. It is designed to be very -efficient by issuing a very small number of system calls, as one generally -wants to update such a status line every second. This ensures that even under -high load, your status bar is updated correctly. Also, it saves a bit of energy -by not hogging your CPU as much as spawning the corresponding amount of shell -commands would.

    +

    i3status is a small program for generating a status bar for i3bar, dzen2, +xmobar, lemonbar or similar programs. It is designed to be very efficient by +issuing a very small number of system calls, as one generally wants to update +such a status line every second. This ensures that even under high load, your +status bar is updated correctly. Also, it saves a bit of energy by not hogging +your CPU as much as spawning the corresponding amount of shell commands would.

    @@ -208,7 +207,7 @@ color, even when colors are disabled by the colors directive. This opti no effect when output_format is set to i3bar or none.

    The interval directive specifies the time in seconds for which i3status will sleep before printing the next status line.

    -

    Using output_format you can chose which format strings i3status should +

    Using output_format you can choose which format strings i3status should use in its output. Currently available are:

    @@ -279,13 +278,13 @@ in a module section its value will override the value defined in the general section just for this module.

    If you don’t fancy the vertical separators between modules i3status/i3bar uses by default, you can employ the separator directive to configure how -modules are separated. You can either disable the default separator altogether +modules are separated. You can also disable the default separator altogether by setting it to the empty string. You might then define separation as part of a module’s format string. This is your only option when using the i3bar output format as the separator is drawn by i3bar directly otherwise. For the other output formats, the provided non-empty string will be automatically enclosed with the necessary coloring bits if color support is enabled.

    -

    i3bar supports Pango markup, allowing your format strings to specify font +

    i3bar supports Pango markup, allowing your format strings to specify font, color, size, etc. by setting the markup directive to "pango". Note that the ampersand ("&"), less-than ("<"), greater-than (">"), single-quote ("'"), and double-quote (""") characters need to be replaced with "&amp;", "&lt;", @@ -399,17 +398,20 @@ connected or not connected.

    The special interface name _first_ will be replaced by the first wireless network interface found on the system (excluding devices starting with "lo").

    Example order: wireless wlan0

    -

    Example format: W: (%quality at %essid, %bitrate / %frequency) %ip

    +

    Example format_up: W: (%quality at %essid, %bitrate / %frequency) %ip

    +

    Example format_down: W: down

    5.7. Ethernet

    Gets the IP address and (if possible) the link speed of the given ethernet -interface. Getting the link speed requires the cap_net_admin capability. Set -it using setcap cap_net_admin=ep $(which i3status).

    +interface. If no IPv4 address is available and an IPv6 address is, it will be +displayed. Getting the link speed requires the cap_net_admin capability. +Set it using setcap cap_net_admin=ep $(which i3status).

    The special interface name _first_ will be replaced by the first non-wireless network interface found on the system (excluding devices starting with "lo").

    Example order: ethernet eth0

    -

    Example format: E: %ip (%speed)

    +

    Example format_up: E: %ip (%speed)

    +

    Example format_down: E: down

    5.8. Battery

    @@ -477,11 +479,13 @@ format when above max_threshold can be customized with format_above_threshold.

    It is possible to define a degraded_threshold that will color the load value yellow in case the CPU average over the last interval is getting -higher than the configured threshold. Defaults to 90. The output format +higher than the configured threshold. Defaults to 90. The output format when above degraded threshold can be customized with format_above_degraded_threshold.

    +

    For displaying the Nth CPU usage, you can use the %cpu<N> format string, +starting from %cpu0. This feature is currently not supported in FreeBSD.

    Example order: cpu_usage

    -

    Example format: %usage

    +

    Example format: all: %usage CPU_0: %cpu0 CPU_1: %cpu1

    Example max_threshold: 75

    Example format_above_threshold: Warning above threshold: %usage

    Example degraded_threshold: 25