From: Nikita Kiryanov Date: Sun, 7 Sep 2014 15:59:29 +0000 (+0300) Subject: arm: mx6: add support for Compulab cm-fx6 CoM X-Git-Tag: v2014.10-rc3~79^2^2~25 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e32028a70ba2be17732b21f98b242d9fe3d977cf;p=u-boot arm: mx6: add support for Compulab cm-fx6 CoM Add initial support for Compulab CM-FX6 CoM. Support includes MMC, SPI flash, and SPL with dynamic DRAM detection. Cc: Igor Grinberg Cc: Stefano Babic Cc: Tom Rini Cc: Marek Vasut Cc: Simon Glass Acked-by: Marek Vasut Signed-off-by: Nikita Kiryanov --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 22f0f09af6..f933123395 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -424,6 +424,9 @@ config OMAP54XX config RMOBILE bool "Renesas ARM SoCs" +config TARGET_CM_FX6 + bool "Support cm_fx6" + config TARGET_S5P_GONI bool "Support s5p_goni" @@ -579,6 +582,7 @@ source "board/cirrus/edb93xx/Kconfig" source "board/cm4008/Kconfig" source "board/cm41xx/Kconfig" source "board/compulab/cm_t335/Kconfig" +source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/creative/xfi3/Kconfig" source "board/davedenx/qong/Kconfig" diff --git a/board/compulab/cm_fx6/Kconfig b/board/compulab/cm_fx6/Kconfig new file mode 100644 index 0000000000..42a84380f2 --- /dev/null +++ b/board/compulab/cm_fx6/Kconfig @@ -0,0 +1,23 @@ +if TARGET_CM_FX6 + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "cm_fx6" + +config SYS_VENDOR + string + default "compulab" + +config SYS_SOC + string + default "mx6" + +config SYS_CONFIG_NAME + string + default "cm_fx6" + +endif diff --git a/board/compulab/cm_fx6/MAINTAINERS b/board/compulab/cm_fx6/MAINTAINERS new file mode 100644 index 0000000000..5b2623a664 --- /dev/null +++ b/board/compulab/cm_fx6/MAINTAINERS @@ -0,0 +1,6 @@ +CM_FX6 BOARD +M: Nikita Kiryanov +S: Maintained +F: board/compulab/cm_fx6/ +F: include/configs/cm_fx6.h +F: configs/cm_fx6_defconfig diff --git a/board/compulab/cm_fx6/Makefile b/board/compulab/cm_fx6/Makefile new file mode 100644 index 0000000000..3e5c9034df --- /dev/null +++ b/board/compulab/cm_fx6/Makefile @@ -0,0 +1,12 @@ +# +# (C) Copyright 2014 CompuLab, Ltd. +# +# Authors: Nikita Kiryanov +# +# SPDX-License-Identifier: GPL-2.0+ +# +ifdef CONFIG_SPL_BUILD +obj-y = common.o spl.o +else +obj-y = common.o cm_fx6.o +endif diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c new file mode 100644 index 0000000000..b5895816cb --- /dev/null +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -0,0 +1,111 @@ +/* + * Board functions for Compulab CM-FX6 board + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include "common.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_FSL_ESDHC +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR}, + {USDHC2_BASE_ADDR}, + {USDHC3_BASE_ADDR}, +}; + +static enum mxc_clock usdhc_clk[3] = { + MXC_ESDHC_CLK, + MXC_ESDHC2_CLK, + MXC_ESDHC3_CLK, +}; + +int board_mmc_init(bd_t *bis) +{ + int i; + + cm_fx6_set_usdhc_iomux(); + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + usdhc_cfg[i].sdhc_clk = mxc_get_clock(usdhc_clk[i]); + usdhc_cfg[i].max_bus_width = 4; + fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + enable_usdhc_clk(1, i); + } + + return 0; +} +#endif + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + return 0; +} + +int checkboard(void) +{ + puts("Board: CM-FX6\n"); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + + switch (gd->ram_size) { + case 0x10000000: /* DDR_16BIT_256MB */ + gd->bd->bi_dram[0].size = 0x10000000; + gd->bd->bi_dram[1].size = 0; + break; + case 0x20000000: /* DDR_32BIT_512MB */ + gd->bd->bi_dram[0].size = 0x20000000; + gd->bd->bi_dram[1].size = 0; + break; + case 0x40000000: + if (is_cpu_type(MXC_CPU_MX6SOLO)) { /* DDR_32BIT_1GB */ + gd->bd->bi_dram[0].size = 0x20000000; + gd->bd->bi_dram[1].size = 0x20000000; + } else { /* DDR_64BIT_1GB */ + gd->bd->bi_dram[0].size = 0x40000000; + gd->bd->bi_dram[1].size = 0; + } + break; + case 0x80000000: /* DDR_64BIT_2GB */ + gd->bd->bi_dram[0].size = 0x40000000; + gd->bd->bi_dram[1].size = 0x40000000; + break; + case 0xEFF00000: /* DDR_64BIT_4GB */ + gd->bd->bi_dram[0].size = 0x70000000; + gd->bd->bi_dram[1].size = 0x7FF00000; + break; + } +} + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + switch (gd->ram_size) { + case 0x10000000: + case 0x20000000: + case 0x40000000: + case 0x80000000: + break; + case 0xF0000000: + gd->ram_size -= 0x100000; + break; + default: + printf("ERROR: Unsupported DRAM size 0x%lx\n", gd->ram_size); + return -1; + } + + return 0; +} diff --git a/board/compulab/cm_fx6/common.c b/board/compulab/cm_fx6/common.c new file mode 100644 index 0000000000..1f3967995f --- /dev/null +++ b/board/compulab/cm_fx6/common.c @@ -0,0 +1,84 @@ +/* + * Code used by both U-Boot and SPL for Compulab CM-FX6 + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include "common.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_FSL_ESDHC +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const usdhc_pads[] = { + IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + + IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + + IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), +}; + +void cm_fx6_set_usdhc_iomux(void) +{ + SETUP_IOMUX_PADS(usdhc_pads); +} + +/* CINS bit doesn't work, so always try to access the MMC card */ +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; +} +#endif + +#ifdef CONFIG_MXC_SPI +#define ECSPI_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_MED | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +static iomux_v3_cfg_t const ecspi_pads[] = { + IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(ECSPI_PAD_CTRL)), +}; + +void cm_fx6_set_ecspi_iomux(void) +{ + SETUP_IOMUX_PADS(ecspi_pads); +} + +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (CM_FX6_ECSPI_BUS0_CS0) : -1; +} +#endif diff --git a/board/compulab/cm_fx6/common.h b/board/compulab/cm_fx6/common.h new file mode 100644 index 0000000000..347d07b0b9 --- /dev/null +++ b/board/compulab/cm_fx6/common.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define CM_FX6_ECSPI_BUS0_CS0 IMX_GPIO_NR(2, 30) +#define CM_FX6_GREEN_LED IMX_GPIO_NR(2, 31) + +void cm_fx6_set_usdhc_iomux(void); +void cm_fx6_set_ecspi_iomux(void); diff --git a/board/compulab/cm_fx6/imximage.cfg b/board/compulab/cm_fx6/imximage.cfg new file mode 100644 index 0000000000..420947e9ca --- /dev/null +++ b/board/compulab/cm_fx6/imximage.cfg @@ -0,0 +1,8 @@ +/* + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +IMAGE_VERSION 2 +BOOT_FROM sd diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c new file mode 100644 index 0000000000..a3abc7b3f3 --- /dev/null +++ b/board/compulab/cm_fx6/spl.c @@ -0,0 +1,355 @@ +/* + * SPL specific code for Compulab CM-FX6 board + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +DECLARE_GLOBAL_DATA_PTR; + +enum ddr_config { + DDR_16BIT_256MB, + DDR_32BIT_512MB, + DDR_32BIT_1GB, + DDR_64BIT_1GB, + DDR_64BIT_2GB, + DDR_64BIT_4GB, + DDR_UNKNOWN, +}; + +/* + * Below DRAM_RESET[DDR_SEL] = 0 which is incorrect according to + * Freescale QRM, but this is exactly the value used by the automatic + * calibration script and it works also in all our tests, so we leave + * it as is at this point. + */ +#define CM_FX6_DDR_IOMUX_CFG \ + .dram_sdqs0 = 0x00000038, \ + .dram_sdqs1 = 0x00000038, \ + .dram_sdqs2 = 0x00000038, \ + .dram_sdqs3 = 0x00000038, \ + .dram_sdqs4 = 0x00000038, \ + .dram_sdqs5 = 0x00000038, \ + .dram_sdqs6 = 0x00000038, \ + .dram_sdqs7 = 0x00000038, \ + .dram_dqm0 = 0x00000038, \ + .dram_dqm1 = 0x00000038, \ + .dram_dqm2 = 0x00000038, \ + .dram_dqm3 = 0x00000038, \ + .dram_dqm4 = 0x00000038, \ + .dram_dqm5 = 0x00000038, \ + .dram_dqm6 = 0x00000038, \ + .dram_dqm7 = 0x00000038, \ + .dram_cas = 0x00000038, \ + .dram_ras = 0x00000038, \ + .dram_sdclk_0 = 0x00000038, \ + .dram_sdclk_1 = 0x00000038, \ + .dram_sdcke0 = 0x00003000, \ + .dram_sdcke1 = 0x00003000, \ + .dram_reset = 0x00000038, \ + .dram_sdba2 = 0x00000000, \ + .dram_sdodt0 = 0x00000038, \ + .dram_sdodt1 = 0x00000038, + +#define CM_FX6_GPR_IOMUX_CFG \ + .grp_b0ds = 0x00000038, \ + .grp_b1ds = 0x00000038, \ + .grp_b2ds = 0x00000038, \ + .grp_b3ds = 0x00000038, \ + .grp_b4ds = 0x00000038, \ + .grp_b5ds = 0x00000038, \ + .grp_b6ds = 0x00000038, \ + .grp_b7ds = 0x00000038, \ + .grp_addds = 0x00000038, \ + .grp_ddrmode_ctl = 0x00020000, \ + .grp_ddrpke = 0x00000000, \ + .grp_ddrmode = 0x00020000, \ + .grp_ctlds = 0x00000038, \ + .grp_ddr_type = 0x000C0000, + +static struct mx6sdl_iomux_ddr_regs ddr_iomux_s = { CM_FX6_DDR_IOMUX_CFG }; +static struct mx6sdl_iomux_grp_regs grp_iomux_s = { CM_FX6_GPR_IOMUX_CFG }; +static struct mx6dq_iomux_ddr_regs ddr_iomux_q = { CM_FX6_DDR_IOMUX_CFG }; +static struct mx6dq_iomux_grp_regs grp_iomux_q = { CM_FX6_GPR_IOMUX_CFG }; + +static struct mx6_mmdc_calibration cm_fx6_calib_s = { + .p0_mpwldectrl0 = 0x005B0061, + .p0_mpwldectrl1 = 0x004F0055, + .p0_mpdgctrl0 = 0x0314030C, + .p0_mpdgctrl1 = 0x025C0268, + .p0_mprddlctl = 0x42464646, + .p0_mpwrdlctl = 0x36322C34, +}; + +static struct mx6_ddr_sysinfo cm_fx6_sysinfo_s = { + .cs1_mirror = 1, + .cs_density = 16, + .bi_on = 1, + .rtt_nom = 1, + .rtt_wr = 0, + .ralat = 5, + .walat = 1, + .mif3_mode = 3, + .rst_to_cke = 0x23, + .sde_to_rst = 0x10, +}; + +static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_s = { + .mem_speed = 800, + .density = 4, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1800, + .trcmin = 5200, + .trasmin = 3600, + .SRT = 0, +}; + +static void spl_mx6s_dram_init(enum ddr_config dram_config, bool reset) +{ + if (reset) + ((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2; + + switch (dram_config) { + case DDR_16BIT_256MB: + cm_fx6_sysinfo_s.dsize = 0; + cm_fx6_sysinfo_s.ncs = 1; + break; + case DDR_32BIT_512MB: + cm_fx6_sysinfo_s.dsize = 1; + cm_fx6_sysinfo_s.ncs = 1; + break; + case DDR_32BIT_1GB: + cm_fx6_sysinfo_s.dsize = 1; + cm_fx6_sysinfo_s.ncs = 2; + break; + default: + puts("Tried to setup invalid DDR configuration\n"); + hang(); + } + + mx6_dram_cfg(&cm_fx6_sysinfo_s, &cm_fx6_calib_s, &cm_fx6_ddr3_cfg_s); + udelay(100); +} + +static struct mx6_mmdc_calibration cm_fx6_calib_q = { + .p0_mpwldectrl0 = 0x00630068, + .p0_mpwldectrl1 = 0x0068005D, + .p0_mpdgctrl0 = 0x04140428, + .p0_mpdgctrl1 = 0x037C037C, + .p0_mprddlctl = 0x3C30303A, + .p0_mpwrdlctl = 0x3A344038, + .p1_mpwldectrl0 = 0x0035004C, + .p1_mpwldectrl1 = 0x00170026, + .p1_mpdgctrl0 = 0x0374037C, + .p1_mpdgctrl1 = 0x0350032C, + .p1_mprddlctl = 0x30322A3C, + .p1_mpwrdlctl = 0x48304A3E, +}; + +static struct mx6_ddr_sysinfo cm_fx6_sysinfo_q = { + .cs_density = 16, + .cs1_mirror = 1, + .bi_on = 1, + .rtt_nom = 1, + .rtt_wr = 0, + .ralat = 5, + .walat = 1, + .mif3_mode = 3, + .rst_to_cke = 0x23, + .sde_to_rst = 0x10, +}; + +static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_q = { + .mem_speed = 1066, + .density = 4, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1324, + .trcmin = 59500, + .trasmin = 9750, + .SRT = 0, +}; + +static void spl_mx6q_dram_init(enum ddr_config