From: Chuen Chou Date: Sun, 2 Sep 2012 07:45:15 +0000 (-0700) Subject: flash: fix sam3 page read/write address computation error X-Git-Tag: v0.6.0~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e26ddb627ba035ab9bfc9c54a5585865a6c89132;p=openocd flash: fix sam3 page read/write address computation error In at91sam3.c for Atmel SAM3 flash support, there are arithmetic errors in the functions sam3_page_read() and sam3_page_write(). Address locations are computed incorrectly due to an extra addition operation. This leads to memory locations being skipped during flash writes and reads. Smaller programs are written successfully into flash, with memory gaps, while larger programs of legitimate size fail because the skipped memory is not utilized and therefore unavailable. The changes address this condition, and have been tested with an Atmel SAM3X-EK evaluation board. Change-Id: I9ea3b9ed0130b71cbc32b2294e31a6a2bc71b47a Signed-off-by: Chuen Chou Reviewed-on: http://openocd.zylin.com/806 Tested-by: jenkins Reviewed-by: Freddie Chopin --- diff --git a/src/flash/nor/at91sam3.c b/src/flash/nor/at91sam3.c index 7dbfa24c..de792ece 100644 --- a/src/flash/nor/at91sam3.c +++ b/src/flash/nor/at91sam3.c @@ -3018,7 +3018,7 @@ static int sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum, int r; adr = pagenum * pPrivate->page_size; - adr += adr + pPrivate->base_address; + adr += pPrivate->base_address; r = target_read_memory(pPrivate->pChip->target, adr, @@ -3126,7 +3126,7 @@ static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, int r; adr = pagenum * pPrivate->page_size; - adr += (adr + pPrivate->base_address); + adr += pPrivate->base_address; /* Get flash mode register value */ r = target_read_u32(pPrivate->pChip->target, pPrivate->controller_address, &fmr);