From: Holger Brunck Date: Fri, 13 Nov 2015 14:01:16 +0000 (+0100) Subject: arm/mgcoge3un: check dip_switch at startup X-Git-Tag: v2016.01-rc2~269 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e23fde7d1f54b9fb2661a895b08f4a74c5a2459a;p=u-boot arm/mgcoge3un: check dip_switch at startup Similar to kmcoge5un we need to check the dip switch at startup connected to the kirkwood at MPP43. If it's set we need to set the actual_bank to zero to boot from SW bank zero. Additional to kmcoge5un we need to check also the pin in misc_init to decide wether we wait for the ne to start or not. If the dip_switch is set we don't wait and continue immediately. Signed-off-by: Holger Brunck Signed-off-by: Valentin Longchamp --- diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 64cf2ed635..f54f14ecff 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -55,6 +55,9 @@ DECLARE_GLOBAL_DATA_PTR; #define PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT (0x3<<4) #define PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK (0x0<<8) +/* I/O pin to erase flash RGPP09 = MPP43 */ +#define KM_FLASH_ERASE_ENABLE 43 + /* Multi-Purpose Pins Functionality configuration */ static const u32 kwmpp_config[] = { MPP0_NF_IO2, @@ -201,8 +204,10 @@ int misc_init_r(void) { #if defined(CONFIG_KM_MGCOGE3UN) char *wait_for_ne; + u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE); wait_for_ne = getenv("waitforne"); - if (wait_for_ne != NULL) { + + if ((wait_for_ne != NULL) && (dip_switch == 0)) { if (strcmp(wait_for_ne, "true") == 0) { int cnt = 0; int abort = 0; @@ -291,9 +296,7 @@ int board_init(void) int board_late_init(void) { -#if defined(CONFIG_KMCOGE5UN) -/* I/O pin to erase flash RGPP09 = MPP43 */ -#define KM_FLASH_ERASE_ENABLE 43 +#if (defined(CONFIG_KMCOGE5UN) | defined(CONFIG_KM_MGCOGE3UN)) u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE); /* if pin 1 do full erase */