dram_config, bool reset) +{ + if (reset) + ((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2; + + cm_fx6_ddr3_cfg_q.rowaddr = 14; + switch (dram_config) { + case DDR_16BIT_256MB: + cm_fx6_sysinfo_q.dsize = 0; + cm_fx6_sysinfo_q.ncs = 1; + break; + case DDR_32BIT_512MB: + cm_fx6_sysinfo_q.dsize = 1; + cm_fx6_sysinfo_q.ncs = 1; + break; + case DDR_64BIT_1GB: + cm_fx6_sysinfo_q.dsize = 2; + cm_fx6_sysinfo_q.ncs = 1; + break; + case DDR_64BIT_2GB: + cm_fx6_sysinfo_q.dsize = 2; + cm_fx6_sysinfo_q.ncs = 2; + break; + case DDR_64BIT_4GB: + cm_fx6_sysinfo_q.dsize = 2; + cm_fx6_sysinfo_q.ncs = 2; + cm_fx6_ddr3_cfg_q.rowaddr = 15; + break; + default: + puts("Tried to setup invalid DDR configuration\n"); + hang(); + } + + mx6_dram_cfg(&cm_fx6_sysinfo_q, &cm_fx6_calib_q, &cm_fx6_ddr3_cfg_q); + udelay(100); +} + +static int cm_fx6_spl_dram_init(void) +{ + unsigned long bank1_size, bank2_size; + + switch (get_cpu_type()) { + case MXC_CPU_MX6SOLO: + mx6sdl_dram_iocfg(64, &ddr_iomux_s, &grp_iomux_s); + + spl_mx6s_dram_init(DDR_32BIT_1GB, false); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x40000000) + return 0; + + if (bank1_size == 0x20000000) { + spl_mx6s_dram_init(DDR_32BIT_512MB, true); + return 0; + } + + spl_mx6s_dram_init(DDR_16BIT_256MB, true); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x10000000) + return 0; + + break; + case MXC_CPU_MX6D: + case MXC_CPU_MX6Q: + mx6dq_dram_iocfg(64, &ddr_iomux_q, &grp_iomux_q); + + spl_mx6q_dram_init(DDR_64BIT_4GB, false); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x80000000) + return 0; + + if (bank1_size == 0x40000000) { + bank2_size = get_ram_size((long int *)PHYS_SDRAM_2, + 0x80000000); + if (bank2_size == 0x40000000) { + /* Don't do a full reset here */ + spl_mx6q_dram_init(DDR_64BIT_2GB, false); + } else { + spl_mx6q_dram_init(DDR_64BIT_1GB, true); + } + + return 0; + } + + spl_mx6q_dram_init(DDR_32BIT_512MB, true); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x20000000) + return 0; + + spl_mx6q_dram_init(DDR_16BIT_256MB, true); + bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); + if (bank1_size == 0x10000000) + return 0; + + break; + } + + return -1; +} + +static iomux_v3_cfg_t const uart4_pads[] = { + IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + +static void cm_fx6_setup_uart(void) +{ + SETUP_IOMUX_PADS(uart4_pads); + enable_uart_clk(1); +} + +#ifdef CONFIG_SPL_SPI_SUPPORT +static void cm_fx6_setup_ecspi(void) +{ + cm_fx6_set_ecspi_iomux(); + enable_cspi_clock(1, 0); +} +#else +static void cm_fx6_setup_ecspi(void) { } +#endif + +void board_init_f(ulong dummy) +{ + gd = &gdata; + arch_cpu_init(); + timer_init(); + cm_fx6_setup_ecspi(); + cm_fx6_setup_uart(); + get_clocks(); + preloader_console_init(); + gpio_direction_output(CM_FX6_GREEN_LED, 1); + if (cm_fx6_spl_dram_init()) { + puts("!!!ERROR!!! DRAM detection failed!!!\n"); + hang(); + } + + memset(__bss_start, 0, __bss_end - __bss_start); + board_init_r(NULL, 0); +} + +void spl_board_init(void) +{ + u32 boot_device = spl_boot_device(); + + if (boot_device == BOOT_DEVICE_SPI) + puts("Booting from SPI flash\n"); + else if (boot_device == BOOT_DEVICE_MMC1) + puts("Booting from MMC\n"); + else + puts("Unknown boot device\n"); +} + +#ifdef CONFIG_SPL_MMC_SUPPORT +static struct fsl_esdhc_cfg usdhc_cfg = { + .esdhc_base = USDHC3_BASE_ADDR, + .max_bus_width = 4, +}; + +int board_mmc_init(bd_t *bis) +{ + cm_fx6_set_usdhc_iomux(); + + usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + + return fsl_esdhc_initialize(bis, &usdhc_cfg); +} +#endif diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig new file mode 100644 index 0000000000..50c06f7feb --- /dev/null +++ b/configs/cm_fx6_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/compulab/cm_fx6/imximage.cfg,MX6QDL,SPL" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_CM_FX6=y diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h new file mode 100644 index 0000000000..15c55beec3 --- /dev/null +++ b/include/configs/cm_fx6.h @@ -0,0 +1,192 @@ +/* + * Config file for Compulab CM-FX6 board + * + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + * + * Author: Nikita Kiryanov + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_CM_FX6_H +#define __CONFIG_CM_FX6_H + +#include +#include +#include "mx6_common.h" + +/* Machine config */ +#define CONFIG_MX6 +#define CONFIG_SYS_LITTLE_ENDIAN +#define CONFIG_MACH_TYPE 4273 +#define CONFIG_SYS_HZ 1000 + +/* Display information on boot */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_TIMESTAMP + +/* CMD */ +#include +#define CONFIG_CMD_GREPENV +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +/* RAM */ +#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Serial console */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART4_BASE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* Shell */ +#define CONFIG_SYS_PROMPT "CM-FX6 # " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* SPI flash */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* Environment */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_OFFSET (768 * 1024) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel=uImage-cm-fx6\0" \ + "autoload=no\0" \ + "loadaddr=0x10800000\0" \ + "fdtaddr=0x11000000\0" \ + "console=ttymxc3,115200\0" \ + "ethprime=FEC0\0" \ + "bootscr=boot.scr\0" \ + "bootm_low=18000000\0" \ + "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ + "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ + "fdtfile=cm-fx6.dtb\0" \ + "doboot=bootm ${loadaddr}\0" \ + "loadfdt=false\0" \ + "setboottypez=setenv kernel zImage-cm-fx6;" \ + "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \ + "setenv loadfdt true;\0" \ + "setboottypem=setenv kernel uImage-cm-fx6;" \ + "setenv doboot bootm ${loadaddr};" \ + "setenv loadfdt false;\0"\ + "run_eboot=echo Starting EBOOT ...; "\ + "mmc dev ${mmcdev} && " \ + "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ + "mmcdev=2\0" \ + "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ + "loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \ + "mmcbootscript=echo Running bootscript from mmc ...; "\ + "source ${loadaddr}\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=${mmcroot} " \ + "${video}\0" \ + "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ + "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "run doboot\0" \ + "boot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadmmcbootscript; then " \ + "run mmcbootscript;" \ + "else " \ + "if run mmcloadkernel; then " \ + "if ${loadfdt}; then " \ + "run mmcloadfdt;" \ + "fi;" \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "run setboottypem; run boot" + +/* SPI */ +#define CONFIG_SPI +#define CONFIG_MXC_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SPI_FLASH_EON +#define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_WINBOND + +/* GPIO */ +#define CONFIG_MXC_GPIO + +/* Boot */ +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* misc */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_STACKSIZE (128 * 1024) +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ + +/* SPL */ +#include "imx6_spl.h" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */ +#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024) +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) +#define CONFIG_SPL_SPI_LOAD + +#endif /* __CONFIG_CM_FX6_H */