From: Steve Sakoman Date: Mon, 20 Sep 2010 16:55:24 +0000 (-0700) Subject: ARMV7: OMAP3: Update Beagle xM pinmux with USB hub and DVI gpio setup X-Git-Tag: v2010.09~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e299e3f7a3796fd7051efea8177e85b794a99d7c;p=u-boot ARMV7: OMAP3: Update Beagle xM pinmux with USB hub and DVI gpio setup This patch adds missing pinmux setup for 4 GPIO signals used on the Beagle xM: - USB hub reset (gpio_56) - P8 USB hub reset (gpio_63) - DVI enable (gpio_129) - P8 DVI enable (gpio_170) Signed-off-by: Steve Sakoman Signed-off-by: Sandeep Paulraj --- diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index d86033772b..ec0da6d745 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -386,6 +386,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ #define MUX_BEAGLE_XM() \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\ + MUX_VAL(CP(GPMC_WAIT0), (IDIS | PTU | EN | M4)) /*GPIO_63*/\ + MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\