From: Icenowy Zheng Date: Thu, 20 Jul 2017 06:00:32 +0000 (+0800) Subject: sunxi: switch PRCM to non-secure on H3/H5 SoCs X-Git-Tag: v2017.09-rc3~73^2~4 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e37a1b17e71521ce9385e305a87948d7ca55b4d8;p=u-boot sunxi: switch PRCM to non-secure on H3/H5 SoCs The PRCM of H3/H5 SoCs have a secure/non-secure switch, which controls the access to some clock/power related registers in PRCM. Current Linux kernel will access the CPUS (AR100) clock in the PRCM block, so the PRCM should be switched to non-secure. Add code to switch the PRCM to non-secure. Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Tested-by: Chen-Yu Tsai Reviewed-by: Jagan Teki --- diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index ec5b026ef5..870ff5b1e0 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -66,11 +66,17 @@ void clock_init_sec(void) #ifdef CONFIG_MACH_SUNXI_H3_H5 struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_prcm_reg * const prcm = + (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; setbits_le32(&ccm->ccu_sec_switch, CCM_SEC_SWITCH_MBUS_NONSEC | CCM_SEC_SWITCH_BUS_NONSEC | CCM_SEC_SWITCH_PLL_NONSEC); + setbits_le32(&prcm->prcm_sec_switch, + PRCM_SEC_SWITCH_APB0_CLK_NONSEC | + PRCM_SEC_SWITCH_PLL_CFG_NONSEC | + PRCM_SEC_SWITCH_PWR_GATE_NONSEC); #endif }