From: Thierry Reding <thierry.reding@avionic-design.de>
Date: Fri, 23 Nov 2012 00:58:51 +0000 (+0000)
Subject: tegra: Enable LCD on TEC
X-Git-Tag: v2013.04-rc1~48^2~53
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e1abca51b7f479828ae651d9bb54966b7fd6784a;p=u-boot

tegra: Enable LCD on TEC

The TEC ships with a 7" LCD panel that provides a resolution of 800x480
pixels. Add a corresponding panel description to the device tree and
enable LCD support in the configuration.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
---

diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts
index 50ea3b51e4..cdb752776c 100644
--- a/board/avionic-design/dts/tegra20-tec.dts
+++ b/board/avionic-design/dts/tegra20-tec.dts
@@ -24,6 +24,19 @@
 		};
 	};
 
+	host1x {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
 	clock@60006000 {
 		clocks = <&clk_32k &osc>;
 	};
@@ -66,4 +79,23 @@
 			compatible = "hynix,hy27uf4g2b", "nand-flash";
 		};
 	};
+
+	lcd_panel: panel {
+		clock = <33260000>;
+		xres = <800>;
+		yres = <480>;
+		left-margin = <120>;
+		right-margin = <120>;
+		hsync-len = <16>;
+		lower-margin = <15>;
+		upper-margin = <15>;
+		vsync-len = <15>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+		nvidia,panel-timings = <0 0 0 0>;
+	};
 };
diff --git a/include/configs/tec.h b/include/configs/tec.h
index 200cf66647..815afa64a5 100644
--- a/include/configs/tec.h
+++ b/include/configs/tec.h
@@ -36,13 +36,13 @@
 /* High-level configuration options */
 #define V_PROMPT			"Tegra20 (TEC) # "
 #define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Tamonten Evaluation Carrier"
-#define CONFIG_SYS_BOARD_ODMDATA	0x2b0d8011
 
 /* Board-specific serial config */
 #define CONFIG_TEGRA_ENABLE_UARTD	/* UARTD: debug UART */
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 
 /* SD/MMC */
 #define CONFIG_MMC
@@ -85,6 +85,19 @@
 	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
 	"bootm"
 
+#undef TEGRA_DEVICE_SETTINGS
+#define TEGRA_DEVICE_SETTINGS	\
+	"stdin=serial\0"	\
+	"stdout=serial,lcd\0"	\
+	"stderr=serial,lcd\0"
+
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */