From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 24 Nov 2007 18:40:11 +0000 (+0100) Subject: drivers/usb : move usb drivers to drivers/usb X-Git-Tag: v1.3.1-rc1~1^2~8 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e4558666293364fc3af1c1d9381ca933fa0f1275;p=u-boot drivers/usb : move usb drivers to drivers/usb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/Makefile b/Makefile index e68454a7bf..24a351d61a 100644 --- a/Makefile +++ b/Makefile @@ -225,6 +225,7 @@ ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a endif LIBS += drivers/serial/libserial.a +LIBS += drivers/usb/libusb.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ "post/lib_$(ARCH)/libpost$(ARCH).a"; fi) diff --git a/drivers/Makefile b/drivers/Makefile index cf8b584c72..666957dff7 100755 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -54,17 +54,6 @@ COBJS-y += pc_keyb.o COBJS-y += ps2ser.o COBJS-y += ps2mult.o -# -# USB Drivers -# -COBJS-y += isp116x-hcd.o -COBJS-y += sl811_usb.o -COBJS-y += usb_ohci.o -COBJS-y += usbdcore.o -COBJS-y += usbdcore_ep0.o -COBJS-y += usbdcore_mpc8xx.o -COBJS-y += usbdcore_omap1510.o - # # Miscellaneous Drivers # diff --git a/drivers/isp116x-hcd.c b/drivers/isp116x-hcd.c deleted file mode 100644 index b21af10d0b..0000000000 --- a/drivers/isp116x-hcd.c +++ /dev/null @@ -1,1445 +0,0 @@ -/* - * ISP116x HCD (Host Controller Driver) for u-boot. - * - * Copyright (C) 2006-2007 Rodolfo Giometti - * Copyright (C) 2006-2007 Eurotech S.p.A. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c" - * (original copyright message follows): - * - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This code is based on linux driver for sl811hs chip, source at - * drivers/usb/host/sl811.c: - * - * SL811 Host Controller Interface driver for USB. - * - * Copyright (c) 2003/06, Courage Co., Ltd. - * - * Based on: - * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, - * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, - * Adam Richter, Gregory P. Smith; - * 2.Original SL811 driver (hc_sl811.o) by Pei Liu - * 3.Rewrited as sl811.o by Yin Aihua - * - * [[GNU/GPL disclaimer]] - * - * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c" - * (original copyright message follows): - * - * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00. - * - * (C) Copyright 2003 - * Gary Jennejohn, DENX Software Engineering - * - * [[GNU/GPL disclaimer]] - * - * Note: Part of this code has been derived from linux - */ - -#include - -#ifdef CONFIG_USB_ISP116X_HCD -#include -#include -#include -#include - -/* - * ISP116x chips require certain delays between accesses to its - * registers. The following timing options exist. - * - * 1. Configure your memory controller (the best) - * 2. Use ndelay (easiest, poorest). For that, enable the following macro. - * - * Value is in microseconds. - */ -#ifdef ISP116X_HCD_USE_UDELAY -#define UDELAY 1 -#endif - -/* - * On some (slowly?) machines an extra delay after data packing into - * controller's FIFOs is required, * otherwise you may get the following - * error: - * - * uboot> usb start - * (Re)start USB... - * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT - * isp116x: isp116x_submit_job: ****** FIFO not ready! ****** - * - * USB device not responding, giving up (status=4) - * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** - * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** - * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** - * 3 USB Device(s) found - * scanning bus for storage devices... 0 Storage Device(s) found - * - * Value is in milliseconds. - */ -#ifdef ISP116X_HCD_USE_EXTRA_DELAY -#define EXTRA_DELAY 2 -#endif - -/* - * Enable the following defines if you wish enable debugging messages. - */ -#undef DEBUG /* enable debugging messages */ -#undef TRACE /* enable tracing code */ -#undef VERBOSE /* verbose debugging messages */ - -#include "isp116x.h" - -#define DRIVER_VERSION "08 Jan 2007" -static const char hcd_name[] = "isp116x-hcd"; - -struct isp116x isp116x_dev; -struct isp116x_platform_data isp116x_board; -static int got_rhsc; /* root hub status change */ -struct usb_device *devgone; /* device which was disconnected */ -static int rh_devnum; /* address of Root Hub endpoint */ - -/* ------------------------------------------------------------------------- */ - -#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL)) -#define min_t(type,x,y) \ - ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; }) - -/* ------------------------------------------------------------------------- */ - -static int isp116x_reset(struct isp116x *isp116x); - -/* --- Debugging functions ------------------------------------------------- */ - -#define isp116x_show_reg(d, r) { \ - if ((r) < 0x20) { \ - DBG("%-12s[%02x]: %08x", #r, \ - r, isp116x_read_reg32(d, r)); \ - } else { \ - DBG("%-12s[%02x]: %04x", #r, \ - r, isp116x_read_reg16(d, r)); \ - } \ -} - -#define isp116x_show_regs(d) { \ - isp116x_show_reg(d, HCREVISION); \ - isp116x_show_reg(d, HCCONTROL); \ - isp116x_show_reg(d, HCCMDSTAT); \ - isp116x_show_reg(d, HCINTSTAT); \ - isp116x_show_reg(d, HCINTENB); \ - isp116x_show_reg(d, HCFMINTVL); \ - isp116x_show_reg(d, HCFMREM); \ - isp116x_show_reg(d, HCFMNUM); \ - isp116x_show_reg(d, HCLSTHRESH); \ - isp116x_show_reg(d, HCRHDESCA); \ - isp116x_show_reg(d, HCRHDESCB); \ - isp116x_show_reg(d, HCRHSTATUS); \ - isp116x_show_reg(d, HCRHPORT1); \ - isp116x_show_reg(d, HCRHPORT2); \ - isp116x_show_reg(d, HCHWCFG); \ - isp116x_show_reg(d, HCDMACFG); \ - isp116x_show_reg(d, HCXFERCTR); \ - isp116x_show_reg(d, HCuPINT); \ - isp116x_show_reg(d, HCuPINTENB); \ - isp116x_show_reg(d, HCCHIPID); \ - isp116x_show_reg(d, HCSCRATCH); \ - isp116x_show_reg(d, HCITLBUFLEN); \ - isp116x_show_reg(d, HCATLBUFLEN); \ - isp116x_show_reg(d, HCBUFSTAT); \ - isp116x_show_reg(d, HCRDITL0LEN); \ - isp116x_show_reg(d, HCRDITL1LEN); \ -} - -#if defined(TRACE) - -static int isp116x_get_current_frame_number(struct usb_device *usb_dev) -{ - struct isp116x *isp116x = &isp116x_dev; - - return isp116x_read_reg32(isp116x, HCFMNUM); -} - -static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len, char *str) -{ -#if defined(VERBOSE) - int i; -#endif - - DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx", - str, - isp116x_get_current_frame_number(dev), - usb_pipedevice(pipe), - usb_pipeendpoint(pipe), - usb_pipeout(pipe) ? 'O' : 'I', - usb_pipetype(pipe) < 2 ? - (usb_pipeint(pipe) ? - "INTR" : "ISOC") : - (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status); -#if defined(VERBOSE) - if (len > 0 && buffer) { - printf(__FILE__ ": data(%d):", len); - for (i = 0; i < 16 && i < len; i++) - printf(" %02x", ((__u8 *) buffer)[i]); - printf("%s\n", i < len ? "..." : ""); - } -#endif -} - -#define PTD_DIR_STR(ptd) ({char __c; \ - switch(PTD_GET_DIR(ptd)){ \ - case 0: __c = 's'; break; \ - case 1: __c = 'o'; break; \ - default: __c = 'i'; break; \ - }; __c;}) - -/* - Dump PTD info. The code documents the format - perfectly, right :) -*/ -static inline void dump_ptd(struct ptd *ptd) -{ -#if defined(VERBOSE) - int k; -#endif - - DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x", - PTD_GET_CC(ptd), - PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd), - PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd), - PTD_GET_TOGGLE(ptd), - PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd)); -#if defined(VERBOSE) - printf("isp116x: %s: PTD(byte): ", __FUNCTION__); - for (k = 0; k < sizeof(struct ptd); ++k) - printf("%02x ", ((u8 *) ptd)[k]); - printf("\n"); -#endif -} - -static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type) -{ -#if defined(VERBOSE) - int k; - - if (type == 0 /* 0ut data */ ) { - printf("isp116x: %s: out data: ", __FUNCTION__); - for (k = 0; k < PTD_GET_LEN(ptd); ++k) - printf("%02x ", ((u8 *) buf)[k]); - printf("\n"); - } - if (type == 1 /* 1n data */ ) { - printf("isp116x: %s: in data: ", __FUNCTION__); - for (k = 0; k < PTD_GET_COUNT(ptd); ++k) - printf("%02x ", ((u8 *) buf)[k]); - printf("\n"); - } - - if (PTD_GET_LAST(ptd)) - DBG("--- last PTD ---"); -#endif -} - -#else - -#define dump_msg(dev, pipe, buffer, len, str) do { } while (0) -#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0) - -#define dump_ptd(ptd) do {} while (0) -#define dump_ptd_data(ptd, buf, type) do {} while (0) - -#endif - -/* --- Virtual Root Hub ---------------------------------------------------- */ - -/* Device descriptor */ -static __u8 root_hub_dev_des[] = { - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x10, /* __u16 bcdUSB; v1.1 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x01, /* __u8 iProduct; */ - 0x00, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 root_hub_config_des[] = { - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ - 0x02, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -static unsigned char root_hub_str_index0[] = { - 0x04, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 0x09, /* __u8 lang ID */ - 0x04, /* __u8 lang ID */ -}; - -static unsigned char root_hub_str_index1[] = { - 0x22, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 'I', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'S', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'P', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - '1', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - '1', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - '6', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'x', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'R', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 't', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'u', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'b', /* __u8 Unicode */ - 0, /* __u8 Unicode */ -}; - -/* - * Hub class-specific descriptor is constructed dynamically - */ - -/* --- Virtual root hub management functions ------------------------------- */ - -static int rh_check_port_status(struct isp116x *isp116x) -{ - u32 temp, ndp, i; - int res; - - res = -1; - temp = isp116x_read_reg32(isp116x, HCRHSTATUS); - ndp = (temp & RH_A_NDP); - for (i = 0; i < ndp; i++) { - temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i); - /* check for a device disconnect */ - if (((temp & (RH_PS_PESC | RH_PS_CSC)) == - (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) { - res = i; - break; - } - } - return res; -} - -/* --- HC management functions --------------------------------------------- */ - -/* Write len bytes to fifo, pad till 32-bit boundary - */ -static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len) -{ - u8 *dp = (u8 *) buf; - u16 *dp2 = (u16 *) buf; - u16 w; - int quot = len % 4; - - if ((unsigned long)dp2 & 1) { - /* not aligned */ - for (; len > 1; len -= 2) { - w = *dp++; - w |= *dp++ << 8; - isp116x_raw_write_data16(isp116x, w); - } - if (len) - isp116x_write_data16(isp116x, (u16) * dp); - } else { - /* aligned */ - for (; len > 1; len -= 2) - isp116x_raw_write_data16(isp116x, *dp2++); - if (len) - isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2)); - } - if (quot == 1 || quot == 2) - isp116x_raw_write_data16(isp116x, 0); -} - -/* Read len bytes from fifo and then read till 32-bit boundary - */ -static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len) -{ - u8 *dp = (u8 *) buf; - u16 *dp2 = (u16 *) buf; - u16 w; - int quot = len % 4; - - if ((unsigned long)dp2 & 1) { - /* not aligned */ - for (; len > 1; len -= 2) { - w = isp116x_raw_read_data16(isp116x); - *dp++ = w & 0xff; - *dp++ = (w >> 8) & 0xff; - } - if (len) - *dp = 0xff & isp116x_read_data16(isp116x); - } else { - /* aligned */ - for (; len > 1; len -= 2) - *dp2++ = isp116x_raw_read_data16(isp116x); - if (len) - *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x); - } - if (quot == 1 || quot == 2) - isp116x_raw_read_data16(isp116x); -} - -/* Write PTD's and data for scheduled transfers into the fifo ram. - * Fifo must be empty and ready */ -static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev, - unsigned long pipe, struct ptd *ptd, int n, void *data, - int len) -{ - int buflen = n * sizeof(struct ptd) + len; - int i, done; - - DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen); - - isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); - isp116x_write_reg16(isp116x, HCXFERCTR, buflen); - isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET); - - done = 0; - for (i = 0; i < n; i++) { - DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i])); - - dump_ptd(&ptd[i]); - isp116x_write_data16(isp116x, ptd[i].count); - isp116x_write_data16(isp116x, ptd[i].mps); - isp116x_write_data16(isp116x, ptd[i].len); - isp116x_write_data16(isp116x, ptd[i].faddr); - - dump_ptd_data(&ptd[i], (__u8 *) data + done, 0); - write_ptddata_to_fifo(isp116x, - (__u8 *) data + done, - PTD_GET_LEN(&ptd[i])); - - done += PTD_GET_LEN(&ptd[i]); - } -} - -/* Read the processed PTD's and data from fifo ram back to URBs' buffers. - * Fifo must be full and done */ -static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev, - unsigned long pipe, struct ptd *ptd, int n, void *data, - int len) -{ - int buflen = n * sizeof(struct ptd) + len; - int i, done, cc, ret; - - isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); - isp116x_write_reg16(isp116x, HCXFERCTR, buflen); - isp116x_write_addr(isp116x, HCATLPORT); - - ret = TD_CC_NOERROR; - done = 0; - for (i = 0; i < n; i++) { - DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i])); - - ptd[i].count = isp116x_read_data16(isp116x); - ptd[i].mps = isp116x_read_data16(isp116x); - ptd[i].len = isp116x_read_data16(isp116x); - ptd[i].faddr = isp116x_read_data16(isp116x); - dump_ptd(&ptd[i]); - - read_ptddata_from_fifo(isp116x, - (__u8 *) data + done, - PTD_GET_LEN(&ptd[i])); - dump_ptd_data(&ptd[i], (__u8 *) data + done, 1); - - done += PTD_GET_LEN(&ptd[i]); - - cc = PTD_GET_CC(&ptd[i]); - - /* Data underrun means basically that we had more buffer space than - * the function had data. It is perfectly normal but upper levels have - * to know how much we actually transferred. - */ - if (cc == TD_NOTACCESSED || - (cc != TD_CC_NOERROR && (ret == TD_CC_NOERROR || ret == TD_DATAUNDERRUN))) - ret = cc; - } - - DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen); - - return ret; -} - -/* Interrupt handling - */ -static int isp116x_interrupt(struct isp116x *isp116x) -{ - u16 irqstat; - u32 intstat; - int ret = 0; - - isp116x_write_reg16(isp116x, HCuPINTENB, 0); - irqstat = isp116x_read_reg16(isp116x, HCuPINT); - isp116x_write_reg16(isp116x, HCuPINT, irqstat); - DBG(">>>>>> irqstat %x <<<<<<", irqstat); - - if (irqstat & HCuPINT_ATL) { - DBG(">>>>>> HCuPINT_ATL <<<<<<"); - udelay(500); - ret = 1; - } - - if (irqstat & HCuPINT_OPR) { - intstat = isp116x_read_reg32(isp116x, HCINTSTAT); - isp116x_write_reg32(isp116x, HCINTSTAT, intstat); - DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat); - - if (intstat & HCINT_UE) { - ERR("unrecoverable error, controller disabled"); - - /* FIXME: be optimistic, hope that bug won't repeat - * often. Make some non-interrupt context restart the - * controller. Count and limit the retries though; - * either hardware or software errors can go forever... - */ - isp116x_reset(isp116x); - ret = -1; - return -1; - } - - if (intstat & HCINT_RHSC) { - got_rhsc = 1; - ret = 1; - /* When root hub or any of its ports is going - to come out of suspend, it may take more - than 10ms for status bits to stabilize. */ - wait_ms(20); - } - - if (intstat & HCINT_SO) { - ERR("schedule overrun"); - ret = -1; - } - - irqstat &= ~HCuPINT_OPR; - } - - return ret; -} - -/* With one PTD we can transfer almost 1K in one go; - * HC does the splitting into endpoint digestible transactions - */ -struct ptd ptd[1]; - -static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe) -{ - unsigned mpck = usb_maxpacket(dev, pipe); - - /* One PTD can transfer 1023 bytes but try to always - * transfer multiples of endpoint buffer size - */ - return 1023 / mpck * mpck; -} - -/* Do an USB transfer - */ -static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe, - int dir, void *buffer, int len) -{ - struct isp116x *isp116x = &isp116x_dev; - int type = usb_pipetype(pipe); - int epnum = usb_pipeendpoint(pipe); - int max = usb_maxpacket(dev, pipe); - int dir_out = usb_pipeout(pipe); - int speed_low = usb_pipeslow(pipe); - int i, done = 0, stat, timeout, cc; - - /* 500 frames or 0.5s timeout when function is busy and NAKs transactions for a while */ - int retries = 500; - - DBG("------------------------------------------------"); - dump_msg(dev, pipe, buffer, len, "SUBMIT"); - DBG("------------------------------------------------"); - - if (len >= 1024) { - ERR("Too big job"); - dev->status = USB_ST_CRC_ERR; - return -1; - } - - if (isp116x->disabled) { - ERR("EPIPE"); - dev->status = USB_ST_CRC_ERR; - return -1; - } - - /* device pulled? Shortcut the action. */ - if (devgone == dev) { - ERR("ENODEV"); - dev->status = USB_ST_CRC_ERR; - return USB_ST_CRC_ERR; - } - - if (!max) { - ERR("pipesize for pipe %lx is zero", pipe); - dev->status = USB_ST_CRC_ERR; - return -1; - } - - if (type == PIPE_ISOCHRONOUS) { - ERR("isochronous transfers not supported"); - dev->status = USB_ST_CRC_ERR; - return -1; - } - - /* FIFO not empty? */ - if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) { - ERR("****** FIFO not empty! ******"); - dev->status = USB_ST_BUF_ERR; - return -1; - } - - retry: - isp116x_write_reg32(isp116x, HCINTSTAT, 0xff); - - /* Prepare the PTD data */ - ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | - PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out)); - ptd->mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum) | PTD_LAST_MSK; - ptd->len = PTD_LEN(len) | PTD_DIR(dir); - ptd->faddr = PTD_FA(usb_pipedevice(pipe)); - -retry_same: - /* Pack data into FIFO ram */ - pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len); -#ifdef EXTRA_DELAY - wait_ms(EXTRA_DELAY); -#endif - - /* Start the data transfer */ - - /* Allow more time for a BULK device to react - some are slow */ - if (usb_pipetype(pipe) == PIPE_BULK) - timeout = 5000; - else - timeout = 100; - - /* Wait for it to complete */ - for (;;) { - /* Check whether the controller is done */ - stat = isp116x_interrupt(isp116x); - - if (stat < 0) { - dev->status = USB_ST_CRC_ERR; - break; - } - if (stat > 0) - break; - - /* Check the timeout */ - if (--timeout) - udelay(1); - else { - ERR("CTL:TIMEOUT "); - stat = USB_ST_CRC_ERR; - break; - } - } - - /* We got an Root Hub Status Change interrupt */ - if (got_rhsc) { - isp116x_show_regs(isp116x); - - got_rhsc = 0; - - /* Abuse timeout */ - timeout = rh_check_port_status(isp116x); - if (timeout >= 0) { - /* - * FIXME! NOTE! AAAARGH! - * This is potentially dangerous because it assumes - * that only one device is ever plugged in! - */ - devgone = dev; - } - } - - /* Ok, now we can read transfer status */ - - /* FIFO not ready? */ - if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) { - ERR("****** FIFO not ready! ******"); - dev->status = USB_ST_BUF_ERR; - return -1; - } - - /* Unpack data from FIFO ram */ - cc = unpack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len); - - i = PTD_GET_COUNT(ptd); - done += i; - buffer += i; - len -= i; - - /* There was some kind of real problem; Prepare the PTD again - * and retry from the failed transaction on - */ - if (cc && cc != TD_NOTACCESSED && cc != TD_DATAUNDERRUN) { - if (retries >= 100) { - retries -= 100; - /* The chip will have toggled the toggle bit for the failed - * transaction too. We have to toggle it back. - */ - usb_settoggle(dev, epnum, dir_out, !PTD_GET_TOGGLE(ptd)); - goto retry; - } - } - /* "Normal" errors; TD_NOTACCESSED would mean in effect that the function have NAKed - * the transactions from the first on for the whole frame. It may be busy and we retry - * with the same PTD. PTD_ACTIVE (and not TD_NOTACCESSED) would mean that some of the - * PTD didn't make it because the function was busy or the frame ended before the PTD - * finished. We prepare the rest of the data and try again. - */ - else if (cc == TD_NOTACCESSED || PTD_GET_ACTIVE(ptd) || (cc != TD_DATAUNDERRUN && PTD_GET_COUNT(ptd) < PTD_GET_LEN(ptd))) { - if (retries) { - --retries; - if (cc == TD_NOTACCESSED && PTD_GET_ACTIVE(ptd) && !PTD_GET_COUNT(ptd)) goto retry_same; - usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd)); - goto retry; - } - } - - if (cc != TD_CC_NOERROR && cc != TD_DATAUNDERRUN) { - DBG("****** completition code error %x ******", cc); - switch (cc) { - case TD_CC_BITSTUFFING: - dev->status = USB_ST_BIT_ERR; - break; - case TD_CC_STALL: - dev->status = USB_ST_STALLED; - break; - case TD_BUFFEROVERRUN: - case TD_BUFFERUNDERRUN: - dev->status = USB_ST_BUF_ERR; - break; - default: - dev->status = USB_ST_CRC_ERR; - } - return -cc; - } - else usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd)); - - dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)"); - - dev->status = 0; - return done; -} - -/* Adapted from au1x00_usb_ohci.c - */ -static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int transfer_len, - struct devrequest *cmd) -{ - struct isp116x *isp116x = &isp116x_dev; - u32 tmp = 0; - - int leni = transfer_len; - int len = 0; - int stat = 0; - u32 datab[4]; - u8 *data_buf = (u8 *) datab; - u16 bmRType_bReq; - u16 wValue; - u16 wIndex; - u16 wLength; - - if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { - INFO("Root-Hub submit IRQ: NOT implemented"); - return 0; - } - - bmRType_bReq = cmd->requesttype | (cmd->request << 8); - wValue = swap_16(cmd->value); - wIndex = swap_16(cmd->index); - wLength = swap_16(cmd->length); - - DBG("--- HUB ----------------------------------------"); - DBG("submit rh urb, req=%x val=%#x index=%#x len=%d", - bmRType_bReq, wValue, wIndex, wLength); - dump_msg(dev, pipe, buffer, transfer_len, "RH"); - DBG("------------------------------------------------"); - - switch (bmRType_bReq) { - case RH_GET_STATUS: - DBG("RH_GET_STATUS"); - - *(__u16 *) data_buf = swap_16(1); - len = 2; - break; - - case RH_GET_STATUS | RH_INTERFACE: - DBG("RH_GET_STATUS | RH_INTERFACE"); - - *(__u16 *) data_buf = swap_16(0); - len = 2; - break; - - case RH_GET_STATUS | RH_ENDPOINT: - DBG("RH_GET_STATUS | RH_ENDPOINT"); - - *(__u16 *) data_buf = swap_16(0); - len = 2; - break; - - case RH_GET_STATUS | RH_CLASS: - DBG("RH_GET_STATUS | RH_CLASS"); - - tmp = isp116x_read_reg32(isp116x, HCRHSTATUS); - - *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE)); - len = 4; - break; - - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS"); - - tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1); - *(__u32 *) data_buf = swap_32(tmp); - isp116x_show_regs(isp116x); - len = 4; - break; - - case RH_CLEAR_FEATURE | RH_ENDPOINT: - DBG("RH_CLEAR_FEATURE | RH_ENDPOINT"); - - switch (wValue) { - case RH_ENDPOINT_STALL: - DBG("C_HUB_ENDPOINT_STALL"); - len = 0; - break; - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - DBG("RH_CLEAR_FEATURE | RH_CLASS"); - - switch (wValue) { - case RH_C_HUB_LOCAL_POWER: - DBG("C_HUB_LOCAL_POWER"); - len = 0; - break; - - case RH_C_HUB_OVER_CURRENT: - DBG("C_HUB_OVER_CURRENT"); - isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC); - len = 0; - break; - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS"); - - switch (wValue) { - case RH_PORT_ENABLE: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_CCS); - len = 0; - break; - - case RH_PORT_SUSPEND: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_POCI); - len = 0; - break; - - case RH_PORT_POWER: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_LSDA); - len = 0; - break; - - case RH_C_PORT_CONNECTION: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_CSC); - len = 0; - break; - - case RH_C_PORT_ENABLE: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PESC); - len = 0; - break; - - case RH_C_PORT_SUSPEND: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PSSC); - len = 0; - break; - - case RH_C_PORT_OVER_CURRENT: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_POCI); - len = 0; - break; - - case RH_C_PORT_RESET: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PRSC); - len = 0; - break; - - default: - ERR("invalid wValue"); - stat = USB_ST_STALLED; - } - - isp116x_show_regs(isp116x); - - break; - - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS"); - - switch (wValue) { - case RH_PORT_SUSPEND: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PSS); - len = 0; - break; - - case RH_PORT_RESET: - /* Spin until any current reset finishes */ - while (1) { - tmp = - isp116x_read_reg32(isp116x, - HCRHPORT1 + wIndex - 1); - if (!(tmp & RH_PS_PRS)) - break; - wait_ms(1); - } - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PRS); - wait_ms(10); - - len = 0; - break; - - case RH_PORT_POWER: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PPS); - len = 0; - break; - - case RH_PORT_ENABLE: - isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, - RH_PS_PES); - len = 0; - break; - - default: - ERR("invalid wValue"); - stat = USB_ST_STALLED; - } - - isp116x_show_regs(isp116x); - - break; - - case RH_SET_ADDRESS: - DBG("RH_SET_ADDRESS"); - - rh_devnum = wValue; - len = 0; - break; - - case RH_GET_DESCRIPTOR: - DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength); - - switch (wValue) { - case (USB_DT_DEVICE << 8): /* device descriptor */ - len = min_t(unsigned int, - leni, min_t(unsigned int, - sizeof(root_hub_dev_des), - wLength)); - data_buf = root_hub_dev_des; - break; - - case (USB_DT_CONFIG << 8): /* configuration descriptor */ - len = min_t(unsigned int, - leni, min_t(unsigned int, - sizeof(root_hub_config_des), - wLength)); - data_buf = root_hub_config_des; - break; - - case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */ - len = min_t(unsigned int, - leni, min_t(unsigned int, - sizeof(root_hub_str_index0), - wLength)); - data_buf = root_hub_str_index0; - break; - - case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */ - len = min_t(unsigned int, - leni, min_t(unsigned int, - sizeof(root_hub_str_index1), - wLength)); - data_buf = root_hub_str_index1; - break; - - default: - ERR("invalid wValue"); - stat = USB_ST_STALLED; - } - - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - DBG("RH_GET_DESCRIPTOR | RH_CLASS"); - - tmp = isp116x_read_reg32(isp116x, HCRHDESCA); - - data_buf[0] = 0x09; /* min length; */ - data_buf[1] = 0x29; - data_buf[2] = tmp & RH_A_NDP; - data_buf[3] = 0; - if (tmp & RH_A_PSM) /* per-port power switching? */ - data_buf[3] |= 0x01; - if (tmp & RH_A_NOCP) /* no overcurrent reporting? */ - data_buf[3] |= 0x10; - else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */ - data_buf[3] |= 0x08; - - /* Corresponds to data_buf[4-7] */ - datab[1] = 0; - data_buf[5] = (tmp & RH_A_POTPGT) >> 24; - - tmp = isp116x_read_reg32(isp116x, HCRHDESCB); - - data_buf[7] = tmp & RH_B_DR; - if (data_buf[2] < 7) - data_buf[8] = 0xff; - else { - data_buf[0] += 2; - data_buf[8] = (tmp & RH_B_DR) >> 8; - data_buf[10] = data_buf[9] = 0xff; - } - - len = min_t(unsigned int, leni, - min_t(unsigned int, data_buf[0], wLength)); - break; - - case RH_GET_CONFIGURATION: - DBG("RH_GET_CONFIGURATION"); - - *(__u8 *) data_buf = 0x01; - len = 1; - break; - - case RH_SET_CONFIGURATION: - DBG("RH_SET_CONFIGURATION"); - - isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC); - len = 0; - break; - - default: - ERR("*** *** *** unsupported root hub command *** *** ***"); - stat = USB_ST_STALLED; - } - - len = min_t(int, len, leni); - if (buffer != data_buf) - memcpy(buffer, data_buf, len); - - dev->act_len = len; - dev->status = stat; - DBG("dev act_len %d, status %d", dev->act_len, dev->status); - - dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)"); - - return stat; -} - -/* --- Transfer functions -------------------------------------------------- */ - -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len, int interval) -{ - DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d", - dev, pipe, buffer, len, interval); - - return -1; -} - -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len, struct devrequest *setup) -{ - int devnum = usb_pipedevice(pipe); - int epnum = usb_pipeendpoint(pipe); - int max = max_transfer_len(dev, pipe); - int dir_in = usb_pipein(pipe); - int done, ret; - - /* Control message is for the HUB? */ - if (devnum == rh_devnum) - return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup); - - /* Ok, no HUB message so send the message to the device */ - - /* Setup phase */ - DBG("--- SETUP PHASE --------------------------------"); - usb_settoggle(dev, epnum, 1, 0); - ret = isp116x_submit_job(dev, pipe, - PTD_DIR_SETUP, - setup, sizeof(struct devrequest)); - if (ret < 0) { - DBG("control setup phase error (ret = %d", ret); - return -1; - } - - /* Data phase */ - DBG("--- DATA PHASE ---------------------------------"); - done = 0; - usb_settoggle(dev, epnum, !dir_in, 1); - while (done < len) { - ret = isp116x_submit_job(dev, pipe, - dir_in ? PTD_DIR_IN : PTD_DIR_OUT, - (__u8 *) buffer + done, - max > len - done ? len - done : max); - if (ret < 0) { - DBG("control data phase error (ret = %d)", ret); - return -1; - } - done += ret; - - if (dir_in && ret < max) /* short packet */ - break; - } - - /* Status phase */ - DBG("--- STATUS PHASE -------------------------------"); - usb_settoggle(dev, epnum, !dir_in, 1); - ret = isp116x_submit_job(dev, pipe, - !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0); - if (ret < 0) { - DBG("control status phase error (ret = %d", ret); - return -1; - } - - dev->act_len = done; - - dump_msg(dev, pipe, buffer, len, "DEV(ret)"); - - return done; -} - -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len) -{ - int dir_out = usb_pipeout(pipe); - int max = max_transfer_len(dev, pipe); - int done, ret; - - DBG("--- BULK ---------------------------------------"); - DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d", - usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); - - done = 0; - while (done < len) { - ret = isp116x_submit_job(dev, pipe, - !dir_out ? PTD_DIR_IN : PTD_DIR_OUT, - (__u8 *) buffer + done, - max > len - done ? len - done : max); - if (ret < 0) { - DBG("error on bulk message (ret = %d)", ret); - return -1; - } - - done += ret; - - if (!dir_out && ret < max) /* short packet */ - break; - } - - dev->act_len = done; - - return 0; -} - -/* --- Basic functions ----------------------------------------------------- */ - -static int isp116x_sw_reset(struct isp116x *isp116x) -{ - int retries = 15; - int ret = 0; - - DBG(""); - - isp116x->disabled = 1; - - isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC); - isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR); - while (--retries) { - /* It usually resets within 1 ms */ - wait_ms(1); - if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR)) - break; - } - if (!retries) { - ERR("software reset timeout"); - ret = -1; - } - return ret; -} - -static int isp116x_reset(struct isp116x *isp116x) -{ - unsigned long t; - u16 clkrdy = 0; - int ret, timeout = 15 /* ms */ ; - - DBG(""); - - ret = isp116x_sw_reset(isp116x); - if (ret) - return ret; - - for (t = 0; t < timeout; t++) { - clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY; - if (clkrdy) - break; - wait_ms(1); - } - if (!clkrdy) { - ERR("clock not ready after %dms", timeout); - /* After sw_reset the clock won't report to be ready, if - H_WAKEUP pin is high. */ - ERR("please make sure that the H_WAKEUP pin is pulled low!"); - ret = -1; - } - return ret; -} - -static void isp116x_stop(struct isp116x *isp116x) -{ - u32 val; - - DBG(""); - - isp116x_write_reg16(isp116x, HCuPINTENB, 0); - - /* Switch off ports' power, some devices don't come up - after next 'start' without this */ - val = isp116x_read_reg32(isp116x, HCRHDESCA); - val &= ~(RH_A_NPS | RH_A_PSM); - isp116x_write_reg32(isp116x, HCRHDESCA, val); - isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS); - - isp116x_sw_reset(isp116x); -} - -/* - * Configure the chip. The chip must be successfully reset by now. - */ -static int isp116x_start(struct isp116x *isp116x) -{ - struct isp116x_platform_data *board = isp116x->board; - u32 val; - - DBG(""); - - /* Clear interrupt status and disable all interrupt sources */ - isp116x_write_reg16(isp116x, HCuPINT, 0xff); - isp116x_write_reg16(isp116x, HCuPINTENB, 0); - - isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE); - isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE); - - /* Hardware configuration */ - val = HCHWCFG_DBWIDTH(1); - if (board->sel15Kres) - val |= HCHWCFG_15KRSEL; - /* Remote wakeup won't work without working clock */ - if (board->remote_wakeup_enable) - val |= HCHWCFG_CLKNOTSTOP; - if (board->oc_enable) - val |= HCHWCFG_ANALOG_OC; - isp116x_write_reg16(isp116x, HCHWCFG, val); - - /* --- Root hub configuration */ - val = (25 << 24) & RH_A_POTPGT; - /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to - be always set. Yet, instead, we request individual port - power switching. */ - val |= RH_A_PSM; - /* Report overcurrent per port */ - val |= RH_A_OCPM; - isp116x_write_reg32(isp116x, HCRHDESCA, val); - isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA); - - val = RH_B_PPCM; - isp116x_write_reg32(isp116x, HCRHDESCB, val); - isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB); - - val = 0; - if (board->remote_wakeup_enable) - val |= RH_HS_DRWE; - isp116x_write_reg32(isp116x, HCRHSTATUS, val); - isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS); - - isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf); - - /* Go operational */ - val = HCCONTROL_USB_OPER; - if (board->remote_wakeup_enable) - val |= HCCONTROL_RWE; - isp116x_write_reg32(isp116x, HCCONTROL, val); - - /* Disable ports to avoid race in device enumeration */ - isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS); - isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS); - - isp116x_show_regs(isp116x); - - isp116x->disabled = 0; - - return 0; -} - -/* --- Init functions ------------------------------------------------------ */ - -int isp116x_check_id(struct isp116x *isp116x) -{ - int val; - - val = isp116x_read_reg16(isp116x, HCCHIPID); - if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) { - ERR("invalid chip ID %04x", val); - return -1; - } - - return 0; -} - -int usb_lowlevel_init(void) -{ - struct isp116x *isp116x = &isp116x_dev; - - DBG(""); - - got_rhsc = rh_devnum = 0; - - /* Init device registers addr */ - isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR; - isp116x->data_reg = (u16 *) ISP116X_HCD_DATA; - - /* Setup specific board settings */ -#ifdef ISP116X_HCD_SEL15kRES - isp116x_board.sel15Kres = 1; -#endif -#ifdef ISP116X_HCD_OC_ENABLE - isp116x_board.oc_enable = 1; -#endif -#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE - isp116x_board.remote_wakeup_enable = 1; -#endif - isp116x->board = &isp116x_board; - - /* Try to get ISP116x silicon chip ID */ - if (isp116x_check_id(isp116x) < 0) - return -1; - - isp116x->disabled = 1; - isp116x->sleeping = 0; - - isp116x_reset(isp116x); - isp116x_start(isp116x); - - return 0; -} - -int usb_lowlevel_stop(void) -{ - struct isp116x *isp116x = &isp116x_dev; - - DBG(""); - - if (!isp116x->disabled) - isp116x_stop(isp116x); - - return 0; -} - -#endif /* CONFIG_USB_ISP116X_HCD */ diff --git a/drivers/isp116x.h b/drivers/isp116x.h deleted file mode 100644 index a3ce3b582c..0000000000 --- a/drivers/isp116x.h +++ /dev/null @@ -1,489 +0,0 @@ -/* - * ISP116x register declarations and HCD data structures - * - * Copyright (C) 2007 Rodolfo Giometti - * Copyright (C) 2007 Eurotech S.p.A. - * Copyright (C) 2005 Olav Kongas - * Portions: - * Copyright (C) 2004 Lothar Wassmann - * Copyright (C) 2004 Psion Teklogix - * Copyright (C) 2004 David Brownell - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifdef DEBUG -#define DBG(fmt, args...) \ - printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) -#else -#define DBG(fmt, args...) do {} while (0) -#endif - -#ifdef VERBOSE -# define VDBG DBG -#else -# define VDBG(fmt, args...) do {} while (0) -#endif - -#define ERR(fmt, args...) \ - printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) -#define WARN(fmt, args...) \ - printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) -#define INFO(fmt, args...) \ - printf("isp116x: " fmt "\n" , ## args) - -/* ------------------------------------------------------------------------- */ - -/* us of 1ms frame */ -#define MAX_LOAD_LIMIT 850 - -/* Full speed: max # of bytes to transfer for a single urb - at a time must be < 1024 && must be multiple of 64. - 832 allows transfering 4kiB within 5 frames. */ -#define MAX_TRANSFER_SIZE_FULLSPEED 832 - -/* Low speed: there is no reason to schedule in very big - chunks; often the requested long transfers are for - string descriptors containing short strings. */ -#define MAX_TRANSFER_SIZE_LOWSPEED 64 - -/* Bytetime (us), a rough indication of how much time it - would take to transfer a byte of useful data over USB */ -#define BYTE_TIME_FULLSPEED 1 -#define BYTE_TIME_LOWSPEED 20 - -/* Buffer sizes */ -#define ISP116x_BUF_SIZE 4096 -#define ISP116x_ITL_BUFSIZE 0 -#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE)) - -#define ISP116x_WRITE_OFFSET 0x80 - -/* --- ISP116x registers/bits ---------------------------------------------- */ - -#define HCREVISION 0x00 -#define HCCONTROL 0x01 -#define HCCONTROL_HCFS (3 << 6) /* host controller - functional state */ -#define HCCONTROL_USB_RESET (0 << 6) -#define HCCONTROL_USB_RESUME (1 << 6) -#define HCCONTROL_USB_OPER (2 << 6) -#define HCCONTROL_USB_SUSPEND (3 << 6) -#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */ -#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */ -#define HCCMDSTAT 0x02 -#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */ -#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */ -#define HCINTSTAT 0x03 -#define HCINT_SO (1 << 0) /* scheduling overrun */ -#define HCINT_WDH (1 << 1) /* writeback of done_head */ -#define HCINT_SF (1 << 2) /* start frame */ -#define HCINT_RD (1 << 3) /* resume detect */ -#define HCINT_UE (1 << 4) /* unrecoverable error */ -#define HCINT_FNO (1 << 5) /* frame number overflow */ -#define HCINT_RHSC (1 << 6) /* root hub status change */ -#define HCINT_OC (1 << 30) /* ownership change */ -#define HCINT_MIE (1 << 31) /* master interrupt enable */ -#define HCINTENB 0x04 -#define HCINTDIS 0x05 -#define HCFMINTVL 0x0d -#define HCFMREM 0x0e -#define HCFMNUM 0x0f -#define HCLSTHRESH 0x11 -#define HCRHDESCA 0x12 -#define RH_A_NDP (0x3 << 0) /* # downstream ports */ -#define RH_A_PSM (1 << 8) /* power switching mode */ -#define RH_A_NPS (1 << 9) /* no power switching */ -#define RH_A_DT (1 << 10) /* device type (mbz) */ -#define RH_A_OCPM (1 << 11) /* overcurrent protection - mode */ -#define RH_A_NOCP (1 << 12) /* no overcurrent protection */ -#define RH_A_POTPGT (0xff << 24) /* power on -> power good - time */ -#define HCRHDESCB 0x13 -#define RH_B_DR (0xffff << 0) /* device removable flags */ -#define RH_B_PPCM (0xffff << 16) /* port power control mask */ -#define HCRHSTATUS 0x14 -#define RH_HS_LPS (1 << 0) /* local power status */ -#define RH_HS_OCI (1 << 1) /* over current indicator */ -#define RH_HS_DRWE (1 << 15) /* device remote wakeup - enable */ -#define RH_HS_LPSC (1 << 16) /* local power status change */ -#define RH_HS_OCIC (1 << 17) /* over current indicator - change */ -#define RH_HS_CRWE (1 << 31) /* clear remote wakeup - enable */ -#define HCRHPORT1 0x15 -#define RH_PS_CCS (1 << 0) /* current connect status */ -#define RH_PS_PES (1 << 1) /* port enable status */ -#define RH_PS_PSS (1 << 2) /* port suspend status */ -#define RH_PS_POCI (1 << 3) /* port over current - indicator */ -#define RH_PS_PRS (1 << 4) /* port reset status */ -#define RH_PS_PPS (1 << 8) /* port power status */ -#define RH_PS_LSDA (1 << 9) /* low speed device attached */ -#define RH_PS_CSC (1 << 16) /* connect status change */ -#define RH_PS_PESC (1 << 17) /* port enable status change */ -#define RH_PS_PSSC (1 << 18) /* port suspend status - change */ -#define RH_PS_OCIC (1 << 19) /* over current indicator - change */ -#define RH_PS_PRSC (1 << 20) /* port reset status change */ -#define HCRHPORT_CLRMASK (0x1f << 16) -#define HCRHPORT2 0x16 -#define HCHWCFG 0x20 -#define HCHWCFG_15KRSEL (1 << 12) -#define HCHWCFG_CLKNOTSTOP (1 << 11) -#define HCHWCFG_ANALOG_OC (1 << 10) -#define HCHWCFG_DACK_MODE (1 << 8) -#define HCHWCFG_EOT_POL (1 << 7) -#define HCHWCFG_DACK_POL (1 << 6) -#define HCHWCFG_DREQ_POL (1 << 5) -#define HCHWCFG_DBWIDTH_MASK (0x03 << 3) -#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK) -#define HCHWCFG_INT_POL (1 << 2) -#define HCHWCFG_INT_TRIGGER (1 << 1) -#define HCHWCFG_INT_ENABLE (1 << 0) -#define HCDMACFG 0x21 -#define HCDMACFG_BURST_LEN_MASK (0x03 << 5) -#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK) -#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0) -#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1) -#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2) -#define HCDMACFG_DMA_ENABLE (1 << 4) -#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1) -#define HCDMACFG_CTR_SEL (1 << 2) -#define HCDMACFG_ITLATL_SEL (1 << 1) -#define HCDMACFG_DMA_RW_SELECT (1 << 0) -#define HCXFERCTR 0x22 -#define HCuPINT 0x24 -#define HCuPINT_SOF (1 << 0) -#define HCuPINT_ATL (1 << 1) -#define HCuPINT_AIIEOT (1 << 2) -#define HCuPINT_OPR (1 << 4) -#define HCuPINT_SUSP (1 << 5) -#define HCuPINT_CLKRDY (1 << 6) -#define HCuPINTENB 0x25 -#define HCCHIPID 0x27 -#define HCCHIPID_MASK 0xff00 -#define HCCHIPID_MAGIC 0x6100 -#define HCSCRATCH 0x28 -#define HCSWRES 0x29 -#define HCSWRES_MAGIC 0x00f6 -#define HCITLBUFLEN 0x2a -#define HCATLBUFLEN 0x2b -#define HCBUFSTAT 0x2c -#define HCBUFSTAT_ITL0_FULL (1 << 0) -#define HCBUFSTAT_ITL1_FULL (1 << 1) -#define HCBUFSTAT_ATL_FULL (1 << 2) -#define HCBUFSTAT_ITL0_DONE (1 << 3) -#define HCBUFSTAT_ITL1_DONE (1 << 4) -#define HCBUFSTAT_ATL_DONE (1 << 5) -#define HCRDITL0LEN 0x2d -#define HCRDITL1LEN 0x2e -#define HCITLPORT 0x40 -#define HCATLPORT 0x41 - -/* PTD accessor macros. */ -#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0) -#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK) -#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10) -#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK) -#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11) -#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK) -#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12) -#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK) -#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0) -#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK) -#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10) -#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK) -#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11) -#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK) -#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12) -#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK) -#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0) -#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK) -#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10) -#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK) -#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13) -#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK) -#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0) -#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK) -#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7) -#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK) - -/* Hardware transfer status codes -- CC from ptd->count */ -#define TD_CC_NOERROR 0x00 -#define TD_CC_CRC 0x01 -#define TD_CC_BITSTUFFING 0x02 -#define TD_CC_DATATOGGLEM 0x03 -#define TD_CC_STALL 0x04 -#define TD_DEVNOTRESP 0x05 -#define TD_PIDCHECKFAIL 0x06 -#define TD_UNEXPECTEDPID 0x07 -#define TD_DATAOVERRUN 0x08 -#define TD_DATAUNDERRUN 0x09 - /* 0x0A, 0x0B reserved for hardware */ -#define TD_BUFFEROVERRUN 0x0C -#define TD_BUFFERUNDERRUN 0x0D - /* 0x0E, 0x0F reserved for HCD */ -#define TD_NOTACCESSED 0x0F - -/* ------------------------------------------------------------------------- */ - -#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ -#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) - -/* Philips transfer descriptor */ -struct ptd { - u16 count; -#define PTD_COUNT_MSK (0x3ff << 0) -#define PTD_TOGGLE_MSK (1 << 10) -#define PTD_ACTIVE_MSK (1 << 11) -#define PTD_CC_MSK (0xf << 12) - u16 mps; -#define PTD_MPS_MSK (0x3ff << 0) -#define PTD_SPD_MSK (1 << 10) -#define PTD_LAST_MSK (1 << 11) -#define PTD_EP_MSK (0xf << 12) - u16 len; -#define PTD_LEN_MSK (0x3ff << 0) -#define PTD_DIR_MSK (3 << 10) -#define PTD_DIR_SETUP (0) -#define PTD_DIR_OUT (1) -#define PTD_DIR_IN (2) -#define PTD_B5_5_MSK (1 << 13) - u16 faddr; -#define PTD_FA_MSK (0x7f << 0) -#define PTD_FMT_MSK (1 << 7) -} __attribute__ ((packed, aligned(2))); - -struct isp116x_ep { - struct usb_device *udev; - struct ptd ptd; - - u8 maxpacket; - u8 epnum; - u8 nextpid; - - u16 length; /* of current packet */ - unsigned char *data; /* to databuf */ - - u16 error_count; -}; - -/* URB struct */ -#define N_URB_TD 48 -#define URB_DEL 1 -typedef struct { - struct isp116x_ep *ed; - void *transfer_buffer; /* (in) associated data buffer */ - int actual_length; /* (return) actual transfer length */ - unsigned long pipe; /* (in) pipe information */ -#if 0 - int state; -#endif -} urb_priv_t; - -struct isp116x_platform_data { - /* Enable internal resistors on downstream ports */ - unsigned sel15Kres:1; - /* On-chip overcurrent detection */ - unsigned oc_enable:1; - /* Enable wakeup by devices on usb bus (e.g. wakeup - by attachment/detachment or by device activity - such as moving a mouse). When chosen, this option - prevents stopping internal clock, increasing - thereby power consumption in suspended state. */ - unsigned remote_wakeup_enable:1; -}; - -struct isp116x { - u16 *addr_reg; - u16 *data_reg; - - struct isp116x_platform_data *board; - - struct dentry *dentry; - unsigned long stat1, stat2, stat4, stat8, stat16; - - /* Status flags */ - unsigned disabled:1; - unsigned sleeping:1; - - /* Root hub registers */ - u32 rhdesca; - u32 rhdescb; - u32 rhstatus; - u32 rhport[2]; - - /* Schedule for the current frame */ - struct isp116x_ep *atl_active; - int atl_buflen; - int atl_bufshrt; - int atl_last_dir; - int atl_finishing; -}; - -/* ------------------------------------------------- */ - -/* Inter-io delay (ns). The chip is picky about access timings; it - * expects at least: - * 150ns delay between consecutive accesses to DATA_REG, - * 300ns delay between access to ADDR_REG and DATA_REG - * OE, WE MUST NOT be changed during these intervals - */ -#if defined(UDELAY) -#define isp116x_delay(h,d) udelay(d) -#else -#define isp116x_delay(h,d) do {} while (0) -#endif - -static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg) -{ - writew(reg & 0xff, isp116x->addr_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val) -{ - writew(val, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val) -{ - __raw_writew(val, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline u16 isp116x_read_data16(struct isp116x *isp116x) -{ - u16 val; - - val = readw(isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - return val; -} - -static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x) -{ - u16 val; - - val = __raw_readw(isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - return val; -} - -static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val) -{ - writew(val & 0xffff, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - writew(val >> 16, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline u32 isp116x_read_data32(struct isp116x *isp116x) -{ - u32 val; - - val = (u32) readw(isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - val |= ((u32) readw(isp116x->data_reg)) << 16; - isp116x_delay(isp116x, UDELAY); - return val; -} - -/* Let's keep register access functions out of line. Hint: - we wait at least 150 ns at every access. -*/ -static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg) -{ - isp116x_write_addr(isp116x, reg); - return isp116x_read_data16(isp116x); -} - -static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg) -{ - isp116x_write_addr(isp116x, reg); - return isp116x_read_data32(isp116x); -} - -static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg, - unsigned val) -{ - isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); - isp116x_write_data16(isp116x, (u16) (val & 0xffff)); -} - -static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, - unsigned val) -{ - isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); - isp116x_write_data32(isp116x, (u32) val); -} - -/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */ - -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 - -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 diff --git a/drivers/sl811.h b/drivers/sl811.h deleted file mode 100644 index c1f9f013bd..0000000000 --- a/drivers/sl811.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef __UBOOT_SL811_H -#define __UBOOT_SL811_H - -#undef SL811_DEBUG - -#ifdef SL811_DEBUG - #define PDEBUG(level, fmt, args...) \ - if (debug >= (level)) printf("[%s:%d] " fmt, \ - __PRETTY_FUNCTION__, __LINE__ , ## args) -#else - #define PDEBUG(level, fmt, args...) do {} while(0) -#endif - -/* Sl811 host control register */ -#define SL811_CTRL_A 0x00 -#define SL811_ADDR_A 0x01 -#define SL811_LEN_A 0x02 -#define SL811_STS_A 0x03 /* read */ -#define SL811_PIDEP_A 0x03 /* write */ -#define SL811_CNT_A 0x04 /* read */ -#define SL811_DEV_A 0x04 /* write */ -#define SL811_CTRL1 0x05 -#define SL811_INTR 0x06 -#define SL811_CTRL_B 0x08 -#define SL811_ADDR_B 0x09 -#define SL811_LEN_B 0x0A -#define SL811_STS_B 0x0B /* read */ -#define SL811_PIDEP_B 0x0B /* write */ -#define SL811_CNT_B 0x0C /* read */ -#define SL811_DEV_B 0x0C /* write */ -#define SL811_INTRSTS 0x0D /* write clears bitwise */ -#define SL811_HWREV 0x0E /* read */ -#define SL811_SOFLOW 0x0E /* write */ -#define SL811_SOFCNTDIV 0x0F /* read */ -#define SL811_CTRL2 0x0F /* write */ - -/* USB control register bits (addr 0x00 and addr 0x08) */ -#define SL811_USB_CTRL_ARM 0x01 -#define SL811_USB_CTRL_ENABLE 0x02 -#define SL811_USB_CTRL_DIR_OUT 0x04 -#define SL811_USB_CTRL_ISO 0x10 -#define SL811_USB_CTRL_SOF 0x20 -#define SL811_USB_CTRL_TOGGLE_1 0x40 -#define SL811_USB_CTRL_PREAMBLE 0x80 - -/* USB status register bits (addr 0x03 and addr 0x0B) */ -#define SL811_USB_STS_ACK 0x01 -#define SL811_USB_STS_ERROR 0x02 -#define SL811_USB_STS_TIMEOUT 0x04 -#define SL811_USB_STS_TOGGLE_1 0x08 -#define SL811_USB_STS_SETUP 0x10 -#define SL811_USB_STS_OVERFLOW 0x20 -#define SL811_USB_STS_NAK 0x40 -#define SL811_USB_STS_STALL 0x80 - -/* Control register 1 bits (addr 0x05) */ -#define SL811_CTRL1_SOF 0x01 -#define SL811_CTRL1_RESET 0x08 -#define SL811_CTRL1_JKSTATE 0x10 -#define SL811_CTRL1_SPEED_LOW 0x20 -#define SL811_CTRL1_SUSPEND 0x40 - -/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */ -#define SL811_INTR_DONE_A 0x01 -#define SL811_INTR_DONE_B 0x02 -#define SL811_INTR_SOF 0x10 -#define SL811_INTR_INSRMV 0x20 -#define SL811_INTR_DETECT 0x40 -#define SL811_INTR_NOTPRESENT 0x40 -#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */ - -/* HW rev and SOF lo register bits (addr 0x0E) */ -#define SL811_HWR_HWREV 0xF0 - -/* SOF counter and control reg 2 (addr 0x0F) */ -#define SL811_CTL2_SOFHI 0x3F -#define SL811_CTL2_DSWAP 0x40 -#define SL811_CTL2_HOST 0x80 - -/* Set up for 1-ms SOF time. */ -#define SL811_12M_LOW 0xE0 -#define SL811_12M_HI 0x2E - -#define SL811_DATA_START 0x10 -#define SL811_DATA_LIMIT 240 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 - - -#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep)) - -#endif /* __UBOOT_SL811_H */ diff --git a/drivers/sl811_usb.c b/drivers/sl811_usb.c deleted file mode 100644 index b0cdf0bc2c..0000000000 --- a/drivers/sl811_usb.c +++ /dev/null @@ -1,737 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This code is based on linux driver for sl811hs chip, source at - * drivers/usb/host/sl811.c: - * - * SL811 Host Controller Interface driver for USB. - * - * Copyright (c) 2003/06, Courage Co., Ltd. - * - * Based on: - * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, - * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, - * Adam Richter, Gregory P. Smith; - * 2.Original SL811 driver (hc_sl811.o) by Pei Liu - * 3.Rewrited as sl811.o by Yin Aihua - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#ifdef CONFIG_USB_SL811HS -#include -#include -#include "sl811.h" - -#include "../board/kup/common/kup.h" - -#ifdef __PPC__ -# define EIEIO __asm__ volatile ("eieio") -#else -# define EIEIO /* nothing */ -#endif - -#define SL811_ADR (0x50000000) -#define SL811_DAT (0x50000001) - -#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) - -#ifdef SL811_DEBUG -static int debug = 9; -#endif - -static int root_hub_devnum = 0; -static struct usb_port_status rh_status = { 0 };/* root hub port status */ - -static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, - void *data, int buf_len, struct devrequest *cmd); - -static void sl811_write (__u8 index, __u8 data) -{ - *(volatile unsigned char *) (SL811_ADR) = index; - EIEIO; - *(volatile unsigned char *) (SL811_DAT) = data; - EIEIO; -} - -static __u8 sl811_read (__u8 index) -{ - __u8 data; - - *(volatile unsigned char *) (SL811_ADR) = index; - EIEIO; - data = *(volatile unsigned char *) (SL811_DAT); - EIEIO; - return (data); -} - -/* - * Read consecutive bytes of data from the SL811H/SL11H buffer - */ -static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size) -{ - *(volatile unsigned char *) (SL811_ADR) = offset; - EIEIO; - while (size--) { - *buf++ = *(volatile unsigned char *) (SL811_DAT); - EIEIO; - } -} - -/* - * Write consecutive bytes of data to the SL811H/SL11H buffer - */ -static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size) -{ - *(volatile unsigned char *) (SL811_ADR) = offset; - EIEIO; - while (size--) { - *(volatile unsigned char *) (SL811_DAT) = *buf++; - EIEIO; - } -} - -int usb_init_kup4x (void) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - int i; - unsigned char tmp; - - memctl = &immap->im_memctl; - memctl->memc_or7 = 0xFFFF8726; - memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */ - /* BP 14 low = USB ON */ - immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC); - /* PB 14 nomal port */ - immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC); - /* output */ - immap->im_cpm.cp_pbdir |= (BP_USB_VCC); - - puts ("USB: "); - - for (i = 0x10; i < 0xff; i++) { - sl811_write(i, i); - tmp = (sl811_read(i)); - if (tmp != i) { - printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp); - return (-1); - } - } - printf ("SL811 ready\n"); - return (0); -} - -/* - * This function resets SL811HS controller and detects the speed of - * the connecting device - * - * Return: 0 = no device attached; 1 = USB device attached - */ -static int sl811_hc_reset(void) -{ - int status ; - - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - - mdelay(20); - - /* Disable hardware SOF generation, clear all irq status. */ - sl811_write(SL811_CTRL1, 0); - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - status = sl811_read(SL811_INTRSTS); - - if (status & SL811_INTR_NOTPRESENT) { - /* Device is not present */ - PDEBUG(0, "Device not present\n"); - rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE); - rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; - sl811_write(SL811_INTR, SL811_INTR_INSRMV); - return 0; - } - - /* Send SOF to address 0, endpoint 0. */ - sl811_write(SL811_LEN_B, 0); - sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0)); - sl811_write(SL811_DEV_B, 0x00); - sl811_write(SL811_SOFLOW, SL811_12M_LOW); - - if (status & SL811_INTR_SPEED_FULL) { - /* full speed device connect directly to root hub */ - PDEBUG (0, "Full speed Device attached\n"); - - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - mdelay(20); - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_SOF); - - /* start the SOF or EOP */ - sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); - rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION; - rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED; - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - } else { - /* slow speed device connect directly to root-hub */ - PDEBUG(0, "Low speed Device attached\n"); - - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - mdelay(20); - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF); - - /* start the SOF or EOP */ - sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); - rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED; - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - } - - rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; - sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A); - - return 1; -} - -int usb_lowlevel_init(void) -{ - root_hub_devnum = 0; - sl811_hc_reset(); - return 0; -} - -int usb_lowlevel_stop(void) -{ - sl811_hc_reset(); - return 0; -} - -static int calc_needed_buswidth(int bytes, int need_preamble) -{ - return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048; -} - -static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len) -{ - __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE; - __u16 status = 0; - int err = 0, time_start = get_timer(0); - int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && - usb_pipeslow(pipe); - - if (len > 239) - return -1; - - if (usb_pipeout(pipe)) - ctrl |= SL811_USB_CTRL_DIR_OUT; - if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) - ctrl |= SL811_USB_CTRL_TOGGLE_1; - if (need_preamble) - ctrl |= SL811_USB_CTRL_PREAMBLE; - - sl811_write(SL811_INTRSTS, 0xff); - - while (err < 3) { - sl811_write(SL811_ADDR_A, 0x10); - sl811_write(SL811_LEN_A, len); - if (usb_pipeout(pipe) && len) - sl811_write_buf(0x10, buffer, len); - - if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && - sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble)) - ctrl |= SL811_USB_CTRL_SOF; - else - ctrl &= ~SL811_USB_CTRL_SOF; - - sl811_write(SL811_CTRL_A, ctrl); - while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) { - if (5*CFG_HZ < get_timer(time_start)) { - printf("USB transmit timed out\n"); - return -USB_ST_CRC_ERR; - } - } - - sl811_write(SL811_INTRSTS, 0xff); - status = sl811_read(SL811_STS_A); - - if (status & SL811_USB_STS_ACK) { - int remainder = sl811_read(SL811_CNT_A); - if (remainder) { - PDEBUG(0, "usb transfer remainder = %d\n", remainder); - len -= remainder; - } - if (usb_pipein(pipe) && len) - sl811_read_buf(0x10, buffer, len); - return len; - } - - if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK) - continue; - - PDEBUG(0, "usb transfer error %#x\n", (int)status); - err++; - } - - err = 0; - - if (status & SL811_USB_STS_ERROR) - err |= USB_ST_BUF_ERR; - if (status & SL811_USB_STS_TIMEOUT) - err |= USB_ST_CRC_ERR; - if (status & SL811_USB_STS_STALL) - err |= USB_ST_STALLED; - - return -err; -} - -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len) -{ - int dir_out = usb_pipeout(pipe); - int ep = usb_pipeendpoint(pipe); - int max = usb_maxpacket(dev, pipe); - int done = 0; - - PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n", - usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); - - dev->status = 0; - - sl811_write(SL811_DEV_A, usb_pipedevice(pipe)); - sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep)); - while (done < len) { - int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, - max > len - done ? len - done : max); - if (res < 0) { - dev->status = -res; - return res; - } - - if (!dir_out && res < max) /* short packet */ - break; - - done += res; - usb_dotoggle(dev, ep, dir_out); - } - - dev->act_len = done; - - return 0; -} - -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len,struct devrequest *setup) -{ - int done = 0; - int devnum = usb_pipedevice(pipe); - int ep = usb_pipeendpoint(pipe); - - dev->status = 0; - - if (devnum == root_hub_devnum) - return sl811_rh_submit_urb(dev, pipe, buffer, len, setup); - - PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n", - devnum, ep, buffer, len, (int)setup->requesttype, - (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64); - - sl811_write(SL811_DEV_A, devnum); - sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep)); - /* setup phase */ - usb_settoggle(dev, ep, 1, 0); - if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep), - (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) { - int dir_in = usb_pipein(pipe); - int max = usb_maxpacket(dev, pipe); - - /* data phase */ - sl811_write(SL811_PIDEP_A, - PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep)); - usb_settoggle(dev, ep, usb_pipeout(pipe), 1); - while (done < len) { - int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, - max > len - done ? len - done : max); - if (res < 0) { - PDEBUG(0, "status data failed!\n"); - dev->status = -res; - return 0; - } - done += res; - usb_dotoggle(dev, ep, usb_pipeout(pipe)); - if (dir_in && res < max) /* short packet */ - break; - } - - /* status phase */ - sl811_write(SL811_PIDEP_A, - PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep)); - usb_settoggle(dev, ep, !usb_pipeout(pipe), 1); - if (sl811_send_packet(dev, - !dir_in ? usb_rcvctrlpipe(dev, ep) : - usb_sndctrlpipe(dev, ep), - 0, 0) < 0) { - PDEBUG(0, "status phase failed!\n"); - dev->status = -1; - } - } else { - PDEBUG(0, "setup phase failed!\n"); - dev->status = -1; - } - - dev->act_len = done; - - return done; -} - -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len, int interval) -{ - PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe, - buffer, len, interval); - return -1; -} - -/* - * SL811 Virtual Root Hub - */ - -/* Device descriptor */ -static __u8 sl811_rh_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x10, /* __u16 bcdUSB; v1.1 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x02, /* __u8 iProduct; */ - 0x01, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 sl811_rh_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, - 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __u16 ep_wMaxPacketSize; */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -/* root hub class descriptor*/ -static __u8 sl811_rh_hub_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x01, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x50, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -/* - * helper routine for returning string descriptors in UTF-16LE - * input can actually be ISO-8859-1; ASCII is its 7-bit subset - */ -static int ascii2utf (char *s, u8 *utf, int utfmax) -{ - int retval; - - for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *s++; - *utf++ = 0; - } - return retval; -} - -/* - * root_hub_string is used by each host controller's root hub code, - * so that they're identified consistently throughout the system. - */ -static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) -{ - char buf [30]; - - /* assert (len > (2 * (sizeof (buf) + 1))); - assert (strlen (type) <= 8);*/ - - /* language ids */ - if (id == 0) { - *data++ = 4; *data++ = 3; /* 4 bytes data */ - *data++ = 0; *data++ = 0; /* some language id */ - return 4; - - /* serial number */ - } else if (id == 1) { - sprintf (buf, "%#x", serial); - - /* product description */ - } else if (id == 2) { - sprintf (buf, "USB %s Root Hub", type); - - /* id 3 == vendor description */ - - /* unsupported IDs --> "stall" */ - } else - return 0; - - ascii2utf (buf, data + 2, len - 2); - data [0] = 2 + strlen(buf) * 2; - data [1] = 3; - return data [0]; -} - -/* helper macro */ -#define OK(x) len = (x); break - -/* - * This function handles all USB request to the the virtual root hub - */ -static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, - void *data, int buf_len, struct devrequest *cmd) -{ - __u8 data_buf[16]; - __u8 *bufp = data_buf; - int len = 0; - int status = 0; - - __u16 bmRType_bReq; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - - if (usb_pipeint(pipe)) { - PDEBUG(0, "interrupt transfer unimplemented!\n"); - return 0; - } - - bmRType_bReq = cmd->requesttype | (cmd->request << 8); - wValue = le16_to_cpu (cmd->value); - wIndex = le16_to_cpu (cmd->index); - wLength = le16_to_cpu (cmd->length); - - PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n", - bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength); - - /* Request Destination: - without flags: Device, - USB_RECIP_INTERFACE: interface, - USB_RECIP_ENDPOINT: endpoint, - USB_TYPE_CLASS means HUB here, - USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here - */ - switch (bmRType_bReq) { - case RH_GET_STATUS: - *(__u16 *)bufp = cpu_to_le16(1); - OK(2); - - case RH_GET_STATUS | USB_RECIP_INTERFACE: - *(__u16 *)bufp = cpu_to_le16(0); - OK(2); - - case RH_GET_STATUS | USB_RECIP_ENDPOINT: - *(__u16 *)bufp = cpu_to_le16(0); - OK(2); - - case RH_GET_STATUS | USB_TYPE_CLASS: - *(__u32 *)bufp = cpu_to_le32(0); - OK(4); - - case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS: - *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus); - OK(4); - - case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT: - switch (wValue) { - case 1: - OK(0); - } - break; - - case RH_CLEAR_FEATURE | USB_TYPE_CLASS: - switch (wValue) { - case C_HUB_LOCAL_POWER: - OK(0); - - case C_HUB_OVER_CURRENT: - OK(0); - } - break; - - case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE; - OK(0); - - case USB_PORT_FEAT_SUSPEND: - rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND; - OK(0); - - case USB_PORT_FEAT_POWER: - rh_status.wPortStatus &= ~USB_PORT_STAT_POWER; - OK(0); - - case USB_PORT_FEAT_C_CONNECTION: - rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION; - OK(0); - - case USB_PORT_FEAT_C_ENABLE: - rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE; - OK(0); - - case USB_PORT_FEAT_C_SUSPEND: - rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND; - OK(0); - - case USB_PORT_FEAT_C_OVER_CURRENT: - rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT; - OK(0); - - case USB_PORT_FEAT_C_RESET: - rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET; - OK(0); - } - break; - - case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: - switch (wValue) { - case USB_PORT_FEAT_SUSPEND: - rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND; - OK(0); - - case USB_PORT_FEAT_RESET: - rh_status.wPortStatus |= USB_PORT_STAT_RESET; - rh_status.wPortChange = 0; - rh_status.wPortChange |= USB_PORT_STAT_C_RESET; - rh_status.wPortStatus &= ~USB_PORT_STAT_RESET; - rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; - OK(0); - - case USB_PORT_FEAT_POWER: - rh_status.wPortStatus |= USB_PORT_STAT_POWER; - OK(0); - - case USB_PORT_FEAT_ENABLE: - rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; - OK(0); - } - break; - - case RH_SET_ADDRESS: - root_hub_devnum = wValue; - OK(0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case USB_DT_DEVICE: - len = sizeof(sl811_rh_dev_des); - bufp = sl811_rh_dev_des; - OK(len); - - case USB_DT_CONFIG: - len = sizeof(sl811_rh_config_des); - bufp = sl811_rh_config_des; - OK(len); - - case USB_DT_STRING: - len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength); - if (len > 0) { - bufp = data; - OK(len); - } - - default: - status = -32; - } - break; - - case RH_GET_DESCRIPTOR | USB_TYPE_CLASS: - len = sizeof(sl811_rh_hub_des); - bufp = sl811_rh_hub_des; - OK(len); - - case RH_GET_CONFIGURATION: - bufp[0] = 0x01; - OK(1); - - case RH_SET_CONFIGURATION: - OK(0); - - default: - PDEBUG(1, "unsupported root hub command\n"); - status = -32; - } - - len = min(len, buf_len); - if (data != bufp) - memcpy(data, bufp, len); - - PDEBUG(5, "len = %d, status = %d\n", len, status); - - usb_dev->status = status; - usb_dev->act_len = len; - - return status == 0 ? len : status; -} - -#endif /* CONFIG_USB_SL811HS */ diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile new file mode 100644 index 0000000000..f8ea167b12 --- /dev/null +++ b/drivers/usb/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libusb.a + +COBJS-y += isp116x-hcd.o +COBJS-y += sl811_usb.o +COBJS-y += usb_ohci.o +COBJS-y += usbdcore.o +COBJS-y += usbdcore_ep0.o +COBJS-y += usbdcore_mpc8xx.o +COBJS-y += usbdcore_omap1510.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/usb/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c new file mode 100644 index 0000000000..b21af10d0b --- /dev/null +++ b/drivers/usb/isp116x-hcd.c @@ -0,0 +1,1445 @@ +/* + * ISP116x HCD (Host Controller Driver) for u-boot. + * + * Copyright (C) 2006-2007 Rodolfo Giometti + * Copyright (C) 2006-2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c" + * (original copyright message follows): + * + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This code is based on linux driver for sl811hs chip, source at + * drivers/usb/host/sl811.c: + * + * SL811 Host Controller Interface driver for USB. + * + * Copyright (c) 2003/06, Courage Co., Ltd. + * + * Based on: + * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, + * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, + * Adam Richter, Gregory P. Smith; + * 2.Original SL811 driver (hc_sl811.o) by Pei Liu + * 3.Rewrited as sl811.o by Yin Aihua + * + * [[GNU/GPL disclaimer]] + * + * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c" + * (original copyright message follows): + * + * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00. + * + * (C) Copyright 2003 + * Gary Jennejohn, DENX Software Engineering + * + * [[GNU/GPL disclaimer]] + * + * Note: Part of this code has been derived from linux + */ + +#include + +#ifdef CONFIG_USB_ISP116X_HCD +#include +#include +#include +#include + +/* + * ISP116x chips require certain delays between accesses to its + * registers. The following timing options exist. + * + * 1. Configure your memory controller (the best) + * 2. Use ndelay (easiest, poorest). For that, enable the following macro. + * + * Value is in microseconds. + */ +#ifdef ISP116X_HCD_USE_UDELAY +#define UDELAY 1 +#endif + +/* + * On some (slowly?) machines an extra delay after data packing into + * controller's FIFOs is required, * otherwise you may get the following + * error: + * + * uboot> usb start + * (Re)start USB... + * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT + * isp116x: isp116x_submit_job: ****** FIFO not ready! ****** + * + * USB device not responding, giving up (status=4) + * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** + * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** + * isp116x: isp116x_submit_job: ****** FIFO not empty! ****** + * 3 USB Device(s) found + * scanning bus for storage devices... 0 Storage Device(s) found + * + * Value is in milliseconds. + */ +#ifdef ISP116X_HCD_USE_EXTRA_DELAY +#define EXTRA_DELAY 2 +#endif + +/* + * Enable the following defines if you wish enable debugging messages. + */ +#undef DEBUG /* enable debugging messages */ +#undef TRACE /* enable tracing code */ +#undef VERBOSE /* verbose debugging messages */ + +#include "isp116x.h" + +#define DRIVER_VERSION "08 Jan 2007" +static const char hcd_name[] = "isp116x-hcd"; + +struct isp116x isp116x_dev; +struct isp116x_platform_data isp116x_board; +static int got_rhsc; /* root hub status change */ +struct usb_device *devgone; /* device which was disconnected */ +static int rh_devnum; /* address of Root Hub endpoint */ + +/* ------------------------------------------------------------------------- */ + +#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL)) +#define min_t(type,x,y) \ + ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; }) + +/* ------------------------------------------------------------------------- */ + +static int isp116x_reset(struct isp116x *isp116x); + +/* --- Debugging functions ------------------------------------------------- */ + +#define isp116x_show_reg(d, r) { \ + if ((r) < 0x20) { \ + DBG("%-12s[%02x]: %08x", #r, \ + r, isp116x_read_reg32(d, r)); \ + } else { \ + DBG("%-12s[%02x]: %04x", #r, \ + r, isp116x_read_reg16(d, r)); \ + } \ +} + +#define isp116x_show_regs(d) { \ + isp116x_show_reg(d, HCREVISION); \ + isp116x_show_reg(d, HCCONTROL); \ + isp116x_show_reg(d, HCCMDSTAT); \ + isp116x_show_reg(d, HCINTSTAT); \ + isp116x_show_reg(d, HCINTENB); \ + isp116x_show_reg(d, HCFMINTVL); \ + isp116x_show_reg(d, HCFMREM); \ + isp116x_show_reg(d, HCFMNUM); \ + isp116x_show_reg(d, HCLSTHRESH); \ + isp116x_show_reg(d, HCRHDESCA); \ + isp116x_show_reg(d, HCRHDESCB); \ + isp116x_show_reg(d, HCRHSTATUS); \ + isp116x_show_reg(d, HCRHPORT1); \ + isp116x_show_reg(d, HCRHPORT2); \ + isp116x_show_reg(d, HCHWCFG); \ + isp116x_show_reg(d, HCDMACFG); \ + isp116x_show_reg(d, HCXFERCTR); \ + isp116x_show_reg(d, HCuPINT); \ + isp116x_show_reg(d, HCuPINTENB); \ + isp116x_show_reg(d, HCCHIPID); \ + isp116x_show_reg(d, HCSCRATCH); \ + isp116x_show_reg(d, HCITLBUFLEN); \ + isp116x_show_reg(d, HCATLBUFLEN); \ + isp116x_show_reg(d, HCBUFSTAT); \ + isp116x_show_reg(d, HCRDITL0LEN); \ + isp116x_show_reg(d, HCRDITL1LEN); \ +} + +#if defined(TRACE) + +static int isp116x_get_current_frame_number(struct usb_device *usb_dev) +{ + struct isp116x *isp116x = &isp116x_dev; + + return isp116x_read_reg32(isp116x, HCFMNUM); +} + +static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, char *str) +{ +#if defined(VERBOSE) + int i; +#endif + + DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx", + str, + isp116x_get_current_frame_number(dev), + usb_pipedevice(pipe), + usb_pipeendpoint(pipe), + usb_pipeout(pipe) ? 'O' : 'I', + usb_pipetype(pipe) < 2 ? + (usb_pipeint(pipe) ? + "INTR" : "ISOC") : + (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status); +#if defined(VERBOSE) + if (len > 0 && buffer) { + printf(__FILE__ ": data(%d):", len); + for (i = 0; i < 16 && i < len; i++) + printf(" %02x", ((__u8 *) buffer)[i]); + printf("%s\n", i < len ? "..." : ""); + } +#endif +} + +#define PTD_DIR_STR(ptd) ({char __c; \ + switch(PTD_GET_DIR(ptd)){ \ + case 0: __c = 's'; break; \ + case 1: __c = 'o'; break; \ + default: __c = 'i'; break; \ + }; __c;}) + +/* + Dump PTD info. The code documents the format + perfectly, right :) +*/ +static inline void dump_ptd(struct ptd *ptd) +{ +#if defined(VERBOSE) + int k; +#endif + + DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x", + PTD_GET_CC(ptd), + PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd), + PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd), + PTD_GET_TOGGLE(ptd), + PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd)); +#if defined(VERBOSE) + printf("isp116x: %s: PTD(byte): ", __FUNCTION__); + for (k = 0; k < sizeof(struct ptd); ++k) + printf("%02x ", ((u8 *) ptd)[k]); + printf("\n"); +#endif +} + +static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type) +{ +#if defined(VERBOSE) + int k; + + if (type == 0 /* 0ut data */ ) { + printf("isp116x: %s: out data: ", __FUNCTION__); + for (k = 0; k < PTD_GET_LEN(ptd); ++k) + printf("%02x ", ((u8 *) buf)[k]); + printf("\n"); + } + if (type == 1 /* 1n data */ ) { + printf("isp116x: %s: in data: ", __FUNCTION__); + for (k = 0; k < PTD_GET_COUNT(ptd); ++k) + printf("%02x ", ((u8 *) buf)[k]); + printf("\n"); + } + + if (PTD_GET_LAST(ptd)) + DBG("--- last PTD ---"); +#endif +} + +#else + +#define dump_msg(dev, pipe, buffer, len, str) do { } while (0) +#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0) + +#define dump_ptd(ptd) do {} while (0) +#define dump_ptd_data(ptd, buf, type) do {} while (0) + +#endif + +/* --- Virtual Root Hub ---------------------------------------------------- */ + +/* Device descriptor */ +static __u8 root_hub_dev_des[] = { + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x10, /* __u16 bcdUSB; v1.1 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x00, /* __u8 iManufacturer; */ + 0x01, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* Configuration descriptor */ +static __u8 root_hub_config_des[] = { + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ + 0x02, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + +static unsigned char root_hub_str_index0[] = { + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = { + 0x22, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'S', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'P', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + '1', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + '1', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + '6', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'x', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + +/* + * Hub class-specific descriptor is constructed dynamically + */ + +/* --- Virtual root hub management functions ------------------------------- */ + +static int rh_check_port_status(struct isp116x *isp116x) +{ + u32 temp, ndp, i; + int res; + + res = -1; + temp = isp116x_read_reg32(isp116x, HCRHSTATUS); + ndp = (temp & RH_A_NDP); + for (i = 0; i < ndp; i++) { + temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i); + /* check for a device disconnect */ + if (((temp & (RH_PS_PESC | RH_PS_CSC)) == + (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) { + res = i; + break; + } + } + return res; +} + +/* --- HC management functions --------------------------------------------- */ + +/* Write len bytes to fifo, pad till 32-bit boundary + */ +static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len) +{ + u8 *dp = (u8 *) buf; + u16 *dp2 = (u16 *) buf; + u16 w; + int quot = len % 4; + + if ((unsigned long)dp2 & 1) { + /* not aligned */ + for (; len > 1; len -= 2) { + w = *dp++; + w |= *dp++ << 8; + isp116x_raw_write_data16(isp116x, w); + } + if (len) + isp116x_write_data16(isp116x, (u16) * dp); + } else { + /* aligned */ + for (; len > 1; len -= 2) + isp116x_raw_write_data16(isp116x, *dp2++); + if (len) + isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2)); + } + if (quot == 1 || quot == 2) + isp116x_raw_write_data16(isp116x, 0); +} + +/* Read len bytes from fifo and then read till 32-bit boundary + */ +static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len) +{ + u8 *dp = (u8 *) buf; + u16 *dp2 = (u16 *) buf; + u16 w; + int quot = len % 4; + + if ((unsigned long)dp2 & 1) { + /* not aligned */ + for (; len > 1; len -= 2) { + w = isp116x_raw_read_data16(isp116x); + *dp++ = w & 0xff; + *dp++ = (w >> 8) & 0xff; + } + if (len) + *dp = 0xff & isp116x_read_data16(isp116x); + } else { + /* aligned */ + for (; len > 1; len -= 2) + *dp2++ = isp116x_raw_read_data16(isp116x); + if (len) + *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x); + } + if (quot == 1 || quot == 2) + isp116x_raw_read_data16(isp116x); +} + +/* Write PTD's and data for scheduled transfers into the fifo ram. + * Fifo must be empty and ready */ +static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev, + unsigned long pipe, struct ptd *ptd, int n, void *data, + int len) +{ + int buflen = n * sizeof(struct ptd) + len; + int i, done; + + DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen); + + isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); + isp116x_write_reg16(isp116x, HCXFERCTR, buflen); + isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET); + + done = 0; + for (i = 0; i < n; i++) { + DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i])); + + dump_ptd(&ptd[i]); + isp116x_write_data16(isp116x, ptd[i].count); + isp116x_write_data16(isp116x, ptd[i].mps); + isp116x_write_data16(isp116x, ptd[i].len); + isp116x_write_data16(isp116x, ptd[i].faddr); + + dump_ptd_data(&ptd[i], (__u8 *) data + done, 0); + write_ptddata_to_fifo(isp116x, + (__u8 *) data + done, + PTD_GET_LEN(&ptd[i])); + + done += PTD_GET_LEN(&ptd[i]); + } +} + +/* Read the processed PTD's and data from fifo ram back to URBs' buffers. + * Fifo must be full and done */ +static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev, + unsigned long pipe, struct ptd *ptd, int n, void *data, + int len) +{ + int buflen = n * sizeof(struct ptd) + len; + int i, done, cc, ret; + + isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); + isp116x_write_reg16(isp116x, HCXFERCTR, buflen); + isp116x_write_addr(isp116x, HCATLPORT); + + ret = TD_CC_NOERROR; + done = 0; + for (i = 0; i < n; i++) { + DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i])); + + ptd[i].count = isp116x_read_data16(isp116x); + ptd[i].mps = isp116x_read_data16(isp116x); + ptd[i].len = isp116x_read_data16(isp116x); + ptd[i].faddr = isp116x_read_data16(isp116x); + dump_ptd(&ptd[i]); + + read_ptddata_from_fifo(isp116x, + (__u8 *) data + done, + PTD_GET_LEN(&ptd[i])); + dump_ptd_data(&ptd[i], (__u8 *) data + done, 1); + + done += PTD_GET_LEN(&ptd[i]); + + cc = PTD_GET_CC(&ptd[i]); + + /* Data underrun means basically that we had more buffer space than + * the function had data. It is perfectly normal but upper levels have + * to know how much we actually transferred. + */ + if (cc == TD_NOTACCESSED || + (cc != TD_CC_NOERROR && (ret == TD_CC_NOERROR || ret == TD_DATAUNDERRUN))) + ret = cc; + } + + DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen); + + return ret; +} + +/* Interrupt handling + */ +static int isp116x_interrupt(struct isp116x *isp116x) +{ + u16 irqstat; + u32 intstat; + int ret = 0; + + isp116x_write_reg16(isp116x, HCuPINTENB, 0); + irqstat = isp116x_read_reg16(isp116x, HCuPINT); + isp116x_write_reg16(isp116x, HCuPINT, irqstat); + DBG(">>>>>> irqstat %x <<<<<<", irqstat); + + if (irqstat & HCuPINT_ATL) { + DBG(">>>>>> HCuPINT_ATL <<<<<<"); + udelay(500); + ret = 1; + } + + if (irqstat & HCuPINT_OPR) { + intstat = isp116x_read_reg32(isp116x, HCINTSTAT); + isp116x_write_reg32(isp116x, HCINTSTAT, intstat); + DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat); + + if (intstat & HCINT_UE) { + ERR("unrecoverable error, controller disabled"); + + /* FIXME: be optimistic, hope that bug won't repeat + * often. Make some non-interrupt context restart the + * controller. Count and limit the retries though; + * either hardware or software errors can go forever... + */ + isp116x_reset(isp116x); + ret = -1; + return -1; + } + + if (intstat & HCINT_RHSC) { + got_rhsc = 1; + ret = 1; + /* When root hub or any of its ports is going + to come out of suspend, it may take more + than 10ms for status bits to stabilize. */ + wait_ms(20); + } + + if (intstat & HCINT_SO) { + ERR("schedule overrun"); + ret = -1; + } + + irqstat &= ~HCuPINT_OPR; + } + + return ret; +} + +/* With one PTD we can transfer almost 1K in one go; + * HC does the splitting into endpoint digestible transactions + */ +struct ptd ptd[1]; + +static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe) +{ + unsigned mpck = usb_maxpacket(dev, pipe); + + /* One PTD can transfer 1023 bytes but try to always + * transfer multiples of endpoint buffer size + */ + return 1023 / mpck * mpck; +} + +/* Do an USB transfer + */ +static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe, + int dir, void *buffer, int len) +{ + struct isp116x *isp116x = &isp116x_dev; + int type = usb_pipetype(pipe); + int epnum = usb_pipeendpoint(pipe); + int max = usb_maxpacket(dev, pipe); + int dir_out = usb_pipeout(pipe); + int speed_low = usb_pipeslow(pipe); + int i, done = 0, stat, timeout, cc; + + /* 500 frames or 0.5s timeout when function is busy and NAKs transactions for a while */ + int retries = 500; + + DBG("------------------------------------------------"); + dump_msg(dev, pipe, buffer, len, "SUBMIT"); + DBG("------------------------------------------------"); + + if (len >= 1024) { + ERR("Too big job"); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + if (isp116x->disabled) { + ERR("EPIPE"); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + /* device pulled? Shortcut the action. */ + if (devgone == dev) { + ERR("ENODEV"); + dev->status = USB_ST_CRC_ERR; + return USB_ST_CRC_ERR; + } + + if (!max) { + ERR("pipesize for pipe %lx is zero", pipe); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + if (type == PIPE_ISOCHRONOUS) { + ERR("isochronous transfers not supported"); + dev->status = USB_ST_CRC_ERR; + return -1; + } + + /* FIFO not empty? */ + if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) { + ERR("****** FIFO not empty! ******"); + dev->status = USB_ST_BUF_ERR; + return -1; + } + + retry: + isp116x_write_reg32(isp116x, HCINTSTAT, 0xff); + + /* Prepare the PTD data */ + ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | + PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out)); + ptd->mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum) | PTD_LAST_MSK; + ptd->len = PTD_LEN(len) | PTD_DIR(dir); + ptd->faddr = PTD_FA(usb_pipedevice(pipe)); + +retry_same: + /* Pack data into FIFO ram */ + pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len); +#ifdef EXTRA_DELAY + wait_ms(EXTRA_DELAY); +#endif + + /* Start the data transfer */ + + /* Allow more time for a BULK device to react - some are slow */ + if (usb_pipetype(pipe) == PIPE_BULK) + timeout = 5000; + else + timeout = 100; + + /* Wait for it to complete */ + for (;;) { + /* Check whether the controller is done */ + stat = isp116x_interrupt(isp116x); + + if (stat < 0) { + dev->status = USB_ST_CRC_ERR; + break; + } + if (stat > 0) + break; + + /* Check the timeout */ + if (--timeout) + udelay(1); + else { + ERR("CTL:TIMEOUT "); + stat = USB_ST_CRC_ERR; + break; + } + } + + /* We got an Root Hub Status Change interrupt */ + if (got_rhsc) { + isp116x_show_regs(isp116x); + + got_rhsc = 0; + + /* Abuse timeout */ + timeout = rh_check_port_status(isp116x); + if (timeout >= 0) { + /* + * FIXME! NOTE! AAAARGH! + * This is potentially dangerous because it assumes + * that only one device is ever plugged in! + */ + devgone = dev; + } + } + + /* Ok, now we can read transfer status */ + + /* FIFO not ready? */ + if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) { + ERR("****** FIFO not ready! ******"); + dev->status = USB_ST_BUF_ERR; + return -1; + } + + /* Unpack data from FIFO ram */ + cc = unpack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len); + + i = PTD_GET_COUNT(ptd); + done += i; + buffer += i; + len -= i; + + /* There was some kind of real problem; Prepare the PTD again + * and retry from the failed transaction on + */ + if (cc && cc != TD_NOTACCESSED && cc != TD_DATAUNDERRUN) { + if (retries >= 100) { + retries -= 100; + /* The chip will have toggled the toggle bit for the failed + * transaction too. We have to toggle it back. + */ + usb_settoggle(dev, epnum, dir_out, !PTD_GET_TOGGLE(ptd)); + goto retry; + } + } + /* "Normal" errors; TD_NOTACCESSED would mean in effect that the function have NAKed + * the transactions from the first on for the whole frame. It may be busy and we retry + * with the same PTD. PTD_ACTIVE (and not TD_NOTACCESSED) would mean that some of the + * PTD didn't make it because the function was busy or the frame ended before the PTD + * finished. We prepare the rest of the data and try again. + */ + else if (cc == TD_NOTACCESSED || PTD_GET_ACTIVE(ptd) || (cc != TD_DATAUNDERRUN && PTD_GET_COUNT(ptd) < PTD_GET_LEN(ptd))) { + if (retries) { + --retries; + if (cc == TD_NOTACCESSED && PTD_GET_ACTIVE(ptd) && !PTD_GET_COUNT(ptd)) goto retry_same; + usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd)); + goto retry; + } + } + + if (cc != TD_CC_NOERROR && cc != TD_DATAUNDERRUN) { + DBG("****** completition code error %x ******", cc); + switch (cc) { + case TD_CC_BITSTUFFING: + dev->status = USB_ST_BIT_ERR; + break; + case TD_CC_STALL: + dev->status = USB_ST_STALLED; + break; + case TD_BUFFEROVERRUN: + case TD_BUFFERUNDERRUN: + dev->status = USB_ST_BUF_ERR; + break; + default: + dev->status = USB_ST_CRC_ERR; + } + return -cc; + } + else usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd)); + + dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)"); + + dev->status = 0; + return done; +} + +/* Adapted from au1x00_usb_ohci.c + */ +static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, + struct devrequest *cmd) +{ + struct isp116x *isp116x = &isp116x_dev; + u32 tmp = 0; + + int leni = transfer_len; + int len = 0; + int stat = 0; + u32 datab[4]; + u8 *data_buf = (u8 *) datab; + u16 bmRType_bReq; + u16 wValue; + u16 wIndex; + u16 wLength; + + if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { + INFO("Root-Hub submit IRQ: NOT implemented"); + return 0; + } + + bmRType_bReq = cmd->requesttype | (cmd->request << 8); + wValue = swap_16(cmd->value); + wIndex = swap_16(cmd->index); + wLength = swap_16(cmd->length); + + DBG("--- HUB ----------------------------------------"); + DBG("submit rh urb, req=%x val=%#x index=%#x len=%d", + bmRType_bReq, wValue, wIndex, wLength); + dump_msg(dev, pipe, buffer, transfer_len, "RH"); + DBG("------------------------------------------------"); + + switch (bmRType_bReq) { + case RH_GET_STATUS: + DBG("RH_GET_STATUS"); + + *(__u16 *) data_buf = swap_16(1); + len = 2; + break; + + case RH_GET_STATUS | RH_INTERFACE: + DBG("RH_GET_STATUS | RH_INTERFACE"); + + *(__u16 *) data_buf = swap_16(0); + len = 2; + break; + + case RH_GET_STATUS | RH_ENDPOINT: + DBG("RH_GET_STATUS | RH_ENDPOINT"); + + *(__u16 *) data_buf = swap_16(0); + len = 2; + break; + + case RH_GET_STATUS | RH_CLASS: + DBG("RH_GET_STATUS | RH_CLASS"); + + tmp = isp116x_read_reg32(isp116x, HCRHSTATUS); + + *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE)); + len = 4; + break; + + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS"); + + tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1); + *(__u32 *) data_buf = swap_32(tmp); + isp116x_show_regs(isp116x); + len = 4; + break; + + case RH_CLEAR_FEATURE | RH_ENDPOINT: + DBG("RH_CLEAR_FEATURE | RH_ENDPOINT"); + + switch (wValue) { + case RH_ENDPOINT_STALL: + DBG("C_HUB_ENDPOINT_STALL"); + len = 0; + break; + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + DBG("RH_CLEAR_FEATURE | RH_CLASS"); + + switch (wValue) { + case RH_C_HUB_LOCAL_POWER: + DBG("C_HUB_LOCAL_POWER"); + len = 0; + break; + + case RH_C_HUB_OVER_CURRENT: + DBG("C_HUB_OVER_CURRENT"); + isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC); + len = 0; + break; + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS"); + + switch (wValue) { + case RH_PORT_ENABLE: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_CCS); + len = 0; + break; + + case RH_PORT_SUSPEND: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_POCI); + len = 0; + break; + + case RH_PORT_POWER: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_LSDA); + len = 0; + break; + + case RH_C_PORT_CONNECTION: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_CSC); + len = 0; + break; + + case RH_C_PORT_ENABLE: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PESC); + len = 0; + break; + + case RH_C_PORT_SUSPEND: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PSSC); + len = 0; + break; + + case RH_C_PORT_OVER_CURRENT: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_POCI); + len = 0; + break; + + case RH_C_PORT_RESET: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PRSC); + len = 0; + break; + + default: + ERR("invalid wValue"); + stat = USB_ST_STALLED; + } + + isp116x_show_regs(isp116x); + + break; + + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS"); + + switch (wValue) { + case RH_PORT_SUSPEND: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PSS); + len = 0; + break; + + case RH_PORT_RESET: + /* Spin until any current reset finishes */ + while (1) { + tmp = + isp116x_read_reg32(isp116x, + HCRHPORT1 + wIndex - 1); + if (!(tmp & RH_PS_PRS)) + break; + wait_ms(1); + } + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PRS); + wait_ms(10); + + len = 0; + break; + + case RH_PORT_POWER: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PPS); + len = 0; + break; + + case RH_PORT_ENABLE: + isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1, + RH_PS_PES); + len = 0; + break; + + default: + ERR("invalid wValue"); + stat = USB_ST_STALLED; + } + + isp116x_show_regs(isp116x); + + break; + + case RH_SET_ADDRESS: + DBG("RH_SET_ADDRESS"); + + rh_devnum = wValue; + len = 0; + break; + + case RH_GET_DESCRIPTOR: + DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength); + + switch (wValue) { + case (USB_DT_DEVICE << 8): /* device descriptor */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_dev_des), + wLength)); + data_buf = root_hub_dev_des; + break; + + case (USB_DT_CONFIG << 8): /* configuration descriptor */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_config_des), + wLength)); + data_buf = root_hub_config_des; + break; + + case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_str_index0), + wLength)); + data_buf = root_hub_str_index0; + break; + + case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */ + len = min_t(unsigned int, + leni, min_t(unsigned int, + sizeof(root_hub_str_index1), + wLength)); + data_buf = root_hub_str_index1; + break; + + default: + ERR("invalid wValue"); + stat = USB_ST_STALLED; + } + + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + DBG("RH_GET_DESCRIPTOR | RH_CLASS"); + + tmp = isp116x_read_reg32(isp116x, HCRHDESCA); + + data_buf[0] = 0x09; /* min length; */ + data_buf[1] = 0x29; + data_buf[2] = tmp & RH_A_NDP; + data_buf[3] = 0; + if (tmp & RH_A_PSM) /* per-port power switching? */ + data_buf[3] |= 0x01; + if (tmp & RH_A_NOCP) /* no overcurrent reporting? */ + data_buf[3] |= 0x10; + else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */ + data_buf[3] |= 0x08; + + /* Corresponds to data_buf[4-7] */ + datab[1] = 0; + data_buf[5] = (tmp & RH_A_POTPGT) >> 24; + + tmp = isp116x_read_reg32(isp116x, HCRHDESCB); + + data_buf[7] = tmp & RH_B_DR; + if (data_buf[2] < 7) + data_buf[8] = 0xff; + else { + data_buf[0] += 2; + data_buf[8] = (tmp & RH_B_DR) >> 8; + data_buf[10] = data_buf[9] = 0xff; + } + + len = min_t(unsigned int, leni, + min_t(unsigned int, data_buf[0], wLength)); + break; + + case RH_GET_CONFIGURATION: + DBG("RH_GET_CONFIGURATION"); + + *(__u8 *) data_buf = 0x01; + len = 1; + break; + + case RH_SET_CONFIGURATION: + DBG("RH_SET_CONFIGURATION"); + + isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC); + len = 0; + break; + + default: + ERR("*** *** *** unsupported root hub command *** *** ***"); + stat = USB_ST_STALLED; + } + + len = min_t(int, len, leni); + if (buffer != data_buf) + memcpy(buffer, data_buf, len); + + dev->act_len = len; + dev->status = stat; + DBG("dev act_len %d, status %d", dev->act_len, dev->status); + + dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)"); + + return stat; +} + +/* --- Transfer functions -------------------------------------------------- */ + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, int interval) +{ + DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d", + dev, pipe, buffer, len, interval); + + return -1; +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, struct devrequest *setup) +{ + int devnum = usb_pipedevice(pipe); + int epnum = usb_pipeendpoint(pipe); + int max = max_transfer_len(dev, pipe); + int dir_in = usb_pipein(pipe); + int done, ret; + + /* Control message is for the HUB? */ + if (devnum == rh_devnum) + return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup); + + /* Ok, no HUB message so send the message to the device */ + + /* Setup phase */ + DBG("--- SETUP PHASE --------------------------------"); + usb_settoggle(dev, epnum, 1, 0); + ret = isp116x_submit_job(dev, pipe, + PTD_DIR_SETUP, + setup, sizeof(struct devrequest)); + if (ret < 0) { + DBG("control setup phase error (ret = %d", ret); + return -1; + } + + /* Data phase */ + DBG("--- DATA PHASE ---------------------------------"); + done = 0; + usb_settoggle(dev, epnum, !dir_in, 1); + while (done < len) { + ret = isp116x_submit_job(dev, pipe, + dir_in ? PTD_DIR_IN : PTD_DIR_OUT, + (__u8 *) buffer + done, + max > len - done ? len - done : max); + if (ret < 0) { + DBG("control data phase error (ret = %d)", ret); + return -1; + } + done += ret; + + if (dir_in && ret < max) /* short packet */ + break; + } + + /* Status phase */ + DBG("--- STATUS PHASE -------------------------------"); + usb_settoggle(dev, epnum, !dir_in, 1); + ret = isp116x_submit_job(dev, pipe, + !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0); + if (ret < 0) { + DBG("control status phase error (ret = %d", ret); + return -1; + } + + dev->act_len = done; + + dump_msg(dev, pipe, buffer, len, "DEV(ret)"); + + return done; +} + +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len) +{ + int dir_out = usb_pipeout(pipe); + int max = max_transfer_len(dev, pipe); + int done, ret; + + DBG("--- BULK ---------------------------------------"); + DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d", + usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); + + done = 0; + while (done < len) { + ret = isp116x_submit_job(dev, pipe, + !dir_out ? PTD_DIR_IN : PTD_DIR_OUT, + (__u8 *) buffer + done, + max > len - done ? len - done : max); + if (ret < 0) { + DBG("error on bulk message (ret = %d)", ret); + return -1; + } + + done += ret; + + if (!dir_out && ret < max) /* short packet */ + break; + } + + dev->act_len = done; + + return 0; +} + +/* --- Basic functions ----------------------------------------------------- */ + +static int isp116x_sw_reset(struct isp116x *isp116x) +{ + int retries = 15; + int ret = 0; + + DBG(""); + + isp116x->disabled = 1; + + isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC); + isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR); + while (--retries) { + /* It usually resets within 1 ms */ + wait_ms(1); + if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR)) + break; + } + if (!retries) { + ERR("software reset timeout"); + ret = -1; + } + return ret; +} + +static int isp116x_reset(struct isp116x *isp116x) +{ + unsigned long t; + u16 clkrdy = 0; + int ret, timeout = 15 /* ms */ ; + + DBG(""); + + ret = isp116x_sw_reset(isp116x); + if (ret) + return ret; + + for (t = 0; t < timeout; t++) { + clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY; + if (clkrdy) + break; + wait_ms(1); + } + if (!clkrdy) { + ERR("clock not ready after %dms", timeout); + /* After sw_reset the clock won't report to be ready, if + H_WAKEUP pin is high. */ + ERR("please make sure that the H_WAKEUP pin is pulled low!"); + ret = -1; + } + return ret; +} + +static void isp116x_stop(struct isp116x *isp116x) +{ + u32 val; + + DBG(""); + + isp116x_write_reg16(isp116x, HCuPINTENB, 0); + + /* Switch off ports' power, some devices don't come up + after next 'start' without this */ + val = isp116x_read_reg32(isp116x, HCRHDESCA); + val &= ~(RH_A_NPS | RH_A_PSM); + isp116x_write_reg32(isp116x, HCRHDESCA, val); + isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS); + + isp116x_sw_reset(isp116x); +} + +/* + * Configure the chip. The chip must be successfully reset by now. + */ +static int isp116x_start(struct isp116x *isp116x) +{ + struct isp116x_platform_data *board = isp116x->board; + u32 val; + + DBG(""); + + /* Clear interrupt status and disable all interrupt sources */ + isp116x_write_reg16(isp116x, HCuPINT, 0xff); + isp116x_write_reg16(isp116x, HCuPINTENB, 0); + + isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE); + isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE); + + /* Hardware configuration */ + val = HCHWCFG_DBWIDTH(1); + if (board->sel15Kres) + val |= HCHWCFG_15KRSEL; + /* Remote wakeup won't work without working clock */ + if (board->remote_wakeup_enable) + val |= HCHWCFG_CLKNOTSTOP; + if (board->oc_enable) + val |= HCHWCFG_ANALOG_OC; + isp116x_write_reg16(isp116x, HCHWCFG, val); + + /* --- Root hub configuration */ + val = (25 << 24) & RH_A_POTPGT; + /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to + be always set. Yet, instead, we request individual port + power switching. */ + val |= RH_A_PSM; + /* Report overcurrent per port */ + val |= RH_A_OCPM; + isp116x_write_reg32(isp116x, HCRHDESCA, val); + isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA); + + val = RH_B_PPCM; + isp116x_write_reg32(isp116x, HCRHDESCB, val); + isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB); + + val = 0; + if (board->remote_wakeup_enable) + val |= RH_HS_DRWE; + isp116x_write_reg32(isp116x, HCRHSTATUS, val); + isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS); + + isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf); + + /* Go operational */ + val = HCCONTROL_USB_OPER; + if (board->remote_wakeup_enable) + val |= HCCONTROL_RWE; + isp116x_write_reg32(isp116x, HCCONTROL, val); + + /* Disable ports to avoid race in device enumeration */ + isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS); + isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS); + + isp116x_show_regs(isp116x); + + isp116x->disabled = 0; + + return 0; +} + +/* --- Init functions ------------------------------------------------------ */ + +int isp116x_check_id(struct isp116x *isp116x) +{ + int val; + + val = isp116x_read_reg16(isp116x, HCCHIPID); + if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) { + ERR("invalid chip ID %04x", val); + return -1; + } + + return 0; +} + +int usb_lowlevel_init(void) +{ + struct isp116x *isp116x = &isp116x_dev; + + DBG(""); + + got_rhsc = rh_devnum = 0; + + /* Init device registers addr */ + isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR; + isp116x->data_reg = (u16 *) ISP116X_HCD_DATA; + + /* Setup specific board settings */ +#ifdef ISP116X_HCD_SEL15kRES + isp116x_board.sel15Kres = 1; +#endif +#ifdef ISP116X_HCD_OC_ENABLE + isp116x_board.oc_enable = 1; +#endif +#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE + isp116x_board.remote_wakeup_enable = 1; +#endif + isp116x->board = &isp116x_board; + + /* Try to get ISP116x silicon chip ID */ + if (isp116x_check_id(isp116x) < 0) + return -1; + + isp116x->disabled = 1; + isp116x->sleeping = 0; + + isp116x_reset(isp116x); + isp116x_start(isp116x); + + return 0; +} + +int usb_lowlevel_stop(void) +{ + struct isp116x *isp116x = &isp116x_dev; + + DBG(""); + + if (!isp116x->disabled) + isp116x_stop(isp116x); + + return 0; +} + +#endif /* CONFIG_USB_ISP116X_HCD */ diff --git a/drivers/usb/isp116x.h b/drivers/usb/isp116x.h new file mode 100644 index 0000000000..a3ce3b582c --- /dev/null +++ b/drivers/usb/isp116x.h @@ -0,0 +1,489 @@ +/* + * ISP116x register declarations and HCD data structures + * + * Copyright (C) 2007 Rodolfo Giometti + * Copyright (C) 2007 Eurotech S.p.A. + * Copyright (C) 2005 Olav Kongas + * Portions: + * Copyright (C) 2004 Lothar Wassmann + * Copyright (C) 2004 Psion Teklogix + * Copyright (C) 2004 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef DEBUG +#define DBG(fmt, args...) \ + printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) +#else +#define DBG(fmt, args...) do {} while (0) +#endif + +#ifdef VERBOSE +# define VDBG DBG +#else +# define VDBG(fmt, args...) do {} while (0) +#endif + +#define ERR(fmt, args...) \ + printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) +#define WARN(fmt, args...) \ + printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) +#define INFO(fmt, args...) \ + printf("isp116x: " fmt "\n" , ## args) + +/* ------------------------------------------------------------------------- */ + +/* us of 1ms frame */ +#define MAX_LOAD_LIMIT 850 + +/* Full speed: max # of bytes to transfer for a single urb + at a time must be < 1024 && must be multiple of 64. + 832 allows transfering 4kiB within 5 frames. */ +#define MAX_TRANSFER_SIZE_FULLSPEED 832 + +/* Low speed: there is no reason to schedule in very big + chunks; often the requested long transfers are for + string descriptors containing short strings. */ +#define MAX_TRANSFER_SIZE_LOWSPEED 64 + +/* Bytetime (us), a rough indication of how much time it + would take to transfer a byte of useful data over USB */ +#define BYTE_TIME_FULLSPEED 1 +#define BYTE_TIME_LOWSPEED 20 + +/* Buffer sizes */ +#define ISP116x_BUF_SIZE 4096 +#define ISP116x_ITL_BUFSIZE 0 +#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE)) + +#define ISP116x_WRITE_OFFSET 0x80 + +/* --- ISP116x registers/bits ---------------------------------------------- */ + +#define HCREVISION 0x00 +#define HCCONTROL 0x01 +#define HCCONTROL_HCFS (3 << 6) /* host controller + functional state */ +#define HCCONTROL_USB_RESET (0 << 6) +#define HCCONTROL_USB_RESUME (1 << 6) +#define HCCONTROL_USB_OPER (2 << 6) +#define HCCONTROL_USB_SUSPEND (3 << 6) +#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */ +#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */ +#define HCCMDSTAT 0x02 +#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */ +#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */ +#define HCINTSTAT 0x03 +#define HCINT_SO (1 << 0) /* scheduling overrun */ +#define HCINT_WDH (1 << 1) /* writeback of done_head */ +#define HCINT_SF (1 << 2) /* start frame */ +#define HCINT_RD (1 << 3) /* resume detect */ +#define HCINT_UE (1 << 4) /* unrecoverable error */ +#define HCINT_FNO (1 << 5) /* frame number overflow */ +#define HCINT_RHSC (1 << 6) /* root hub status change */ +#define HCINT_OC (1 << 30) /* ownership change */ +#define HCINT_MIE (1 << 31) /* master interrupt enable */ +#define HCINTENB 0x04 +#define HCINTDIS 0x05 +#define HCFMINTVL 0x0d +#define HCFMREM 0x0e +#define HCFMNUM 0x0f +#define HCLSTHRESH 0x11 +#define HCRHDESCA 0x12 +#define RH_A_NDP (0x3 << 0) /* # downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* overcurrent protection + mode */ +#define RH_A_NOCP (1 << 12) /* no overcurrent protection */ +#define RH_A_POTPGT (0xff << 24) /* power on -> power good + time */ +#define HCRHDESCB 0x13 +#define RH_B_DR (0xffff << 0) /* device removable flags */ +#define RH_B_PPCM (0xffff << 16) /* port power control mask */ +#define HCRHSTATUS 0x14 +#define RH_HS_LPS (1 << 0) /* local power status */ +#define RH_HS_OCI (1 << 1) /* over current indicator */ +#define RH_HS_DRWE (1 << 15) /* device remote wakeup + enable */ +#define RH_HS_LPSC (1 << 16) /* local power status change */ +#define RH_HS_OCIC (1 << 17) /* over current indicator + change */ +#define RH_HS_CRWE (1 << 31) /* clear remote wakeup + enable */ +#define HCRHPORT1 0x15 +#define RH_PS_CCS (1 << 0) /* current connect status */ +#define RH_PS_PES (1 << 1) /* port enable status */ +#define RH_PS_PSS (1 << 2) /* port suspend status */ +#define RH_PS_POCI (1 << 3) /* port over current + indicator */ +#define RH_PS_PRS (1 << 4) /* port reset status */ +#define RH_PS_PPS (1 << 8) /* port power status */ +#define RH_PS_LSDA (1 << 9) /* low speed device attached */ +#define RH_PS_CSC (1 << 16) /* connect status change */ +#define RH_PS_PESC (1 << 17) /* port enable status change */ +#define RH_PS_PSSC (1 << 18) /* port suspend status + change */ +#define RH_PS_OCIC (1 << 19) /* over current indicator + change */ +#define RH_PS_PRSC (1 << 20) /* port reset status change */ +#define HCRHPORT_CLRMASK (0x1f << 16) +#define HCRHPORT2 0x16 +#define HCHWCFG 0x20 +#define HCHWCFG_15KRSEL (1 << 12) +#define HCHWCFG_CLKNOTSTOP (1 << 11) +#define HCHWCFG_ANALOG_OC (1 << 10) +#define HCHWCFG_DACK_MODE (1 << 8) +#define HCHWCFG_EOT_POL (1 << 7) +#define HCHWCFG_DACK_POL (1 << 6) +#define HCHWCFG_DREQ_POL (1 << 5) +#define HCHWCFG_DBWIDTH_MASK (0x03 << 3) +#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK) +#define HCHWCFG_INT_POL (1 << 2) +#define HCHWCFG_INT_TRIGGER (1 << 1) +#define HCHWCFG_INT_ENABLE (1 << 0) +#define HCDMACFG 0x21 +#define HCDMACFG_BURST_LEN_MASK (0x03 << 5) +#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK) +#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0) +#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1) +#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2) +#define HCDMACFG_DMA_ENABLE (1 << 4) +#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1) +#define HCDMACFG_CTR_SEL (1 << 2) +#define HCDMACFG_ITLATL_SEL (1 << 1) +#define HCDMACFG_DMA_RW_SELECT (1 << 0) +#define HCXFERCTR 0x22 +#define HCuPINT 0x24 +#define HCuPINT_SOF (1 << 0) +#define HCuPINT_ATL (1 << 1) +#define HCuPINT_AIIEOT (1 << 2) +#define HCuPINT_OPR (1 << 4) +#define HCuPINT_SUSP (1 << 5) +#define HCuPINT_CLKRDY (1 << 6) +#define HCuPINTENB 0x25 +#define HCCHIPID 0x27 +#define HCCHIPID_MASK 0xff00 +#define HCCHIPID_MAGIC 0x6100 +#define HCSCRATCH 0x28 +#define HCSWRES 0x29 +#define HCSWRES_MAGIC 0x00f6 +#define HCITLBUFLEN 0x2a +#define HCATLBUFLEN 0x2b +#define HCBUFSTAT 0x2c +#define HCBUFSTAT_ITL0_FULL (1 << 0) +#define HCBUFSTAT_ITL1_FULL (1 << 1) +#define HCBUFSTAT_ATL_FULL (1 << 2) +#define HCBUFSTAT_ITL0_DONE (1 << 3) +#define HCBUFSTAT_ITL1_DONE (1 << 4) +#define HCBUFSTAT_ATL_DONE (1 << 5) +#define HCRDITL0LEN 0x2d +#define HCRDITL1LEN 0x2e +#define HCITLPORT 0x40 +#define HCATLPORT 0x41 + +/* PTD accessor macros. */ +#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0) +#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK) +#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10) +#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK) +#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11) +#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK) +#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12) +#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK) +#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0) +#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK) +#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10) +#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK) +#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11) +#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK) +#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12) +#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK) +#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0) +#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK) +#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10) +#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK) +#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13) +#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK) +#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0) +#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK) +#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7) +#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK) + +/* Hardware transfer status codes -- CC from ptd->count */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +#define TD_UNEXPECTEDPID 0x07 +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 + /* 0x0A, 0x0B reserved for hardware */ +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D + /* 0x0E, 0x0F reserved for HCD */ +#define TD_NOTACCESSED 0x0F + +/* ------------------------------------------------------------------------- */ + +#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ +#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) + +/* Philips transfer descriptor */ +struct ptd { + u16 count; +#define PTD_COUNT_MSK (0x3ff << 0) +#define PTD_TOGGLE_MSK (1 << 10) +#define PTD_ACTIVE_MSK (1 << 11) +#define PTD_CC_MSK (0xf << 12) + u16 mps; +#define PTD_MPS_MSK (0x3ff << 0) +#define PTD_SPD_MSK (1 << 10) +#define PTD_LAST_MSK (1 << 11) +#define PTD_EP_MSK (0xf << 12) + u16 len; +#define PTD_LEN_MSK (0x3ff << 0) +#define PTD_DIR_MSK (3 << 10) +#define PTD_DIR_SETUP (0) +#define PTD_DIR_OUT (1) +#define PTD_DIR_IN (2) +#define PTD_B5_5_MSK (1 << 13) + u16 faddr; +#define PTD_FA_MSK (0x7f << 0) +#define PTD_FMT_MSK (1 << 7) +} __attribute__ ((packed, aligned(2))); + +struct isp116x_ep { + struct usb_device *udev; + struct ptd ptd; + + u8 maxpacket; + u8 epnum; + u8 nextpid; + + u16 length; /* of current packet */ + unsigned char *data; /* to databuf */ + + u16 error_count; +}; + +/* URB struct */ +#define N_URB_TD 48 +#define URB_DEL 1 +typedef struct { + struct isp116x_ep *ed; + void *transfer_buffer; /* (in) associated data buffer */ + int actual_length; /* (return) actual transfer length */ + unsigned long pipe; /* (in) pipe information */ +#if 0 + int state; +#endif +} urb_priv_t; + +struct isp116x_platform_data { + /* Enable internal resistors on downstream ports */ + unsigned sel15Kres:1; + /* On-chip overcurrent detection */ + unsigned oc_enable:1; + /* Enable wakeup by devices on usb bus (e.g. wakeup + by attachment/detachment or by device activity + such as moving a mouse). When chosen, this option + prevents stopping internal clock, increasing + thereby power consumption in suspended state. */ + unsigned remote_wakeup_enable:1; +}; + +struct isp116x { + u16 *addr_reg; + u16 *data_reg; + + struct isp116x_platform_data *board; + + struct dentry *dentry; + unsigned long stat1, stat2, stat4, stat8, stat16; + + /* Status flags */ + unsigned disabled:1; + unsigned sleeping:1; + + /* Root hub registers */ + u32 rhdesca; + u32 rhdescb; + u32 rhstatus; + u32 rhport[2]; + + /* Schedule for the current frame */ + struct isp116x_ep *atl_active; + int atl_buflen; + int atl_bufshrt; + int atl_last_dir; + int atl_finishing; +}; + +/* ------------------------------------------------- */ + +/* Inter-io delay (ns). The chip is picky about access timings; it + * expects at least: + * 150ns delay between consecutive accesses to DATA_REG, + * 300ns delay between access to ADDR_REG and DATA_REG + * OE, WE MUST NOT be changed during these intervals + */ +#if defined(UDELAY) +#define isp116x_delay(h,d) udelay(d) +#else +#define isp116x_delay(h,d) do {} while (0) +#endif + +static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg) +{ + writew(reg & 0xff, isp116x->addr_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val) +{ + writew(val, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val) +{ + __raw_writew(val, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline u16 isp116x_read_data16(struct isp116x *isp116x) +{ + u16 val; + + val = readw(isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + return val; +} + +static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x) +{ + u16 val; + + val = __raw_readw(isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + return val; +} + +static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val) +{ + writew(val & 0xffff, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + writew(val >> 16, isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); +} + +static inline u32 isp116x_read_data32(struct isp116x *isp116x) +{ + u32 val; + + val = (u32) readw(isp116x->data_reg); + isp116x_delay(isp116x, UDELAY); + val |= ((u32) readw(isp116x->data_reg)) << 16; + isp116x_delay(isp116x, UDELAY); + return val; +} + +/* Let's keep register access functions out of line. Hint: + we wait at least 150 ns at every access. +*/ +static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg) +{ + isp116x_write_addr(isp116x, reg); + return isp116x_read_data16(isp116x); +} + +static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg) +{ + isp116x_write_addr(isp116x, reg); + return isp116x_read_data32(isp116x); +} + +static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg, + unsigned val) +{ + isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); + isp116x_write_data16(isp116x, (u16) (val & 0xffff)); +} + +static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, + unsigned val) +{ + isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); + isp116x_write_data32(isp116x, (u32) val); +} + +/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */ + +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 + +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 diff --git a/drivers/usb/sl811.h b/drivers/usb/sl811.h new file mode 100644 index 0000000000..c1f9f013bd --- /dev/null +++ b/drivers/usb/sl811.h @@ -0,0 +1,104 @@ +#ifndef __UBOOT_SL811_H +#define __UBOOT_SL811_H + +#undef SL811_DEBUG + +#ifdef SL811_DEBUG + #define PDEBUG(level, fmt, args...) \ + if (debug >= (level)) printf("[%s:%d] " fmt, \ + __PRETTY_FUNCTION__, __LINE__ , ## args) +#else + #define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +/* Sl811 host control register */ +#define SL811_CTRL_A 0x00 +#define SL811_ADDR_A 0x01 +#define SL811_LEN_A 0x02 +#define SL811_STS_A 0x03 /* read */ +#define SL811_PIDEP_A 0x03 /* write */ +#define SL811_CNT_A 0x04 /* read */ +#define SL811_DEV_A 0x04 /* write */ +#define SL811_CTRL1 0x05 +#define SL811_INTR 0x06 +#define SL811_CTRL_B 0x08 +#define SL811_ADDR_B 0x09 +#define SL811_LEN_B 0x0A +#define SL811_STS_B 0x0B /* read */ +#define SL811_PIDEP_B 0x0B /* write */ +#define SL811_CNT_B 0x0C /* read */ +#define SL811_DEV_B 0x0C /* write */ +#define SL811_INTRSTS 0x0D /* write clears bitwise */ +#define SL811_HWREV 0x0E /* read */ +#define SL811_SOFLOW 0x0E /* write */ +#define SL811_SOFCNTDIV 0x0F /* read */ +#define SL811_CTRL2 0x0F /* write */ + +/* USB control register bits (addr 0x00 and addr 0x08) */ +#define SL811_USB_CTRL_ARM 0x01 +#define SL811_USB_CTRL_ENABLE 0x02 +#define SL811_USB_CTRL_DIR_OUT 0x04 +#define SL811_USB_CTRL_ISO 0x10 +#define SL811_USB_CTRL_SOF 0x20 +#define SL811_USB_CTRL_TOGGLE_1 0x40 +#define SL811_USB_CTRL_PREAMBLE 0x80 + +/* USB status register bits (addr 0x03 and addr 0x0B) */ +#define SL811_USB_STS_ACK 0x01 +#define SL811_USB_STS_ERROR 0x02 +#define SL811_USB_STS_TIMEOUT 0x04 +#define SL811_USB_STS_TOGGLE_1 0x08 +#define SL811_USB_STS_SETUP 0x10 +#define SL811_USB_STS_OVERFLOW 0x20 +#define SL811_USB_STS_NAK 0x40 +#define SL811_USB_STS_STALL 0x80 + +/* Control register 1 bits (addr 0x05) */ +#define SL811_CTRL1_SOF 0x01 +#define SL811_CTRL1_RESET 0x08 +#define SL811_CTRL1_JKSTATE 0x10 +#define SL811_CTRL1_SPEED_LOW 0x20 +#define SL811_CTRL1_SUSPEND 0x40 + +/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */ +#define SL811_INTR_DONE_A 0x01 +#define SL811_INTR_DONE_B 0x02 +#define SL811_INTR_SOF 0x10 +#define SL811_INTR_INSRMV 0x20 +#define SL811_INTR_DETECT 0x40 +#define SL811_INTR_NOTPRESENT 0x40 +#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */ + +/* HW rev and SOF lo register bits (addr 0x0E) */ +#define SL811_HWR_HWREV 0xF0 + +/* SOF counter and control reg 2 (addr 0x0F) */ +#define SL811_CTL2_SOFHI 0x3F +#define SL811_CTL2_DSWAP 0x40 +#define SL811_CTL2_HOST 0x80 + +/* Set up for 1-ms SOF time. */ +#define SL811_12M_LOW 0xE0 +#define SL811_12M_HI 0x2E + +#define SL811_DATA_START 0x10 +#define SL811_DATA_LIMIT 240 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 + + +#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep)) + +#endif /* __UBOOT_SL811_H */ diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c new file mode 100644 index 0000000000..c1f8427c96 --- /dev/null +++ b/drivers/usb/sl811_usb.c @@ -0,0 +1,737 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This code is based on linux driver for sl811hs chip, source at + * drivers/usb/host/sl811.c: + * + * SL811 Host Controller Interface driver for USB. + * + * Copyright (c) 2003/06, Courage Co., Ltd. + * + * Based on: + * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, + * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, + * Adam Richter, Gregory P. Smith; + * 2.Original SL811 driver (hc_sl811.o) by Pei Liu + * 3.Rewrited as sl811.o by Yin Aihua + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#ifdef CONFIG_USB_SL811HS +#include +#include +#include "sl811.h" + +#include "../../board/kup/common/kup.h" + +#ifdef __PPC__ +# define EIEIO __asm__ volatile ("eieio") +#else +# define EIEIO /* nothing */ +#endif + +#define SL811_ADR (0x50000000) +#define SL811_DAT (0x50000001) + +#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) + +#ifdef SL811_DEBUG +static int debug = 9; +#endif + +static int root_hub_devnum = 0; +static struct usb_port_status rh_status = { 0 };/* root hub port status */ + +static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, + void *data, int buf_len, struct devrequest *cmd); + +static void sl811_write (__u8 index, __u8 data) +{ + *(volatile unsigned char *) (SL811_ADR) = index; + EIEIO; + *(volatile unsigned char *) (SL811_DAT) = data; + EIEIO; +} + +static __u8 sl811_read (__u8 index) +{ + __u8 data; + + *(volatile unsigned char *) (SL811_ADR) = index; + EIEIO; + data = *(volatile unsigned char *) (SL811_DAT); + EIEIO; + return (data); +} + +/* + * Read consecutive bytes of data from the SL811H/SL11H buffer + */ +static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size) +{ + *(volatile unsigned char *) (SL811_ADR) = offset; + EIEIO; + while (size--) { + *buf++ = *(volatile unsigned char *) (SL811_DAT); + EIEIO; + } +} + +/* + * Write consecutive bytes of data to the SL811H/SL11H buffer + */ +static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size) +{ + *(volatile unsigned char *) (SL811_ADR) = offset; + EIEIO; + while (size--) { + *(volatile unsigned char *) (SL811_DAT) = *buf++; + EIEIO; + } +} + +int usb_init_kup4x (void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + int i; + unsigned char tmp; + + memctl = &immap->im_memctl; + memctl->memc_or7 = 0xFFFF8726; + memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */ + /* BP 14 low = USB ON */ + immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC); + /* PB 14 nomal port */ + immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC); + /* output */ + immap->im_cpm.cp_pbdir |= (BP_USB_VCC); + + puts ("USB: "); + + for (i = 0x10; i < 0xff; i++) { + sl811_write(i, i); + tmp = (sl811_read(i)); + if (tmp != i) { + printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp); + return (-1); + } + } + printf ("SL811 ready\n"); + return (0); +} + +/* + * This function resets SL811HS controller and detects the speed of + * the connecting device + * + * Return: 0 = no device attached; 1 = USB device attached + */ +static int sl811_hc_reset(void) +{ + int status ; + + sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); + sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); + + mdelay(20); + + /* Disable hardware SOF generation, clear all irq status. */ + sl811_write(SL811_CTRL1, 0); + mdelay(2); + sl811_write(SL811_INTRSTS, 0xff); + status = sl811_read(SL811_INTRSTS); + + if (status & SL811_INTR_NOTPRESENT) { + /* Device is not present */ + PDEBUG(0, "Device not present\n"); + rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE); + rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; + sl811_write(SL811_INTR, SL811_INTR_INSRMV); + return 0; + } + + /* Send SOF to address 0, endpoint 0. */ + sl811_write(SL811_LEN_B, 0); + sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0)); + sl811_write(SL811_DEV_B, 0x00); + sl811_write(SL811_SOFLOW, SL811_12M_LOW); + + if (status & SL811_INTR_SPEED_FULL) { + /* full speed device connect directly to root hub */ + PDEBUG (0, "Full speed Device attached\n"); + + sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); + mdelay(20); + sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); + sl811_write(SL811_CTRL1, SL811_CTRL1_SOF); + + /* start the SOF or EOP */ + sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); + rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION; + rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED; + mdelay(2); + sl811_write(SL811_INTRSTS, 0xff); + } else { + /* slow speed device connect directly to root-hub */ + PDEBUG(0, "Low speed Device attached\n"); + + sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); + mdelay(20); + sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI); + sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF); + + /* start the SOF or EOP */ + sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); + rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED; + mdelay(2); + sl811_write(SL811_INTRSTS, 0xff); + } + + rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; + sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A); + + return 1; +} + +int usb_lowlevel_init(void) +{ + root_hub_devnum = 0; + sl811_hc_reset(); + return 0; +} + +int usb_lowlevel_stop(void) +{ + sl811_hc_reset(); + return 0; +} + +static int calc_needed_buswidth(int bytes, int need_preamble) +{ + return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048; +} + +static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len) +{ + __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE; + __u16 status = 0; + int err = 0, time_start = get_timer(0); + int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && + usb_pipeslow(pipe); + + if (len > 239) + return -1; + + if (usb_pipeout(pipe)) + ctrl |= SL811_USB_CTRL_DIR_OUT; + if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) + ctrl |= SL811_USB_CTRL_TOGGLE_1; + if (need_preamble) + ctrl |= SL811_USB_CTRL_PREAMBLE; + + sl811_write(SL811_INTRSTS, 0xff); + + while (err < 3) { + sl811_write(SL811_ADDR_A, 0x10); + sl811_write(SL811_LEN_A, len); + if (usb_pipeout(pipe) && len) + sl811_write_buf(0x10, buffer, len); + + if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && + sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble)) + ctrl |= SL811_USB_CTRL_SOF; + else + ctrl &= ~SL811_USB_CTRL_SOF; + + sl811_write(SL811_CTRL_A, ctrl); + while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) { + if (5*CFG_HZ < get_timer(time_start)) { + printf("USB transmit timed out\n"); + return -USB_ST_CRC_ERR; + } + } + + sl811_write(SL811_INTRSTS, 0xff); + status = sl811_read(SL811_STS_A); + + if (status & SL811_USB_STS_ACK) { + int remainder = sl811_read(SL811_CNT_A); + if (remainder) { + PDEBUG(0, "usb transfer remainder = %d\n", remainder); + len -= remainder; + } + if (usb_pipein(pipe) && len) + sl811_read_buf(0x10, buffer, len); + return len; + } + + if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK) + continue; + + PDEBUG(0, "usb transfer error %#x\n", (int)status); + err++; + } + + err = 0; + + if (status & SL811_USB_STS_ERROR) + err |= USB_ST_BUF_ERR; + if (status & SL811_USB_STS_TIMEOUT) + err |= USB_ST_CRC_ERR; + if (status & SL811_USB_STS_STALL) + err |= USB_ST_STALLED; + + return -err; +} + +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len) +{ + int dir_out = usb_pipeout(pipe); + int ep = usb_pipeendpoint(pipe); + int max = usb_maxpacket(dev, pipe); + int done = 0; + + PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n", + usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); + + dev->status = 0; + + sl811_write(SL811_DEV_A, usb_pipedevice(pipe)); + sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep)); + while (done < len) { + int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, + max > len - done ? len - done : max); + if (res < 0) { + dev->status = -res; + return res; + } + + if (!dir_out && res < max) /* short packet */ + break; + + done += res; + usb_dotoggle(dev, ep, dir_out); + } + + dev->act_len = done; + + return 0; +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len,struct devrequest *setup) +{ + int done = 0; + int devnum = usb_pipedevice(pipe); + int ep = usb_pipeendpoint(pipe); + + dev->status = 0; + + if (devnum == root_hub_devnum) + return sl811_rh_submit_urb(dev, pipe, buffer, len, setup); + + PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n", + devnum, ep, buffer, len, (int)setup->requesttype, + (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64); + + sl811_write(SL811_DEV_A, devnum); + sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep)); + /* setup phase */ + usb_settoggle(dev, ep, 1, 0); + if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep), + (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) { + int dir_in = usb_pipein(pipe); + int max = usb_maxpacket(dev, pipe); + + /* data phase */ + sl811_write(SL811_PIDEP_A, + PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep)); + usb_settoggle(dev, ep, usb_pipeout(pipe), 1); + while (done < len) { + int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, + max > len - done ? len - done : max); + if (res < 0) { + PDEBUG(0, "status data failed!\n"); + dev->status = -res; + return 0; + } + done += res; + usb_dotoggle(dev, ep, usb_pipeout(pipe)); + if (dir_in && res < max) /* short packet */ + break; + } + + /* status phase */ + sl811_write(SL811_PIDEP_A, + PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep)); + usb_settoggle(dev, ep, !usb_pipeout(pipe), 1); + if (sl811_send_packet(dev, + !dir_in ? usb_rcvctrlpipe(dev, ep) : + usb_sndctrlpipe(dev, ep), + 0, 0) < 0) { + PDEBUG(0, "status phase failed!\n"); + dev->status = -1; + } + } else { + PDEBUG(0, "setup phase failed!\n"); + dev->status = -1; + } + + dev->act_len = done; + + return done; +} + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, int interval) +{ + PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe, + buffer, len, interval); + return -1; +} + +/* + * SL811 Virtual Root Hub + */ + +/* Device descriptor */ +static __u8 sl811_rh_dev_des[] = +{ + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x10, /* __u16 bcdUSB; v1.1 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x00, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* Configuration descriptor */ +static __u8 sl811_rh_config_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, + 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x08, /* __u16 ep_wMaxPacketSize; */ + 0x00, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + +/* root hub class descriptor*/ +static __u8 sl811_rh_hub_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + 0x01, /* __u8 bNbrPorts; */ + 0x00, /* __u16 wHubCharacteristics; */ + 0x00, + 0x50, /* __u8 bPwrOn2pwrGood; 2ms */ + 0x00, /* __u8 bHubContrCurrent; 0 mA */ + 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */ + 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ +}; + +/* + * helper routine for returning string descriptors in UTF-16LE + * input can actually be ISO-8859-1; ASCII is its 7-bit subset + */ +static int ascii2utf (char *s, u8 *utf, int utfmax) +{ + int retval; + + for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { + *utf++ = *s++; + *utf++ = 0; + } + return retval; +} + +/* + * root_hub_string is used by each host controller's root hub code, + * so that they're identified consistently throughout the system. + */ +static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) +{ + char buf [30]; + + /* assert (len > (2 * (sizeof (buf) + 1))); + assert (strlen (type) <= 8);*/ + + /* language ids */ + if (id == 0) { + *data++ = 4; *data++ = 3; /* 4 bytes data */ + *data++ = 0; *data++ = 0; /* some language id */ + return 4; + + /* serial number */ + } else if (id == 1) { + sprintf (buf, "%#x", serial); + + /* product description */ + } else if (id == 2) { + sprintf (buf, "USB %s Root Hub", type); + + /* id 3 == vendor description */ + + /* unsupported IDs --> "stall" */ + } else + return 0; + + ascii2utf (buf, data + 2, len - 2); + data [0] = 2 + strlen(buf) * 2; + data [1] = 3; + return data [0]; +} + +/* helper macro */ +#define OK(x) len = (x); break + +/* + * This function handles all USB request to the the virtual root hub + */ +static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, + void *data, int buf_len, struct devrequest *cmd) +{ + __u8 data_buf[16]; + __u8 *bufp = data_buf; + int len = 0; + int status = 0; + + __u16 bmRType_bReq; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + + if (usb_pipeint(pipe)) { + PDEBUG(0, "interrupt transfer unimplemented!\n"); + return 0; + } + + bmRType_bReq = cmd->requesttype | (cmd->request << 8); + wValue = le16_to_cpu (cmd->value); + wIndex = le16_to_cpu (cmd->index); + wLength = le16_to_cpu (cmd->length); + + PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n", + bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength); + + /* Request Destination: + without flags: Device, + USB_RECIP_INTERFACE: interface, + USB_RECIP_ENDPOINT: endpoint, + USB_TYPE_CLASS means HUB here, + USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here + */ + switch (bmRType_bReq) { + case RH_GET_STATUS: + *(__u16 *)bufp = cpu_to_le16(1); + OK(2); + + case RH_GET_STATUS | USB_RECIP_INTERFACE: + *(__u16 *)bufp = cpu_to_le16(0); + OK(2); + + case RH_GET_STATUS | USB_RECIP_ENDPOINT: + *(__u16 *)bufp = cpu_to_le16(0); + OK(2); + + case RH_GET_STATUS | USB_TYPE_CLASS: + *(__u32 *)bufp = cpu_to_le32(0); + OK(4); + + case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS: + *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus); + OK(4); + + case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT: + switch (wValue) { + case 1: + OK(0); + } + break; + + case RH_CLEAR_FEATURE | USB_TYPE_CLASS: + switch (wValue) { + case C_HUB_LOCAL_POWER: + OK(0); + + case C_HUB_OVER_CURRENT: + OK(0); + } + break; + + case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE; + OK(0); + + case USB_PORT_FEAT_SUSPEND: + rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND; + OK(0); + + case USB_PORT_FEAT_POWER: + rh_status.wPortStatus &= ~USB_PORT_STAT_POWER; + OK(0); + + case USB_PORT_FEAT_C_CONNECTION: + rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION; + OK(0); + + case USB_PORT_FEAT_C_ENABLE: + rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE; + OK(0); + + case USB_PORT_FEAT_C_SUSPEND: + rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND; + OK(0); + + case USB_PORT_FEAT_C_OVER_CURRENT: + rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT; + OK(0); + + case USB_PORT_FEAT_C_RESET: + rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET; + OK(0); + } + break; + + case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND; + OK(0); + + case USB_PORT_FEAT_RESET: + rh_status.wPortStatus |= USB_PORT_STAT_RESET; + rh_status.wPortChange = 0; + rh_status.wPortChange |= USB_PORT_STAT_C_RESET; + rh_status.wPortStatus &= ~USB_PORT_STAT_RESET; + rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; + OK(0); + + case USB_PORT_FEAT_POWER: + rh_status.wPortStatus |= USB_PORT_STAT_POWER; + OK(0); + + case USB_PORT_FEAT_ENABLE: + rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; + OK(0); + } + break; + + case RH_SET_ADDRESS: + root_hub_devnum = wValue; + OK(0); + + case RH_GET_DESCRIPTOR: + switch ((wValue & 0xff00) >> 8) { + case USB_DT_DEVICE: + len = sizeof(sl811_rh_dev_des); + bufp = sl811_rh_dev_des; + OK(len); + + case USB_DT_CONFIG: + len = sizeof(sl811_rh_config_des); + bufp = sl811_rh_config_des; + OK(len); + + case USB_DT_STRING: + len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength); + if (len > 0) { + bufp = data; + OK(len); + } + + default: + status = -32; + } + break; + + case RH_GET_DESCRIPTOR | USB_TYPE_CLASS: + len = sizeof(sl811_rh_hub_des); + bufp = sl811_rh_hub_des; + OK(len); + + case RH_GET_CONFIGURATION: + bufp[0] = 0x01; + OK(1); + + case RH_SET_CONFIGURATION: + OK(0); + + default: + PDEBUG(1, "unsupported root hub command\n"); + status = -32; + } + + len = min(len, buf_len); + if (data != bufp) + memcpy(data, bufp, len); + + PDEBUG(5, "len = %d, status = %d\n", len, status); + + usb_dev->status = status; + usb_dev->act_len = len; + + return status == 0 ? len : status; +} + +#endif /* CONFIG_USB_SL811HS */ diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c new file mode 100644 index 0000000000..cfa384eff6 --- /dev/null +++ b/drivers/usb/usb_ohci.c @@ -0,0 +1,1923 @@ +/* + * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus. + * + * Interrupt support is added. Now, it has been tested + * on ULI1575 chip and works well with USB keyboard. + * + * (C) Copyright 2007 + * Zhang Wei, Freescale Semiconductor, Inc. + * + * (C) Copyright 2003 + * Gary Jennejohn, DENX Software Engineering + * + * Note: Much of this code has been derived from Linux 2.4 + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * + * Modified for the MP2USB by (C) Copyright 2005 Eric Benard + * ebenard@eukrea.com - based on s3c24x0's driver + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +/* + * IMPORTANT NOTES + * 1 - Read doc/README.generic_usb_ohci + * 2 - this driver is intended for use with USB Mass Storage Devices + * (BBB) and USB keyboard. There is NO support for Isochronous pipes! + * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG + * to activate workaround for bug #41 or this driver will NOT work! + */ + +#include + +#ifdef CONFIG_USB_OHCI_NEW + +#include + +#if defined(CONFIG_PCI_OHCI) +# include +#endif + +#include +#include +#include "usb_ohci.h" + +#ifdef CONFIG_AT91RM9200 +#include /* needed for AT91_USB_HOST_BASE */ +#endif + +#if defined(CONFIG_ARM920T) || \ + defined(CONFIG_S3C2400) || \ + defined(CONFIG_S3C2410) || \ + defined(CONFIG_440EP) || \ + defined(CONFIG_PCI_OHCI) || \ + defined(CONFIG_MPC5200) +# define OHCI_USE_NPS /* force NoPowerSwitching mode */ +#endif + +#undef OHCI_VERBOSE_DEBUG /* not always helpful */ +#undef DEBUG +#undef SHOW_INFO +#undef OHCI_FILL_TRACE + +/* For initializing controller (mask in an HCFS mode too) */ +#define OHCI_CONTROL_INIT \ + (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE + +/* + * e.g. PCI controllers need this + */ +#ifdef CFG_OHCI_SWAP_REG_ACCESS +# define readl(a) __swap_32(*((vu_long *)(a))) +# define writel(a, b) (*((vu_long *)(b)) = __swap_32((vu_long)a)) +#else +# define readl(a) (*((vu_long *)(a))) +# define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a)) +#endif /* CFG_OHCI_SWAP_REG_ACCESS */ + +#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) + +#ifdef CONFIG_PCI_OHCI +static struct pci_device_id ohci_pci_ids[] = { + {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */ + {0x1033, 0x0035}, /* NEC PCI OHCI module ids */ + /* Please add supported PCI OHCI controller ids here */ + {0, 0} +}; +#endif + +#ifdef DEBUG +#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) +#else +#define dbg(format, arg...) do {} while(0) +#endif /* DEBUG */ +#define err(format, arg...) printf("ERROR: " format "\n", ## arg) +#undef SHOW_INFO +#ifdef SHOW_INFO +#define info(format, arg...) printf("INFO: " format "\n", ## arg) +#else +#define info(format, arg...) do {} while(0) +#endif + +#ifdef CFG_OHCI_BE_CONTROLLER +# define m16_swap(x) cpu_to_be16(x) +# define m32_swap(x) cpu_to_be32(x) +#else +# define m16_swap(x) cpu_to_le16(x) +# define m32_swap(x) cpu_to_le32(x) +#endif /* CFG_OHCI_BE_CONTROLLER */ + +/* global ohci_t */ +static ohci_t gohci; +/* this must be aligned to a 256 byte boundary */ +struct ohci_hcca ghcca[1]; +/* a pointer to the aligned storage */ +struct ohci_hcca *phcca; +/* this allocates EDs for all possible endpoints */ +struct ohci_device ohci_dev; +/* RHSC flag */ +int got_rhsc; +/* device which was disconnected */ +struct usb_device *devgone; + +/*-------------------------------------------------------------------------*/ + +/* AMD-756 (D2 rev) reports corrupt register contents in some cases. + * The erratum (#4) description is incorrect. AMD's workaround waits + * till some bits (mostly reserved) are clear; ok for all revs. + */ +#define OHCI_QUIRK_AMD756 0xabcd +#define read_roothub(hc, register, mask) ({ \ + u32 temp = readl (&hc->regs->roothub.register); \ + if (hc->flags & OHCI_QUIRK_AMD756) \ + while (temp & mask) \ + temp = readl (&hc->regs->roothub.register); \ + temp; }) + +static u32 roothub_a (struct ohci *hc) + { return read_roothub (hc, a, 0xfc0fe000); } +static inline u32 roothub_b (struct ohci *hc) + { return readl (&hc->regs->roothub.b); } +static inline u32 roothub_status (struct ohci *hc) + { return readl (&hc->regs->roothub.status); } +static u32 roothub_portstatus (struct ohci *hc, int i) + { return read_roothub (hc, portstatus [i], 0xffe0fce0); } + +/* forward declaration */ +static int hc_interrupt (void); +static void +td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer, + int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval); + +/*-------------------------------------------------------------------------* + * URB support functions + *-------------------------------------------------------------------------*/ + +/* free HCD-private data associated with this URB */ + +static void urb_free_priv (urb_priv_t * urb) +{ + int i; + int last; + struct td * td; + + last = urb->length - 1; + if (last >= 0) { + for (i = 0; i <= last; i++) { + td = urb->td[i]; + if (td) { + td->usb_dev = NULL; + urb->td[i] = NULL; + } + } + } + free(urb); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +static int sohci_get_current_frame_number (struct usb_device * dev); + +/* debug| print the main components of an URB + * small: 0) header + data packets 1) just header */ + +static void pkt_print (urb_priv_t *purb, struct usb_device * dev, + unsigned long pipe, void * buffer, + int transfer_len, struct devrequest * setup, char * str, int small) +{ + dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx", + str, + sohci_get_current_frame_number (dev), + usb_pipedevice (pipe), + usb_pipeendpoint (pipe), + usb_pipeout (pipe)? 'O': 'I', + usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"): + (usb_pipecontrol (pipe)? "CTRL": "BULK"), + (purb ? purb->actual_length : 0), + transfer_len, dev->status); +#ifdef OHCI_VERBOSE_DEBUG + if (!small) { + int i, len; + + if (usb_pipecontrol (pipe)) { + printf (__FILE__ ": cmd(8):"); + for (i = 0; i < 8 ; i++) + printf (" %02x", ((__u8 *) setup) [i]); + printf ("\n"); + } + if (transfer_len > 0 && buffer) { + printf (__FILE__ ": data(%d/%d):", + (purb ? purb->actual_length : 0), + transfer_len); + len = usb_pipeout (pipe)? + transfer_len: + (purb ? purb->actual_length : 0); + for (i = 0; i < 16 && i < len; i++) + printf (" %02x", ((__u8 *) buffer) [i]); + printf ("%s\n", i < len? "...": ""); + } + } +#endif +} + +/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/ +void ep_print_int_eds (ohci_t *ohci, char * str) { + int i, j; + __u32 * ed_p; + for (i= 0; i < 32; i++) { + j = 5; + ed_p = &(ohci->hcca->int_table [i]); + if (*ed_p == 0) + continue; + printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i); + while (*ed_p != 0 && j--) { + ed_t *ed = (ed_t *)m32_swap(ed_p); + printf (" ed: %4x;", ed->hwINFO); + ed_p = &ed->hwNextED; + } + printf ("\n"); + } +} + +static void ohci_dump_intr_mask (char *label, __u32 mask) +{ + dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s", + label, + mask, + (mask & OHCI_INTR_MIE) ? " MIE" : "", + (mask & OHCI_INTR_OC) ? " OC" : "", + (mask & OHCI_INTR_RHSC) ? " RHSC" : "", + (mask & OHCI_INTR_FNO) ? " FNO" : "", + (mask & OHCI_INTR_UE) ? " UE" : "", + (mask & OHCI_INTR_RD) ? " RD" : "", + (mask & OHCI_INTR_SF) ? " SF" : "", + (mask & OHCI_INTR_WDH) ? " WDH" : "", + (mask & OHCI_INTR_SO) ? " SO" : "" + ); +} + +static void maybe_print_eds (char *label, __u32 value) +{ + ed_t *edp = (ed_t *)value; + + if (value) { + dbg ("%s %08x", label, value); + dbg ("%08x", edp->hwINFO); + dbg ("%08x", edp->hwTailP); + dbg ("%08x", edp->hwHeadP); + dbg ("%08x", edp->hwNextED); + } +} + +static char * hcfs2string (int state) +{ + switch (state) { + case OHCI_USB_RESET: return "reset"; + case OHCI_USB_RESUME: return "resume"; + case OHCI_USB_OPER: return "operational"; + case OHCI_USB_SUSPEND: return "suspend"; + } + return "?"; +} + +/* dump control and status registers */ +static void ohci_dump_status (ohci_t *controller) +{ + struct ohci_regs *regs = controller->regs; + __u32 temp; + + temp = readl (®s->revision) & 0xff; + if (temp != 0x10) + dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f)); + + temp = readl (®s->control); + dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, + (temp & OHCI_CTRL_RWE) ? " RWE" : "", + (temp & OHCI_CTRL_RWC) ? " RWC" : "", + (temp & OHCI_CTRL_IR) ? " IR" : "", + hcfs2string (temp & OHCI_CTRL_HCFS), + (temp & OHCI_CTRL_BLE) ? " BLE" : "", + (temp & OHCI_CTRL_CLE) ? " CLE" : "", + (temp & OHCI_CTRL_IE) ? " IE" : "", + (temp & OHCI_CTRL_PLE) ? " PLE" : "", + temp & OHCI_CTRL_CBSR + ); + + temp = readl (®s->cmdstatus); + dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, + (temp & OHCI_SOC) >> 16, + (temp & OHCI_OCR) ? " OCR" : "", + (temp & OHCI_BLF) ? " BLF" : "", + (temp & OHCI_CLF) ? " CLF" : "", + (temp & OHCI_HCR) ? " HCR" : "" + ); + + ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus)); + ohci_dump_intr_mask ("intrenable", readl (®s->intrenable)); + + maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent)); + + maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead)); + maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent)); + + maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead)); + maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent)); + + maybe_print_eds ("donehead", readl (®s->donehead)); +} + +static void ohci_dump_roothub (ohci_t *controller, int verbose) +{ + __u32 temp, ndp, i; + + temp = roothub_a (controller); + ndp = (temp & RH_A_NDP); +#ifdef CONFIG_AT91C_PQFP_UHPBUG + ndp = (ndp == 2) ? 1:0; +#endif + if (verbose) { + dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, + ((temp & RH_A_POTPGT) >> 24) & 0xff, + (temp & RH_A_NOCP) ? " NOCP" : "", + (temp & RH_A_OCPM) ? " OCPM" : "", + (temp & RH_A_DT) ? " DT" : "", + (temp & RH_A_NPS) ? " NPS" : "", + (temp & RH_A_PSM) ? " PSM" : "", + ndp + ); + temp = roothub_b (controller); + dbg ("roothub.b: %08x PPCM=%04x DR=%04x", + temp, + (temp & RH_B_PPCM) >> 16, + (temp & RH_B_DR) + ); + temp = roothub_status (controller); + dbg ("roothub.status: %08x%s%s%s%s%s%s", + temp, + (temp & RH_HS_CRWE) ? " CRWE" : "", + (temp & RH_HS_OCIC) ? " OCIC" : "", + (temp & RH_HS_LPSC) ? " LPSC" : "", + (temp & RH_HS_DRWE) ? " DRWE" : "", + (temp & RH_HS_OCI) ? " OCI" : "", + (temp & RH_HS_LPS) ? " LPS" : "" + ); + } + + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus (controller, i); + dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", + i, + temp, + (temp & RH_PS_PRSC) ? " PRSC" : "", + (temp & RH_PS_OCIC) ? " OCIC" : "", + (temp & RH_PS_PSSC) ? " PSSC" : "", + (temp & RH_PS_PESC) ? " PESC" : "", + (temp & RH_PS_CSC) ? " CSC" : "", + + (temp & RH_PS_LSDA) ? " LSDA" : "", + (temp & RH_PS_PPS) ? " PPS" : "", + (temp & RH_PS_PRS) ? " PRS" : "", + (temp & RH_PS_POCI) ? " POCI" : "", + (temp & RH_PS_PSS) ? " PSS" : "", + + (temp & RH_PS_PES) ? " PES" : "", + (temp & RH_PS_CCS) ? " CCS" : "" + ); + } +} + +static void ohci_dump (ohci_t *controller, int verbose) +{ + dbg ("OHCI controller usb-%s state", controller->slot_name); + + /* dumps some of the state we know about */ + ohci_dump_status (controller); + if (verbose) + ep_print_int_eds (controller, "hcca"); + dbg ("hcca frame #%04x", controller->hcca->frame_no); + ohci_dump_roothub (controller, 1); + +#endif /* DEBUG */ + +/*-------------------------------------------------------------------------* + * Interface functions (URB) + *-------------------------------------------------------------------------*/ + +/* get a transfer request */ + +int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup) +{ + ohci_t *ohci; + ed_t * ed; + urb_priv_t *purb_priv = urb; + int i, size = 0; + struct usb_device *dev = urb->dev; + unsigned long pipe = urb->pipe; + void *buffer = urb->transfer_buffer; + int transfer_len = urb->transfer_buffer_length; + int interval = urb->interval; + + ohci = &gohci; + + /* when controller's hung, permit only roothub cleanup attempts + * such as powering down ports */ + if (ohci->disabled) { + err("sohci_submit_job: EPIPE"); + return -1; + } + + /* we're about to begin a new transaction here so mark the URB unfinished */ + urb->finished = 0; + + /* every endpoint has a ed, locate and fill it */ + if (!(ed = ep_add_ed (dev, pipe, interval, 1))) { + err("sohci_submit_job: ENOMEM"); + return -1; + } + + /* for the private part of the URB we need the number of TDs (size) */ + switch (usb_pipetype (pipe)) { + case PIPE_BULK: /* one TD for every 4096 Byte */ + size = (transfer_len - 1) / 4096 + 1; + break; + case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ + size = (transfer_len == 0)? 2: + (transfer_len - 1) / 4096 + 3; + break; + case PIPE_INTERRUPT: /* 1 TD */ + size = 1; + break; + } + + ed->purb = urb; + + if (size >= (N_URB_TD - 1)) { + err("need %d TDs, only have %d", size, N_URB_TD); + return -1; + } + purb_priv->pipe = pipe; + + /* fill the private part of the URB */ + purb_priv->length = size; + purb_priv->ed = ed; + purb_priv->actual_length = 0; + + /* allocate the TDs */ + /* note that td[0] was allocated in ep_add_ed */ + for (i = 0; i < size; i++) { + purb_priv->td[i] = td_alloc (dev); + if (!purb_priv->td[i]) { + purb_priv->length = i; + urb_free_priv (purb_priv); + err("sohci_submit_job: ENOMEM"); + return -1; + } + } + + if (ed->state == ED_NEW || (ed->state & ED_DEL)) { + urb_free_priv (purb_priv); + err("sohci_submit_job: EINVAL"); + return -1; + } + + /* link the ed into a chain if is not already */ + if (ed->state != ED_OPER) + ep_link (ohci, ed); + + /* fill the TDs and link it to the ed */ + td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval); + + return 0; +} + +static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb) +{ + struct ohci_regs *regs = hc->regs; + + switch (usb_pipetype (urb->pipe)) { + case PIPE_INTERRUPT: + /* implicitly requeued */ + if (urb->dev->irq_handle && + (urb->dev->irq_act_len = urb->actual_length)) { + writel (OHCI_INTR_WDH, ®s->intrenable); + readl (®s->intrenable); /* PCI posting flush */ + urb->dev->irq_handle(urb->dev); + writel (OHCI_INTR_WDH, ®s->intrdisable); + readl (®s->intrdisable); /* PCI posting flush */ + } + urb->actual_length = 0; + td_submit_job ( + urb->dev, + urb->pipe, + urb->transfer_buffer, + urb->transfer_buffer_length, + NULL, + urb, + urb->interval); + break; + case PIPE_CONTROL: + case PIPE_BULK: + break; + default: + return 0; + } + return 1; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +/* tell us the current USB frame number */ + +static int sohci_get_current_frame_number (struct usb_device *usb_dev) +{ + ohci_t *ohci = &gohci; + + return m16_swap (ohci->hcca->frame_no); +} +#endif + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +/* search for the right branch to insert an interrupt ed into the int tree + * do some load ballancing; + * returns the branch and + * sets the interval to interval = 2^integer (ld (interval)) */ + +static int ep_int_ballance (ohci_t * ohci, int interval, int load) +{ + int i, branch = 0; + + /* search for the least loaded interrupt endpoint + * branch of all 32 branches + */ + for (i = 0; i < 32; i++) + if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i]) + branch = i; + + branch = branch % interval; + for (i = branch; i < 32; i += interval) + ohci->ohci_int_load [i] += load; + + return branch; +} + +/*-------------------------------------------------------------------------*/ + +/* 2^int( ld (inter)) */ + +static int ep_2_n_interval (int inter) +{ + int i; + for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++); + return 1 << i; +} + +/*-------------------------------------------------------------------------*/ + +/* the int tree is a binary tree + * in order to process it sequentially the indexes of the branches have to be mapped + * the mapping reverses the bits of a word of num_bits length */ + +static int ep_rev (int num_bits, int word) +{ + int i, wout = 0; + + for (i = 0; i < num_bits; i++) + wout |= (((word >> i) & 1) << (num_bits - i - 1)); + return wout; +} + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +/* link an ed into one of the HC chains */ + +static int ep_link (ohci_t *ohci, ed_t *edi) +{ + volatile ed_t *ed = edi; + int int_branch; + int i; + int inter; + int interval; + int load; + __u32 * ed_p; + + ed->state = ED_OPER; + ed->int_interval = 0; + + switch (ed->type) { + case PIPE_CONTROL: + ed->hwNextED = 0; + if (ohci->ed_controltail == NULL) { + writel (ed, &ohci->regs->ed_controlhead); + } else { + ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed); + } + ed->ed_prev = ohci->ed_controltail; + if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_CLE; + writel (ohci->hc_control, &ohci->regs->control); + } + ohci->ed_controltail = edi; + break; + + case PIPE_BULK: + ed->hwNextED = 0; + if (ohci->ed_bulktail == NULL) { + writel (ed, &ohci->regs->ed_bulkhead); + } else { + ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed); + } + ed->ed_prev = ohci->ed_bulktail; + if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_BLE; + writel (ohci->hc_control, &ohci->regs->control); + } + ohci->ed_bulktail = edi; + break; + + case PIPE_INTERRUPT: + load = ed->int_load; + interval = ep_2_n_interval (ed->int_period); + ed->int_interval = interval; + int_branch = ep_int_ballance (ohci, interval, load); + ed->int_branch = int_branch; + + for (i = 0; i < ep_rev (6, interval); i += inter) { + inter = 1; + for (ed_p = &(ohci->hcca->int_table[ep_rev (5, i) + int_branch]); + (*ed_p != 0) && (((ed_t *)ed_p)->int_interval >= interval); + ed_p = &(((ed_t *)ed_p)->hwNextED)) + inter = ep_rev (6, ((ed_t *)ed_p)->int_interval); + ed->hwNextED = *ed_p; + *ed_p = m32_swap((unsigned long)ed); + } + break; + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* scan the periodic table to find and unlink this ED */ +static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed, + unsigned index, unsigned period) +{ + for (; index < NUM_INTS; index += period) { + __u32 *ed_p = &ohci->hcca->int_table [index]; + + /* ED might have been unlinked through another path */ + while (*ed_p != 0) { + if (((struct ed *)m32_swap ((unsigned long)ed_p)) == ed) { + *ed_p = ed->hwNextED; + break; + } + ed_p = & (((struct ed *)m32_swap ((unsigned long)ed_p))->hwNextED); + } + } +} + +/* unlink an ed from one of the HC chains. + * just the link to the ed is unlinked. + * the link from the ed still points to another operational ed or 0 + * so the HC can eventually finish the processing of the unlinked ed */ + +static int ep_unlink (ohci_t *ohci, ed_t *edi) +{ + volatile ed_t *ed = edi; + int i; + + ed->hwINFO |= m32_swap (OHCI_ED_SKIP); + + switch (ed->type) { + case PIPE_CONTROL: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_CLE; + writel (ohci->hc_control, &ohci->regs->control); + } + writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_controltail == ed) { + ohci->ed_controltail = ed->ed_prev; + } else { + ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; + } + break; + + case PIPE_BULK: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_BLE; + writel (ohci->hc_control, &ohci->regs->control); + } + writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_bulktail == ed) { + ohci->ed_bulktail = ed->ed_prev; + } else { + ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; + } + break; + + case PIPE_INTERRUPT: + periodic_unlink (ohci, ed, 0, 1); + for (i = ed->int_branch; i < 32; i += ed->int_interval) + ohci->ohci_int_load[i] -= ed->int_load; + break; + } + ed->state = ED_UNLINK; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* add/reinit an endpoint; this should be done once at the + * usb_set_configuration command, but the USB stack is a little bit + * stateless so we do it at every transaction if the state of the ed + * is ED_NEW then a dummy td is added and the state is changed to + * ED_UNLINK in all other cases the state is left unchanged the ed + * info fields are setted anyway even though most of them should not + * change + */ +static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe, + int interval, int load) +{ + td_t *td; + ed_t *ed_ret; + volatile ed_t *ed; + + ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) | + (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))]; + + if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { + err("ep_add_ed: pending delete"); + /* pending delete request */ + return NULL; + } + + if (ed->state == ED_NEW) { + ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */ + /* dummy td; end of td list for ed */ + td = td_alloc (usb_dev); + ed->hwTailP = m32_swap ((unsigned long)td); + ed->hwHeadP = ed->hwTailP; + ed->state = ED_UNLINK; + ed->type = usb_pipetype (pipe); + ohci_dev.ed_cnt++; + } + + ed->hwINFO = m32_swap (usb_pipedevice (pipe) + | usb_pipeendpoint (pipe) << 7 + | (usb_pipeisoc (pipe)? 0x8000: 0) + | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000)) + | usb_pipeslow (pipe) << 13 + | usb_maxpacket (usb_dev, pipe) << 16); + + if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) { + ed->int_period = interval; + ed->int_load = load; + } + + return ed_ret; +} + +/*-------------------------------------------------------------------------* + * TD handling functions + *-------------------------------------------------------------------------*/ + +/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ + +static void td_fill (ohci_t *ohci, unsigned int info, + void *data, int len, + struct usb_device *dev, int index, urb_priv_t *urb_priv) +{ + volatile td_t *td, *td_pt; +#ifdef OHCI_FILL_TRACE + int i; +#endif + + if (index > urb_priv->length) { + err("index > length"); + return; + } + /* use this td as the next dummy */ + td_pt = urb_priv->td [index]; + td_pt->hwNextTD = 0; + + /* fill the old dummy TD */ + td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf); + + td->ed = urb_priv->ed; + td->next_dl_td = NULL; + td->index = index; + td->data = (__u32)data; +#ifdef OHCI_FILL_TRACE + if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) { + for (i = 0; i < len; i++) + printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]); + printf("\n"); + } +#endif + if (!len) + data = 0; + + td->hwINFO = m32_swap (info); + td->hwCBP = m32_swap ((unsigned long)data); + if (data) + td->hwBE = m32_swap ((unsigned long)(data + len - 1)); + else + td->hwBE = 0; + td->hwNextTD = m32_swap ((unsigned long)td_pt); + + /* append to queue */ + td->ed->hwTailP = td->hwNextTD; +} + +/*-------------------------------------------------------------------------*/ + +/* prepare all TDs of a transfer */ + +static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval) +{ + ohci_t *ohci = &gohci; + int data_len = transfer_len; + void *data; + int cnt = 0; + __u32 info = 0; + unsigned int toggle = 0; + + /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */ + if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { + toggle = TD_T_TOGGLE; + } else { + toggle = TD_T_DATA0; + usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1); + } + urb->td_cnt = 0; + if (data_len) + data = buffer; + else + data = 0; + + switch (usb_pipetype (pipe)) { + case PIPE_BULK: + info = usb_pipeout (pipe)? + TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; + while(data_len > 4096) { + td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb); + data += 4096; data_len -= 4096; cnt++; + } + info = usb_pipeout (pipe)? + TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; + td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb); + cnt++; + + if (!ohci->sleeping) + writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */ + break; + + case PIPE_CONTROL: + info = TD_CC | TD_DP_SETUP | TD_T_DATA0; + td_fill (ohci, info, setup, 8, dev, cnt++, urb); + if (data_len > 0) { + info = usb_pipeout (pipe)? + TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; + /* NOTE: mishandles transfers >8K, some >4K */ + td_fill (ohci, info, data, data_len, dev, cnt++, urb); + } + info = usb_pipeout (pipe)? + TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1; + td_fill (ohci, info, data, 0, dev, cnt++, urb); + if (!ohci->sleeping) + writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */ + break; + + case PIPE_INTERRUPT: + info = usb_pipeout (urb->pipe)? + TD_CC | TD_DP_OUT | toggle: + TD_CC | TD_R | TD_DP_IN | toggle; + td_fill (ohci, info, data, data_len, dev, cnt++, urb); + break; + } + if (urb->length != cnt) + dbg("TD LENGTH %d != CNT %d", urb->length, cnt); +} + +/*-------------------------------------------------------------------------* + * Done List handling functions + *-------------------------------------------------------------------------*/ + +/* calculate the transfer length and update the urb */ + +static void dl_transfer_length(td_t * td) +{ + __u32 tdINFO, tdBE, tdCBP; + urb_priv_t *lurb_priv = td->ed->purb; + + tdINFO = m32_swap (td->hwINFO); + tdBE = m32_swap (td->hwBE); + tdCBP = m32_swap (td->hwCBP); + + if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL && + ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { + if (tdBE != 0) { + if (td->hwCBP == 0) + lurb_priv->actual_length += tdBE - td->data + 1; + else + lurb_priv->actual_length += tdCBP - td->data; + } + } +} + +/*-------------------------------------------------------------------------*/ + +/* replies to the request have to be on a FIFO basis so + * we reverse the reversed done-list */ + +static td_t * dl_reverse_done_list (ohci_t *ohci) +{ + __u32 td_list_hc; + td_t *td_rev = NULL; + td_t *td_list = NULL; + urb_priv_t *lurb_priv = NULL; + + td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0; + ohci->hcca->done_head = 0; + + while (td_list_hc) { + td_list = (td_t *)td_list_hc; + + if (TD_CC_GET (m32_swap (td_list->hwINFO))) { + lurb_priv = td_list->ed->purb; + dbg(" USB-error/status: %x : %p", + TD_CC_GET (m32_swap (td_list->hwINFO)), td_list); + if (td_list->ed->hwHeadP & m32_swap (0x1)) { + if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) { + td_list->ed->hwHeadP = + (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) | + (td_list->ed->hwHeadP & m32_swap (0x2)); + lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1; + } else + td_list->ed->hwHeadP &= m32_swap (0xfffffff2); + } +#ifdef CONFIG_MPC5200 + td_list->hwNextTD = 0; +#endif + } + + td_list->next_dl_td = td_rev; + td_rev = td_list; + td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0; + } + return td_list; +} + +/*-------------------------------------------------------------------------*/ + +/* td done list */ +static int dl_done_list (ohci_t *ohci, td_t *td_list) +{ + td_t *td_list_next = NULL; + ed_t *ed; + int cc = 0; + int stat = 0; + /* urb_t *urb; */ + urb_priv_t *lurb_priv; + __u32 tdINFO, edHeadP, edTailP; + + while (td_list) { + td_list_next = td_list->next_dl_td; + + tdINFO = m32_swap (td_list->hwINFO); + + ed = td_list->ed; + lurb_priv = ed->purb; + + dl_transfer_length(td_list); + + /* error code of transfer */ + cc = TD_CC_GET (tdINFO); + if (cc != 0) { + dbg("ConditionCode %#x", cc); + stat = cc_to_error[cc]; + } + + /* see if this done list makes for all TD's of current URB, + * and mark the URB finished if so */ + if (++(lurb_priv->td_cnt) == lurb_priv->length) { +#if 1 + if ((ed->state & (ED_OPER | ED_UNLINK)) && + (lurb_priv->state != URB_DEL)) +#else + if ((ed->state & (ED_OPER | ED_UNLINK))) +#endif + lurb_priv->finished = sohci_return_job(ohci, + lurb_priv); + else + dbg("dl_done_list: strange.., ED state %x, ed->state\n"); + } else + dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt, + lurb_priv->length); + if (ed->state != ED_NEW && + (usb_pipetype (lurb_priv->pipe) != PIPE_INTERRUPT)) { + edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0; + edTailP = m32_swap (ed->hwTailP); + + /* unlink eds if they are not busy */ + if ((edHeadP == edTailP) && (ed->state == ED_OPER)) + ep_unlink (ohci, ed); + } + + td_list = td_list_next; + } + return stat; +} + +/*-------------------------------------------------------------------------* + * Virtual Root Hub + *-------------------------------------------------------------------------*/ + +/* Device descriptor */ +static __u8 root_hub_dev_des[] = +{ + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x10, /* __u16 bcdUSB; v1.1 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x00, /* __u8 iManufacturer; */ + 0x01, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* Configuration descriptor */ +static __u8 root_hub_config_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ + 0x00, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + +static unsigned char root_hub_str_index0[] = +{ + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = +{ + 28, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'O', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'C', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + +/* Hub class-specific descriptor is constructed dynamically */ + +/*-------------------------------------------------------------------------*/ + +#define OK(x) len = (x); break +#ifdef DEBUG +#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);} +#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);} +#else +#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status) +#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1]) +#endif +#define RD_RH_STAT roothub_status(&gohci) +#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1) + +/* request to virtual root hub */ + +int rh_check_port_status(ohci_t *controller) +{ + __u32 temp, ndp, i; + int res; + + res = -1; + temp = roothub_a (controller); + ndp = (temp & RH_A_NDP); +#ifdef CONFIG_AT91C_PQFP_UHPBUG + ndp = (ndp == 2) ? 1:0; +#endif + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus (controller, i); + /* check for a device disconnect */ + if (((temp & (RH_PS_PESC | RH_PS_CSC)) == + (RH_PS_PESC | RH_PS_CSC)) && + ((temp & RH_PS_CCS) == 0)) { + res = i; + break; + } + } + return res; +} + +static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, struct devrequest *cmd) +{ + void * data = buffer; + int leni = transfer_len; + int len = 0; + int stat = 0; + __u32 datab[4]; + __u8 *data_buf = (__u8 *)datab; + __u16 bmRType_bReq; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + +#ifdef DEBUG +pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { + info("Root-Hub submit IRQ: NOT implemented"); + return 0; + } + + bmRType_bReq = cmd->requesttype | (cmd->request << 8); + wValue = cpu_to_le16 (cmd->value); + wIndex = cpu_to_le16 (cmd->index); + wLength = cpu_to_le16 (cmd->length); + + info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", + dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); + + switch (bmRType_bReq) { + /* Request Destination: + without flags: Device, + RH_INTERFACE: interface, + RH_ENDPOINT: endpoint, + RH_CLASS means HUB here, + RH_OTHER | RH_CLASS almost ever means HUB_PORT here + */ + + case RH_GET_STATUS: + *(__u16 *) data_buf = cpu_to_le16 (1); OK (2); + case RH_GET_STATUS | RH_INTERFACE: + *(__u16 *) data_buf = cpu_to_le16 (0); OK (2); + case RH_GET_STATUS | RH_ENDPOINT: + *(__u16 *) data_buf = cpu_to_le16 (0); OK (2); + case RH_GET_STATUS | RH_CLASS: + *(__u32 *) data_buf = cpu_to_le32 ( + RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); + OK (4); + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + *(__u32 *) data_buf = cpu_to_le32 (RD_RH_PORTSTAT); OK (4); + + case RH_CLEAR_FEATURE | RH_ENDPOINT: + switch (wValue) { + case (RH_ENDPOINT_STALL): OK (0); + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + switch (wValue) { + case RH_C_HUB_LOCAL_POWER: + OK(0); + case (RH_C_HUB_OVER_CURRENT): + WR_RH_STAT(RH_HS_OCIC); OK (0); + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + switch (wValue) { + case (RH_PORT_ENABLE): + WR_RH_PORTSTAT (RH_PS_CCS ); OK (0); + case (RH_PORT_SUSPEND): + WR_RH_PORTSTAT (RH_PS_POCI); OK (0); + case (RH_PORT_POWER): + WR_RH_PORTSTAT (RH_PS_LSDA); OK (0); + case (RH_C_PORT_CONNECTION): + WR_RH_PORTSTAT (RH_PS_CSC ); OK (0); + case (RH_C_PORT_ENABLE): + WR_RH_PORTSTAT (RH_PS_PESC); OK (0); + case (RH_C_PORT_SUSPEND): + WR_RH_PORTSTAT (RH_PS_PSSC); OK (0); + case (RH_C_PORT_OVER_CURRENT): + WR_RH_PORTSTAT (RH_PS_OCIC); OK (0); + case (RH_C_PORT_RESET): + WR_RH_PORTSTAT (RH_PS_PRSC); OK (0); + } + break; + + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + switch (wValue) { + case (RH_PORT_SUSPEND): + WR_RH_PORTSTAT (RH_PS_PSS ); OK (0); + case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ + if (RD_RH_PORTSTAT & RH_PS_CCS) + WR_RH_PORTSTAT (RH_PS_PRS); + OK (0); + case (RH_PORT_POWER): + WR_RH_PORTSTAT (RH_PS_PPS ); + wait_ms(100); + OK (0); + case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ + if (RD_RH_PORTSTAT & RH_PS_CCS) + WR_RH_PORTSTAT (RH_PS_PES ); + OK (0); + } + break; + + case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0); + + case RH_GET_DESCRIPTOR: + switch ((wValue & 0xff00) >> 8) { + case (0x01): /* device descriptor */ + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_dev_des), + wLength)); + data_buf = root_hub_dev_des; OK(len); + case (0x02): /* configuration descriptor */ + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_config_des), + wLength)); + data_buf = root_hub_config_des; OK(len); + case (0x03): /* string descriptors */ + if(wValue==0x0300) { + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_str_index0), + wLength)); + data_buf = root_hub_str_index0; + OK(len); + } + if(wValue==0x0301) { + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_str_index1), + wLength)); + data_buf = root_hub_str_index1; + OK(len); + } + default: + stat = USB_ST_STALLED; + } + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + { + __u32 temp = roothub_a (&gohci); + + data_buf [0] = 9; /* min length; */ + data_buf [1] = 0x29; + data_buf [2] = temp & RH_A_NDP; +#ifdef CONFIG_AT91C_PQFP_UHPBUG + data_buf [2] = (data_buf [2] == 2) ? 1:0; +#endif + data_buf [3] = 0; + if (temp & RH_A_PSM) /* per-port power switching? */ + data_buf [3] |= 0x1; + if (temp & RH_A_NOCP) /* no overcurrent reporting? */ + data_buf [3] |= 0x10; + else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */ + data_buf [3] |= 0x8; + + /* corresponds to data_buf[4-7] */ + datab [1] = 0; + data_buf [5] = (temp & RH_A_POTPGT) >> 24; + temp = roothub_b (&gohci); + data_buf [7] = temp & RH_B_DR; + if (data_buf [2] < 7) { + data_buf [8] = 0xff; + } else { + data_buf [0] += 2; + data_buf [8] = (temp & RH_B_DR) >> 8; + data_buf [10] = data_buf [9] = 0xff; + } + + len = min_t(unsigned int, leni, + min_t(unsigned int, data_buf [0], wLength)); + OK (len); + } + + case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1); + + case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0); + + default: + dbg ("unsupported root hub command"); + stat = USB_ST_STALLED; + } + +#ifdef DEBUG + ohci_dump_roothub (&gohci, 1); +#else + wait_ms(1); +#endif + + len = min_t(int, len, leni); + if (data != data_buf) + memcpy (data, data_buf, len); + dev->act_len = len; + dev->status = stat; + +#ifdef DEBUG + pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); +#else + wait_ms(1); +#endif + + return stat; +} + +/*-------------------------------------------------------------------------*/ + +/* common code for handling submit messages - used for all but root hub */ +/* accesses. */ +int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, int interval) +{ + int stat = 0; + int maxsize = usb_maxpacket(dev, pipe); + int timeout; + urb_priv_t *urb; + + urb = malloc(sizeof(urb_priv_t)); + memset(urb, 0, sizeof(urb_priv_t)); + + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = buffer; + urb->transfer_buffer_length = transfer_len; + urb->interval = interval; + + /* device pulled? Shortcut the action. */ + if (devgone == dev) { + dev->status = USB_ST_CRC_ERR; + return 0; + } + +#ifdef DEBUG + urb->actual_length = 0; + pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (!maxsize) { + err("submit_common_message: pipesize for pipe %lx is zero", + pipe); + return -1; + } + + if (sohci_submit_job(urb, setup) < 0) { + err("sohci_submit_job failed"); + return -1; + } + +#if 0 + wait_ms(10); + /* ohci_dump_status(&gohci); */ +#endif + + /* allow more time for a BULK device to react - some are slow */ +#define BULK_TO 5000 /* timeout in milliseconds */ + if (usb_pipetype (pipe) == PIPE_BULK) + timeout = BULK_TO; + else + timeout = 100; + + /* wait for it to complete */ + for (;;) { + /* check whether the controller is done */ + stat = hc_interrupt(); + if (stat < 0) { + stat = USB_ST_CRC_ERR; + break; + } + + /* NOTE: since we are not interrupt driven in U-Boot and always + * handle only one URB at a time, we cannot assume the + * transaction finished on the first successful return from + * hc_interrupt().. unless the flag for current URB is set, + * meaning that all TD's to/from device got actually + * transferred and processed. If the current URB is not + * finished we need to re-iterate this loop so as + * hc_interrupt() gets called again as there needs to be some + * more TD's to process still */ + if ((stat >= 0) && (stat != 0xff) && (urb->finished)) { + /* 0xff is returned for an SF-interrupt */ + break; + } + + if (--timeout) { + wait_ms(1); + if (!urb->finished) + dbg("\%"); + + } else { + err("CTL:TIMEOUT "); + dbg("submit_common_msg: TO status %x\n", stat); + urb->finished = 1; + stat = USB_ST_CRC_ERR; + break; + } + } + + dev->status = stat; + dev->act_len = transfer_len; + +#ifdef DEBUG + pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + + /* free TDs in urb_priv */ + if (usb_pipetype (pipe) != PIPE_INTERRUPT) + urb_free_priv (urb); + return 0; +} + +/* submit routines called from usb.c */ +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len) +{ + info("submit_bulk_msg"); + return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0); +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup) +{ + int maxsize = usb_maxpacket(dev, pipe); + + info("submit_control_msg"); +#ifdef DEBUG + pkt_print(NULL, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (!maxsize) { + err("submit_control_message: pipesize for pipe %lx is zero", + pipe); + return -1; + } + if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) { + gohci.rh.dev = dev; + /* root hub - redirect */ + return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len, + setup); + } + + return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0); +} + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, int interval) +{ + info("submit_int_msg"); + return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, + interval); +} + +/*-------------------------------------------------------------------------* + * HC functions + *-------------------------------------------------------------------------*/ + +/* reset the HC and BUS */ + +static int hc_reset (ohci_t *ohci) +{ + int timeout = 30; + int smm_timeout = 50; /* 0,5 sec */ + + dbg("%s\n", __FUNCTION__); + + if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */ + writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */ + info("USB HC TakeOver from SMM"); + while (readl (&ohci->regs->control) & OHCI_CTRL_IR) { + wait_ms (10); + if (--smm_timeout == 0) { + err("USB HC TakeOver failed!"); + return -1; + } + } + } + + /* Disable HC interrupts */ + writel (OHCI_INTR_MIE, &ohci->regs->intrdisable); + + dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n", + ohci->slot_name, + readl(&ohci->regs->control)); + + /* Reset USB (needed by some controllers) */ + ohci->hc_control = 0; + writel (ohci->hc_control, &ohci->regs->control); + + /* HC Reset requires max 10 us delay */ + writel (OHCI_HCR, &ohci->regs->cmdstatus); + while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { + if (--timeout == 0) { + err("USB HC reset timed out!"); + return -1; + } + udelay (1); + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* Start an OHCI controller, set the BUS operational + * enable interrupts + * connect the virtual root hub */ + +static int hc_start (ohci_t * ohci) +{ + __u32 mask; + unsigned int fminterval; + + ohci->disabled = 1; + + /* Tell the controller where the control and bulk lists are + * The lists are empty now. */ + + writel (0, &ohci->regs->ed_controlhead); + writel (0, &ohci->regs->ed_bulkhead); + + writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */ + + fminterval = 0x2edf; + writel ((fminterval * 9) / 10, &ohci->regs->periodicstart); + fminterval |= ((((fminterval - 210) * 6) / 7) << 16); + writel (fminterval, &ohci->regs->fminterval); + writel (0x628, &ohci->regs->lsthresh); + + /* start controller operations */ + ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; + ohci->disabled = 0; + writel (ohci->hc_control, &ohci->regs->control); + + /* disable all interrupts */ + mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | + OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | + OHCI_INTR_OC | OHCI_INTR_MIE); + writel (mask, &ohci->regs->intrdisable); + /* clear all interrupts */ + mask &= ~OHCI_INTR_MIE; + writel (mask, &ohci->regs->intrstatus); + /* Choose the interrupts we care about now - but w/o MIE */ + mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; + writel (mask, &ohci->regs->intrenable); + +#ifdef OHCI_USE_NPS + /* required for AMD-756 and some Mac platforms */ + writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM, + &ohci->regs->roothub.a); + writel (RH_HS_LPSC, &ohci->regs->roothub.status); +#endif /* OHCI_USE_NPS */ + +#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) + /* POTPGT delay is bits 24-31, in 2 ms units. */ + mdelay ((roothub_a (ohci) >> 23) & 0x1fe); + + /* connect the virtual root hub */ + ohci->rh.devnum = 0; + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* Poll USB interrupt. */ +void usb_event_poll(void) +{ + hc_interrupt(); +} + +/* an interrupt happens */ + +static int hc_interrupt (void) +{ + ohci_t *ohci = &gohci; + struct ohci_regs *regs = ohci->regs; + int ints; + int stat = -1; + + if ((ohci->hcca->done_head != 0) && + !(m32_swap (ohci->hcca->done_head) & 0x01)) { + ints = OHCI_INTR_WDH; + } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) { + ohci->disabled++; + err ("%s device removed!", ohci->slot_name); + return -1; + } else if ((ints &= readl (®s->intrenable)) == 0) { + dbg("hc_interrupt: returning..\n"); + return 0xff; + } + + /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */ + + if (ints & OHCI_INTR_RHSC) { + got_rhsc = 1; + stat = 0xff; + } + + if (ints & OHCI_INTR_UE) { + ohci->disabled++; + err ("OHCI Unrecoverable Error, controller usb-%s disabled", + ohci->slot_name); + /* e.g. due to PCI Master/Target Abort */ + +#ifdef DEBUG + ohci_dump (ohci, 1); +#else + wait_ms(1); +#endif + /* FIXME: be optimistic, hope that bug won't repeat often. */ + /* Make some non-interrupt context restart the controller. */ + /* Count and limit the retries though; either hardware or */ + /* software errors can go forever... */ + hc_reset (ohci); + return -1; + } + + if (ints & OHCI_INTR_WDH) { + wait_ms(1); + writel (OHCI_INTR_WDH, ®s->intrdisable); + (void)readl (®s->intrdisable); /* flush */ + stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci)); + writel (OHCI_INTR_WDH, ®s->intrenable); + (void)readl (®s->intrdisable); /* flush */ + } + + if (ints & OHCI_INTR_SO) { + dbg("USB Schedule overrun\n"); + writel (OHCI_INTR_SO, ®s->intrenable); + stat = -1; + } + + /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ + if (ints & OHCI_INTR_SF) { + unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1; + wait_ms(1); + writel (OHCI_INTR_SF, ®s->intrdisable); + if (ohci->ed_rm_list[frame] != NULL) + writel (OHCI_INTR_SF, ®s->intrenable); + stat = 0xff; + } + + writel (ints, ®s->intrstatus); + return stat; +} + +/*-------------------------------------------------------------------------*/ + +/*-------------------------------------------------------------------------*/ + +/* De-allocate all resources.. */ + +static void hc_release_ohci (ohci_t *ohci) +{ + dbg ("USB HC release ohci usb-%s", ohci->slot_name); + + if (!ohci->disabled) + hc_reset (ohci); +} + +/*-------------------------------------------------------------------------*/ + +/* + * low level initalisation routine, called from usb.c + */ +static char ohci_inited = 0; + +int usb_lowlevel_init(void) +{ +#ifdef CONFIG_PCI_OHCI + pci_dev_t pdev; +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant init */ + if(usb_cpu_init()) + return -1; +#endif + +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant init */ + if(usb_board_init()) + return -1; +#endif + memset (&gohci, 0, sizeof (ohci_t)); + + /* align the storage */ + if ((__u32)&ghcca[0] & 0xff) { + err("HCCA not aligned!!"); + return -1; + } + phcca = &ghcca[0]; + info("aligned ghcca %p", phcca); + memset(&ohci_dev, 0, sizeof(struct ohci_device)); + if ((__u32)&ohci_dev.ed[0] & 0x7) { + err("EDs not aligned!!"); + return -1; + } + memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1)); + if ((__u32)gtd & 0x7) { + err("TDs not aligned!!"); + return -1; + } + ptd = gtd; + gohci.hcca = phcca; + memset (phcca, 0, sizeof (struct ohci_hcca)); + + gohci.disabled = 1; + gohci.sleeping = 0; + gohci.irq = -1; +#ifdef CONFIG_PCI_OHCI + pdev = pci_find_devices(ohci_pci_ids, 0); + + if (pdev != -1) { + u16 vid, did; + u32 base; + pci_read_config_word(pdev, PCI_VENDOR_ID, &vid); + pci_read_config_word(pdev, PCI_DEVICE_ID, &did); + printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n", + vid, did, (pdev >> 16) & 0xff, + (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7); + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); + printf("OHCI regs address 0x%08x\n", base); + gohci.regs = (struct ohci_regs *)base; + } else + return -1; +#else + gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE; +#endif + + gohci.flags = 0; + gohci.slot_name = CFG_USB_OHCI_SLOT_NAME; + + if (hc_reset (&gohci) < 0) { + hc_release_ohci (&gohci); + err ("can't reset usb-%s", gohci.slot_name); +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + usb_board_init_fail(); +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + usb_cpu_init_fail(); +#endif + return -1; + } + + /* FIXME this is a second HC reset; why?? */ + /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control); + wait_ms(10); */ + if (hc_start (&gohci) < 0) { + err ("can't start usb-%s", gohci.slot_name); + hc_release_ohci (&gohci); + /* Initialization failed */ +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + usb_board_stop(); +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + usb_cpu_stop(); +#endif + return -1; + } + +#ifdef DEBUG + ohci_dump (&gohci, 1); +#else + wait_ms(1); +#endif + ohci_inited = 1; + return 0; +} + +int usb_lowlevel_stop(void) +{ + /* this gets called really early - before the controller has */ + /* even been initialized! */ + if (!ohci_inited) + return 0; + /* TODO release any interrupts, etc. */ + /* call hc_release_ohci() here ? */ + hc_reset (&gohci); + +#ifdef CFG_USB_OHCI_BOARD_INIT + /* board dependant cleanup */ + if(usb_board_stop()) + return -1; +#endif + +#ifdef CFG_USB_OHCI_CPU_INIT + /* cpu dependant cleanup */ + if(usb_cpu_stop()) + return -1; +#endif + + return 0; +} +#endif /* CONFIG_USB_OHCI_NEW */ diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h new file mode 100644 index 0000000000..380cb4c927 --- /dev/null +++ b/drivers/usb/usb_ohci.h @@ -0,0 +1,445 @@ +/* + * URB OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2001 David Brownell + * + * usb-ohci.h + */ + +/* functions for doing board or CPU specific setup/cleanup */ +extern int usb_board_init(void); +extern int usb_board_stop(void); +extern int usb_board_init_fail(void); + +extern int usb_cpu_init(void); +extern int usb_cpu_stop(void); +extern int usb_cpu_init_fail(void); + + +static int cc_to_error[16] = { + +/* mapping of the OHCI CC status to error codes */ + /* No Error */ 0, + /* CRC Error */ USB_ST_CRC_ERR, + /* Bit Stuff */ USB_ST_BIT_ERR, + /* Data Togg */ USB_ST_CRC_ERR, + /* Stall */ USB_ST_STALLED, + /* DevNotResp */ -1, + /* PIDCheck */ USB_ST_BIT_ERR, + /* UnExpPID */ USB_ST_BIT_ERR, + /* DataOver */ USB_ST_BUF_ERR, + /* DataUnder */ USB_ST_BUF_ERR, + /* reservd */ -1, + /* reservd */ -1, + /* BufferOver */ USB_ST_BUF_ERR, + /* BuffUnder */ USB_ST_BUF_ERR, + /* Not Access */ -1, + /* Not Access */ -1 +}; + +/* ED States */ + +#define ED_NEW 0x00 +#define ED_UNLINK 0x01 +#define ED_OPER 0x02 +#define ED_DEL 0x04 +#define ED_URB_DEL 0x08 + +/* usb_ohci_ed */ +struct ed { + __u32 hwINFO; + __u32 hwTailP; + __u32 hwHeadP; + __u32 hwNextED; + + struct ed *ed_prev; + __u8 int_period; + __u8 int_branch; + __u8 int_load; + __u8 int_interval; + __u8 state; + __u8 type; + __u16 last_iso; + struct ed *ed_rm_list; + + struct usb_device *usb_dev; + void *purb; + __u32 unused[2]; +} __attribute((aligned(16))); +typedef struct ed ed_t; + + +/* TD info field */ +#define TD_CC 0xf0000000 +#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) +#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) +#define TD_EC 0x0C000000 +#define TD_T 0x03000000 +#define TD_T_DATA0 0x02000000 +#define TD_T_DATA1 0x03000000 +#define TD_T_TOGGLE 0x00000000 +#define TD_R 0x00040000 +#define TD_DI 0x00E00000 +#define TD_DI_SET(X) (((X) & 0x07)<< 21) +#define TD_DP 0x00180000 +#define TD_DP_SETUP 0x00000000 +#define TD_DP_IN 0x00100000 +#define TD_DP_OUT 0x00080000 + +#define TD_ISO 0x00010000 +#define TD_DEL 0x00020000 + +/* CC Codes */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +#define TD_UNEXPECTEDPID 0x07 +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D +#define TD_NOTACCESSED 0x0F + + +#define MAXPSW 1 + +struct td { + __u32 hwINFO; + __u32 hwCBP; /* Current Buffer Pointer */ + __u32 hwNextTD; /* Next TD Pointer */ + __u32 hwBE; /* Memory Buffer End Pointer */ + +/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */ + __u16 hwPSW[MAXPSW]; +/* #endif */ + __u8 unused; + __u8 index; + struct ed *ed; + struct td *next_dl_td; + struct usb_device *usb_dev; + int transfer_len; + __u32 data; + + __u32 unused2[2]; +} __attribute((aligned(32))); +typedef struct td td_t; + +#define OHCI_ED_SKIP (1 << 14) + +/* + * The HCCA (Host Controller Communications Area) is a 256 byte + * structure defined in the OHCI spec. that the host controller is + * told the base address of. It must be 256-byte aligned. + */ + +#define NUM_INTS 32 /* part of the OHCI standard */ +struct ohci_hcca { + __u32 int_table[NUM_INTS]; /* Interrupt ED table */ +#if defined(CONFIG_MPC5200) + __u16 pad1; /* set to 0 on each frame_no change */ + __u16 frame_no; /* current frame number */ +#else + __u16 frame_no; /* current frame number */ + __u16 pad1; /* set to 0 on each frame_no change */ +#endif + __u32 done_head; /* info returned for an interrupt */ + u8 reserved_for_hc[116]; +} __attribute((aligned(256))); + + +/* + * Maximum number of root hub ports. + */ +#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS +# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!" +#endif + +/* + * This is the structure of the OHCI controller's memory mapped I/O + * region. This is Memory Mapped I/O. You must use the readl() and + * writel() macros defined in asm/io.h to access these!! + */ +struct ohci_regs { + /* control and status registers */ + __u32 revision; + __u32 control; + __u32 cmdstatus; + __u32 intrstatus; + __u32 intrenable; + __u32 intrdisable; + /* memory pointers */ + __u32 hcca; + __u32 ed_periodcurrent; + __u32 ed_controlhead; + __u32 ed_controlcurrent; + __u32 ed_bulkhead; + __u32 ed_bulkcurrent; + __u32 donehead; + /* frame counters */ + __u32 fminterval; + __u32 fmremaining; + __u32 fmnumber; + __u32 periodicstart; + __u32 lsthresh; + /* Root hub ports */ + struct ohci_roothub_regs { + __u32 a; + __u32 b; + __u32 status; + __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS]; + } roothub; +} __attribute((aligned(32))); + + +/* OHCI CONTROL AND STATUS REGISTER MASKS */ + +/* + * HcControl (control) register masks + */ +#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ +#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ +#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ +#define OHCI_CTRL_CLE (1 << 4) /* control list enable */ +#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ +#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ +#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ +#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ +#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ + +/* pre-shifted values for HCFS */ +# define OHCI_USB_RESET (0 << 6) +# define OHCI_USB_RESUME (1 << 6) +# define OHCI_USB_OPER (2 << 6) +# define OHCI_USB_SUSPEND (3 << 6) + +/* + * HcCommandStatus (cmdstatus) register masks + */ +#define OHCI_HCR (1 << 0) /* host controller reset */ +#define OHCI_CLF (1 << 1) /* control list filled */ +#define OHCI_BLF (1 << 2) /* bulk list filled */ +#define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_SOC (3 << 16) /* scheduling overrun count */ + +/* + * masks used with interrupt registers: + * HcInterruptStatus (intrstatus) + * HcInterruptEnable (intrenable) + * HcInterruptDisable (intrdisable) + */ +#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ +#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ +#define OHCI_INTR_SF (1 << 2) /* start frame */ +#define OHCI_INTR_RD (1 << 3) /* resume detect */ +#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ +#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ +#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ +#define OHCI_INTR_OC (1 << 30) /* ownership change */ +#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ + + +/* Virtual Root HUB */ +struct virt_root_hub { + int devnum; /* Address of Root Hub endpoint */ + void *dev; /* was urb */ + void *int_addr; + int send; + int interval; +}; + +/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */ + +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 + +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 + + +/* OHCI ROOT HUB REGISTER MASKS */ + +/* roothub.portstatus [i] bits */ +#define RH_PS_CCS 0x00000001 /* current connect status */ +#define RH_PS_PES 0x00000002 /* port enable status*/ +#define RH_PS_PSS 0x00000004 /* port suspend status */ +#define RH_PS_POCI 0x00000008 /* port over current indicator */ +#define RH_PS_PRS 0x00000010 /* port reset status */ +#define RH_PS_PPS 0x00000100 /* port power status */ +#define RH_PS_LSDA 0x00000200 /* low speed device attached */ +#define RH_PS_CSC 0x00010000 /* connect status change */ +#define RH_PS_PESC 0x00020000 /* port enable status change */ +#define RH_PS_PSSC 0x00040000 /* port suspend status change */ +#define RH_PS_OCIC 0x00080000 /* over current indicator change */ +#define RH_PS_PRSC 0x00100000 /* port reset status change */ + +/* roothub.status bits */ +#define RH_HS_LPS 0x00000001 /* local power status */ +#define RH_HS_OCI 0x00000002 /* over current indicator */ +#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ +#define RH_HS_LPSC 0x00010000 /* local power status change */ +#define RH_HS_OCIC 0x00020000 /* over current indicator change */ +#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ + +/* roothub.b masks */ +#define RH_B_DR 0x0000ffff /* device removable flags */ +#define RH_B_PPCM 0xffff0000 /* port power control mask */ + +/* roothub.a masks */ +#define RH_A_NDP (0xff << 0) /* number of downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* over current protection mode */ +#define RH_A_NOCP (1 << 12) /* no over current protection */ +#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ + +/* urb */ +#define N_URB_TD 48 +typedef struct +{ + ed_t *ed; + __u16 length; /* number of tds associated with this request */ + __u16 td_cnt; /* number of tds already serviced */ + struct usb_device *dev; + int state; + unsigned long pipe; + void *transfer_buffer; + int transfer_buffer_length; + int interval; + int actual_length; + int finished; + td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */ +} urb_priv_t; +#define URB_DEL 1 + +/* + * This is the full ohci controller description + * + * Note how the "proper" USB information is just + * a subset of what the full implementation needs. (Linus) + */ + + +typedef struct ohci { + struct ohci_hcca *hcca; /* hcca */ + /*dma_addr_t hcca_dma;*/ + + int irq; + int disabled; /* e.g. got a UE, we're hung */ + int sleeping; + unsigned long flags; /* for HC bugs */ + + struct ohci_regs *regs; /* OHCI controller's memory */ + + int ohci_int_load[32]; /* load of the 32 Interrupt Chains (for load balancing)*/ + ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */ + ed_t *ed_bulktail; /* last endpoint of bulk list */ + ed_t *ed_controltail; /* last endpoint of control list */ + int intrstatus; + __u32 hc_control; /* copy of the hc control reg */ + struct usb_device *dev[32]; + struct virt_root_hub rh; + + const char *slot_name; +} ohci_t; + +#define NUM_EDS 8 /* num of preallocated endpoint descriptors */ + +struct ohci_device { + ed_t ed[NUM_EDS]; + int ed_cnt; +}; + +/* hcd */ +/* endpoint */ +static int ep_link(ohci_t * ohci, ed_t * ed); +static int ep_unlink(ohci_t * ohci, ed_t * ed); +static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe, + int interval, int load); + +/*-------------------------------------------------------------------------*/ + +/* we need more TDs than EDs */ +#define NUM_TD 64 + +/* +1 so we can align the storage */ +td_t gtd[NUM_TD+1]; +/* pointers to aligned storage */ +td_t *ptd; + +/* TDs ... */ +static inline struct td * +td_alloc (struct usb_device *usb_dev) +{ + int i; + struct td *td; + + td = NULL; + for (i = 0; i < NUM_TD; i++) + { + if (ptd[i].usb_dev == NULL) + { + td = &ptd[i]; + td->usb_dev = usb_dev; + break; + } + } + + return td; +} + +static inline void +ed_free (struct ed *ed) +{ + ed->usb_dev = NULL; +} diff --git a/drivers/usb/usbdcore.c b/drivers/usb/usbdcore.c new file mode 100644 index 0000000000..308c7ceccc --- /dev/null +++ b/drivers/usb/usbdcore.c @@ -0,0 +1,684 @@ +/* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * + * Based on + * linux/drivers/usbd/usbd.c.c - USB Device Core Layer + * + * Copyright (c) 2000, 2001, 2002 Lineo + * Copyright (c) 2001 Hewlett Packard + * + * By: + * Stuart Lynne , + * Tom Rushworth , + * Bruce Balden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include "usbdcore.h" + +#define MAX_INTERFACES 2 + + +int maxstrings = 20; + +/* Global variables ************************************************************************** */ + +struct usb_string_descriptor **usb_strings; + +int usb_devices; + +extern struct usb_function_driver ep0_driver; + +int registered_functions; +int registered_devices; + +char *usbd_device_events[] = { + "DEVICE_UNKNOWN", + "DEVICE_INIT", + "DEVICE_CREATE", + "DEVICE_HUB_CONFIGURED", + "DEVICE_RESET", + "DEVICE_ADDRESS_ASSIGNED", + "DEVICE_CONFIGURED", + "DEVICE_SET_INTERFACE", + "DEVICE_SET_FEATURE", + "DEVICE_CLEAR_FEATURE", + "DEVICE_DE_CONFIGURED", + "DEVICE_BUS_INACTIVE", + "DEVICE_BUS_ACTIVITY", + "DEVICE_POWER_INTERRUPTION", + "DEVICE_HUB_RESET", + "DEVICE_DESTROY", + "DEVICE_FUNCTION_PRIVATE", +}; + +char *usbd_device_states[] = { + "STATE_INIT", + "STATE_CREATED", + "STATE_ATTACHED", + "STATE_POWERED", + "STATE_DEFAULT", + "STATE_ADDRESSED", + "STATE_CONFIGURED", + "STATE_UNKNOWN", +}; + +char *usbd_device_requests[] = { + "GET STATUS", /* 0 */ + "CLEAR FEATURE", /* 1 */ + "RESERVED", /* 2 */ + "SET FEATURE", /* 3 */ + "RESERVED", /* 4 */ + "SET ADDRESS", /* 5 */ + "GET DESCRIPTOR", /* 6 */ + "SET DESCRIPTOR", /* 7 */ + "GET CONFIGURATION", /* 8 */ + "SET CONFIGURATION", /* 9 */ + "GET INTERFACE", /* 10 */ + "SET INTERFACE", /* 11 */ + "SYNC FRAME", /* 12 */ +}; + +char *usbd_device_descriptors[] = { + "UNKNOWN", /* 0 */ + "DEVICE", /* 1 */ + "CONFIG", /* 2 */ + "STRING", /* 3 */ + "INTERFACE", /* 4 */ + "ENDPOINT", /* 5 */ + "DEVICE QUALIFIER", /* 6 */ + "OTHER SPEED", /* 7 */ + "INTERFACE POWER", /* 8 */ +}; + +char *usbd_device_status[] = { + "USBD_OPENING", + "USBD_OK", + "USBD_SUSPENDED", + "USBD_CLOSING", +}; + + +/* Descriptor support functions ************************************************************** */ + + +/** + * usbd_get_string - find and return a string descriptor + * @index: string index to return + * + * Find an indexed string and return a pointer to a it. + */ +struct usb_string_descriptor *usbd_get_string (__u8 index) +{ + if (index >= maxstrings) { + return NULL; + } + return usb_strings[index]; +} + + +/* Access to device descriptor functions ***************************************************** */ + + +/* * + * usbd_device_configuration_instance - find a configuration instance for this device + * @device: + * @configuration: index to configuration, 0 - N-1 + * + * Get specifed device configuration. Index should be bConfigurationValue-1. + */ +static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device, + unsigned int port, unsigned int configuration) +{ + /* XXX */ + configuration = configuration ? configuration - 1 : 0; + + if (configuration >= device->configurations) { + return NULL; + } + return device->configuration_instance_array + configuration; +} + + +/* * + * usbd_device_interface_instance + * @device: + * @configuration: index to configuration, 0 - N-1 + * @interface: index to interface + * + * Return the specified interface descriptor for the specified device. + */ +struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *device, int port, int configuration, int interface) +{ + struct usb_configuration_instance *configuration_instance; + + if ((configuration_instance = usbd_device_configuration_instance (device, port, configuration)) == NULL) { + return NULL; + } + if (interface >= configuration_instance->interfaces) { + return NULL; + } + return configuration_instance->interface_instance_array + interface; +} + +/* * + * usbd_device_alternate_descriptor_list + * @device: + * @configuration: index to configuration, 0 - N-1 + * @interface: index to interface + * @alternate: alternate setting + * + * Return the specified alternate descriptor for the specified device. + */ +struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *device, int port, int configuration, int interface, int alternate) +{ + struct usb_interface_instance *interface_instance; + + if ((interface_instance = usbd_device_interface_instance (device, port, configuration, interface)) == NULL) { + return NULL; + } + + if (alternate >= interface_instance->alternates) { + return NULL; + } + + return interface_instance->alternates_instance_array + alternate; +} + + +/* * + * usbd_device_device_descriptor + * @device: which device + * @configuration: index to configuration, 0 - N-1 + * @port: which port + * + * Return the specified configuration descriptor for the specified device. + */ +struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port) +{ + return (device->device_descriptor); +} + + +/** + * usbd_device_configuration_descriptor + * @device: which device + * @port: which port + * @configuration: index to configuration, 0 - N-1 + * + * Return the specified configuration descriptor for the specified device. + */ +struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct + usb_device_instance + *device, int port, int configuration) +{ + struct usb_configuration_instance *configuration_instance; + if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) { + return NULL; + } + return (configuration_instance->configuration_descriptor); +} + + +/** + * usbd_device_interface_descriptor + * @device: which device + * @port: which port + * @configuration: index to configuration, 0 - N-1 + * @interface: index to interface + * @alternate: alternate setting + * + * Return the specified interface descriptor for the specified device. + */ +struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance + *device, int port, int configuration, int interface, int alternate) +{ + struct usb_interface_instance *interface_instance; + if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) { + return NULL; + } + if ((alternate < 0) || (alternate >= interface_instance->alternates)) { + return NULL; + } + return (interface_instance->alternates_instance_array[alternate].interface_descriptor); +} + +/** + * usbd_device_endpoint_descriptor_index + * @device: which device + * @port: which port + * @configuration: index to configuration, 0 - N-1 + * @interface: index to interface + * @alternate: index setting + * @index: which index + * + * Return the specified endpoint descriptor for the specified device. + */ +struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance + *device, int port, int configuration, int interface, int alternate, int index) +{ + struct usb_alternate_instance *alternate_instance; + + if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) { + return NULL; + } + if (index >= alternate_instance->endpoints) { + return NULL; + } + return *(alternate_instance->endpoints_descriptor_array + index); +} + + +/** + * usbd_device_endpoint_transfersize + * @device: which device + * @port: which port + * @configuration: index to configuration, 0 - N-1 + * @interface: index to interface + * @index: which index + * + * Return the specified endpoint transfer size; + */ +int usbd_device_endpoint_transfersize (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int index) +{ + struct usb_alternate_instance *alternate_instance; + + if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) { + return 0; + } + if (index >= alternate_instance->endpoints) { + return 0; + } + return *(alternate_instance->endpoint_transfersize_array + index); +} + + +/** + * usbd_device_endpoint_descriptor + * @device: which device + * @port: which port + * @configuration: index to configuration, 0 - N-1 + * @interface: index to interface + * @alternate: alternate setting + * @endpoint: which endpoint + * + * Return the specified endpoint descriptor for the specified device. + */ +struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int endpoint) +{ + struct usb_endpoint_descriptor *endpoint_descriptor; + int i; + + for (i = 0; !(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, configuration, interface, alternate, i)); i++) { + if (endpoint_descriptor->bEndpointAddress == endpoint) { + return endpoint_descriptor; + } + } + return NULL; +} + +/** + * usbd_endpoint_halted + * @device: point to struct usb_device_instance + * @endpoint: endpoint to check + * + * Return non-zero if endpoint is halted. + */ +int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint) +{ + return (device->status == USB_STATUS_HALT); +} + + +/** + * usbd_rcv_complete - complete a receive + * @endpoint: + * @len: + * @urb_bad: + * + * Called from rcv interrupt to complete. + */ +void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad) +{ + if (endpoint) { + struct urb *rcv_urb; + + /*usbdbg("len: %d urb: %p\n", len, endpoint->rcv_urb); */ + + /* if we had an urb then update actual_length, dispatch if neccessary */ + if ((rcv_urb = endpoint->rcv_urb)) { + + /*usbdbg("actual: %d buffer: %d\n", */ + /*rcv_urb->actual_length, rcv_urb->buffer_length); */ + + /* check the urb is ok, are we adding data less than the packetsize */ + if (!urb_bad && (len <= endpoint->rcv_packetSize)) { + /*usbdbg("updating actual_length by %d\n",len); */ + + /* increment the received data size */ + rcv_urb->actual_length += len; + + } else { + usberr(" RECV_ERROR actual: %d buffer: %d urb_bad: %d\n", + rcv_urb->actual_length, rcv_urb->buffer_length, urb_bad); + + rcv_urb->actual_length = 0; + rcv_urb->status = RECV_ERROR; + } + } else { + usberr("no rcv_urb!"); + } + } else { + usberr("no endpoint!"); + } + +} + +/** + * usbd_tx_complete - complete a transmit + * @endpoint: + * @resetart: + * + * Called from tx interrupt to complete. + */ +void usbd_tx_complete (struct usb_endpoint_instance *endpoint) +{ + if (endpoint) { + struct urb *tx_urb; + + /* if we have a tx_urb advance or reset, finish if complete */ + if ((tx_urb = endpoint->tx_urb)) { + int sent = endpoint->last; + endpoint->sent += sent; + endpoint->last -= sent; + + if( (endpoint->tx_urb->actual_length - endpoint->sent) <= 0 ) { + tx_urb->actual_length = 0; + endpoint->sent = 0; + endpoint->last = 0; + + /* Remove from active, save for re-use */ + urb_detach(tx_urb); + urb_append(&endpoint->done, tx_urb); + /*usbdbg("done->next %p, tx_urb %p, done %p", */ + /* endpoint->done.next, tx_urb, &endpoint->done); */ + + endpoint->tx_urb = first_urb_detached(&endpoint->tx); + if( endpoint->tx_urb ) { + endpoint->tx_queue--; + usbdbg("got urb from tx list"); + } + if( !endpoint->tx_urb ) { + /*usbdbg("taking urb from done list"); */ + endpoint->tx_urb = first_urb_detached(&endpoint->done); + } + if( !endpoint->tx_urb ) { + usbdbg("allocating new urb for tx_urb"); + endpoint->tx_urb = usbd_alloc_urb(tx_urb->device, endpoint); + } + } + } + } +} + +/* URB linked list functions ***************************************************** */ + +/* + * Initialize an urb_link to be a single element list. + * If the urb_link is being used as a distinguished list head + * the list is empty when the head is the only link in the list. + */ +void urb_link_init (urb_link * ul) +{ + if (ul) { + ul->prev = ul->next = ul; + } +} + +/* + * Detach an urb_link from a list, and set it + * up as a single element list, so no dangling + * pointers can be followed, and so it can be + * joined to another list if so desired. + */ +void urb_detach (struct urb *urb) +{ + if (urb) { + urb_link *ul = &urb->link; + ul->next->prev = ul->prev; + ul->prev->next = ul->next; + urb_link_init (ul); + } +} + +/* + * Return the first urb_link in a list with a distinguished + * head "hd", or NULL if the list is empty. This will also + * work as a predicate, returning NULL if empty, and non-NULL + * otherwise. + */ +urb_link *first_urb_link (urb_link * hd) +{ + urb_link *nx; + if (NULL != hd && NULL != (nx = hd->next) && nx != hd) { + /* There is at least one element in the list */ + /* (besides the distinguished head). */ + return (nx); + } + /* The list is empty */ + return (NULL); +} + +/* + * Return the first urb in a list with a distinguished + * head "hd", or NULL if the list is empty. + */ +struct urb *first_urb (urb_link * hd) +{ + urb_link *nx; + if (NULL == (nx = first_urb_link (hd))) { + /* The list is empty */ + return (NULL); + } + return (p2surround (struct urb, link, nx)); +} + +/* + * Detach and return the first urb in a list with a distinguished + * head "hd", or NULL if the list is empty. + * + */ +struct urb *first_urb_detached (urb_link * hd) +{ + struct urb *urb; + if ((urb = first_urb (hd))) { + urb_detach (urb); + } + return urb; +} + + +/* + * Append an urb_link (or a whole list of + * urb_links) to the tail of another list + * of urb_links. + */ +void urb_append (urb_link * hd, struct urb *urb) +{ + if (hd && urb) { + urb_link *new = &urb->link; + + /* This allows the new urb to be a list of urbs, */ + /* with new pointing at the first, but the link */ + /* must be initialized. */ + /* Order is important here... */ + urb_link *pul = hd->prev; + new->prev->next = hd; + hd->prev = new->prev; + new->prev = pul; + pul->next = new; + } +} + +/* URB create/destroy functions ***************************************************** */ + +/** + * usbd_alloc_urb - allocate an URB appropriate for specified endpoint + * @device: device instance + * @endpoint: endpoint + * + * Allocate an urb structure. The usb device urb structure is used to + * contain all data associated with a transfer, including a setup packet for + * control transfers. + * + * NOTE: endpoint_address MUST contain a direction flag. + */ +struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint) +{ + struct urb *urb; + + if( !(urb = (struct urb*)malloc(sizeof(struct urb))) ) { + usberr(" F A T A L: malloc(%u) FAILED!!!!", sizeof(struct urb)); + return NULL; + } + + /* Fill in known fields */ + memset(urb, 0, sizeof(struct urb)); + urb->endpoint = endpoint; + urb->device = device; + urb->buffer = (u8*)urb->buffer_data; + urb->buffer_length = sizeof(urb->buffer_data); + + urb_link_init (&urb->link); + + return urb; +} + +/** + * usbd_dealloc_urb - deallocate an URB and associated buffer + * @urb: pointer to an urb structure + * + * Deallocate an urb structure and associated data. + */ +void usbd_dealloc_urb (struct urb *urb) +{ + if (urb) { + free (urb); + } +} + +/* Event signaling functions ***************************************************** */ + +/** + * usbd_device_event - called to respond to various usb events + * @device: pointer to struct device + * @event: event to respond to + * + * Used by a Bus driver to indicate an event. + */ +void usbd_device_event_irq (struct usb_device_instance *device, usb_device_event_t event, int data) +{ + usb_device_state_t state; + + if (!device || !device->bus) { + usberr("(%p,%d) NULL device or device->bus", device, event); + return; + } + + state = device->device_state; + + usbinfo("%s", usbd_device_events[event]); + + switch (event) { + case DEVICE_UNKNOWN: + break; + case DEVICE_INIT: + device->device_state = STATE_INIT; + break; + + case DEVICE_CREATE: + device->device_state = STATE_ATTACHED; + break; + + case DEVICE_HUB_CONFIGURED: + device->device_state = STATE_POWERED; + break; + + case DEVICE_RESET: + device->device_state = STATE_DEFAULT; + device->address = 0; + break; + + case DEVICE_ADDRESS_ASSIGNED: + device->device_state = STATE_ADDRESSED; + break; + + case DEVICE_CONFIGURED: + device->device_state = STATE_CONFIGURED; + break; + + case DEVICE_DE_CONFIGURED: + device->device_state = STATE_ADDRESSED; + break; + + case DEVICE_BUS_INACTIVE: + if (device->status != USBD_CLOSING) { + device->status = USBD_SUSPENDED; + } + break; + case DEVICE_BUS_ACTIVITY: + if (device->status != USBD_CLOSING) { + device->status = USBD_OK; + } + break; + + case DEVICE_SET_INTERFACE: + break; + case DEVICE_SET_FEATURE: + break; + case DEVICE_CLEAR_FEATURE: + break; + + case DEVICE_POWER_INTERRUPTION: + device->device_state = STATE_POWERED; + break; + case DEVICE_HUB_RESET: + device->device_state = STATE_ATTACHED; + break; + case DEVICE_DESTROY: + device->device_state = STATE_UNKNOWN; + break; + + case DEVICE_FUNCTION_PRIVATE: + break; + + default: + usbdbg("event %d - not handled",event); + break; + } + /*usbdbg("%s event: %d oldstate: %d newstate: %d status: %d address: %d", + device->name, event, state, + device->device_state, device->status, device->address); */ + + /* tell the bus interface driver */ + if( device->event ) { + /* usbdbg("calling device->event"); */ + device->event(device, event, data); + } +} diff --git a/drivers/usb/usbdcore_ep0.c b/drivers/usb/usbdcore_ep0.c new file mode 100644 index 0000000000..1e44f322a7 --- /dev/null +++ b/drivers/usb/usbdcore_ep0.c @@ -0,0 +1,607 @@ +/* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * + * (C) Copyright 2006 + * Bryan O'Donoghue, deckard@CodeHermit.ie + * + * Based on + * linux/drivers/usbd/ep0.c + * + * Copyright (c) 2000, 2001, 2002 Lineo + * Copyright (c) 2001 Hewlett Packard + * + * By: + * Stuart Lynne , + * Tom Rushworth , + * Bruce Balden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This is the builtin ep0 control function. It implements all required functionality + * for responding to control requests (SETUP packets). + * + * XXX + * + * Currently we do not pass any SETUP packets (or other) to the configured + * function driver. This may need to change. + * + * XXX + * + * As alluded to above, a simple callback cdc_recv_setup has been implemented + * in the usb_device data structure to facilicate passing + * Common Device Class packets to a function driver. + * + * XXX + */ + +#include + +#if defined(CONFIG_USB_DEVICE) +#include "usbdcore.h" + +#if 0 +#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args) +#else +#define dbg_ep0(lvl,fmt,args...) +#endif + +/* EP0 Configuration Set ********************************************************************* */ + + +/** + * ep0_get_status - fill in URB data with appropriate status + * @device: + * @urb: + * @index: + * @requesttype: + * + */ +static int ep0_get_status (struct usb_device_instance *device, + struct urb *urb, int index, int requesttype) +{ + char *cp; + + urb->actual_length = 2; + cp = (char*)urb->buffer; + cp[0] = cp[1] = 0; + + switch (requesttype) { + case USB_REQ_RECIPIENT_DEVICE: + cp[0] = USB_STATUS_SELFPOWERED; + break; + case USB_REQ_RECIPIENT_INTERFACE: + break; + case USB_REQ_RECIPIENT_ENDPOINT: + cp[0] = usbd_endpoint_halted (device, index); + break; + case USB_REQ_RECIPIENT_OTHER: + urb->actual_length = 0; + default: + break; + } + dbg_ep0 (2, "%02x %02x", cp[0], cp[1]); + return 0; +} + +/** + * ep0_get_one + * @device: + * @urb: + * @result: + * + * Set a single byte value in the urb send buffer. Return non-zero to signal + * a request error. + */ +static int ep0_get_one (struct usb_device_instance *device, struct urb *urb, + __u8 result) +{ + urb->actual_length = 1; /* XXX 2? */ + ((char *) urb->buffer)[0] = result; + return 0; +} + +/** + * copy_config + * @urb: pointer to urb + * @data: pointer to configuration data + * @length: length of data + * + * Copy configuration data to urb transfer buffer if there is room for it. + */ +void copy_config (struct urb *urb, void *data, int max_length, + int max_buf) +{ + int available; + int length; + + /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */ + /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */ + + if (!data) { + dbg_ep0 (1, "data is NULL"); + return; + } + length = max_length; + + if (length > max_length) { + dbg_ep0 (1, "length: %d >= max_length: %d", length, + max_length); + return; + } + /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */ + /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */ + + if ((available = + /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) { + return; + } + /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */ + /* urb->actual_length, urb->buffer_length, max_buf, length, available); */ + + if (length > available) { + length = available; + } + /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */ + /* urb->actual_length, urb->buffer_length, max_buf, length, available); */ + + memcpy (urb->buffer + urb->actual_length, data, length); + urb->actual_length += length; + + dbg_ep0 (3, + "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d", + urb->actual_length, urb->buffer_length, max_buf, max_length, + available); +} + +/** + * ep0_get_descriptor + * @device: + * @urb: + * @max: + * @descriptor_type: + * @index: + * + * Called by ep0_rx_process for a get descriptor device command. Determine what + * descriptor is being requested, copy to send buffer. Return zero if ok to send, + * return non-zero to signal a request error. + */ +static int ep0_get_descriptor (struct usb_device_instance *device, + struct urb *urb, int max, int descriptor_type, + int index) +{ + int port = 0; /* XXX compound device */ + char *cp; + + /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */ + + if (!urb || !urb->buffer || !urb->buffer_length + || (urb->buffer_length < 255)) { + dbg_ep0 (2, "invalid urb %p", urb); + return -1L; + } + + /* setup tx urb */ + urb->actual_length = 0; + cp = (char*)urb->buffer; + + dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type)); + + switch (descriptor_type) { + case USB_DESCRIPTOR_TYPE_DEVICE: + { + struct usb_device_descriptor *device_descriptor; + if (! + (device_descriptor = + usbd_device_device_descriptor (device, port))) { + return -1; + } + /* copy descriptor for this device */ + copy_config (urb, device_descriptor, + sizeof (struct usb_device_descriptor), + max); + + /* correct the correct control endpoint 0 max packet size into the descriptor */ + device_descriptor = + (struct usb_device_descriptor *) urb->buffer; + + } + dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length); + break; + + case USB_DESCRIPTOR_TYPE_CONFIGURATION: + { + struct usb_configuration_descriptor + *configuration_descriptor; + struct usb_device_descriptor *device_descriptor; + if (! + (device_descriptor = + usbd_device_device_descriptor (device, port))) { + return -1; + } + /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */ + if (index > device_descriptor->bNumConfigurations) { + dbg_ep0 (0, "index too large: %d > %d", index, + device_descriptor-> + bNumConfigurations); + return -1; + } + + if (! + (configuration_descriptor = + usbd_device_configuration_descriptor (device, + port, + index))) { + dbg_ep0 (0, + "usbd_device_configuration_descriptor failed: %d", + index); + return -1; + } + dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength)); + copy_config (urb, configuration_descriptor, + + cpu_to_le16(configuration_descriptor->wTotalLength), + max); + } + + break; + + case USB_DESCRIPTOR_TYPE_STRING: + { + struct usb_string_descriptor *string_descriptor; + if (!(string_descriptor = usbd_get_string (index))) { + serial_printf("Invalid string index %d\n", index); + return -1; + } + dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength); + copy_config (urb, string_descriptor, string_descriptor->bLength, max); + } + break; + case USB_DESCRIPTOR_TYPE_INTERFACE: + serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n"); + return -1; + case USB_DESCRIPTOR_TYPE_ENDPOINT: + serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n"); + return -1; + case USB_DESCRIPTOR_TYPE_HID: + { + serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n"); + return -1; /* unsupported at this time */ +#if 0 + int bNumInterface = + le16_to_cpu (urb->device_request.wIndex); + int bAlternateSetting = 0; + int class = 0; + struct usb_class_descriptor *class_descriptor; + + if (!(class_descriptor = + usbd_device_class_descriptor_index (device, + port, 0, + bNumInterface, + bAlternateSetting, + class)) + || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) { + dbg_ep0 (3, "[%d] interface is not HID", + bNumInterface); + return -1; + } + /* copy descriptor for this class */ + copy_config (urb, class_descriptor, + class_descriptor->descriptor.hid.bLength, + max); +#endif + } + break; + case USB_DESCRIPTOR_TYPE_REPORT: + { + serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n"); + return -1; /* unsupported at this time */ +#if 0 + int bNumInterface = + le16_to_cpu (urb->device_request.wIndex); + int bAlternateSetting = 0; + int class = 0; + struct usb_class_report_descriptor *report_descriptor; + + if (!(report_descriptor = + usbd_device_class_report_descriptor_index + (device, port, 0, bNumInterface, + bAlternateSetting, class)) + || report_descriptor->bDescriptorType != + USB_DT_REPORT) { + dbg_ep0 (3, "[%d] descriptor is not REPORT", + bNumInterface); + return -1; + } + /* copy report descriptor for this class */ + /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */ + if (max - urb->actual_length > 0) { + int length = + MIN (report_descriptor->wLength, + max - urb->actual_length); + memcpy (urb->buffer + urb->actual_length, + &report_descriptor->bData[0], length); + urb->actual_length += length; + } +#endif + } + break; + case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER: + { + /* If a USB device supports both a full speed and low speed operation + * we must send a Device_Qualifier descriptor here + */ + return -1; + } + default: + return -1; + } + + + dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d", + urb->buffer, urb->buffer_length, urb->actual_length, + device->bus->endpoint_array[0].tx_packetSize); +/* + if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) { + dbg_ep0(0, "adding null byte"); + urb->buffer[urb->actual_length++] = 0; + dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d", + urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize); + } +*/ + return 0; + +} + +/** + * ep0_recv_setup - called to indicate URB has been received + * @urb: pointer to struct urb + * + * Check if this is a setup packet, process the device request, put results + * back into the urb and return zero or non-zero to indicate success (DATA) + * or failure (STALL). + * + */ +int ep0_recv_setup (struct urb *urb) +{ + /*struct usb_device_request *request = urb->buffer; */ + /*struct usb_device_instance *device = urb->device; */ + + struct usb_device_request *request; + struct usb_device_instance *device; + int address; + + dbg_ep0 (0, "entering ep0_recv_setup()"); + if (!urb || !urb->device) { + dbg_ep0 (3, "invalid URB %p", urb); + return -1; + } + + request = &urb->device_request; + device = urb->device; + + dbg_ep0 (3, "urb: %p device: %p", urb, urb->device); + + + /*dbg_ep0(2, "- - - - - - - - - -"); */ + + dbg_ep0 (2, + "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s", + request->bmRequestType, request->bRequest, + le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex), + le16_to_cpu (request->wLength), + USBD_DEVICE_REQUESTS (request->bRequest)); + + /* handle USB Standard Request (c.f. USB Spec table 9-2) */ + if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { + if(device->device_state <= STATE_CONFIGURED){ + /* Attempt to handle a CDC specific request if we are + * in the configured state. + */ + return device->cdc_recv_setup(request,urb); + } + dbg_ep0 (1, "non standard request: %x", + request->bmRequestType & USB_REQ_TYPE_MASK); + return -1; /* Stall here */ + } + + switch (device->device_state) { + case STATE_CREATED: + case STATE_ATTACHED: + case STATE_POWERED: + /* It actually is important to allow requests in these states, + * Windows will request descriptors before assigning an + * address to the client. + */ + + /*dbg_ep0 (1, "request %s not allowed in this state: %s", */ + /* USBD_DEVICE_REQUESTS(request->bRequest), */ + /* usbd_device_states[device->device_state]); */ + /*return -1; */ + break; + + case STATE_INIT: + case STATE_DEFAULT: + switch (request->bRequest) { + case USB_REQ_GET_STATUS: + case USB_REQ_GET_INTERFACE: + case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */ + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + case USB_REQ_SET_DESCRIPTOR: + /* case USB_REQ_SET_CONFIGURATION: */ + case USB_REQ_SET_INTERFACE: + dbg_ep0 (1, + "request %s not allowed in DEFAULT state: %s", + USBD_DEVICE_REQUESTS (request->bRequest), + usbd_device_states[device->device_state]); + return -1; + + case USB_REQ_SET_CONFIGURATION: + case USB_REQ_SET_ADDRESS: + case USB_REQ_GET_DESCRIPTOR: + case USB_REQ_GET_CONFIGURATION: + break; + } + case STATE_ADDRESSED: + case STATE_CONFIGURED: + break; + case STATE_UNKNOWN: + dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s", + USBD_DEVICE_REQUESTS (request->bRequest), + usbd_device_states[device->device_state]); + return -1; + } + + /* handle all requests that return data (direction bit set on bm RequestType) */ + if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) { + + dbg_ep0 (3, "Device-to-Host"); + + switch (request->bRequest) { + + case USB_REQ_GET_STATUS: + return ep0_get_status (device, urb, request->wIndex, + request->bmRequestType & + USB_REQ_RECIPIENT_MASK); + + case USB_REQ_GET_DESCRIPTOR: + return ep0_get_descriptor (device, urb, + le16_to_cpu (request->wLength), + le16_to_cpu (request->wValue) >> 8, + le16_to_cpu (request->wValue) & 0xff); + + case USB_REQ_GET_CONFIGURATION: + serial_printf("get config %d\n", device->configuration); + return ep0_get_one (device, urb, + device->configuration); + + case USB_REQ_GET_INTERFACE: + return ep0_get_one (device, urb, device->alternate); + + case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */ + return -1; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + case USB_REQ_SET_ADDRESS: + case USB_REQ_SET_DESCRIPTOR: + case USB_REQ_SET_CONFIGURATION: + case USB_REQ_SET_INTERFACE: + return -1; + } + } + /* handle the requests that do not return data */ + else { + + + /*dbg_ep0(3, "Host-to-Device"); */ + switch (request->bRequest) { + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + dbg_ep0 (0, "Host-to-Device"); + switch (request-> + bmRequestType & USB_REQ_RECIPIENT_MASK) { + case USB_REQ_RECIPIENT_DEVICE: + /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */ + /* XXX fall through for now as we do not support either */ + case USB_REQ_RECIPIENT_INTERFACE: + case USB_REQ_RECIPIENT_OTHER: + dbg_ep0 (0, "request %s not", + USBD_DEVICE_REQUESTS (request->bRequest)); + default: + return -1; + + case USB_REQ_RECIPIENT_ENDPOINT: + dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue)); + if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) { + /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */ + /* request->bRequest == USB_REQ_SET_FEATURE); */ + /* NEED TO IMPLEMENT THIS!!! */ + return -1; + } else { + dbg_ep0 (1, "request %s bad wValue: %04x", + USBD_DEVICE_REQUESTS + (request->bRequest), + le16_to_cpu (request->wValue)); + return -1; + } + } + + case USB_REQ_SET_ADDRESS: + /* check if this is a re-address, reset first if it is (this shouldn't be possible) */ + if (device->device_state != STATE_DEFAULT) { + dbg_ep0 (1, "set_address: %02x state: %s", + le16_to_cpu (request->wValue), + usbd_device_states[device->device_state]); + return -1; + } + address = le16_to_cpu (request->wValue); + if ((address & 0x7f) != address) { + dbg_ep0 (1, "invalid address %04x %04x", + address, address & 0x7f); + return -1; + } + device->address = address; + + /*dbg_ep0(2, "address: %d %d %d", */ + /* request->wValue, le16_to_cpu(request->wValue), device->address); */ + + return 0; + + case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */ + dbg_ep0 (0, "set descriptor: NOT SUPPORTED"); + return -1; + + case USB_REQ_SET_CONFIGURATION: + /* c.f. 9.4.7 - the top half of wValue is reserved */ + /* */ + if ((device->configuration = + le16_to_cpu (request->wValue) & 0xFF80) != 0) { + /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */ + /* is the same is configuration zero */ + serial_printf("error setting dev->config to zero!\n"); + device->configuration = 0; /* TBR - ?????? */ + } + /* reset interface and alternate settings */ + device->interface = device->alternate = 0; + + /*dbg_ep0(2, "set configuration: %d", device->configuration); */ + /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */ + return 0; + + case USB_REQ_SET_INTERFACE: + device->interface = le16_to_cpu (request->wIndex); + device->alternate = le16_to_cpu (request->wValue); + /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */ + serial_printf ("DEVICE_SET_INTERFACE.. event?\n"); + return 0; + + case USB_REQ_GET_STATUS: + case USB_REQ_GET_DESCRIPTOR: + case USB_REQ_GET_CONFIGURATION: + case USB_REQ_GET_INTERFACE: + case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */ + return -1; + } + } + return -1; +} + +#endif diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c new file mode 100644 index 0000000000..d4c4096565 --- /dev/null +++ b/drivers/usb/usbdcore_mpc8xx.c @@ -0,0 +1,1401 @@ +/* + * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit + * bodonoghue@CodeHermit.ie + * + * References + * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/* + * Notes : + * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX + * packet to force the USB re-transmit protocol. + * + * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console + * be careful that tracing doesn't create Hiesen-bugs with respect to + * response timeouts to control requests. + * + * 3. This driver should be able to support any higher level driver that + * that wants to do either of the two standard UDC implementations + * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence + * gserial and cdc_acm should work with this code. + * + * 4. NAK events never actually get raised at all, the documentation + * is just wrong ! + * + * 5. For some reason, cbd_datlen is *always* +2 the value it should be. + * this means that having an RX cbd of 16 bytes is not possible, since + * the same size is reported for 14 bytes received as 16 bytes received + * until we can find out why this happens, RX cbds must be limited to 8 + * bytes. TODO: check errata for this behaviour. + * + * 6. Right now this code doesn't support properly powering up with the USB + * cable attached to the USB host my development board the Adder87x doesn't + * have a pull-up fitted to allow this, so it is necessary to power the + * board and *then* attached the USB cable to the host. However somebody + * with a different design in their board may be able to keep the cable + * constantly connected and simply enable/disable a pull-up re + * figure 31.1 in MPC885RM.pdf instead of having to power up the board and + * then attach the cable ! + * + */ +#include +#include + +#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE) +#include +#include "usbdcore.h" +#include "usbdcore_mpc8xx.h" +#include "usbdcore_ep0.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define ERR(fmt, args...)\ + serial_printf("ERROR : [%s] %s:%d: "fmt,\ + __FILE__,__FUNCTION__,__LINE__, ##args) +#ifdef __DEBUG_UDC__ +#define DBG(fmt,args...)\ + serial_printf("[%s] %s:%d: "fmt,\ + __FILE__,__FUNCTION__,__LINE__, ##args) +#else +#define DBG(fmt,args...) +#endif + +/* Static Data */ +#ifdef __SIMULATE_ERROR__ +static char err_poison_test = 0; +#endif +static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS]; +static u32 address_base = STATE_NOT_READY; +static mpc8xx_udc_state_t udc_state = 0; +static struct usb_device_instance *udc_device = 0; +static volatile usb_epb_t *endpoints[MAX_ENDPOINTS]; +static volatile cbd_t *tx_cbd[TX_RING_SIZE]; +static volatile cbd_t *rx_cbd[RX_RING_SIZE]; +static volatile immap_t *immr = 0; +static volatile cpm8xx_t *cp = 0; +static volatile usb_pram_t *usb_paramp = 0; +static volatile usb_t *usbp = 0; +static int rx_ct = 0; +static int tx_ct = 0; + +/* Static Function Declarations */ +static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final); +static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final); +static void mpc8xx_udc_stall (unsigned int ep); +static void mpc8xx_udc_flush_tx_fifo (int epid); +static void mpc8xx_udc_flush_rx_fifo (void); +static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, + struct urb *tx_urb); +static void mpc8xx_udc_dump_request (struct usb_device_request *request); +static void mpc8xx_udc_clock_init (volatile immap_t * immr, + volatile cpm8xx_t * cp); +static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi); +static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_cbd_init (void); +static void mpc8xx_udc_endpoint_init (void); +static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size); +static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment); +static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_set_nak (unsigned int ep); +static short mpc8xx_udc_handle_txerr (void); +static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid); + +/****************************************************************************** + Global Linkage + *****************************************************************************/ + +/* udc_init + * + * Do initial bus gluing + */ +int udc_init (void) +{ + /* Init various pointers */ + immr = (immap_t *) CFG_IMMR; + cp = (cpm8xx_t *) & (immr->im_cpm); + usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]); + usbp = (usb_t *) & (cp->cp_scc[0]); + + memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS)); + + udc_device = 0; + udc_state = STATE_NOT_READY; + + usbp->usmod = 0x00; + usbp->uscom = 0; + + /* Set USB Frame #0, Respond at Address & Get a clock source */ + usbp->usaddr = 0x00; + mpc8xx_udc_clock_init (immr, cp); + + /* PA15, PA14 as perhiperal USBRXD and USBOE */ + immr->im_ioport.iop_padir &= ~0x0003; + immr->im_ioport.iop_papar |= 0x0003; + + /* PC11/PC10 as peripheral USBRXP USBRXN */ + immr->im_ioport.iop_pcso |= 0x0030; + + /* PC7/PC6 as perhiperal USBTXP and USBTXN */ + immr->im_ioport.iop_pcdir |= 0x0300; + immr->im_ioport.iop_pcpar |= 0x0300; + + /* Set the base address */ + address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE); + + /* Initialise endpoints and circular buffers */ + mpc8xx_udc_endpoint_init (); + mpc8xx_udc_cbd_init (); + + /* Assign allocated Dual Port Endpoint descriptors */ + usb_paramp->ep0ptr = (u32) endpoints[0]; + usb_paramp->ep1ptr = (u32) endpoints[1]; + usb_paramp->ep2ptr = (u32) endpoints[2]; + usb_paramp->ep3ptr = (u32) endpoints[3]; + usb_paramp->frame_n = 0; + + DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n", + usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr, + usb_paramp->ep3ptr); + + return 0; +} + +/* udc_irq + * + * Poll for whatever events may have occured + */ +void udc_irq (void) +{ + int epid = 0; + volatile cbd_t *rx_cbdp = 0; + volatile cbd_t *rx_cbdp_base = 0; + + if (udc_state != STATE_READY) { + return; + } + + if (usbp->usber & USB_E_BSY) { + /* This shouldn't happen. If it does then it's a bug ! */ + usbp->usber |= USB_E_BSY; + mpc8xx_udc_flush_rx_fifo (); + } + + /* Scan all RX/Bidirectional Endpoints for RX data. */ + for (epid = 0; epid < MAX_ENDPOINTS; epid++) { + if (!ep_ref[epid].prx) { + continue; + } + rx_cbdp = rx_cbdp_base = ep_ref[epid].prx; + + do { + if (!(rx_cbdp->cbd_sc & RX_BD_E)) { + + if (rx_cbdp->cbd_sc & 0x1F) { + /* Corrupt data discard it. + * Controller has NAK'd this packet. + */ + mpc8xx_udc_clear_rxbd (rx_cbdp); + + } else { + if (!epid) { + mpc8xx_udc_ep0_rx (rx_cbdp); + + } else { + /* Process data */ + mpc8xx_udc_set_nak (epid); + mpc8xx_udc_epn_rx (epid, rx_cbdp); + mpc8xx_udc_clear_rxbd (rx_cbdp); + } + } + + /* Advance RX CBD pointer */ + mpc8xx_udc_advance_rx (&rx_cbdp, epid); + ep_ref[epid].prx = rx_cbdp; + } else { + /* Advance RX CBD pointer */ + mpc8xx_udc_advance_rx (&rx_cbdp, epid); + } + + } while (rx_cbdp != rx_cbdp_base); + } + + /* Handle TX events as appropiate, the correct place to do this is + * in a tx routine. Perhaps TX on epn was pre-empted by ep0 + */ + + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + + if (usbp->usber & (USB_TX_ERRMASK)) { + mpc8xx_udc_handle_txerr (); + } + + /* Switch to the default state, respond at the default address */ + if (usbp->usber & USB_E_RESET) { + usbp->usber |= USB_E_RESET; + usbp->usaddr = 0x00; + udc_device->device_state = STATE_DEFAULT; + } + + /* if(usbp->usber&USB_E_IDLE){ + We could suspend here ! + usbp->usber|=USB_E_IDLE; + DBG("idle state change\n"); + } + if(usbp->usbs){ + We could resume here when IDLE is deasserted ! + Not worth doing, so long as we are self powered though. + } + */ + + return; +} + +/* udc_endpoint_write + * + * Write some data to an endpoint + */ +int udc_endpoint_write (struct usb_endpoint_instance *epi) +{ + int ep = 0; + short epid = 1, unnak = 0, ret = 0; + + if (udc_state != STATE_READY) { + ERR ("invalid udc_state != STATE_READY!\n"); + return -1; + } + + if (!udc_device || !epi) { + return -1; + } + + if (udc_device->device_state != STATE_CONFIGURED) { + return -1; + } + + ep = epi->endpoint_address & 0x03; + if (ep >= MAX_ENDPOINTS) { + return -1; + } + + /* Set NAK for all RX endpoints during TX */ + for (epid = 1; epid < MAX_ENDPOINTS; epid++) { + + /* Don't set NAK on DATA IN/CONTROL endpoints */ + if (ep_ref[epid].sc & USB_DIR_IN) { + continue; + } + + if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) { + unnak |= 1 << epid; + } + + mpc8xx_udc_set_nak (epid); + } + + mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep], + epi->tx_urb); + ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]); + + /* Remove temporary NAK */ + for (epid = 1; epid < MAX_ENDPOINTS; epid++) { + if (unnak & (1 << epid)) { + udc_unset_nak (epid); + } + } + + return ret; +} + +/* mpc8xx_udc_assign_urb + * + * Associate a given urb to an endpoint TX or RX transmit/receive buffers + */ +static int mpc8xx_udc_assign_urb (int ep, char direction) +{ + struct usb_endpoint_instance *epi = 0; + + if (ep >= MAX_ENDPOINTS) { + goto err; + } + epi = &udc_device->bus->endpoint_array[ep]; + if (!epi) { + goto err; + } + + if (!ep_ref[ep].urb) { + ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array); + if (!ep_ref[ep].urb) { + goto err; + } + } else { + ep_ref[ep].urb->actual_length = 0; + } + + switch (direction) { + case USB_DIR_IN: + epi->tx_urb = ep_ref[ep].urb; + break; + case USB_DIR_OUT: + epi->rcv_urb = ep_ref[ep].urb; + break; + default: + goto err; + } + return 0; + + err: + udc_state = STATE_ERROR; + return -1; +} + +/* udc_setup_ep + * + * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram + * Isochronous endpoints aren't yet supported! + */ +void udc_setup_ep (struct usb_device_instance *device, unsigned int ep, + struct usb_endpoint_instance *epi) +{ + uchar direction = 0; + int ep_attrib = 0; + + if (epi && (ep < MAX_ENDPOINTS)) { + + if (ep == 0) { + if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL + || epi->tx_attributes != + USB_ENDPOINT_XFER_CONTROL) { + + /* ep0 must be a control endpoint */ + udc_state = STATE_ERROR; + return; + + } + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize, + epi->rcv_packetSize); + } + usbp->usep[ep] = 0x0000; + return; + } + + if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) { + + direction = 1; + ep_attrib = epi->tx_attributes; + epi->rcv_packetSize = 0; + ep_ref[ep].sc |= USB_DIR_IN; + } else { + + direction = 0; + ep_attrib = epi->rcv_attributes; + epi->tx_packetSize = 0; + ep_ref[ep].sc &= ~USB_DIR_IN; + } + + if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address + & USB_ENDPOINT_DIR_MASK)) { + return; + } + + switch (ep_attrib) { + case USB_ENDPOINT_XFER_CONTROL: + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + mpc8xx_udc_cbd_attach (ep, + epi->tx_packetSize, + epi->rcv_packetSize); + } + usbp->usep[ep] = ep << 12; + epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb; + + break; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + if (direction) { + mpc8xx_udc_cbd_attach (ep, + epi->tx_packetSize, + 0); + } else { + mpc8xx_udc_cbd_attach (ep, + 0, + epi->rcv_packetSize); + } + } + usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8); + + break; + case USB_ENDPOINT_XFER_ISOC: + default: + serial_printf ("Error endpoint attrib %d>3\n", ep_attrib); + udc_state = STATE_ERROR; + break; + } + } + +} + +/* udc_connect + * + * Move state, switch on the USB + */ +void udc_connect (void) +{ + /* Enable pull-up resistor on D+ + * TODO: fit a pull-up resistor to drive SE0 for > 2.5us + */ + + if (udc_state != STATE_ERROR) { + udc_state = STATE_READY; + usbp->usmod |= USMOD_EN; + } +} + +/* udc_disconnect + * + * Disconnect is not used but, is included for completeness + */ +void udc_disconnect (void) +{ + /* Disable pull-up resistor on D- + * TODO: fix a pullup resistor to control this + */ + + if (udc_state != STATE_ERROR) { + udc_state = STATE_NOT_READY; + } + usbp->usmod &= ~USMOD_EN; +} + +/* udc_enable + * + * Grab an EP0 URB, register interest in a subset of USB events + */ +void udc_enable (struct usb_device_instance *device) +{ + if (udc_state == STATE_ERROR) { + return; + } + + udc_device = device; + + if (!ep_ref[0].urb) { + ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array); + } + + /* Register interest in all events except SOF, enable transceiver */ + usbp->usber = 0x03FF; + usbp->usbmr = 0x02F7; + + return; +} + +/* udc_disable + * + * disable the currently hooked device + */ +void udc_disable (void) +{ + int i = 0; + + if (udc_state == STATE_ERROR) { + DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n"); + return; + } + + udc_device = 0; + + for (; i < MAX_ENDPOINTS; i++) { + if (ep_ref[i].urb) { + usbd_dealloc_urb (ep_ref[i].urb); + ep_ref[i].urb = 0; + } + } + + usbp->usbmr = 0x00; + usbp->usmod = ~USMOD_EN; + udc_state = STATE_NOT_READY; +} + +/* udc_startup_events + * + * Enable the specified device + */ +void udc_startup_events (struct usb_device_instance *device) +{ + udc_enable (device); + if (udc_state == STATE_READY) { + usbd_device_event_irq (device, DEVICE_CREATE, 0); + } +} + +/* udc_set_nak + * + * Allow upper layers to signal lower layers should not accept more RX data + * + */ +void udc_set_nak (int epid) +{ + if (epid) { + mpc8xx_udc_set_nak (epid); + } +} + +/* udc_unset_nak + * + * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint. + * Switch off NAKing on this endpoint to accept more data output from host. + * + */ +void udc_unset_nak (int epid) +{ + if (epid > MAX_ENDPOINTS) { + return; + } + + if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) { + usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK); + __asm__ ("eieio"); + } +} + +/****************************************************************************** + Static Linkage +******************************************************************************/ + +/* udc_state_transition_up + * udc_state_transition_down + * + * Helper functions to implement device state changes. The device states and + * the events that transition between them are: + * + * STATE_ATTACHED + * || /\ + * \/ || + * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET + * || /\ + * \/ || + * STATE_POWERED + * || /\ + * \/ || + * DEVICE_RESET DEVICE_POWER_INTERRUPTION + * || /\ + * \/ || + * STATE_DEFAULT + * || /\ + * \/ || + * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET + * || /\ + * \/ || + * STATE_ADDRESSED + * || /\ + * \/ || + * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED + * || /\ + * \/ || + * STATE_CONFIGURED + * + * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED + * to STATE_CONFIGURED) from the specified initial state to the specified final + * state, passing through each intermediate state on the way. If the initial + * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then + * no state transitions will take place. + * + * udc_state_transition_down transitions down (in the direction from + * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the + * specified final state, passing through each intermediate state on the way. + * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final + * state, then no state transitions will take place. + * + */ + +static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial < final) { + switch (initial) { + case STATE_ATTACHED: + usbd_device_event_irq (udc_device, + DEVICE_HUB_CONFIGURED, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_ADDRESS_ASSIGNED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, + 0); + case STATE_CONFIGURED: + break; + default: + break; + } + } +} + +static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial > final) { + switch (initial) { + case STATE_CONFIGURED: + usbd_device_event_irq (udc_device, + DEVICE_DE_CONFIGURED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_POWER_INTERRUPTION, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, + 0); + case STATE_ATTACHED: + break; + default: + break; + } + } +} + +/* mpc8xx_udc_stall + * + * Force returning of STALL tokens on the given endpoint. Protocol or function + * STALL conditions are permissable here + */ +static void mpc8xx_udc_stall (unsigned int ep) +{ + usbp->usep[ep] |= STALL_BITMASK; +} + +/* mpc8xx_udc_set_nak + * + * Force returning of NAK responses for the given endpoint as a kind of very + * simple flow control + */ +static void mpc8xx_udc_set_nak (unsigned int ep) +{ + usbp->usep[ep] |= NAK_BITMASK; + __asm__ ("eieio"); +} + +/* mpc8xx_udc_handle_txerr + * + * Handle errors relevant to TX. Return a status code to allow calling + * indicative of what if anything happened + */ +static short mpc8xx_udc_handle_txerr () +{ + short ep = 0, ret = 0; + + for (; ep < TX_RING_SIZE; ep++) { + if (usbp->usber & (0x10 << ep)) { + + /* Timeout or underrun */ + if (tx_cbd[ep]->cbd_sc & 0x06) { + ret = 1; + mpc8xx_udc_flush_tx_fifo (ep); + + } else { + if (usbp->usep[ep] & STALL_BITMASK) { + if (!ep) { + usbp->usep[ep] &= ~STALL_BITMASK; + } + } /* else NAK */ + } + usbp->usber |= (0x10 << ep); + } + } + return ret; +} + +/* mpc8xx_udc_advance_rx + * + * Advance cbd rx + */ +static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid) +{ + if ((*rx_cbdp)->cbd_sc & RX_BD_W) { + *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR); + + } else { + (*rx_cbdp)++; + } +} + + +/* mpc8xx_udc_flush_tx_fifo + * + * Flush a given TX fifo. Assumes one tx cbd per endpoint + */ +static void mpc8xx_udc_flush_tx_fifo (int epid) +{ + volatile cbd_t *tx_cbdp = 0; + + if (epid > MAX_ENDPOINTS) { + return; + } + + /* TX stop */ + immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01); + __asm__ ("eieio"); + while (immr->im_cpm.cp_cpcr & 0x01); + + usbp->uscom = 0x40 | 0; + + /* reset ring */ + tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR); + tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W); + + + endpoints[epid]->tptr = endpoints[epid]->tbase; + endpoints[epid]->tstate = 0x00; + endpoints[epid]->tbcnt = 0x00; + + /* TX start */ + immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01); + __asm__ ("eieio"); + while (immr->im_cpm.cp_cpcr & 0x01); + + return; +} + +/* mpc8xx_udc_flush_rx_fifo + * + * For the sake of completeness of the namespace, it seems like + * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo(); + * If RX_BD_E is true => a driver bug either here or in an upper layer + * not polling frequently enough. If RX_BD_E is true we have told the host + * we have accepted data but, the CPM found it had no-where to put that data + * which needless to say would be a bad thing. + */ +static void mpc8xx_udc_flush_rx_fifo () +{ + int i = 0; + + for (i = 0; i < RX_RING_SIZE; i++) { + if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { + ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n", + rx_cbd[i], rx_cbd[i]->cbd_datlen, + rx_cbd[i]->cbd_sc); + + } + } + ERR ("BUG : Input over-run\n"); +} + +/* mpc8xx_udc_clear_rxbd + * + * Release control of RX CBD to CP. + */ +static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp) +{ + rx_cbdp->cbd_datlen = 0x0000; + rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I)); + __asm__ ("eieio"); +} + +/* mpc8xx_udc_tx_irq + * + * Parse for tx timeout, control RX or USB reset/busy conditions + * Return -1 on timeout, -2 on fatal error, else return zero + */ +static int mpc8xx_udc_tx_irq (int ep) +{ + int i = 0; + + if (usbp->usber & (USB_TX_ERRMASK)) { + if (mpc8xx_udc_handle_txerr ()) { + /* Timeout, controlling function must retry send */ + return -1; + } + } + + if (usbp->usber & (USB_E_RESET | USB_E_BSY)) { + /* Fatal, abandon TX transaction */ + return -2; + } + + if (usbp->usber & USB_E_RXB) { + for (i = 0; i < RX_RING_SIZE; i++) { + if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { + if ((rx_cbd[i] == ep_ref[0].prx) || ep) { + return -2; + } + } + } + } + + return 0; +} + +/* mpc8xx_udc_ep_tx + * + * Transmit in a re-entrant fashion outbound USB packets. + * Implement retry/timeout mechanism described in USB specification + * Toggle DATA0/DATA1 pids as necessary + * Introduces non-standard tx_retry. The USB standard has no scope for slave + * devices to give up TX, however tx_retry stops us getting stuck in an endless + * TX loop. + */ +static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) +{ + struct urb *urb = epi->tx_urb; + volatile cbd_t *tx_cbdp = 0; + unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0; + int ret = 0; + + if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) { + return -1; + } + + ep = epi->endpoint_address & 0x03; + tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR); + + if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) { + mpc8xx_udc_flush_tx_fifo (ep); + usbp->usber |= USB_E_TXB; + }; + + while (tx_retry++ < 100) { + ret = mpc8xx_udc_tx_irq (ep); + if (ret == -1) { + /* ignore timeout here */ + } else if (ret == -2) { + /* Abandon TX */ + mpc8xx_udc_flush_tx_fifo (ep); + return -1; + } + + tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR); + while (tx_cbdp->cbd_sc & TX_BD_R) { + }; + tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W); + + pkt_len = urb->actual_length - epi->sent; + + if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { + pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); + } + + for (x = 0; x < pkt_len; x++) { + *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) = + urb->buffer[epi->sent + x]; + } + tx_cbdp->cbd_datlen = pkt_len; + tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid); + __asm__ ("eieio"); + +#ifdef __SIMULATE_ERROR__ + if (++err_poison_test == 2) { + err_poison_test = 0; + tx_cbdp->cbd_sc &= ~TX_BD_TC; + } +#endif + + usbp->uscom = (USCOM_STR | ep); + + while (!(usbp->usber & USB_E_TXB)) { + ret = mpc8xx_udc_tx_irq (ep); + if (ret == -1) { + /* TX timeout */ + break; + } else if (ret == -2) { + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + mpc8xx_udc_flush_tx_fifo (ep); + return -1; + } + }; + + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + + /* ACK must be present <= 18bit times from TX */ + if (ret == -1) { + continue; + } + + /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ + epi->sent += pkt_len; + epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); + TOGGLE_TX_PID (ep_ref[ep].pid); + + if (epi->sent >= epi->tx_urb->actual_length) { + + epi->tx_urb->actual_length = 0; + epi->sent = 0; + + if (ep_ref[ep].sc & EP_SEND_ZLP) { + ep_ref[ep].sc &= ~EP_SEND_ZLP; + } else { + return 0; + } + } + } + + ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent, + epi->tx_urb->actual_length); + + return -1; +} + +/* mpc8xx_udc_dump_request + * + * Dump a control request to console + */ +static void mpc8xx_udc_dump_request (struct usb_device_request *request) +{ + DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x " + "wIndex:%04x wLength:%04x ?\n", + request->bmRequestType, + request->bRequest, + request->wValue, request->wIndex, request->wLength); + + return; +} + +/* mpc8xx_udc_ep0_rx_setup + * + * Decode received ep0 SETUP packet. return non-zero on error + */ +static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp) +{ + unsigned int x = 0; + struct urb *purb = ep_ref[0].urb; + struct usb_endpoint_instance *epi = + &udc_device->bus->endpoint_array[0]; + + for (; x < rx_cbdp->cbd_datlen; x++) { + *(((unsigned char *) &ep_ref[0].urb->device_request) + x) = + *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); + } + + mpc8xx_udc_clear_rxbd (rx_cbdp); + + if (ep0_recv_setup (purb)) { + mpc8xx_udc_dump_request (&purb->device_request); + return -1; + } + + if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) + == USB_REQ_HOST2DEVICE) { + + switch (purb->device_request.bRequest) { + case USB_REQ_SET_ADDRESS: + /* Send the Status OUT ZLP */ + ep_ref[0].pid = TX_BD_PID_DATA1; + purb->actual_length = 0; + mpc8xx_udc_init_tx (epi, purb); + mpc8xx_udc_ep_tx (epi); + + /* Move to the addressed state */ + usbp->usaddr = udc_device->address; + mpc8xx_udc_state_transition_up (udc_device->device_state, + STATE_ADDRESSED); + return 0; + + case USB_REQ_SET_CONFIGURATION: + if (!purb->device_request.wValue) { + /* Respond at default address */ + usbp->usaddr = 0x00; + mpc8xx_udc_state_transition_down (udc_device->device_state, + STATE_ADDRESSED); + } else { + /* TODO: Support multiple configurations */ + mpc8xx_udc_state_transition_up (udc_device->device_state, + STATE_CONFIGURED); + for (x = 1; x < MAX_ENDPOINTS; x++) { + if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) { + ep_ref[x].pid = TX_BD_PID_DATA0; + } else { + ep_ref[x].pid = RX_BD_PID_DATA0; + } + /* Set configuration must unstall endpoints */ + usbp->usep[x] &= ~STALL_BITMASK; + } + } + break; + default: + /* CDC/Vendor specific */ + break; + } + + /* Send ZLP as ACK in Status OUT phase */ + ep_ref[0].pid = TX_BD_PID_DATA1; + purb->actual_length = 0; + mpc8xx_udc_init_tx (epi, purb); + mpc8xx_udc_ep_tx (epi); + + } else { + + if (purb->actual_length) { + ep_ref[0].pid = TX_BD_PID_DATA1; + mpc8xx_udc_init_tx (epi, purb); + + if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) { + ep_ref[0].sc |= EP_SEND_ZLP; + } + + if (purb->device_request.wValue == + USB_DESCRIPTOR_TYPE_DEVICE) { + if (le16_to_cpu (purb->device_request.wLength) + > purb->actual_length) { + /* Send EP0_MAX_PACKET_SIZE bytes + * unless correct size requested. + */ + if (purb->actual_length > epi->tx_packetSize) { + purb->actual_length = epi->tx_packetSize; + } + } + } + mpc8xx_udc_ep_tx (epi); + + } else { + /* Corrupt SETUP packet? */ + ERR ("Zero length data or SETUP with DATA-IN phase ?\n"); + return 1; + } + } + return 0; +} + +/* mpc8xx_udc_init_tx + * + * Setup some basic parameters for a TX transaction + */ +static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, + struct urb *tx_urb) +{ + epi->sent = 0; + epi->last = 0; + epi->tx_urb = tx_urb; +} + +/* mpc8xx_udc_ep0_rx + * + * Receive ep0/control USB data. Parse and possibly send a response. + */ +static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp) +{ + if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) { + + /* Unconditionally accept SETUP packets */ + if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) { + mpc8xx_udc_stall (0); + } + + } else { + + mpc8xx_udc_clear_rxbd (rx_cbdp); + + if ((rx_cbdp->cbd_datlen - 2)) { + /* SETUP with a DATA phase + * outside of SETUP packet. + * Reply with STALL. + */ + mpc8xx_udc_stall (0); + } + } +} + +/* mpc8xx_udc_epn_rx + * + * Receive some data from cbd into USB system urb data abstraction + * Upper layers should NAK if there is insufficient RX data space + */ +static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp) +{ + struct usb_endpoint_instance *epi = 0; + struct urb *urb = 0; + unsigned int x = 0; + + if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) { + return 0; + } + + /* USB 2.0 PDF section 8.6.4 + * Discard data with invalid PID it is a resend. + */ + if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) { + return 1; + } + TOGGLE_RX_PID (ep_ref[epid].pid); + + epi = &udc_device->bus->endpoint_array[epid]; + urb = epi->rcv_urb; + + for (; x < (rx_cbdp->cbd_datlen - 2); x++) { + *((unsigned char *) (urb->buffer + urb->actual_length + x)) = + *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); + } + + if (x) { + usbd_rcv_complete (epi, x, 0); + if (ep_ref[epid].urb->status == RECV_ERROR) { + DBG ("RX error unset NAK\n"); + udc_unset_nak (epid); + } + } + return x; +} + +/* mpc8xx_udc_clock_init + * + * Obtain a clock reference for Full Speed Signaling + */ +static void mpc8xx_udc_clock_init (volatile immap_t * immr, + volatile cpm8xx_t * cp) +{ + +#if defined(CFG_USB_EXTC_CLK) + + /* This has been tested with a 48MHz crystal on CLK6 */ + switch (CFG_USB_EXTC_CLK) { + case 1: + immr->im_ioport.iop_papar |= 0x0100; + immr->im_ioport.iop_padir &= ~0x0100; + cp->cp_sicr |= 0x24; + break; + case 2: + immr->im_ioport.iop_papar |= 0x0200; + immr->im_ioport.iop_padir &= ~0x0200; + cp->cp_sicr |= 0x2D; + break; + case 3: + immr->im_ioport.iop_papar |= 0x0400; + immr->im_ioport.iop_padir &= ~0x0400; + cp->cp_sicr |= 0x36; + break; + case 4: + immr->im_ioport.iop_papar |= 0x0800; + immr->im_ioport.iop_padir &= ~0x0800; + cp->cp_sicr |= 0x3F; + break; + default: + udc_state = STATE_ERROR; + break; + } + +#elif defined(CFG_USB_BRGCLK) + + /* This has been tested with brgclk == 50MHz */ + int divisor = 0; + + if (gd->cpu_clk < 48000000L) { + ERR ("brgclk is too slow for full-speed USB!\n"); + udc_state = STATE_ERROR; + return; + } + + /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz) + * but, can /probably/ live with close-ish alternative rates. + */ + divisor = (gd->cpu_clk / 48000000L) - 1; + cp->cp_sicr &= ~0x0000003F; + + switch (CFG_USB_BRGCLK) { + case 1: + cp->cp_brgc1 |= (divisor | CPM_BRG_EN); + cp->cp_sicr &= ~0x2F; + break; + case 2: + cp->cp_brgc2 |= (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x00000009; + break; + case 3: + cp->cp_brgc3 |= (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x00000012; + break; + case 4: + cp->cp_brgc4 = (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x0000001B; + break; + default: + udc_state = STATE_ERROR; + break; + } + +#else +#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined" +#endif + +} + +/* mpc8xx_udc_cbd_attach + * + * attach a cbd to and endpoint + */ +static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size) +{ + + if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) { + udc_state = STATE_ERROR; + return; + } + + if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT || + (!tx_size && !rx_size)) { + udc_state = STATE_ERROR; + return; + } + + /* Attach CBD to appropiate Parameter RAM Endpoint data structure */ + if (rx_size) { + endpoints[ep]->rbase = (u32) rx_cbd[rx_ct]; + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_ct++; + + if (!ep) { + + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; + rx_ct++; + + } else { + rx_ct += 2; + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; + rx_ct++; + } + + /* Where we expect to RX data on this endpoint */ + ep_ref[ep].prx = rx_cbd[rx_ct - 1]; + } else { + + ep_ref[ep].prx = 0; + endpoints[ep]->rbase = 0; + endpoints[ep]->rbptr = 0; + } + + if (tx_size) { + endpoints[ep]->tbase = (u32) tx_cbd[tx_ct]; + endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct]; + tx_ct++; + } else { + endpoints[ep]->tbase = 0; + endpoints[ep]->tbptr = 0; + } + + endpoints[ep]->tstate = 0; + endpoints[ep]->tbcnt = 0; + endpoints[ep]->mrblr = EP_MAX_PKT; + endpoints[ep]->rfcr = 0x18; + endpoints[ep]->tfcr = 0x18; + ep_ref[ep].sc |= EP_ATTACHED; + + DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n", + ep, endpoints[ep]->rbase, endpoints[ep]->rbptr, + endpoints[ep]->tbase, endpoints[ep]->tbptr, + ep_ref[ep].prx); + + return; +} + +/* mpc8xx_udc_cbd_init + * + * Allocate space for a cbd and allocate TX/RX data space + */ +static void mpc8xx_udc_cbd_init (void) +{ + int i = 0; + + for (; i < TX_RING_SIZE; i++) { + tx_cbd[i] = (cbd_t *) + mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); + } + + for (i = 0; i < RX_RING_SIZE; i++) { + rx_cbd[i] = (cbd_t *) + mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); + } + + for (i = 0; i < TX_RING_SIZE; i++) { + tx_cbd[i]->cbd_bufaddr = + mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); + + tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W); + tx_cbd[i]->cbd_datlen = 0x0000; + } + + + for (i = 0; i < RX_RING_SIZE; i++) { + rx_cbd[i]->cbd_bufaddr = + mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); + rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E); + rx_cbd[i]->cbd_datlen = 0x0000; + + } + + return; +} + +/* mpc8xx_udc_endpoint_init + * + * Attach an endpoint to some dpram + */ +static void mpc8xx_udc_endpoint_init (void) +{ + int i = 0; + + for (; i < MAX_ENDPOINTS; i++) { + endpoints[i] = (usb_epb_t *) + mpc8xx_udc_alloc (sizeof (usb_epb_t), 32); + } +} + +/* mpc8xx_udc_alloc + * + * Grab the address of some dpram + */ +static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment) +{ + u32 retaddr = address_base; + + while (retaddr % alignment) { + retaddr++; + } + address_base += data_size; + + return retaddr; +} + +#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */ diff --git a/drivers/usb/usbdcore_omap1510.c b/drivers/usb/usbdcore_omap1510.c new file mode 100644 index 0000000000..84bb936d86 --- /dev/null +++ b/drivers/usb/usbdcore_omap1510.c @@ -0,0 +1,1547 @@ +/* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * + * Based on + * linux/drivers/usb/device/bi/omap.c + * TI OMAP1510 USB bus interface driver + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * (C) Copyright 2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include + +#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE) + +#include +#ifdef CONFIG_OMAP_SX1 +#include +#endif + +#include "usbdcore.h" +#include "usbdcore_omap1510.h" +#include "usbdcore_ep0.h" + + +#define UDC_INIT_MDELAY 80 /* Device settle delay */ +#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */ + +/* Some kind of debugging output... */ +#if 1 +#define UDCDBG(str) +#define UDCDBGA(fmt,args...) +#else /* The bugs still exists... */ +#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__) +#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args) +#endif + +#if 1 +#define UDCREG(name) +#define UDCREGL(name) +#else /* The bugs still exists... */ +#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */ +#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */ +#endif + + +static struct urb *ep0_urb = NULL; + +static struct usb_device_instance *udc_device; /* Used in interrupt handler */ +static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */ +static u32 udc_interrupts = 0; + +static void udc_stall_ep (unsigned int ep_addr); + + +static struct usb_endpoint_instance *omap1510_find_ep (int ep) +{ + int i; + + for (i = 0; i < udc_device->bus->max_endpoints; i++) { + if (udc_device->bus->endpoint_array[i].endpoint_address == ep) + return &udc_device->bus->endpoint_array[i]; + } + return NULL; +} + +/* ************************************************************************** */ +/* IO + */ + +/* + * omap1510_prepare_endpoint_for_rx + * + * This function implements TRM Figure 14-11. + * + * The endpoint to prepare for transfer is specified as a physical endpoint + * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint + * configuration register is checked to see if the endpoint is ISO or not. + * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled. + * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30. + */ +static void omap1510_prepare_endpoint_for_rx (int ep_addr) +{ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr); + if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { + if ((inw (UDC_EP_RX (ep_num)) & + (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) == + UDC_EPn_RX_Valid) { + /* rx endpoint is valid, non-ISO, so enable its FIFO */ + outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); + outw (UDC_Set_FIFO_En, UDC_CTRL); + outw (0, UDC_EP_NUM); + } + } +} + +/* omap1510_configure_endpoints + * + * This function implements TRM Figure 14-10. + */ +static void omap1510_configure_endpoints (struct usb_device_instance *device) +{ + int ep; + struct usb_bus_instance *bus; + struct usb_endpoint_instance *endpoint; + unsigned short ep_ptr; + unsigned short ep_size; + unsigned short ep_isoc; + unsigned short ep_doublebuffer; + int ep_addr; + int packet_size; + int buffer_size; + int attributes; + + bus = device->bus; + + /* There is a dedicated 2048 byte buffer for USB packets that may be + * arbitrarily partitioned among the endpoints on 8-byte boundaries. + * The first 8 bytes are reserved for receiving setup packets on + * endpoint 0. + */ + ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */ + + for (ep = 0; ep < bus->max_endpoints; ep++) { + endpoint = bus->endpoint_array + ep; + ep_addr = endpoint->endpoint_address; + if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + /* IN endpoint */ + packet_size = endpoint->tx_packetSize; + attributes = endpoint->tx_attributes; + } else { + /* OUT endpoint */ + packet_size = endpoint->rcv_packetSize; + attributes = endpoint->rcv_attributes; + } + + switch (packet_size) { + case 0: + ep_size = 0; + break; + case 8: + ep_size = 0; + break; + case 16: + ep_size = 1; + break; + case 32: + ep_size = 2; + break; + case 64: + ep_size = 3; + break; + case 128: + ep_size = 4; + break; + case 256: + ep_size = 5; + break; + case 512: + ep_size = 6; + break; + default: + UDCDBGA ("ep 0x%02x has bad packet size %d", + ep_addr, packet_size); + packet_size = 0; + ep_size = 0; + break; + } + + switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + default: + /* A non-isochronous endpoint may optionally be + * double-buffered. For now we disable + * double-buffering. + */ + ep_doublebuffer = 0; + ep_isoc = 0; + if (packet_size > 64) + packet_size = 0; + if (!ep || !ep_doublebuffer) + buffer_size = packet_size; + else + buffer_size = packet_size * 2; + break; + case USB_ENDPOINT_XFER_ISOC: + /* Isochronous endpoints are always double- + * buffered, but the double-buffering bit + * in the endpoint configuration register + * becomes the msb of the endpoint size so we + * set the double-buffering flag to zero. + */ + ep_doublebuffer = 0; + ep_isoc = 1; + buffer_size = packet_size * 2; + break; + } + + /* check to see if our packet buffer RAM is exhausted */ + if ((ep_ptr + buffer_size) > 2048) { + UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size); + buffer_size = packet_size = 0; + } + + /* force a default configuration for endpoint 0 since it is + * always enabled + */ + if (!ep && ((packet_size < 8) || (packet_size > 64))) { + buffer_size = packet_size = 64; + ep_size = 3; + } + + if (!ep) { + /* configure endpoint 0 */ + outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0); + /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */ + /* ep_ptr, packet_size); */ + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + /* IN endpoint */ + if (packet_size) { + outw ((1 << 15) | (ep_doublebuffer << 14) | + (ep_size << 12) | (ep_isoc << 11) | + (ep_ptr >> 3), + UDC_EP_TX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + UDCDBGA ("IN ep %d buffer offset 0x%03x" + " packet size 0x%03x", + ep_addr & USB_ENDPOINT_NUMBER_MASK, + ep_ptr, packet_size); + } else { + outw (0, + UDC_EP_TX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + } + } else { + /* OUT endpoint */ + if (packet_size) { + outw ((1 << 15) | (ep_doublebuffer << 14) | + (ep_size << 12) | (ep_isoc << 11) | + (ep_ptr >> 3), + UDC_EP_RX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + UDCDBGA ("OUT ep %d buffer offset 0x%03x" + " packet size 0x%03x", + ep_addr & USB_ENDPOINT_NUMBER_MASK, + ep_ptr, packet_size); + } else { + outw (0, + UDC_EP_RX (ep_addr & + USB_ENDPOINT_NUMBER_MASK)); + } + } + ep_ptr += buffer_size; + } +} + +/* omap1510_deconfigure_device + * + * This function balances omap1510_configure_device. + */ +static void omap1510_deconfigure_device (void) +{ + int epnum; + + UDCDBG ("clear Cfg_Lock"); + outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1); + UDCREG (UDC_SYSCON1); + + /* deconfigure all endpoints */ + for (epnum = 1; epnum <= 15; epnum++) { + outw (0, UDC_EP_RX (epnum)); + outw (0, UDC_EP_TX (epnum)); + } +} + +/* omap1510_configure_device + * + * This function implements TRM Figure 14-9. + */ +static void omap1510_configure_device (struct usb_device_instance *device) +{ + omap1510_configure_endpoints (device); + + + /* Figure 14-9 indicates we should enable interrupts here, but we have + * other routines (udc_all_interrupts, udc_suspended_interrupts) to + * do that. + */ + + UDCDBG ("set Cfg_Lock"); + outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1); + UDCREG (UDC_SYSCON1); +} + +/* omap1510_write_noniso_tx_fifo + * + * This function implements TRM Figure 14-30. + * + * If the endpoint has an active tx_urb, then the next packet of data from the + * URB is written to the tx FIFO. The total amount of data in the urb is given + * by urb->actual_length. The maximum amount of data that can be sent in any + * one packet is given by endpoint->tx_packetSize. The number of data bytes + * from this URB that have already been transmitted is given by endpoint->sent. + * endpoint->last is updated by this routine with the number of data bytes + * transmitted in this packet. + * + * In accordance with Figure 14-30, the EP_NUM register must already have been + * written with the value to select the appropriate tx FIFO before this routine + * is called. + */ +static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance + *endpoint) +{ + struct urb *urb = endpoint->tx_urb; + + if (urb) { + unsigned int last, i; + + UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d", + urb->buffer, urb->buffer_length, urb->actual_length); + if ((last = + MIN (urb->actual_length - endpoint->sent, + endpoint->tx_packetSize))) { + u8 *cp = urb->buffer + endpoint->sent; + + UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); + + if (((u32) cp & 1) == 0) { /* word aligned? */ + outsw (UDC_DATA, cp, last >> 1); + } else { /* byte aligned. */ + for (i = 0; i < (last >> 1); i++) { + u16 w = ((u16) cp[2 * i + 1] << 8) | + (u16) cp[2 * i]; + outw (w, UDC_DATA); + } + } + if (last & 1) { + outb (*(cp + last - 1), UDC_DATA); + } + } + endpoint->last = last; + } +} + +/* omap1510_read_noniso_rx_fifo + * + * This function implements TRM Figure 14-28. + * + * If the endpoint has an active rcv_urb, then the next packet of data is read + * from the rcv FIFO and written to rcv_urb->buffer at offset + * rcv_urb->actual_length to append the packet data to the data from any + * previous packets for this transfer. We assume that there is sufficient room + * left in the buffer to hold an entire packet of data. + * + * The return value is the number of bytes read from the FIFO for this packet. + * + * In accordance with Figure 14-28, the EP_NUM register must already have been + * written with the value to select the appropriate rcv FIFO before this routine + * is called. + */ +static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance + *endpoint) +{ + struct urb *urb = endpoint->rcv_urb; + int len = 0; + + if (urb) { + len = inw (UDC_RXFSTAT); + + if (len) { + unsigned char *cp = urb->buffer + urb->actual_length; + + insw (UDC_DATA, cp, len >> 1); + if (len & 1) + *(cp + len - 1) = inb (UDC_DATA); + } + } + return len; +} + +/* omap1510_prepare_for_control_write_status + * + * This function implements TRM Figure 14-17. + * + * We have to deal here with non-autodecoded control writes that haven't already + * been dealt with by ep0_recv_setup. The non-autodecoded standard control + * write requests are: set/clear endpoint feature, set configuration, set + * interface, and set descriptor. ep0_recv_setup handles set/clear requests for + * ENDPOINT_HALT by halting the endpoint for a set request and resetting the + * endpoint for a clear request. ep0_recv_setup returns an error for + * SET_DESCRIPTOR requests which causes them to be terminated with a stall by + * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by + * generating a DEVICE_SET_INTERFACE event. This leaves only the + * SET_CONFIGURATION event for us to deal with here. + * + */ +static void omap1510_prepare_for_control_write_status (struct urb *urb) +{ + struct usb_device_request *request = &urb->device_request;; + + /* check for a SET_CONFIGURATION request */ + if (request->bRequest == USB_REQ_SET_CONFIGURATION) { + int configuration = le16_to_cpu (request->wValue) & 0xff; + unsigned short devstat = inw (UDC_DEVSTAT); + + if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) { + /* device is currently in ADDRESSED state */ + if (configuration) { + /* Assume the specified non-zero configuration + * value is valid and switch to the CONFIGURED + * state. + */ + outw (UDC_Dev_Cfg, UDC_SYSCON2); + } + } else if ((devstat & UDC_CFG) == UDC_CFG) { + /* device is currently in CONFIGURED state */ + if (!configuration) { + /* Switch to ADDRESSED state. */ + outw (UDC_Clr_Cfg, UDC_SYSCON2); + } + } + } + + /* select EP0 tx FIFO */ + outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + /* clear endpoint (no data bytes in status stage) */ + outw (UDC_Clr_EP, UDC_CTRL); + /* enable the EP0 tx FIFO */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the endpoint */ + outw (UDC_EP_Dir, UDC_EP_NUM); +} + +/* udc_state_transition_up + * udc_state_transition_down + * + * Helper functions to implement device state changes. The device states and + * the events that transition between them are: + * + * STATE_ATTACHED + * || /\ + * \/ || + * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET + * || /\ + * \/ || + * STATE_POWERED + * || /\ + * \/ || + * DEVICE_RESET DEVICE_POWER_INTERRUPTION + * || /\ + * \/ || + * STATE_DEFAULT + * || /\ + * \/ || + * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET + * || /\ + * \/ || + * STATE_ADDRESSED + * || /\ + * \/ || + * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED + * || /\ + * \/ || + * STATE_CONFIGURED + * + * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED + * to STATE_CONFIGURED) from the specified initial state to the specified final + * state, passing through each intermediate state on the way. If the initial + * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then + * no state transitions will take place. + * + * udc_state_transition_down transitions down (in the direction from + * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the + * specified final state, passing through each intermediate state on the way. + * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final + * state, then no state transitions will take place. + * + * These functions must only be called with interrupts disabled. + */ +static void udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial < final) { + switch (initial) { + case STATE_ATTACHED: + usbd_device_event_irq (udc_device, + DEVICE_HUB_CONFIGURED, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_ADDRESS_ASSIGNED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, + 0); + case STATE_CONFIGURED: + break; + default: + break; + } + } +} + +static void udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial > final) { + switch (initial) { + case STATE_CONFIGURED: + usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0); + case STATE_ATTACHED: + break; + default: + break; + } + } +} + +/* Handle all device state changes. + * This function implements TRM Figure 14-21. + */ +static void omap1510_udc_state_changed (void) +{ + u16 bits; + u16 devstat = inw (UDC_DEVSTAT); + + UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat); + + bits = devstat ^ udc_devstat; + if (bits) { + if (bits & UDC_ATT) { + if (devstat & UDC_ATT) { + UDCDBG ("device attached and powered"); + udc_state_transition_up (udc_device->device_state, STATE_POWERED); + } else { + UDCDBG ("device detached or unpowered"); + udc_state_transition_down (udc_device->device_state, STATE_ATTACHED); + } + } + if (bits & UDC_USB_Reset) { + if (devstat & UDC_USB_Reset) { + UDCDBG ("device reset in progess"); + udc_state_transition_down (udc_device->device_state, STATE_POWERED); + } else { + UDCDBG ("device reset completed"); + } + } + if (bits & UDC_DEF) { + if (devstat & UDC_DEF) { + UDCDBG ("device entering default state"); + udc_state_transition_up (udc_device->device_state, STATE_DEFAULT); + } else { + UDCDBG ("device leaving default state"); + udc_state_transition_down (udc_device->device_state, STATE_POWERED); + } + } + if (bits & UDC_SUS) { + if (devstat & UDC_SUS) { + UDCDBG ("entering suspended state"); + usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0); + } else { + UDCDBG ("leaving suspended state"); + usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0); + } + } + if (bits & UDC_R_WK_OK) { + UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK) + ? "enabled" : "disabled"); + } + if (bits & UDC_ADD) { + if (devstat & UDC_ADD) { + UDCDBG ("default -> addressed"); + udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED); + } else { + UDCDBG ("addressed -> default"); + udc_state_transition_down (udc_device->device_state, STATE_DEFAULT); + } + } + if (bits & UDC_CFG) { + if (devstat & UDC_CFG) { + UDCDBG ("device configured"); + /* The ep0_recv_setup function generates the + * DEVICE_CONFIGURED event when a + * USB_REQ_SET_CONFIGURATION setup packet is + * received, so we should already be in the + * state STATE_CONFIGURED. + */ + udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED); + } else { + UDCDBG ("device deconfigured"); + udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED); + } + } + } + + /* Clear interrupt source */ + outw (UDC_DS_Chg, UDC_IRQ_SRC); + + /* Save current DEVSTAT */ + udc_devstat = devstat; +} + +/* Handle SETUP USB interrupt. + * This function implements TRM Figure 14-14. + */ +static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint) +{ + UDCDBG ("-> Entering device setup"); + + do { + const int setup_pktsize = 8; + unsigned char *datap = + (unsigned char *) &ep0_urb->device_request; + + /* Gain access to EP 0 setup FIFO */ + outw (UDC_Setup_Sel, UDC_EP_NUM); + + /* Read control request data */ + insb (UDC_DATA, datap, setup_pktsize); + + UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]", + *(datap + 0), *(datap + 1), *(datap + 2), + *(datap + 3), *(datap + 4), *(datap + 5), + *(datap + 6), *(datap + 7)); + + /* Reset EP0 setup FIFO */ + outw (0, UDC_EP_NUM); + } while (inw (UDC_IRQ_SRC) & UDC_Setup); + + /* Try to process setup packet */ + if (ep0_recv_setup (ep0_urb)) { + /* Not a setup packet, stall next EP0 transaction */ + udc_stall_ep (0); + UDCDBG ("can't parse setup packet, still waiting for setup"); + return; + } + + /* Check direction */ + if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) + == USB_REQ_HOST2DEVICE) { + UDCDBG ("control write on EP0"); + if (le16_to_cpu (ep0_urb->device_request.wLength)) { + /* We don't support control write data stages. + * The only standard control write request with a data + * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't + * support that so we just stall those requests. A + * function driver might support a non-standard + * write request with a data stage, but it isn't + * obvious what we would do with the data if we read it + * so we'll just stall it. It seems like the API isn't + * quite right here. + */ +#if 0 + /* Here is what we would do if we did support control + * write data stages. + */ + ep0_urb->actual_length = 0; + outw (0, UDC_EP_NUM); + /* enable the EP0 rx FIFO */ + outw (UDC_Set_FIFO_En, UDC_CTRL); +#else + /* Stall this request */ + UDCDBG ("Stalling unsupported EP0 control write data " + "stage."); + udc_stall_ep (0); +#endif + } else { + omap1510_prepare_for_control_write_status (ep0_urb); + } + } else { + UDCDBG ("control read on EP0"); + /* The ep0_recv_setup function has already placed our response + * packet data in ep0_urb->buffer and the packet length in + * ep0_urb->actual_length. + */ + endpoint->tx_urb = ep0_urb; + endpoint->sent = 0; + /* select the EP0 tx FIFO */ + outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo + * will update endpoint->last with the number of bytes written + * to the FIFO. + */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable the FIFO to start the packet transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the EP0 tx FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } + + UDCDBG ("<- Leaving device setup"); +} + +/* Handle endpoint 0 RX interrupt + * This routine implements TRM Figure 14-16. + */ +static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint) +{ + unsigned short status; + + UDCDBG ("RX on EP0"); + /* select EP0 rx FIFO */ + outw (UDC_EP_Sel, UDC_EP_NUM); + + status = inw (UDC_STAT_FLG); + + if (status & UDC_ACK) { + /* Check direction */ + if ((ep0_urb->device_request.bmRequestType + & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { + /* This rx interrupt must be for a control write data + * stage packet. + * + * We don't support control write data stages. + * We should never end up here. + */ + + /* clear the EP0 rx FIFO */ + outw (UDC_Clr_EP, UDC_CTRL); + + /* deselect the EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + + UDCDBG ("Stalling unexpected EP0 control write " + "data stage packet"); + udc_stall_ep (0); + } else { + /* This rx interrupt must be for a control read status + * stage packet. + */ + UDCDBG ("ACK on EP0 control read status stage packet"); + /* deselect EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + } + } else if (status & UDC_STALL) { + UDCDBG ("EP0 stall during RX"); + /* deselect EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + } else { + /* deselect EP0 rx FIFO */ + outw (0, UDC_EP_NUM); + } +} + +/* Handle endpoint 0 TX interrupt + * This routine implements TRM Figure 14-18. + */ +static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint) +{ + unsigned short status; + struct usb_device_request *request = &ep0_urb->device_request; + + UDCDBG ("TX on EP0"); + /* select EP0 TX FIFO */ + outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + + status = inw (UDC_STAT_FLG); + if (status & UDC_ACK) { + /* Check direction */ + if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == + USB_REQ_HOST2DEVICE) { + /* This tx interrupt must be for a control write status + * stage packet. + */ + UDCDBG ("ACK on EP0 control write status stage packet"); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } else { + /* This tx interrupt must be for a control read data + * stage packet. + */ + int wLength = le16_to_cpu (request->wLength); + + /* Update our count of bytes sent so far in this + * transfer. + */ + endpoint->sent += endpoint->last; + + /* We are finished with this transfer if we have sent + * all of the bytes in our tx urb (urb->actual_length) + * unless we need a zero-length terminating packet. We + * need a zero-length terminating packet if we returned + * fewer bytes than were requested (wLength) by the host, + * and the number of bytes we returned is an exact + * multiple of the packet size endpoint->tx_packetSize. + */ + if ((endpoint->sent == ep0_urb->actual_length) + && ((ep0_urb->actual_length == wLength) + || (endpoint->last != + endpoint->tx_packetSize))) { + /* Done with control read data stage. */ + UDCDBG ("control read data stage complete"); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + /* select EP0 RX FIFO to prepare for control + * read status stage. + */ + outw (UDC_EP_Sel, UDC_EP_NUM); + /* clear the EP0 RX FIFO */ + outw (UDC_Clr_EP, UDC_CTRL); + /* enable the EP0 RX FIFO */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the EP0 RX FIFO */ + outw (0, UDC_EP_NUM); + } else { + /* We still have another packet of data to send + * in this control read data stage or else we + * need a zero-length terminating packet. + */ + UDCDBG ("ACK control read data stage packet"); + omap1510_write_noniso_tx_fifo (endpoint); + /* enable the EP0 tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } + } + } else if (status & UDC_STALL) { + UDCDBG ("EP0 stall during TX"); + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } else { + /* deselect EP0 TX FIFO */ + outw (UDC_EP_Dir, UDC_EP_NUM); + } +} + +/* Handle RX transaction on non-ISO endpoint. + * This function implements TRM Figure 14-27. + * The ep argument is a physical endpoint number for a non-ISO OUT endpoint + * in the range 1 to 15. + */ +static void omap1510_udc_epn_rx (int ep) +{ + unsigned short status; + + /* Check endpoint status */ + status = inw (UDC_STAT_FLG); + + if (status & UDC_ACK) { + int nbytes; + struct usb_endpoint_instance *endpoint = + omap1510_find_ep (ep); + + nbytes = omap1510_read_noniso_rx_fifo (endpoint); + usbd_rcv_complete (endpoint, nbytes, 0); + + /* enable rx FIFO to prepare for next packet */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + } else if (status & UDC_STALL) { + UDCDBGA ("STALL on RX endpoint %d", ep); + } else if (status & UDC_NAK) { + UDCDBGA ("NAK on RX ep %d", ep); + } else { + serial_printf ("omap-bi: RX on ep %d with status %x", ep, + status); + } +} + +/* Handle TX transaction on non-ISO endpoint. + * This function implements TRM Figure 14-29. + * The ep argument is a physical endpoint number for a non-ISO IN endpoint + * in the range 16 to 30. + */ +static void omap1510_udc_epn_tx (int ep) +{ + unsigned short status; + + /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */ + + /* Check endpoint status */ + status = inw (UDC_STAT_FLG); + + if (status & UDC_ACK) { + struct usb_endpoint_instance *endpoint = + omap1510_find_ep (ep); + + /* We need to transmit a terminating zero-length packet now if + * we have sent all of the data in this URB and the transfer + * size was an exact multiple of the packet size. + */ + if (endpoint->tx_urb + && (endpoint->last == endpoint->tx_packetSize) + && (endpoint->tx_urb->actual_length - endpoint->sent - + endpoint->last == 0)) { + /* Prepare to transmit a zero-length packet. */ + endpoint->sent += endpoint->last; + /* write 0 bytes of data to FIFO */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + } else if (endpoint->tx_urb + && endpoint->tx_urb->actual_length) { + /* retire the data that was just sent */ + usbd_tx_complete (endpoint); + /* Check to see if we have more data ready to transmit + * now. + */ + if (endpoint->tx_urb + && endpoint->tx_urb->actual_length) { + /* write data to FIFO */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + } + } + } else if (status & UDC_STALL) { + UDCDBGA ("STALL on TX endpoint %d", ep); + } else if (status & UDC_NAK) { + UDCDBGA ("NAK on TX endpoint %d", ep); + } else { + /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */ + } +} + + +/* +------------------------------------------------------------------------------- +*/ + +/* Handle general USB interrupts and dispatch according to type. + * This function implements TRM Figure 14-13. + */ +void omap1510_udc_irq (void) +{ + u16 irq_src = inw (UDC_IRQ_SRC); + int valid_irq = 0; + + if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */ + return; + + UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src); + /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */ + + if (irq_src & UDC_DS_Chg) { + /* Device status changed */ + omap1510_udc_state_changed (); + valid_irq++; + } + if (irq_src & UDC_EP0_RX) { + /* Endpoint 0 receive */ + outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */ + omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0); + valid_irq++; + } + if (irq_src & UDC_EP0_TX) { + /* Endpoint 0 transmit */ + outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */ + omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0); + valid_irq++; + } + if (irq_src & UDC_Setup) { + /* Device setup */ + omap1510_udc_setup (udc_device->bus->endpoint_array + 0); + valid_irq++; + } + /*if (!valid_irq) */ + /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */ + UDCDBGA ("< IRQ #%d end >", udc_interrupts); + udc_interrupts++; +} + +/* This function implements TRM Figure 14-26. */ +void omap1510_udc_noniso_irq (void) +{ + unsigned short epnum; + unsigned short irq_src = inw (UDC_IRQ_SRC); + int valid_irq = 0; + + if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX))) + return; + + UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC)); + + if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */ + /* Determine the endpoint number for this interrupt */ + epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8; + UDCDBGA ("RX on ep %x", epnum); + + /* acknowledge interrupt */ + outw (UDC_EPn_RX, UDC_IRQ_SRC); + + if (epnum) { + /* select the endpoint FIFO */ + outw (UDC_EP_Sel | epnum, UDC_EP_NUM); + + omap1510_udc_epn_rx (epnum); + + /* deselect the endpoint FIFO */ + outw (epnum, UDC_EP_NUM); + } + valid_irq++; + } + if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */ + /* Determine the endpoint number for this interrupt */ + epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN; + UDCDBGA ("TX on ep %x", epnum); + + /* acknowledge interrupt */ + outw (UDC_EPn_TX, UDC_IRQ_SRC); + + if (epnum) { + /* select the endpoint FIFO */ + outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); + + omap1510_udc_epn_tx (epnum); + + /* deselect the endpoint FIFO */ + outw (UDC_EP_Dir | epnum, UDC_EP_NUM); + } + valid_irq++; + } + if (!valid_irq) + serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n", + irq_src); +} + +/* +------------------------------------------------------------------------------- +*/ + + +/* + * Start of public functions. + */ + +/* Called to start packet transmission. */ +void udc_endpoint_write (struct usb_endpoint_instance *endpoint) +{ + unsigned short epnum = + endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("Starting transmit on ep %x", epnum); + + if (endpoint->tx_urb) { + /* select the endpoint FIFO */ + outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); + /* write data to FIFO */ + omap1510_write_noniso_tx_fifo (endpoint); + /* enable tx FIFO to start transmission */ + outw (UDC_Set_FIFO_En, UDC_CTRL); + /* deselect the endpoint FIFO */ + outw (UDC_EP_Dir | epnum, UDC_EP_NUM); + } +} + +/* Start to initialize h/w stuff */ +int udc_init (void) +{ + u16 udc_rev; + uchar value; + ulong gpio; + int i; + + /* Let the device settle down before we start */ + for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); + + udc_device = NULL; + + UDCDBG ("starting"); + + /* Check peripheral reset. Must be 1 to make sure + MPU TIPB peripheral reset is inactive */ + UDCREG (ARM_RSTCT2); + + /* Set and check clock control. + * We might ought to be using the clock control API to do + * this instead of fiddling with the clock registers directly + * here. + */ + outw ((1 << 4) | (1 << 5), CLOCK_CTRL); + UDCREG (CLOCK_CTRL); + /* Set and check APLL */ + outw (0x0008, APLL_CTRL); + UDCREG (APLL_CTRL); + /* Set and check DPLL */ + outw (0x2210, DPLL_CTRL); + UDCREG (DPLL_CTRL); + /* Set and check SOFT */ + outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ); + /* Short delay to wait for DPLL */ + udelay (1000); + + /* Print banner with device revision */ + udc_rev = inw (UDC_REV) & 0xff; + printf ("USB: TI OMAP1510 USB function module rev %d.%d\n", + udc_rev >> 4, udc_rev & 0xf); + +#ifdef CONFIG_OMAP_SX1 + i2c_read (0x32, 0x04, 1, &value, 1); + value |= 0x04; + i2c_write (0x32, 0x04, 1, &value, 1); + + i2c_read (0x32, 0x03, 1, &value, 1); + value |= 0x01; + i2c_write (0x32, 0x03, 1, &value, 1); + + gpio = inl(GPIO_PIN_CONTROL_REG); + gpio |= 0x0002; /* A_IRDA_OFF */ + gpio |= 0x0800; /* A_SWITCH */ + gpio |= 0x8000; /* A_USB_ON */ + outl (gpio, GPIO_PIN_CONTROL_REG); + + gpio = inl(GPIO_DIR_CONTROL_REG); + gpio &= ~0x0002; /* A_IRDA_OFF */ + gpio &= ~0x0800; /* A_SWITCH */ + gpio &= ~0x8000; /* A_USB_ON */ + outl (gpio, GPIO_DIR_CONTROL_REG); + + gpio = inl(GPIO_DATA_OUTPUT_REG); + gpio |= 0x0002; /* A_IRDA_OFF */ + gpio &= ~0x0800; /* A_SWITCH */ + gpio &= ~0x8000; /* A_USB_ON */ + outl (gpio, GPIO_DATA_OUTPUT_REG); +#endif + + /* The VBUS_MODE bit selects whether VBUS detection is done via + * software (1) or hardware (0). When software detection is + * selected, VBUS_CTRL selects whether USB is not connected (0) + * or connected (1). + */ + outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); + outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); + UDCREGL (FUNC_MUX_CTRL_0); + + /* + * At this point, device is ready for configuration... + */ + + UDCDBG ("disable USB interrupts"); + outw (0, UDC_IRQ_EN); + UDCREG (UDC_IRQ_EN); + + UDCDBG ("disable USB DMA"); + outw (0, UDC_DMA_IRQ_EN); + UDCREG (UDC_DMA_IRQ_EN); + + UDCDBG ("initialize SYSCON1"); + outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1); + UDCREG (UDC_SYSCON1); + + return 0; +} + +/* Stall endpoint */ +static void udc_stall_ep (unsigned int ep_addr) +{ + /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("stall ep_addr %d", ep_addr); + + /* REVISIT? + * The OMAP TRM section 14.2.4.2 says we must check that the FIFO + * is empty before halting the endpoint. The current implementation + * doesn't check that the FIFO is empty. + */ + + if (!ep_num) { + outw (UDC_Stall_Cmd, UDC_SYSCON2); + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { + if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { + /* we have a valid rx endpoint, so halt it */ + outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); + outw (UDC_Set_Halt, UDC_CTRL); + outw (ep_num, UDC_EP_NUM); + } + } else { + if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { + /* we have a valid tx endpoint, so halt it */ + outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM); + outw (UDC_Set_Halt, UDC_CTRL); + outw (ep_num, UDC_EP_NUM); + } + } +} + +/* Reset endpoint */ +#if 0 +static void udc_reset_ep (unsigned int ep_addr) +{ + /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + + UDCDBGA ("reset ep_addr %d", ep_addr); + + if (!ep_num) { + /* control endpoint 0 can't be reset */ + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { + UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num, + inw (UDC_EP_RX (ep_num))); + if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { + /* we have a valid rx endpoint, so reset it */ + outw (ep_num | UDC_EP_Sel, UDC_EP_NUM); + outw (UDC_Reset_EP, UDC_CTRL); + outw (ep_num, UDC_EP_NUM); + UDCDBGA ("OUT endpoint %d reset", ep_num); + } + } else { + UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num, + inw (UDC_EP_TX (ep_num))); + /* Resetting of tx endpoints seems to be causing the USB function + * module to fail, which causes problems when the driver is + * uninstalled. We'll skip resetting tx endpoints for now until + * we figure out what the problem is. + */ +#if 0 + if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { + /* we have a valid tx endpoint, so reset it */ + outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); + outw (UDC_Reset_EP, UDC_CTRL); + outw (ep_num | UDC_EP_Dir, UDC_EP_NUM); + UDCDBGA ("IN endpoint %d reset", ep_num); + } +#endif + } +} +#endif + +/* ************************************************************************** */ + +/** + * udc_check_ep - check logical endpoint + * + * Return physical endpoint number to use for this logical endpoint or zero if not valid. + */ +#if 0 +int udc_check_ep (int logical_endpoint, int packetsize) +{ + if ((logical_endpoint == 0x80) || + ((logical_endpoint & 0x8f) != logical_endpoint)) { + return 0; + } + + switch (packetsize) { + case 8: + case 16: + case 32: + case 64: + case 128: + case 256: + case 512: + break; + default: + return 0; + } + + return EP_ADDR_TO_PHYS_EP (logical_endpoint); +} +#endif + +/* + * udc_setup_ep - setup endpoint + * + * Associate a physical endpoint with endpoint_instance + */ +void udc_setup_ep (struct usb_device_instance *device, + unsigned int ep, struct usb_endpoint_instance *endpoint) +{ + UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address); + + /* This routine gets called by bi_modinit for endpoint 0 and from + * bi_config for all of the other endpoints. bi_config gets called + * during the DEVICE_CREATE, DEVICE_CONFIGURED, and + * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet + * RAM after bi_config scans the selected device configuration and + * initializes the endpoint structures, but before this routine enables + * the OUT endpoint FIFOs. Since bi_config calls this routine in a + * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our + * packet RAM here when ep==1. + * I really hate to do this here, but it seems like the API exported + * by the USB bus interface controller driver to the usbd-bi module + * isn't quite right so there is no good place to do this. + */ + if (ep == 1) { + omap1510_deconfigure_device (); + omap1510_configure_device (device); + } + + if (endpoint && (ep < UDC_MAX_ENDPOINTS)) { + int ep_addr = endpoint->endpoint_address; + + if (!ep_addr) { + /* nothing to do for endpoint 0 */ + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + /* nothing to do for IN (tx) endpoints */ + } else { /* OUT (rx) endpoint */ + if (endpoint->rcv_packetSize) { + /*struct urb* urb = &(urb_out_array[ep&0xFF]); */ + /*urb->endpoint = endpoint; */ + /*urb->device = device; */ + /*urb->buffer_length = sizeof(urb->buffer); */ + + /*endpoint->rcv_urb = urb; */ + omap1510_prepare_endpoint_for_rx (ep_addr); + } + } + } +} + +/** + * udc_disable_ep - disable endpoint + * @ep: + * + * Disable specified endpoint + */ +#if 0 +void udc_disable_ep (unsigned int ep_addr) +{ + /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ + int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; + struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */ + + UDCDBGA ("disable ep_addr %d", ep_addr); + + if (!ep_num) { + /* nothing to do for endpoint 0 */ ; + } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + if (endpoint->tx_packetSize) { + /* we have a valid tx endpoint */ + /*usbd_flush_tx(endpoint); */ + endpoint->tx_urb = NULL; + } + } else { + if (endpoint->rcv_packetSize) { + /* we have a valid rx endpoint */ + /*usbd_flush_rcv(endpoint); */ + endpoint->rcv_urb = NULL; + } + } +} +#endif + +/* ************************************************************************** */ + +/** + * udc_connected - is the USB cable connected + * + * Return non-zero if cable is connected. + */ +#if 0 +int udc_connected (void) +{ + return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); +} +#endif + +/* Turn on the USB connection by enabling the pullup resistor */ +void udc_connect (void) +{ + UDCDBG ("connect, enable Pullup"); + outl (0x00000018, FUNC_MUX_CTRL_D); +} + +/* Turn off the USB connection by disabling the pullup resistor */ +void udc_disconnect (void) +{ + UDCDBG ("disconnect, disable Pullup"); + outl (0x00000000, FUNC_MUX_CTRL_D); +} + +/* ************************************************************************** */ + + +/* + * udc_disable_interrupts - disable interrupts + * switch off interrupts + */ +#if 0 +void udc_disable_interrupts (struct usb_device_instance *device) +{ + UDCDBG ("disabling all interrupts"); + outw (0, UDC_IRQ_EN); +} +#endif + +/* ************************************************************************** */ + +/** + * udc_ep0_packetsize - return ep0 packetsize + */ +#if 0 +int udc_ep0_packetsize (void) +{ + return EP0_PACKETSIZE; +} +#endif + +/* Switch on the UDC */ +void udc_enable (struct usb_device_instance *device) +{ + UDCDBGA ("enable device %p, status %d", device, device->status); + + /* initialize driver state variables */ + udc_devstat = 0; + + /* Save the device structure pointer */ + udc_device = device; + + /* Setup ep0 urb */ + if (!ep0_urb) { + ep0_urb = + usbd_alloc_urb (udc_device, + udc_device->bus->endpoint_array); + } else { + serial_printf ("udc_enable: ep0_urb already allocated %p\n", + ep0_urb); + } + + UDCDBG ("Check clock status"); + UDCREG (STATUS_REQ); + + /* The VBUS_MODE bit selects whether VBUS detection is done via + * software (1) or hardware (0). When software detection is + * selected, VBUS_CTRL selects whether USB is not connected (0) + * or connected (1). + */ + outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE, + FUNC_MUX_CTRL_0); + UDCREGL (FUNC_MUX_CTRL_0); + + omap1510_configure_device (device); +} + +/* Switch off the UDC */ +void udc_disable (void) +{ + UDCDBG ("disable UDC"); + + omap1510_deconfigure_device (); + + /* The VBUS_MODE bit selects whether VBUS detection is done via + * software (1) or hardware (0). When software detection is + * selected, VBUS_CTRL selects whether USB is not connected (0) + * or connected (1). + */ + outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); + outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); + UDCREGL (FUNC_MUX_CTRL_0); + + /* Free ep0 URB */ + if (ep0_urb) { + /*usbd_dealloc_urb(ep0_urb); */ + ep0_urb = NULL; + } + + /* Reset device pointer. + * We ought to do this here to balance the initialization of udc_device + * in udc_enable, but some of our other exported functions get called + * by the bus interface driver after udc_disable, so we have to hang on + * to the device pointer to avoid a null pointer dereference. */ + /* udc_device = NULL; */ +} + +/** + * udc_startup - allow udc code to do any additional startup + */ +void udc_startup_events (struct usb_device_instance *device) +{ + /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ + usbd_device_event_irq (device, DEVICE_INIT, 0); + + /* The DEVICE_CREATE event puts the USB device in the state + * STATE_ATTACHED. + */ + usbd_device_event_irq (device, DEVICE_CREATE, 0); + + /* Some USB controller driver implementations signal + * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. + * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, + * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. + * The OMAP USB client controller has the capability to detect when the + * USB cable is connected to a powered USB bus via the ATT bit in the + * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and + * DEVICE_RESET events until later. + */ + + udc_enable (device); +} + +/** + * udc_irq - do pseudo interrupts + */ +void udc_irq(void) +{ + /* Loop while we have interrupts. + * If we don't do this, the input chain + * polling delay is likely to miss + * host requests. + */ + while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { + /* Handle any new IRQs */ + omap1510_udc_irq (); + omap1510_udc_noniso_irq (); + } +} + +/* Flow control */ +void udc_set_nak(int epid) +{ + /* TODO: implement this functionality in omap1510 */ +} + +void udc_unset_nak (int epid) +{ + /* TODO: implement this functionality in omap1510 */ +} +#endif diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c deleted file mode 100644 index cfa384eff6..0000000000 --- a/drivers/usb_ohci.c +++ /dev/null @@ -1,1923 +0,0 @@ -/* - * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus. - * - * Interrupt support is added. Now, it has been tested - * on ULI1575 chip and works well with USB keyboard. - * - * (C) Copyright 2007 - * Zhang Wei, Freescale Semiconductor, Inc. - * - * (C) Copyright 2003 - * Gary Jennejohn, DENX Software Engineering - * - * Note: Much of this code has been derived from Linux 2.4 - * (C) Copyright 1999 Roman Weissgaerber - * (C) Copyright 2000-2002 David Brownell - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - based on s3c24x0's driver - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ -/* - * IMPORTANT NOTES - * 1 - Read doc/README.generic_usb_ohci - * 2 - this driver is intended for use with USB Mass Storage Devices - * (BBB) and USB keyboard. There is NO support for Isochronous pipes! - * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG - * to activate workaround for bug #41 or this driver will NOT work! - */ - -#include - -#ifdef CONFIG_USB_OHCI_NEW - -#include - -#if defined(CONFIG_PCI_OHCI) -# include -#endif - -#include -#include -#include "usb_ohci.h" - -#ifdef CONFIG_AT91RM9200 -#include /* needed for AT91_USB_HOST_BASE */ -#endif - -#if defined(CONFIG_ARM920T) || \ - defined(CONFIG_S3C2400) || \ - defined(CONFIG_S3C2410) || \ - defined(CONFIG_440EP) || \ - defined(CONFIG_PCI_OHCI) || \ - defined(CONFIG_MPC5200) -# define OHCI_USE_NPS /* force NoPowerSwitching mode */ -#endif - -#undef OHCI_VERBOSE_DEBUG /* not always helpful */ -#undef DEBUG -#undef SHOW_INFO -#undef OHCI_FILL_TRACE - -/* For initializing controller (mask in an HCFS mode too) */ -#define OHCI_CONTROL_INIT \ - (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE - -/* - * e.g. PCI controllers need this - */ -#ifdef CFG_OHCI_SWAP_REG_ACCESS -# define readl(a) __swap_32(*((vu_long *)(a))) -# define writel(a, b) (*((vu_long *)(b)) = __swap_32((vu_long)a)) -#else -# define readl(a) (*((vu_long *)(a))) -# define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a)) -#endif /* CFG_OHCI_SWAP_REG_ACCESS */ - -#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) - -#ifdef CONFIG_PCI_OHCI -static struct pci_device_id ohci_pci_ids[] = { - {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */ - {0x1033, 0x0035}, /* NEC PCI OHCI module ids */ - /* Please add supported PCI OHCI controller ids here */ - {0, 0} -}; -#endif - -#ifdef DEBUG -#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) -#else -#define dbg(format, arg...) do {} while(0) -#endif /* DEBUG */ -#define err(format, arg...) printf("ERROR: " format "\n", ## arg) -#undef SHOW_INFO -#ifdef SHOW_INFO -#define info(format, arg...) printf("INFO: " format "\n", ## arg) -#else -#define info(format, arg...) do {} while(0) -#endif - -#ifdef CFG_OHCI_BE_CONTROLLER -# define m16_swap(x) cpu_to_be16(x) -# define m32_swap(x) cpu_to_be32(x) -#else -# define m16_swap(x) cpu_to_le16(x) -# define m32_swap(x) cpu_to_le32(x) -#endif /* CFG_OHCI_BE_CONTROLLER */ - -/* global ohci_t */ -static ohci_t gohci; -/* this must be aligned to a 256 byte boundary */ -struct ohci_hcca ghcca[1]; -/* a pointer to the aligned storage */ -struct ohci_hcca *phcca; -/* this allocates EDs for all possible endpoints */ -struct ohci_device ohci_dev; -/* RHSC flag */ -int got_rhsc; -/* device which was disconnected */ -struct usb_device *devgone; - -/*-------------------------------------------------------------------------*/ - -/* AMD-756 (D2 rev) reports corrupt register contents in some cases. - * The erratum (#4) description is incorrect. AMD's workaround waits - * till some bits (mostly reserved) are clear; ok for all revs. - */ -#define OHCI_QUIRK_AMD756 0xabcd -#define read_roothub(hc, register, mask) ({ \ - u32 temp = readl (&hc->regs->roothub.register); \ - if (hc->flags & OHCI_QUIRK_AMD756) \ - while (temp & mask) \ - temp = readl (&hc->regs->roothub.register); \ - temp; }) - -static u32 roothub_a (struct ohci *hc) - { return read_roothub (hc, a, 0xfc0fe000); } -static inline u32 roothub_b (struct ohci *hc) - { return readl (&hc->regs->roothub.b); } -static inline u32 roothub_status (struct ohci *hc) - { return readl (&hc->regs->roothub.status); } -static u32 roothub_portstatus (struct ohci *hc, int i) - { return read_roothub (hc, portstatus [i], 0xffe0fce0); } - -/* forward declaration */ -static int hc_interrupt (void); -static void -td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer, - int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval); - -/*-------------------------------------------------------------------------* - * URB support functions - *-------------------------------------------------------------------------*/ - -/* free HCD-private data associated with this URB */ - -static void urb_free_priv (urb_priv_t * urb) -{ - int i; - int last; - struct td * td; - - last = urb->length - 1; - if (last >= 0) { - for (i = 0; i <= last; i++) { - td = urb->td[i]; - if (td) { - td->usb_dev = NULL; - urb->td[i] = NULL; - } - } - } - free(urb); -} - -/*-------------------------------------------------------------------------*/ - -#ifdef DEBUG -static int sohci_get_current_frame_number (struct usb_device * dev); - -/* debug| print the main components of an URB - * small: 0) header + data packets 1) just header */ - -static void pkt_print (urb_priv_t *purb, struct usb_device * dev, - unsigned long pipe, void * buffer, - int transfer_len, struct devrequest * setup, char * str, int small) -{ - dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx", - str, - sohci_get_current_frame_number (dev), - usb_pipedevice (pipe), - usb_pipeendpoint (pipe), - usb_pipeout (pipe)? 'O': 'I', - usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"): - (usb_pipecontrol (pipe)? "CTRL": "BULK"), - (purb ? purb->actual_length : 0), - transfer_len, dev->status); -#ifdef OHCI_VERBOSE_DEBUG - if (!small) { - int i, len; - - if (usb_pipecontrol (pipe)) { - printf (__FILE__ ": cmd(8):"); - for (i = 0; i < 8 ; i++) - printf (" %02x", ((__u8 *) setup) [i]); - printf ("\n"); - } - if (transfer_len > 0 && buffer) { - printf (__FILE__ ": data(%d/%d):", - (purb ? purb->actual_length : 0), - transfer_len); - len = usb_pipeout (pipe)? - transfer_len: - (purb ? purb->actual_length : 0); - for (i = 0; i < 16 && i < len; i++) - printf (" %02x", ((__u8 *) buffer) [i]); - printf ("%s\n", i < len? "...": ""); - } - } -#endif -} - -/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/ -void ep_print_int_eds (ohci_t *ohci, char * str) { - int i, j; - __u32 * ed_p; - for (i= 0; i < 32; i++) { - j = 5; - ed_p = &(ohci->hcca->int_table [i]); - if (*ed_p == 0) - continue; - printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i); - while (*ed_p != 0 && j--) { - ed_t *ed = (ed_t *)m32_swap(ed_p); - printf (" ed: %4x;", ed->hwINFO); - ed_p = &ed->hwNextED; - } - printf ("\n"); - } -} - -static void ohci_dump_intr_mask (char *label, __u32 mask) -{ - dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s", - label, - mask, - (mask & OHCI_INTR_MIE) ? " MIE" : "", - (mask & OHCI_INTR_OC) ? " OC" : "", - (mask & OHCI_INTR_RHSC) ? " RHSC" : "", - (mask & OHCI_INTR_FNO) ? " FNO" : "", - (mask & OHCI_INTR_UE) ? " UE" : "", - (mask & OHCI_INTR_RD) ? " RD" : "", - (mask & OHCI_INTR_SF) ? " SF" : "", - (mask & OHCI_INTR_WDH) ? " WDH" : "", - (mask & OHCI_INTR_SO) ? " SO" : "" - ); -} - -static void maybe_print_eds (char *label, __u32 value) -{ - ed_t *edp = (ed_t *)value; - - if (value) { - dbg ("%s %08x", label, value); - dbg ("%08x", edp->hwINFO); - dbg ("%08x", edp->hwTailP); - dbg ("%08x", edp->hwHeadP); - dbg ("%08x", edp->hwNextED); - } -} - -static char * hcfs2string (int state) -{ - switch (state) { - case OHCI_USB_RESET: return "reset"; - case OHCI_USB_RESUME: return "resume"; - case OHCI_USB_OPER: return "operational"; - case OHCI_USB_SUSPEND: return "suspend"; - } - return "?"; -} - -/* dump control and status registers */ -static void ohci_dump_status (ohci_t *controller) -{ - struct ohci_regs *regs = controller->regs; - __u32 temp; - - temp = readl (®s->revision) & 0xff; - if (temp != 0x10) - dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f)); - - temp = readl (®s->control); - dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, - (temp & OHCI_CTRL_RWE) ? " RWE" : "", - (temp & OHCI_CTRL_RWC) ? " RWC" : "", - (temp & OHCI_CTRL_IR) ? " IR" : "", - hcfs2string (temp & OHCI_CTRL_HCFS), - (temp & OHCI_CTRL_BLE) ? " BLE" : "", - (temp & OHCI_CTRL_CLE) ? " CLE" : "", - (temp & OHCI_CTRL_IE) ? " IE" : "", - (temp & OHCI_CTRL_PLE) ? " PLE" : "", - temp & OHCI_CTRL_CBSR - ); - - temp = readl (®s->cmdstatus); - dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, - (temp & OHCI_SOC) >> 16, - (temp & OHCI_OCR) ? " OCR" : "", - (temp & OHCI_BLF) ? " BLF" : "", - (temp & OHCI_CLF) ? " CLF" : "", - (temp & OHCI_HCR) ? " HCR" : "" - ); - - ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus)); - ohci_dump_intr_mask ("intrenable", readl (®s->intrenable)); - - maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent)); - - maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead)); - maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent)); - - maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead)); - maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent)); - - maybe_print_eds ("donehead", readl (®s->donehead)); -} - -static void ohci_dump_roothub (ohci_t *controller, int verbose) -{ - __u32 temp, ndp, i; - - temp = roothub_a (controller); - ndp = (temp & RH_A_NDP); -#ifdef CONFIG_AT91C_PQFP_UHPBUG - ndp = (ndp == 2) ? 1:0; -#endif - if (verbose) { - dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, - ((temp & RH_A_POTPGT) >> 24) & 0xff, - (temp & RH_A_NOCP) ? " NOCP" : "", - (temp & RH_A_OCPM) ? " OCPM" : "", - (temp & RH_A_DT) ? " DT" : "", - (temp & RH_A_NPS) ? " NPS" : "", - (temp & RH_A_PSM) ? " PSM" : "", - ndp - ); - temp = roothub_b (controller); - dbg ("roothub.b: %08x PPCM=%04x DR=%04x", - temp, - (temp & RH_B_PPCM) >> 16, - (temp & RH_B_DR) - ); - temp = roothub_status (controller); - dbg ("roothub.status: %08x%s%s%s%s%s%s", - temp, - (temp & RH_HS_CRWE) ? " CRWE" : "", - (temp & RH_HS_OCIC) ? " OCIC" : "", - (temp & RH_HS_LPSC) ? " LPSC" : "", - (temp & RH_HS_DRWE) ? " DRWE" : "", - (temp & RH_HS_OCI) ? " OCI" : "", - (temp & RH_HS_LPS) ? " LPS" : "" - ); - } - - for (i = 0; i < ndp; i++) { - temp = roothub_portstatus (controller, i); - dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", - i, - temp, - (temp & RH_PS_PRSC) ? " PRSC" : "", - (temp & RH_PS_OCIC) ? " OCIC" : "", - (temp & RH_PS_PSSC) ? " PSSC" : "", - (temp & RH_PS_PESC) ? " PESC" : "", - (temp & RH_PS_CSC) ? " CSC" : "", - - (temp & RH_PS_LSDA) ? " LSDA" : "", - (temp & RH_PS_PPS) ? " PPS" : "", - (temp & RH_PS_PRS) ? " PRS" : "", - (temp & RH_PS_POCI) ? " POCI" : "", - (temp & RH_PS_PSS) ? " PSS" : "", - - (temp & RH_PS_PES) ? " PES" : "", - (temp & RH_PS_CCS) ? " CCS" : "" - ); - } -} - -static void ohci_dump (ohci_t *controller, int verbose) -{ - dbg ("OHCI controller usb-%s state", controller->slot_name); - - /* dumps some of the state we know about */ - ohci_dump_status (controller); - if (verbose) - ep_print_int_eds (controller, "hcca"); - dbg ("hcca frame #%04x", controller->hcca->frame_no); - ohci_dump_roothub (controller, 1); - -#endif /* DEBUG */ - -/*-------------------------------------------------------------------------* - * Interface functions (URB) - *-------------------------------------------------------------------------*/ - -/* get a transfer request */ - -int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup) -{ - ohci_t *ohci; - ed_t * ed; - urb_priv_t *purb_priv = urb; - int i, size = 0; - struct usb_device *dev = urb->dev; - unsigned long pipe = urb->pipe; - void *buffer = urb->transfer_buffer; - int transfer_len = urb->transfer_buffer_length; - int interval = urb->interval; - - ohci = &gohci; - - /* when controller's hung, permit only roothub cleanup attempts - * such as powering down ports */ - if (ohci->disabled) { - err("sohci_submit_job: EPIPE"); - return -1; - } - - /* we're about to begin a new transaction here so mark the URB unfinished */ - urb->finished = 0; - - /* every endpoint has a ed, locate and fill it */ - if (!(ed = ep_add_ed (dev, pipe, interval, 1))) { - err("sohci_submit_job: ENOMEM"); - return -1; - } - - /* for the private part of the URB we need the number of TDs (size) */ - switch (usb_pipetype (pipe)) { - case PIPE_BULK: /* one TD for every 4096 Byte */ - size = (transfer_len - 1) / 4096 + 1; - break; - case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ - size = (transfer_len == 0)? 2: - (transfer_len - 1) / 4096 + 3; - break; - case PIPE_INTERRUPT: /* 1 TD */ - size = 1; - break; - } - - ed->purb = urb; - - if (size >= (N_URB_TD - 1)) { - err("need %d TDs, only have %d", size, N_URB_TD); - return -1; - } - purb_priv->pipe = pipe; - - /* fill the private part of the URB */ - purb_priv->length = size; - purb_priv->ed = ed; - purb_priv->actual_length = 0; - - /* allocate the TDs */ - /* note that td[0] was allocated in ep_add_ed */ - for (i = 0; i < size; i++) { - purb_priv->td[i] = td_alloc (dev); - if (!purb_priv->td[i]) { - purb_priv->length = i; - urb_free_priv (purb_priv); - err("sohci_submit_job: ENOMEM"); - return -1; - } - } - - if (ed->state == ED_NEW || (ed->state & ED_DEL)) { - urb_free_priv (purb_priv); - err("sohci_submit_job: EINVAL"); - return -1; - } - - /* link the ed into a chain if is not already */ - if (ed->state != ED_OPER) - ep_link (ohci, ed); - - /* fill the TDs and link it to the ed */ - td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval); - - return 0; -} - -static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb) -{ - struct ohci_regs *regs = hc->regs; - - switch (usb_pipetype (urb->pipe)) { - case PIPE_INTERRUPT: - /* implicitly requeued */ - if (urb->dev->irq_handle && - (urb->dev->irq_act_len = urb->actual_length)) { - writel (OHCI_INTR_WDH, ®s->intrenable); - readl (®s->intrenable); /* PCI posting flush */ - urb->dev->irq_handle(urb->dev); - writel (OHCI_INTR_WDH, ®s->intrdisable); - readl (®s->intrdisable); /* PCI posting flush */ - } - urb->actual_length = 0; - td_submit_job ( - urb->dev, - urb->pipe, - urb->transfer_buffer, - urb->transfer_buffer_length, - NULL, - urb, - urb->interval); - break; - case PIPE_CONTROL: - case PIPE_BULK: - break; - default: - return 0; - } - return 1; -} - -/*-------------------------------------------------------------------------*/ - -#ifdef DEBUG -/* tell us the current USB frame number */ - -static int sohci_get_current_frame_number (struct usb_device *usb_dev) -{ - ohci_t *ohci = &gohci; - - return m16_swap (ohci->hcca->frame_no); -} -#endif - -/*-------------------------------------------------------------------------* - * ED handling functions - *-------------------------------------------------------------------------*/ - -/* search for the right branch to insert an interrupt ed into the int tree - * do some load ballancing; - * returns the branch and - * sets the interval to interval = 2^integer (ld (interval)) */ - -static int ep_int_ballance (ohci_t * ohci, int interval, int load) -{ - int i, branch = 0; - - /* search for the least loaded interrupt endpoint - * branch of all 32 branches - */ - for (i = 0; i < 32; i++) - if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i]) - branch = i; - - branch = branch % interval; - for (i = branch; i < 32; i += interval) - ohci->ohci_int_load [i] += load; - - return branch; -} - -/*-------------------------------------------------------------------------*/ - -/* 2^int( ld (inter)) */ - -static int ep_2_n_interval (int inter) -{ - int i; - for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++); - return 1 << i; -} - -/*-------------------------------------------------------------------------*/ - -/* the int tree is a binary tree - * in order to process it sequentially the indexes of the branches have to be mapped - * the mapping reverses the bits of a word of num_bits length */ - -static int ep_rev (int num_bits, int word) -{ - int i, wout = 0; - - for (i = 0; i < num_bits; i++) - wout |= (((word >> i) & 1) << (num_bits - i - 1)); - return wout; -} - -/*-------------------------------------------------------------------------* - * ED handling functions - *-------------------------------------------------------------------------*/ - -/* link an ed into one of the HC chains */ - -static int ep_link (ohci_t *ohci, ed_t *edi) -{ - volatile ed_t *ed = edi; - int int_branch; - int i; - int inter; - int interval; - int load; - __u32 * ed_p; - - ed->state = ED_OPER; - ed->int_interval = 0; - - switch (ed->type) { - case PIPE_CONTROL: - ed->hwNextED = 0; - if (ohci->ed_controltail == NULL) { - writel (ed, &ohci->regs->ed_controlhead); - } else { - ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed); - } - ed->ed_prev = ohci->ed_controltail; - if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && - !ohci->ed_rm_list[1] && !ohci->sleeping) { - ohci->hc_control |= OHCI_CTRL_CLE; - writel (ohci->hc_control, &ohci->regs->control); - } - ohci->ed_controltail = edi; - break; - - case PIPE_BULK: - ed->hwNextED = 0; - if (ohci->ed_bulktail == NULL) { - writel (ed, &ohci->regs->ed_bulkhead); - } else { - ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed); - } - ed->ed_prev = ohci->ed_bulktail; - if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && - !ohci->ed_rm_list[1] && !ohci->sleeping) { - ohci->hc_control |= OHCI_CTRL_BLE; - writel (ohci->hc_control, &ohci->regs->control); - } - ohci->ed_bulktail = edi; - break; - - case PIPE_INTERRUPT: - load = ed->int_load; - interval = ep_2_n_interval (ed->int_period); - ed->int_interval = interval; - int_branch = ep_int_ballance (ohci, interval, load); - ed->int_branch = int_branch; - - for (i = 0; i < ep_rev (6, interval); i += inter) { - inter = 1; - for (ed_p = &(ohci->hcca->int_table[ep_rev (5, i) + int_branch]); - (*ed_p != 0) && (((ed_t *)ed_p)->int_interval >= interval); - ed_p = &(((ed_t *)ed_p)->hwNextED)) - inter = ep_rev (6, ((ed_t *)ed_p)->int_interval); - ed->hwNextED = *ed_p; - *ed_p = m32_swap((unsigned long)ed); - } - break; - } - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* scan the periodic table to find and unlink this ED */ -static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed, - unsigned index, unsigned period) -{ - for (; index < NUM_INTS; index += period) { - __u32 *ed_p = &ohci->hcca->int_table [index]; - - /* ED might have been unlinked through another path */ - while (*ed_p != 0) { - if (((struct ed *)m32_swap ((unsigned long)ed_p)) == ed) { - *ed_p = ed->hwNextED; - break; - } - ed_p = & (((struct ed *)m32_swap ((unsigned long)ed_p))->hwNextED); - } - } -} - -/* unlink an ed from one of the HC chains. - * just the link to the ed is unlinked. - * the link from the ed still points to another operational ed or 0 - * so the HC can eventually finish the processing of the unlinked ed */ - -static int ep_unlink (ohci_t *ohci, ed_t *edi) -{ - volatile ed_t *ed = edi; - int i; - - ed->hwINFO |= m32_swap (OHCI_ED_SKIP); - - switch (ed->type) { - case PIPE_CONTROL: - if (ed->ed_prev == NULL) { - if (!ed->hwNextED) { - ohci->hc_control &= ~OHCI_CTRL_CLE; - writel (ohci->hc_control, &ohci->regs->control); - } - writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead); - } else { - ed->ed_prev->hwNextED = ed->hwNextED; - } - if (ohci->ed_controltail == ed) { - ohci->ed_controltail = ed->ed_prev; - } else { - ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; - } - break; - - case PIPE_BULK: - if (ed->ed_prev == NULL) { - if (!ed->hwNextED) { - ohci->hc_control &= ~OHCI_CTRL_BLE; - writel (ohci->hc_control, &ohci->regs->control); - } - writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead); - } else { - ed->ed_prev->hwNextED = ed->hwNextED; - } - if (ohci->ed_bulktail == ed) { - ohci->ed_bulktail = ed->ed_prev; - } else { - ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; - } - break; - - case PIPE_INTERRUPT: - periodic_unlink (ohci, ed, 0, 1); - for (i = ed->int_branch; i < 32; i += ed->int_interval) - ohci->ohci_int_load[i] -= ed->int_load; - break; - } - ed->state = ED_UNLINK; - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* add/reinit an endpoint; this should be done once at the - * usb_set_configuration command, but the USB stack is a little bit - * stateless so we do it at every transaction if the state of the ed - * is ED_NEW then a dummy td is added and the state is changed to - * ED_UNLINK in all other cases the state is left unchanged the ed - * info fields are setted anyway even though most of them should not - * change - */ -static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe, - int interval, int load) -{ - td_t *td; - ed_t *ed_ret; - volatile ed_t *ed; - - ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) | - (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))]; - - if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { - err("ep_add_ed: pending delete"); - /* pending delete request */ - return NULL; - } - - if (ed->state == ED_NEW) { - ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */ - /* dummy td; end of td list for ed */ - td = td_alloc (usb_dev); - ed->hwTailP = m32_swap ((unsigned long)td); - ed->hwHeadP = ed->hwTailP; - ed->state = ED_UNLINK; - ed->type = usb_pipetype (pipe); - ohci_dev.ed_cnt++; - } - - ed->hwINFO = m32_swap (usb_pipedevice (pipe) - | usb_pipeendpoint (pipe) << 7 - | (usb_pipeisoc (pipe)? 0x8000: 0) - | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000)) - | usb_pipeslow (pipe) << 13 - | usb_maxpacket (usb_dev, pipe) << 16); - - if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) { - ed->int_period = interval; - ed->int_load = load; - } - - return ed_ret; -} - -/*-------------------------------------------------------------------------* - * TD handling functions - *-------------------------------------------------------------------------*/ - -/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ - -static void td_fill (ohci_t *ohci, unsigned int info, - void *data, int len, - struct usb_device *dev, int index, urb_priv_t *urb_priv) -{ - volatile td_t *td, *td_pt; -#ifdef OHCI_FILL_TRACE - int i; -#endif - - if (index > urb_priv->length) { - err("index > length"); - return; - } - /* use this td as the next dummy */ - td_pt = urb_priv->td [index]; - td_pt->hwNextTD = 0; - - /* fill the old dummy TD */ - td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf); - - td->ed = urb_priv->ed; - td->next_dl_td = NULL; - td->index = index; - td->data = (__u32)data; -#ifdef OHCI_FILL_TRACE - if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) { - for (i = 0; i < len; i++) - printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]); - printf("\n"); - } -#endif - if (!len) - data = 0; - - td->hwINFO = m32_swap (info); - td->hwCBP = m32_swap ((unsigned long)data); - if (data) - td->hwBE = m32_swap ((unsigned long)(data + len - 1)); - else - td->hwBE = 0; - td->hwNextTD = m32_swap ((unsigned long)td_pt); - - /* append to queue */ - td->ed->hwTailP = td->hwNextTD; -} - -/*-------------------------------------------------------------------------*/ - -/* prepare all TDs of a transfer */ - -static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval) -{ - ohci_t *ohci = &gohci; - int data_len = transfer_len; - void *data; - int cnt = 0; - __u32 info = 0; - unsigned int toggle = 0; - - /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */ - if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { - toggle = TD_T_TOGGLE; - } else { - toggle = TD_T_DATA0; - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1); - } - urb->td_cnt = 0; - if (data_len) - data = buffer; - else - data = 0; - - switch (usb_pipetype (pipe)) { - case PIPE_BULK: - info = usb_pipeout (pipe)? - TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; - while(data_len > 4096) { - td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb); - data += 4096; data_len -= 4096; cnt++; - } - info = usb_pipeout (pipe)? - TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; - td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb); - cnt++; - - if (!ohci->sleeping) - writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */ - break; - - case PIPE_CONTROL: - info = TD_CC | TD_DP_SETUP | TD_T_DATA0; - td_fill (ohci, info, setup, 8, dev, cnt++, urb); - if (data_len > 0) { - info = usb_pipeout (pipe)? - TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; - /* NOTE: mishandles transfers >8K, some >4K */ - td_fill (ohci, info, data, data_len, dev, cnt++, urb); - } - info = usb_pipeout (pipe)? - TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1; - td_fill (ohci, info, data, 0, dev, cnt++, urb); - if (!ohci->sleeping) - writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */ - break; - - case PIPE_INTERRUPT: - info = usb_pipeout (urb->pipe)? - TD_CC | TD_DP_OUT | toggle: - TD_CC | TD_R | TD_DP_IN | toggle; - td_fill (ohci, info, data, data_len, dev, cnt++, urb); - break; - } - if (urb->length != cnt) - dbg("TD LENGTH %d != CNT %d", urb->length, cnt); -} - -/*-------------------------------------------------------------------------* - * Done List handling functions - *-------------------------------------------------------------------------*/ - -/* calculate the transfer length and update the urb */ - -static void dl_transfer_length(td_t * td) -{ - __u32 tdINFO, tdBE, tdCBP; - urb_priv_t *lurb_priv = td->ed->purb; - - tdINFO = m32_swap (td->hwINFO); - tdBE = m32_swap (td->hwBE); - tdCBP = m32_swap (td->hwCBP); - - if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL && - ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { - if (tdBE != 0) { - if (td->hwCBP == 0) - lurb_priv->actual_length += tdBE - td->data + 1; - else - lurb_priv->actual_length += tdCBP - td->data; - } - } -} - -/*-------------------------------------------------------------------------*/ - -/* replies to the request have to be on a FIFO basis so - * we reverse the reversed done-list */ - -static td_t * dl_reverse_done_list (ohci_t *ohci) -{ - __u32 td_list_hc; - td_t *td_rev = NULL; - td_t *td_list = NULL; - urb_priv_t *lurb_priv = NULL; - - td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0; - ohci->hcca->done_head = 0; - - while (td_list_hc) { - td_list = (td_t *)td_list_hc; - - if (TD_CC_GET (m32_swap (td_list->hwINFO))) { - lurb_priv = td_list->ed->purb; - dbg(" USB-error/status: %x : %p", - TD_CC_GET (m32_swap (td_list->hwINFO)), td_list); - if (td_list->ed->hwHeadP & m32_swap (0x1)) { - if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) { - td_list->ed->hwHeadP = - (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) | - (td_list->ed->hwHeadP & m32_swap (0x2)); - lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1; - } else - td_list->ed->hwHeadP &= m32_swap (0xfffffff2); - } -#ifdef CONFIG_MPC5200 - td_list->hwNextTD = 0; -#endif - } - - td_list->next_dl_td = td_rev; - td_rev = td_list; - td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0; - } - return td_list; -} - -/*-------------------------------------------------------------------------*/ - -/* td done list */ -static int dl_done_list (ohci_t *ohci, td_t *td_list) -{ - td_t *td_list_next = NULL; - ed_t *ed; - int cc = 0; - int stat = 0; - /* urb_t *urb; */ - urb_priv_t *lurb_priv; - __u32 tdINFO, edHeadP, edTailP; - - while (td_list) { - td_list_next = td_list->next_dl_td; - - tdINFO = m32_swap (td_list->hwINFO); - - ed = td_list->ed; - lurb_priv = ed->purb; - - dl_transfer_length(td_list); - - /* error code of transfer */ - cc = TD_CC_GET (tdINFO); - if (cc != 0) { - dbg("ConditionCode %#x", cc); - stat = cc_to_error[cc]; - } - - /* see if this done list makes for all TD's of current URB, - * and mark the URB finished if so */ - if (++(lurb_priv->td_cnt) == lurb_priv->length) { -#if 1 - if ((ed->state & (ED_OPER | ED_UNLINK)) && - (lurb_priv->state != URB_DEL)) -#else - if ((ed->state & (ED_OPER | ED_UNLINK))) -#endif - lurb_priv->finished = sohci_return_job(ohci, - lurb_priv); - else - dbg("dl_done_list: strange.., ED state %x, ed->state\n"); - } else - dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt, - lurb_priv->length); - if (ed->state != ED_NEW && - (usb_pipetype (lurb_priv->pipe) != PIPE_INTERRUPT)) { - edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0; - edTailP = m32_swap (ed->hwTailP); - - /* unlink eds if they are not busy */ - if ((edHeadP == edTailP) && (ed->state == ED_OPER)) - ep_unlink (ohci, ed); - } - - td_list = td_list_next; - } - return stat; -} - -/*-------------------------------------------------------------------------* - * Virtual Root Hub - *-------------------------------------------------------------------------*/ - -/* Device descriptor */ -static __u8 root_hub_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x10, /* __u16 bcdUSB; v1.1 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x01, /* __u8 iProduct; */ - 0x00, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 root_hub_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -static unsigned char root_hub_str_index0[] = -{ - 0x04, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 0x09, /* __u8 lang ID */ - 0x04, /* __u8 lang ID */ -}; - -static unsigned char root_hub_str_index1[] = -{ - 28, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 'O', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'C', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'I', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'R', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 't', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'u', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'b', /* __u8 Unicode */ - 0, /* __u8 Unicode */ -}; - -/* Hub class-specific descriptor is constructed dynamically */ - -/*-------------------------------------------------------------------------*/ - -#define OK(x) len = (x); break -#ifdef DEBUG -#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);} -#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);} -#else -#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status) -#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1]) -#endif -#define RD_RH_STAT roothub_status(&gohci) -#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1) - -/* request to virtual root hub */ - -int rh_check_port_status(ohci_t *controller) -{ - __u32 temp, ndp, i; - int res; - - res = -1; - temp = roothub_a (controller); - ndp = (temp & RH_A_NDP); -#ifdef CONFIG_AT91C_PQFP_UHPBUG - ndp = (ndp == 2) ? 1:0; -#endif - for (i = 0; i < ndp; i++) { - temp = roothub_portstatus (controller, i); - /* check for a device disconnect */ - if (((temp & (RH_PS_PESC | RH_PS_CSC)) == - (RH_PS_PESC | RH_PS_CSC)) && - ((temp & RH_PS_CCS) == 0)) { - res = i; - break; - } - } - return res; -} - -static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int transfer_len, struct devrequest *cmd) -{ - void * data = buffer; - int leni = transfer_len; - int len = 0; - int stat = 0; - __u32 datab[4]; - __u8 *data_buf = (__u8 *)datab; - __u16 bmRType_bReq; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - -#ifdef DEBUG -pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); -#else - wait_ms(1); -#endif - if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { - info("Root-Hub submit IRQ: NOT implemented"); - return 0; - } - - bmRType_bReq = cmd->requesttype | (cmd->request << 8); - wValue = cpu_to_le16 (cmd->value); - wIndex = cpu_to_le16 (cmd->index); - wLength = cpu_to_le16 (cmd->length); - - info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", - dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); - - switch (bmRType_bReq) { - /* Request Destination: - without flags: Device, - RH_INTERFACE: interface, - RH_ENDPOINT: endpoint, - RH_CLASS means HUB here, - RH_OTHER | RH_CLASS almost ever means HUB_PORT here - */ - - case RH_GET_STATUS: - *(__u16 *) data_buf = cpu_to_le16 (1); OK (2); - case RH_GET_STATUS | RH_INTERFACE: - *(__u16 *) data_buf = cpu_to_le16 (0); OK (2); - case RH_GET_STATUS | RH_ENDPOINT: - *(__u16 *) data_buf = cpu_to_le16 (0); OK (2); - case RH_GET_STATUS | RH_CLASS: - *(__u32 *) data_buf = cpu_to_le32 ( - RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); - OK (4); - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - *(__u32 *) data_buf = cpu_to_le32 (RD_RH_PORTSTAT); OK (4); - - case RH_CLEAR_FEATURE | RH_ENDPOINT: - switch (wValue) { - case (RH_ENDPOINT_STALL): OK (0); - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - switch (wValue) { - case RH_C_HUB_LOCAL_POWER: - OK(0); - case (RH_C_HUB_OVER_CURRENT): - WR_RH_STAT(RH_HS_OCIC); OK (0); - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_ENABLE): - WR_RH_PORTSTAT (RH_PS_CCS ); OK (0); - case (RH_PORT_SUSPEND): - WR_RH_PORTSTAT (RH_PS_POCI); OK (0); - case (RH_PORT_POWER): - WR_RH_PORTSTAT (RH_PS_LSDA); OK (0); - case (RH_C_PORT_CONNECTION): - WR_RH_PORTSTAT (RH_PS_CSC ); OK (0); - case (RH_C_PORT_ENABLE): - WR_RH_PORTSTAT (RH_PS_PESC); OK (0); - case (RH_C_PORT_SUSPEND): - WR_RH_PORTSTAT (RH_PS_PSSC); OK (0); - case (RH_C_PORT_OVER_CURRENT): - WR_RH_PORTSTAT (RH_PS_OCIC); OK (0); - case (RH_C_PORT_RESET): - WR_RH_PORTSTAT (RH_PS_PRSC); OK (0); - } - break; - - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_SUSPEND): - WR_RH_PORTSTAT (RH_PS_PSS ); OK (0); - case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ - if (RD_RH_PORTSTAT & RH_PS_CCS) - WR_RH_PORTSTAT (RH_PS_PRS); - OK (0); - case (RH_PORT_POWER): - WR_RH_PORTSTAT (RH_PS_PPS ); - wait_ms(100); - OK (0); - case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ - if (RD_RH_PORTSTAT & RH_PS_CCS) - WR_RH_PORTSTAT (RH_PS_PES ); - OK (0); - } - break; - - case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case (0x01): /* device descriptor */ - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_dev_des), - wLength)); - data_buf = root_hub_dev_des; OK(len); - case (0x02): /* configuration descriptor */ - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_config_des), - wLength)); - data_buf = root_hub_config_des; OK(len); - case (0x03): /* string descriptors */ - if(wValue==0x0300) { - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_str_index0), - wLength)); - data_buf = root_hub_str_index0; - OK(len); - } - if(wValue==0x0301) { - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_str_index1), - wLength)); - data_buf = root_hub_str_index1; - OK(len); - } - default: - stat = USB_ST_STALLED; - } - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - { - __u32 temp = roothub_a (&gohci); - - data_buf [0] = 9; /* min length; */ - data_buf [1] = 0x29; - data_buf [2] = temp & RH_A_NDP; -#ifdef CONFIG_AT91C_PQFP_UHPBUG - data_buf [2] = (data_buf [2] == 2) ? 1:0; -#endif - data_buf [3] = 0; - if (temp & RH_A_PSM) /* per-port power switching? */ - data_buf [3] |= 0x1; - if (temp & RH_A_NOCP) /* no overcurrent reporting? */ - data_buf [3] |= 0x10; - else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */ - data_buf [3] |= 0x8; - - /* corresponds to data_buf[4-7] */ - datab [1] = 0; - data_buf [5] = (temp & RH_A_POTPGT) >> 24; - temp = roothub_b (&gohci); - data_buf [7] = temp & RH_B_DR; - if (data_buf [2] < 7) { - data_buf [8] = 0xff; - } else { - data_buf [0] += 2; - data_buf [8] = (temp & RH_B_DR) >> 8; - data_buf [10] = data_buf [9] = 0xff; - } - - len = min_t(unsigned int, leni, - min_t(unsigned int, data_buf [0], wLength)); - OK (len); - } - - case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1); - - case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0); - - default: - dbg ("unsupported root hub command"); - stat = USB_ST_STALLED; - } - -#ifdef DEBUG - ohci_dump_roothub (&gohci, 1); -#else - wait_ms(1); -#endif - - len = min_t(int, len, leni); - if (data != data_buf) - memcpy (data, data_buf, len); - dev->act_len = len; - dev->status = stat; - -#ifdef DEBUG - pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); -#else - wait_ms(1); -#endif - - return stat; -} - -/*-------------------------------------------------------------------------*/ - -/* common code for handling submit messages - used for all but root hub */ -/* accesses. */ -int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup, int interval) -{ - int stat = 0; - int maxsize = usb_maxpacket(dev, pipe); - int timeout; - urb_priv_t *urb; - - urb = malloc(sizeof(urb_priv_t)); - memset(urb, 0, sizeof(urb_priv_t)); - - urb->dev = dev; - urb->pipe = pipe; - urb->transfer_buffer = buffer; - urb->transfer_buffer_length = transfer_len; - urb->interval = interval; - - /* device pulled? Shortcut the action. */ - if (devgone == dev) { - dev->status = USB_ST_CRC_ERR; - return 0; - } - -#ifdef DEBUG - urb->actual_length = 0; - pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); -#else - wait_ms(1); -#endif - if (!maxsize) { - err("submit_common_message: pipesize for pipe %lx is zero", - pipe); - return -1; - } - - if (sohci_submit_job(urb, setup) < 0) { - err("sohci_submit_job failed"); - return -1; - } - -#if 0 - wait_ms(10); - /* ohci_dump_status(&gohci); */ -#endif - - /* allow more time for a BULK device to react - some are slow */ -#define BULK_TO 5000 /* timeout in milliseconds */ - if (usb_pipetype (pipe) == PIPE_BULK) - timeout = BULK_TO; - else - timeout = 100; - - /* wait for it to complete */ - for (;;) { - /* check whether the controller is done */ - stat = hc_interrupt(); - if (stat < 0) { - stat = USB_ST_CRC_ERR; - break; - } - - /* NOTE: since we are not interrupt driven in U-Boot and always - * handle only one URB at a time, we cannot assume the - * transaction finished on the first successful return from - * hc_interrupt().. unless the flag for current URB is set, - * meaning that all TD's to/from device got actually - * transferred and processed. If the current URB is not - * finished we need to re-iterate this loop so as - * hc_interrupt() gets called again as there needs to be some - * more TD's to process still */ - if ((stat >= 0) && (stat != 0xff) && (urb->finished)) { - /* 0xff is returned for an SF-interrupt */ - break; - } - - if (--timeout) { - wait_ms(1); - if (!urb->finished) - dbg("\%"); - - } else { - err("CTL:TIMEOUT "); - dbg("submit_common_msg: TO status %x\n", stat); - urb->finished = 1; - stat = USB_ST_CRC_ERR; - break; - } - } - - dev->status = stat; - dev->act_len = transfer_len; - -#ifdef DEBUG - pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe)); -#else - wait_ms(1); -#endif - - /* free TDs in urb_priv */ - if (usb_pipetype (pipe) != PIPE_INTERRUPT) - urb_free_priv (urb); - return 0; -} - -/* submit routines called from usb.c */ -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len) -{ - info("submit_bulk_msg"); - return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0); -} - -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup) -{ - int maxsize = usb_maxpacket(dev, pipe); - - info("submit_control_msg"); -#ifdef DEBUG - pkt_print(NULL, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); -#else - wait_ms(1); -#endif - if (!maxsize) { - err("submit_control_message: pipesize for pipe %lx is zero", - pipe); - return -1; - } - if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) { - gohci.rh.dev = dev; - /* root hub - redirect */ - return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len, - setup); - } - - return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0); -} - -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, int interval) -{ - info("submit_int_msg"); - return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, - interval); -} - -/*-------------------------------------------------------------------------* - * HC functions - *-------------------------------------------------------------------------*/ - -/* reset the HC and BUS */ - -static int hc_reset (ohci_t *ohci) -{ - int timeout = 30; - int smm_timeout = 50; /* 0,5 sec */ - - dbg("%s\n", __FUNCTION__); - - if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */ - writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */ - info("USB HC TakeOver from SMM"); - while (readl (&ohci->regs->control) & OHCI_CTRL_IR) { - wait_ms (10); - if (--smm_timeout == 0) { - err("USB HC TakeOver failed!"); - return -1; - } - } - } - - /* Disable HC interrupts */ - writel (OHCI_INTR_MIE, &ohci->regs->intrdisable); - - dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n", - ohci->slot_name, - readl(&ohci->regs->control)); - - /* Reset USB (needed by some controllers) */ - ohci->hc_control = 0; - writel (ohci->hc_control, &ohci->regs->control); - - /* HC Reset requires max 10 us delay */ - writel (OHCI_HCR, &ohci->regs->cmdstatus); - while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { - if (--timeout == 0) { - err("USB HC reset timed out!"); - return -1; - } - udelay (1); - } - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* Start an OHCI controller, set the BUS operational - * enable interrupts - * connect the virtual root hub */ - -static int hc_start (ohci_t * ohci) -{ - __u32 mask; - unsigned int fminterval; - - ohci->disabled = 1; - - /* Tell the controller where the control and bulk lists are - * The lists are empty now. */ - - writel (0, &ohci->regs->ed_controlhead); - writel (0, &ohci->regs->ed_bulkhead); - - writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */ - - fminterval = 0x2edf; - writel ((fminterval * 9) / 10, &ohci->regs->periodicstart); - fminterval |= ((((fminterval - 210) * 6) / 7) << 16); - writel (fminterval, &ohci->regs->fminterval); - writel (0x628, &ohci->regs->lsthresh); - - /* start controller operations */ - ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; - ohci->disabled = 0; - writel (ohci->hc_control, &ohci->regs->control); - - /* disable all interrupts */ - mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | - OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | - OHCI_INTR_OC | OHCI_INTR_MIE); - writel (mask, &ohci->regs->intrdisable); - /* clear all interrupts */ - mask &= ~OHCI_INTR_MIE; - writel (mask, &ohci->regs->intrstatus); - /* Choose the interrupts we care about now - but w/o MIE */ - mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; - writel (mask, &ohci->regs->intrenable); - -#ifdef OHCI_USE_NPS - /* required for AMD-756 and some Mac platforms */ - writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM, - &ohci->regs->roothub.a); - writel (RH_HS_LPSC, &ohci->regs->roothub.status); -#endif /* OHCI_USE_NPS */ - -#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) - /* POTPGT delay is bits 24-31, in 2 ms units. */ - mdelay ((roothub_a (ohci) >> 23) & 0x1fe); - - /* connect the virtual root hub */ - ohci->rh.devnum = 0; - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* Poll USB interrupt. */ -void usb_event_poll(void) -{ - hc_interrupt(); -} - -/* an interrupt happens */ - -static int hc_interrupt (void) -{ - ohci_t *ohci = &gohci; - struct ohci_regs *regs = ohci->regs; - int ints; - int stat = -1; - - if ((ohci->hcca->done_head != 0) && - !(m32_swap (ohci->hcca->done_head) & 0x01)) { - ints = OHCI_INTR_WDH; - } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) { - ohci->disabled++; - err ("%s device removed!", ohci->slot_name); - return -1; - } else if ((ints &= readl (®s->intrenable)) == 0) { - dbg("hc_interrupt: returning..\n"); - return 0xff; - } - - /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */ - - if (ints & OHCI_INTR_RHSC) { - got_rhsc = 1; - stat = 0xff; - } - - if (ints & OHCI_INTR_UE) { - ohci->disabled++; - err ("OHCI Unrecoverable Error, controller usb-%s disabled", - ohci->slot_name); - /* e.g. due to PCI Master/Target Abort */ - -#ifdef DEBUG - ohci_dump (ohci, 1); -#else - wait_ms(1); -#endif - /* FIXME: be optimistic, hope that bug won't repeat often. */ - /* Make some non-interrupt context restart the controller. */ - /* Count and limit the retries though; either hardware or */ - /* software errors can go forever... */ - hc_reset (ohci); - return -1; - } - - if (ints & OHCI_INTR_WDH) { - wait_ms(1); - writel (OHCI_INTR_WDH, ®s->intrdisable); - (void)readl (®s->intrdisable); /* flush */ - stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci)); - writel (OHCI_INTR_WDH, ®s->intrenable); - (void)readl (®s->intrdisable); /* flush */ - } - - if (ints & OHCI_INTR_SO) { - dbg("USB Schedule overrun\n"); - writel (OHCI_INTR_SO, ®s->intrenable); - stat = -1; - } - - /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ - if (ints & OHCI_INTR_SF) { - unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1; - wait_ms(1); - writel (OHCI_INTR_SF, ®s->intrdisable); - if (ohci->ed_rm_list[frame] != NULL) - writel (OHCI_INTR_SF, ®s->intrenable); - stat = 0xff; - } - - writel (ints, ®s->intrstatus); - return stat; -} - -/*-------------------------------------------------------------------------*/ - -/*-------------------------------------------------------------------------*/ - -/* De-allocate all resources.. */ - -static void hc_release_ohci (ohci_t *ohci) -{ - dbg ("USB HC release ohci usb-%s", ohci->slot_name); - - if (!ohci->disabled) - hc_reset (ohci); -} - -/*-------------------------------------------------------------------------*/ - -/* - * low level initalisation routine, called from usb.c - */ -static char ohci_inited = 0; - -int usb_lowlevel_init(void) -{ -#ifdef CONFIG_PCI_OHCI - pci_dev_t pdev; -#endif - -#ifdef CFG_USB_OHCI_CPU_INIT - /* cpu dependant init */ - if(usb_cpu_init()) - return -1; -#endif - -#ifdef CFG_USB_OHCI_BOARD_INIT - /* board dependant init */ - if(usb_board_init()) - return -1; -#endif - memset (&gohci, 0, sizeof (ohci_t)); - - /* align the storage */ - if ((__u32)&ghcca[0] & 0xff) { - err("HCCA not aligned!!"); - return -1; - } - phcca = &ghcca[0]; - info("aligned ghcca %p", phcca); - memset(&ohci_dev, 0, sizeof(struct ohci_device)); - if ((__u32)&ohci_dev.ed[0] & 0x7) { - err("EDs not aligned!!"); - return -1; - } - memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1)); - if ((__u32)gtd & 0x7) { - err("TDs not aligned!!"); - return -1; - } - ptd = gtd; - gohci.hcca = phcca; - memset (phcca, 0, sizeof (struct ohci_hcca)); - - gohci.disabled = 1; - gohci.sleeping = 0; - gohci.irq = -1; -#ifdef CONFIG_PCI_OHCI - pdev = pci_find_devices(ohci_pci_ids, 0); - - if (pdev != -1) { - u16 vid, did; - u32 base; - pci_read_config_word(pdev, PCI_VENDOR_ID, &vid); - pci_read_config_word(pdev, PCI_DEVICE_ID, &did); - printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n", - vid, did, (pdev >> 16) & 0xff, - (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7); - pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); - printf("OHCI regs address 0x%08x\n", base); - gohci.regs = (struct ohci_regs *)base; - } else - return -1; -#else - gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE; -#endif - - gohci.flags = 0; - gohci.slot_name = CFG_USB_OHCI_SLOT_NAME; - - if (hc_reset (&gohci) < 0) { - hc_release_ohci (&gohci); - err ("can't reset usb-%s", gohci.slot_name); -#ifdef CFG_USB_OHCI_BOARD_INIT - /* board dependant cleanup */ - usb_board_init_fail(); -#endif - -#ifdef CFG_USB_OHCI_CPU_INIT - /* cpu dependant cleanup */ - usb_cpu_init_fail(); -#endif - return -1; - } - - /* FIXME this is a second HC reset; why?? */ - /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control); - wait_ms(10); */ - if (hc_start (&gohci) < 0) { - err ("can't start usb-%s", gohci.slot_name); - hc_release_ohci (&gohci); - /* Initialization failed */ -#ifdef CFG_USB_OHCI_BOARD_INIT - /* board dependant cleanup */ - usb_board_stop(); -#endif - -#ifdef CFG_USB_OHCI_CPU_INIT - /* cpu dependant cleanup */ - usb_cpu_stop(); -#endif - return -1; - } - -#ifdef DEBUG - ohci_dump (&gohci, 1); -#else - wait_ms(1); -#endif - ohci_inited = 1; - return 0; -} - -int usb_lowlevel_stop(void) -{ - /* this gets called really early - before the controller has */ - /* even been initialized! */ - if (!ohci_inited) - return 0; - /* TODO release any interrupts, etc. */ - /* call hc_release_ohci() here ? */ - hc_reset (&gohci); - -#ifdef CFG_USB_OHCI_BOARD_INIT - /* board dependant cleanup */ - if(usb_board_stop()) - return -1; -#endif - -#ifdef CFG_USB_OHCI_CPU_INIT - /* cpu dependant cleanup */ - if(usb_cpu_stop()) - return -1; -#endif - - return 0; -} -#endif /* CONFIG_USB_OHCI_NEW */ diff --git a/drivers/usb_ohci.h b/drivers/usb_ohci.h deleted file mode 100644 index 380cb4c927..0000000000 --- a/drivers/usb_ohci.h +++ /dev/null @@ -1,445 +0,0 @@ -/* - * URB OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber - * (C) Copyright 2000-2001 David Brownell - * - * usb-ohci.h - */ - -/* functions for doing board or CPU specific setup/cleanup */ -extern int usb_board_init(void); -extern int usb_board_stop(void); -extern int usb_board_init_fail(void); - -extern int usb_cpu_init(void); -extern int usb_cpu_stop(void); -extern int usb_cpu_init_fail(void); - - -static int cc_to_error[16] = { - -/* mapping of the OHCI CC status to error codes */ - /* No Error */ 0, - /* CRC Error */ USB_ST_CRC_ERR, - /* Bit Stuff */ USB_ST_BIT_ERR, - /* Data Togg */ USB_ST_CRC_ERR, - /* Stall */ USB_ST_STALLED, - /* DevNotResp */ -1, - /* PIDCheck */ USB_ST_BIT_ERR, - /* UnExpPID */ USB_ST_BIT_ERR, - /* DataOver */ USB_ST_BUF_ERR, - /* DataUnder */ USB_ST_BUF_ERR, - /* reservd */ -1, - /* reservd */ -1, - /* BufferOver */ USB_ST_BUF_ERR, - /* BuffUnder */ USB_ST_BUF_ERR, - /* Not Access */ -1, - /* Not Access */ -1 -}; - -/* ED States */ - -#define ED_NEW 0x00 -#define ED_UNLINK 0x01 -#define ED_OPER 0x02 -#define ED_DEL 0x04 -#define ED_URB_DEL 0x08 - -/* usb_ohci_ed */ -struct ed { - __u32 hwINFO; - __u32 hwTailP; - __u32 hwHeadP; - __u32 hwNextED; - - struct ed *ed_prev; - __u8 int_period; - __u8 int_branch; - __u8 int_load; - __u8 int_interval; - __u8 state; - __u8 type; - __u16 last_iso; - struct ed *ed_rm_list; - - struct usb_device *usb_dev; - void *purb; - __u32 unused[2]; -} __attribute((aligned(16))); -typedef struct ed ed_t; - - -/* TD info field */ -#define TD_CC 0xf0000000 -#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) -#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) -#define TD_EC 0x0C000000 -#define TD_T 0x03000000 -#define TD_T_DATA0 0x02000000 -#define TD_T_DATA1 0x03000000 -#define TD_T_TOGGLE 0x00000000 -#define TD_R 0x00040000 -#define TD_DI 0x00E00000 -#define TD_DI_SET(X) (((X) & 0x07)<< 21) -#define TD_DP 0x00180000 -#define TD_DP_SETUP 0x00000000 -#define TD_DP_IN 0x00100000 -#define TD_DP_OUT 0x00080000 - -#define TD_ISO 0x00010000 -#define TD_DEL 0x00020000 - -/* CC Codes */ -#define TD_CC_NOERROR 0x00 -#define TD_CC_CRC 0x01 -#define TD_CC_BITSTUFFING 0x02 -#define TD_CC_DATATOGGLEM 0x03 -#define TD_CC_STALL 0x04 -#define TD_DEVNOTRESP 0x05 -#define TD_PIDCHECKFAIL 0x06 -#define TD_UNEXPECTEDPID 0x07 -#define TD_DATAOVERRUN 0x08 -#define TD_DATAUNDERRUN 0x09 -#define TD_BUFFEROVERRUN 0x0C -#define TD_BUFFERUNDERRUN 0x0D -#define TD_NOTACCESSED 0x0F - - -#define MAXPSW 1 - -struct td { - __u32 hwINFO; - __u32 hwCBP; /* Current Buffer Pointer */ - __u32 hwNextTD; /* Next TD Pointer */ - __u32 hwBE; /* Memory Buffer End Pointer */ - -/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */ - __u16 hwPSW[MAXPSW]; -/* #endif */ - __u8 unused; - __u8 index; - struct ed *ed; - struct td *next_dl_td; - struct usb_device *usb_dev; - int transfer_len; - __u32 data; - - __u32 unused2[2]; -} __attribute((aligned(32))); -typedef struct td td_t; - -#define OHCI_ED_SKIP (1 << 14) - -/* - * The HCCA (Host Controller Communications Area) is a 256 byte - * structure defined in the OHCI spec. that the host controller is - * told the base address of. It must be 256-byte aligned. - */ - -#define NUM_INTS 32 /* part of the OHCI standard */ -struct ohci_hcca { - __u32 int_table[NUM_INTS]; /* Interrupt ED table */ -#if defined(CONFIG_MPC5200) - __u16 pad1; /* set to 0 on each frame_no change */ - __u16 frame_no; /* current frame number */ -#else - __u16 frame_no; /* current frame number */ - __u16 pad1; /* set to 0 on each frame_no change */ -#endif - __u32 done_head; /* info returned for an interrupt */ - u8 reserved_for_hc[116]; -} __attribute((aligned(256))); - - -/* - * Maximum number of root hub ports. - */ -#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS -# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!" -#endif - -/* - * This is the structure of the OHCI controller's memory mapped I/O - * region. This is Memory Mapped I/O. You must use the readl() and - * writel() macros defined in asm/io.h to access these!! - */ -struct ohci_regs { - /* control and status registers */ - __u32 revision; - __u32 control; - __u32 cmdstatus; - __u32 intrstatus; - __u32 intrenable; - __u32 intrdisable; - /* memory pointers */ - __u32 hcca; - __u32 ed_periodcurrent; - __u32 ed_controlhead; - __u32 ed_controlcurrent; - __u32 ed_bulkhead; - __u32 ed_bulkcurrent; - __u32 donehead; - /* frame counters */ - __u32 fminterval; - __u32 fmremaining; - __u32 fmnumber; - __u32 periodicstart; - __u32 lsthresh; - /* Root hub ports */ - struct ohci_roothub_regs { - __u32 a; - __u32 b; - __u32 status; - __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS]; - } roothub; -} __attribute((aligned(32))); - - -/* OHCI CONTROL AND STATUS REGISTER MASKS */ - -/* - * HcControl (control) register masks - */ -#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ -#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ -#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ -#define OHCI_CTRL_CLE (1 << 4) /* control list enable */ -#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ -#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ -#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ -#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ -#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ - -/* pre-shifted values for HCFS */ -# define OHCI_USB_RESET (0 << 6) -# define OHCI_USB_RESUME (1 << 6) -# define OHCI_USB_OPER (2 << 6) -# define OHCI_USB_SUSPEND (3 << 6) - -/* - * HcCommandStatus (cmdstatus) register masks - */ -#define OHCI_HCR (1 << 0) /* host controller reset */ -#define OHCI_CLF (1 << 1) /* control list filled */ -#define OHCI_BLF (1 << 2) /* bulk list filled */ -#define OHCI_OCR (1 << 3) /* ownership change request */ -#define OHCI_SOC (3 << 16) /* scheduling overrun count */ - -/* - * masks used with interrupt registers: - * HcInterruptStatus (intrstatus) - * HcInterruptEnable (intrenable) - * HcInterruptDisable (intrdisable) - */ -#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ -#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ -#define OHCI_INTR_SF (1 << 2) /* start frame */ -#define OHCI_INTR_RD (1 << 3) /* resume detect */ -#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ -#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ -#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ -#define OHCI_INTR_OC (1 << 30) /* ownership change */ -#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ - - -/* Virtual Root HUB */ -struct virt_root_hub { - int devnum; /* Address of Root Hub endpoint */ - void *dev; /* was urb */ - void *int_addr; - int send; - int interval; -}; - -/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */ - -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 - -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 - - -/* OHCI ROOT HUB REGISTER MASKS */ - -/* roothub.portstatus [i] bits */ -#define RH_PS_CCS 0x00000001 /* current connect status */ -#define RH_PS_PES 0x00000002 /* port enable status*/ -#define RH_PS_PSS 0x00000004 /* port suspend status */ -#define RH_PS_POCI 0x00000008 /* port over current indicator */ -#define RH_PS_PRS 0x00000010 /* port reset status */ -#define RH_PS_PPS 0x00000100 /* port power status */ -#define RH_PS_LSDA 0x00000200 /* low speed device attached */ -#define RH_PS_CSC 0x00010000 /* connect status change */ -#define RH_PS_PESC 0x00020000 /* port enable status change */ -#define RH_PS_PSSC 0x00040000 /* port suspend status change */ -#define RH_PS_OCIC 0x00080000 /* over current indicator change */ -#define RH_PS_PRSC 0x00100000 /* port reset status change */ - -/* roothub.status bits */ -#define RH_HS_LPS 0x00000001 /* local power status */ -#define RH_HS_OCI 0x00000002 /* over current indicator */ -#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ -#define RH_HS_LPSC 0x00010000 /* local power status change */ -#define RH_HS_OCIC 0x00020000 /* over current indicator change */ -#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ - -/* roothub.b masks */ -#define RH_B_DR 0x0000ffff /* device removable flags */ -#define RH_B_PPCM 0xffff0000 /* port power control mask */ - -/* roothub.a masks */ -#define RH_A_NDP (0xff << 0) /* number of downstream ports */ -#define RH_A_PSM (1 << 8) /* power switching mode */ -#define RH_A_NPS (1 << 9) /* no power switching */ -#define RH_A_DT (1 << 10) /* device type (mbz) */ -#define RH_A_OCPM (1 << 11) /* over current protection mode */ -#define RH_A_NOCP (1 << 12) /* no over current protection */ -#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ - -/* urb */ -#define N_URB_TD 48 -typedef struct -{ - ed_t *ed; - __u16 length; /* number of tds associated with this request */ - __u16 td_cnt; /* number of tds already serviced */ - struct usb_device *dev; - int state; - unsigned long pipe; - void *transfer_buffer; - int transfer_buffer_length; - int interval; - int actual_length; - int finished; - td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */ -} urb_priv_t; -#define URB_DEL 1 - -/* - * This is the full ohci controller description - * - * Note how the "proper" USB information is just - * a subset of what the full implementation needs. (Linus) - */ - - -typedef struct ohci { - struct ohci_hcca *hcca; /* hcca */ - /*dma_addr_t hcca_dma;*/ - - int irq; - int disabled; /* e.g. got a UE, we're hung */ - int sleeping; - unsigned long flags; /* for HC bugs */ - - struct ohci_regs *regs; /* OHCI controller's memory */ - - int ohci_int_load[32]; /* load of the 32 Interrupt Chains (for load balancing)*/ - ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */ - ed_t *ed_bulktail; /* last endpoint of bulk list */ - ed_t *ed_controltail; /* last endpoint of control list */ - int intrstatus; - __u32 hc_control; /* copy of the hc control reg */ - struct usb_device *dev[32]; - struct virt_root_hub rh; - - const char *slot_name; -} ohci_t; - -#define NUM_EDS 8 /* num of preallocated endpoint descriptors */ - -struct ohci_device { - ed_t ed[NUM_EDS]; - int ed_cnt; -}; - -/* hcd */ -/* endpoint */ -static int ep_link(ohci_t * ohci, ed_t * ed); -static int ep_unlink(ohci_t * ohci, ed_t * ed); -static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe, - int interval, int load); - -/*-------------------------------------------------------------------------*/ - -/* we need more TDs than EDs */ -#define NUM_TD 64 - -/* +1 so we can align the storage */ -td_t gtd[NUM_TD+1]; -/* pointers to aligned storage */ -td_t *ptd; - -/* TDs ... */ -static inline struct td * -td_alloc (struct usb_device *usb_dev) -{ - int i; - struct td *td; - - td = NULL; - for (i = 0; i < NUM_TD; i++) - { - if (ptd[i].usb_dev == NULL) - { - td = &ptd[i]; - td->usb_dev = usb_dev; - break; - } - } - - return td; -} - -static inline void -ed_free (struct ed *ed) -{ - ed->usb_dev = NULL; -} diff --git a/drivers/usbdcore.c b/drivers/usbdcore.c deleted file mode 100644 index 308c7ceccc..0000000000 --- a/drivers/usbdcore.c +++ /dev/null @@ -1,684 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * Based on - * linux/drivers/usbd/usbd.c.c - USB Device Core Layer - * - * Copyright (c) 2000, 2001, 2002 Lineo - * Copyright (c) 2001 Hewlett Packard - * - * By: - * Stuart Lynne , - * Tom Rushworth , - * Bruce Balden - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include "usbdcore.h" - -#define MAX_INTERFACES 2 - - -int maxstrings = 20; - -/* Global variables ************************************************************************** */ - -struct usb_string_descriptor **usb_strings; - -int usb_devices; - -extern struct usb_function_driver ep0_driver; - -int registered_functions; -int registered_devices; - -char *usbd_device_events[] = { - "DEVICE_UNKNOWN", - "DEVICE_INIT", - "DEVICE_CREATE", - "DEVICE_HUB_CONFIGURED", - "DEVICE_RESET", - "DEVICE_ADDRESS_ASSIGNED", - "DEVICE_CONFIGURED", - "DEVICE_SET_INTERFACE", - "DEVICE_SET_FEATURE", - "DEVICE_CLEAR_FEATURE", - "DEVICE_DE_CONFIGURED", - "DEVICE_BUS_INACTIVE", - "DEVICE_BUS_ACTIVITY", - "DEVICE_POWER_INTERRUPTION", - "DEVICE_HUB_RESET", - "DEVICE_DESTROY", - "DEVICE_FUNCTION_PRIVATE", -}; - -char *usbd_device_states[] = { - "STATE_INIT", - "STATE_CREATED", - "STATE_ATTACHED", - "STATE_POWERED", - "STATE_DEFAULT", - "STATE_ADDRESSED", - "STATE_CONFIGURED", - "STATE_UNKNOWN", -}; - -char *usbd_device_requests[] = { - "GET STATUS", /* 0 */ - "CLEAR FEATURE", /* 1 */ - "RESERVED", /* 2 */ - "SET FEATURE", /* 3 */ - "RESERVED", /* 4 */ - "SET ADDRESS", /* 5 */ - "GET DESCRIPTOR", /* 6 */ - "SET DESCRIPTOR", /* 7 */ - "GET CONFIGURATION", /* 8 */ - "SET CONFIGURATION", /* 9 */ - "GET INTERFACE", /* 10 */ - "SET INTERFACE", /* 11 */ - "SYNC FRAME", /* 12 */ -}; - -char *usbd_device_descriptors[] = { - "UNKNOWN", /* 0 */ - "DEVICE", /* 1 */ - "CONFIG", /* 2 */ - "STRING", /* 3 */ - "INTERFACE", /* 4 */ - "ENDPOINT", /* 5 */ - "DEVICE QUALIFIER", /* 6 */ - "OTHER SPEED", /* 7 */ - "INTERFACE POWER", /* 8 */ -}; - -char *usbd_device_status[] = { - "USBD_OPENING", - "USBD_OK", - "USBD_SUSPENDED", - "USBD_CLOSING", -}; - - -/* Descriptor support functions ************************************************************** */ - - -/** - * usbd_get_string - find and return a string descriptor - * @index: string index to return - * - * Find an indexed string and return a pointer to a it. - */ -struct usb_string_descriptor *usbd_get_string (__u8 index) -{ - if (index >= maxstrings) { - return NULL; - } - return usb_strings[index]; -} - - -/* Access to device descriptor functions ***************************************************** */ - - -/* * - * usbd_device_configuration_instance - find a configuration instance for this device - * @device: - * @configuration: index to configuration, 0 - N-1 - * - * Get specifed device configuration. Index should be bConfigurationValue-1. - */ -static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device, - unsigned int port, unsigned int configuration) -{ - /* XXX */ - configuration = configuration ? configuration - 1 : 0; - - if (configuration >= device->configurations) { - return NULL; - } - return device->configuration_instance_array + configuration; -} - - -/* * - * usbd_device_interface_instance - * @device: - * @configuration: index to configuration, 0 - N-1 - * @interface: index to interface - * - * Return the specified interface descriptor for the specified device. - */ -struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *device, int port, int configuration, int interface) -{ - struct usb_configuration_instance *configuration_instance; - - if ((configuration_instance = usbd_device_configuration_instance (device, port, configuration)) == NULL) { - return NULL; - } - if (interface >= configuration_instance->interfaces) { - return NULL; - } - return configuration_instance->interface_instance_array + interface; -} - -/* * - * usbd_device_alternate_descriptor_list - * @device: - * @configuration: index to configuration, 0 - N-1 - * @interface: index to interface - * @alternate: alternate setting - * - * Return the specified alternate descriptor for the specified device. - */ -struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *device, int port, int configuration, int interface, int alternate) -{ - struct usb_interface_instance *interface_instance; - - if ((interface_instance = usbd_device_interface_instance (device, port, configuration, interface)) == NULL) { - return NULL; - } - - if (alternate >= interface_instance->alternates) { - return NULL; - } - - return interface_instance->alternates_instance_array + alternate; -} - - -/* * - * usbd_device_device_descriptor - * @device: which device - * @configuration: index to configuration, 0 - N-1 - * @port: which port - * - * Return the specified configuration descriptor for the specified device. - */ -struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port) -{ - return (device->device_descriptor); -} - - -/** - * usbd_device_configuration_descriptor - * @device: which device - * @port: which port - * @configuration: index to configuration, 0 - N-1 - * - * Return the specified configuration descriptor for the specified device. - */ -struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct - usb_device_instance - *device, int port, int configuration) -{ - struct usb_configuration_instance *configuration_instance; - if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) { - return NULL; - } - return (configuration_instance->configuration_descriptor); -} - - -/** - * usbd_device_interface_descriptor - * @device: which device - * @port: which port - * @configuration: index to configuration, 0 - N-1 - * @interface: index to interface - * @alternate: alternate setting - * - * Return the specified interface descriptor for the specified device. - */ -struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance - *device, int port, int configuration, int interface, int alternate) -{ - struct usb_interface_instance *interface_instance; - if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) { - return NULL; - } - if ((alternate < 0) || (alternate >= interface_instance->alternates)) { - return NULL; - } - return (interface_instance->alternates_instance_array[alternate].interface_descriptor); -} - -/** - * usbd_device_endpoint_descriptor_index - * @device: which device - * @port: which port - * @configuration: index to configuration, 0 - N-1 - * @interface: index to interface - * @alternate: index setting - * @index: which index - * - * Return the specified endpoint descriptor for the specified device. - */ -struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance - *device, int port, int configuration, int interface, int alternate, int index) -{ - struct usb_alternate_instance *alternate_instance; - - if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) { - return NULL; - } - if (index >= alternate_instance->endpoints) { - return NULL; - } - return *(alternate_instance->endpoints_descriptor_array + index); -} - - -/** - * usbd_device_endpoint_transfersize - * @device: which device - * @port: which port - * @configuration: index to configuration, 0 - N-1 - * @interface: index to interface - * @index: which index - * - * Return the specified endpoint transfer size; - */ -int usbd_device_endpoint_transfersize (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int index) -{ - struct usb_alternate_instance *alternate_instance; - - if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) { - return 0; - } - if (index >= alternate_instance->endpoints) { - return 0; - } - return *(alternate_instance->endpoint_transfersize_array + index); -} - - -/** - * usbd_device_endpoint_descriptor - * @device: which device - * @port: which port - * @configuration: index to configuration, 0 - N-1 - * @interface: index to interface - * @alternate: alternate setting - * @endpoint: which endpoint - * - * Return the specified endpoint descriptor for the specified device. - */ -struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int endpoint) -{ - struct usb_endpoint_descriptor *endpoint_descriptor; - int i; - - for (i = 0; !(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, configuration, interface, alternate, i)); i++) { - if (endpoint_descriptor->bEndpointAddress == endpoint) { - return endpoint_descriptor; - } - } - return NULL; -} - -/** - * usbd_endpoint_halted - * @device: point to struct usb_device_instance - * @endpoint: endpoint to check - * - * Return non-zero if endpoint is halted. - */ -int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint) -{ - return (device->status == USB_STATUS_HALT); -} - - -/** - * usbd_rcv_complete - complete a receive - * @endpoint: - * @len: - * @urb_bad: - * - * Called from rcv interrupt to complete. - */ -void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad) -{ - if (endpoint) { - struct urb *rcv_urb; - - /*usbdbg("len: %d urb: %p\n", len, endpoint->rcv_urb); */ - - /* if we had an urb then update actual_length, dispatch if neccessary */ - if ((rcv_urb = endpoint->rcv_urb)) { - - /*usbdbg("actual: %d buffer: %d\n", */ - /*rcv_urb->actual_length, rcv_urb->buffer_length); */ - - /* check the urb is ok, are we adding data less than the packetsize */ - if (!urb_bad && (len <= endpoint->rcv_packetSize)) { - /*usbdbg("updating actual_length by %d\n",len); */ - - /* increment the received data size */ - rcv_urb->actual_length += len; - - } else { - usberr(" RECV_ERROR actual: %d buffer: %d urb_bad: %d\n", - rcv_urb->actual_length, rcv_urb->buffer_length, urb_bad); - - rcv_urb->actual_length = 0; - rcv_urb->status = RECV_ERROR; - } - } else { - usberr("no rcv_urb!"); - } - } else { - usberr("no endpoint!"); - } - -} - -/** - * usbd_tx_complete - complete a transmit - * @endpoint: - * @resetart: - * - * Called from tx interrupt to complete. - */ -void usbd_tx_complete (struct usb_endpoint_instance *endpoint) -{ - if (endpoint) { - struct urb *tx_urb; - - /* if we have a tx_urb advance or reset, finish if complete */ - if ((tx_urb = endpoint->tx_urb)) { - int sent = endpoint->last; - endpoint->sent += sent; - endpoint->last -= sent; - - if( (endpoint->tx_urb->actual_length - endpoint->sent) <= 0 ) { - tx_urb->actual_length = 0; - endpoint->sent = 0; - endpoint->last = 0; - - /* Remove from active, save for re-use */ - urb_detach(tx_urb); - urb_append(&endpoint->done, tx_urb); - /*usbdbg("done->next %p, tx_urb %p, done %p", */ - /* endpoint->done.next, tx_urb, &endpoint->done); */ - - endpoint->tx_urb = first_urb_detached(&endpoint->tx); - if( endpoint->tx_urb ) { - endpoint->tx_queue--; - usbdbg("got urb from tx list"); - } - if( !endpoint->tx_urb ) { - /*usbdbg("taking urb from done list"); */ - endpoint->tx_urb = first_urb_detached(&endpoint->done); - } - if( !endpoint->tx_urb ) { - usbdbg("allocating new urb for tx_urb"); - endpoint->tx_urb = usbd_alloc_urb(tx_urb->device, endpoint); - } - } - } - } -} - -/* URB linked list functions ***************************************************** */ - -/* - * Initialize an urb_link to be a single element list. - * If the urb_link is being used as a distinguished list head - * the list is empty when the head is the only link in the list. - */ -void urb_link_init (urb_link * ul) -{ - if (ul) { - ul->prev = ul->next = ul; - } -} - -/* - * Detach an urb_link from a list, and set it - * up as a single element list, so no dangling - * pointers can be followed, and so it can be - * joined to another list if so desired. - */ -void urb_detach (struct urb *urb) -{ - if (urb) { - urb_link *ul = &urb->link; - ul->next->prev = ul->prev; - ul->prev->next = ul->next; - urb_link_init (ul); - } -} - -/* - * Return the first urb_link in a list with a distinguished - * head "hd", or NULL if the list is empty. This will also - * work as a predicate, returning NULL if empty, and non-NULL - * otherwise. - */ -urb_link *first_urb_link (urb_link * hd) -{ - urb_link *nx; - if (NULL != hd && NULL != (nx = hd->next) && nx != hd) { - /* There is at least one element in the list */ - /* (besides the distinguished head). */ - return (nx); - } - /* The list is empty */ - return (NULL); -} - -/* - * Return the first urb in a list with a distinguished - * head "hd", or NULL if the list is empty. - */ -struct urb *first_urb (urb_link * hd) -{ - urb_link *nx; - if (NULL == (nx = first_urb_link (hd))) { - /* The list is empty */ - return (NULL); - } - return (p2surround (struct urb, link, nx)); -} - -/* - * Detach and return the first urb in a list with a distinguished - * head "hd", or NULL if the list is empty. - * - */ -struct urb *first_urb_detached (urb_link * hd) -{ - struct urb *urb; - if ((urb = first_urb (hd))) { - urb_detach (urb); - } - return urb; -} - - -/* - * Append an urb_link (or a whole list of - * urb_links) to the tail of another list - * of urb_links. - */ -void urb_append (urb_link * hd, struct urb *urb) -{ - if (hd && urb) { - urb_link *new = &urb->link; - - /* This allows the new urb to be a list of urbs, */ - /* with new pointing at the first, but the link */ - /* must be initialized. */ - /* Order is important here... */ - urb_link *pul = hd->prev; - new->prev->next = hd; - hd->prev = new->prev; - new->prev = pul; - pul->next = new; - } -} - -/* URB create/destroy functions ***************************************************** */ - -/** - * usbd_alloc_urb - allocate an URB appropriate for specified endpoint - * @device: device instance - * @endpoint: endpoint - * - * Allocate an urb structure. The usb device urb structure is used to - * contain all data associated with a transfer, including a setup packet for - * control transfers. - * - * NOTE: endpoint_address MUST contain a direction flag. - */ -struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint) -{ - struct urb *urb; - - if( !(urb = (struct urb*)malloc(sizeof(struct urb))) ) { - usberr(" F A T A L: malloc(%u) FAILED!!!!", sizeof(struct urb)); - return NULL; - } - - /* Fill in known fields */ - memset(urb, 0, sizeof(struct urb)); - urb->endpoint = endpoint; - urb->device = device; - urb->buffer = (u8*)urb->buffer_data; - urb->buffer_length = sizeof(urb->buffer_data); - - urb_link_init (&urb->link); - - return urb; -} - -/** - * usbd_dealloc_urb - deallocate an URB and associated buffer - * @urb: pointer to an urb structure - * - * Deallocate an urb structure and associated data. - */ -void usbd_dealloc_urb (struct urb *urb) -{ - if (urb) { - free (urb); - } -} - -/* Event signaling functions ***************************************************** */ - -/** - * usbd_device_event - called to respond to various usb events - * @device: pointer to struct device - * @event: event to respond to - * - * Used by a Bus driver to indicate an event. - */ -void usbd_device_event_irq (struct usb_device_instance *device, usb_device_event_t event, int data) -{ - usb_device_state_t state; - - if (!device || !device->bus) { - usberr("(%p,%d) NULL device or device->bus", device, event); - return; - } - - state = device->device_state; - - usbinfo("%s", usbd_device_events[event]); - - switch (event) { - case DEVICE_UNKNOWN: - break; - case DEVICE_INIT: - device->device_state = STATE_INIT; - break; - - case DEVICE_CREATE: - device->device_state = STATE_ATTACHED; - break; - - case DEVICE_HUB_CONFIGURED: - device->device_state = STATE_POWERED; - break; - - case DEVICE_RESET: - device->device_state = STATE_DEFAULT; - device->address = 0; - break; - - case DEVICE_ADDRESS_ASSIGNED: - device->device_state = STATE_ADDRESSED; - break; - - case DEVICE_CONFIGURED: - device->device_state = STATE_CONFIGURED; - break; - - case DEVICE_DE_CONFIGURED: - device->device_state = STATE_ADDRESSED; - break; - - case DEVICE_BUS_INACTIVE: - if (device->status != USBD_CLOSING) { - device->status = USBD_SUSPENDED; - } - break; - case DEVICE_BUS_ACTIVITY: - if (device->status != USBD_CLOSING) { - device->status = USBD_OK; - } - break; - - case DEVICE_SET_INTERFACE: - break; - case DEVICE_SET_FEATURE: - break; - case DEVICE_CLEAR_FEATURE: - break; - - case DEVICE_POWER_INTERRUPTION: - device->device_state = STATE_POWERED; - break; - case DEVICE_HUB_RESET: - device->device_state = STATE_ATTACHED; - break; - case DEVICE_DESTROY: - device->device_state = STATE_UNKNOWN; - break; - - case DEVICE_FUNCTION_PRIVATE: - break; - - default: - usbdbg("event %d - not handled",event); - break; - } - /*usbdbg("%s event: %d oldstate: %d newstate: %d status: %d address: %d", - device->name, event, state, - device->device_state, device->status, device->address); */ - - /* tell the bus interface driver */ - if( device->event ) { - /* usbdbg("calling device->event"); */ - device->event(device, event, data); - } -} diff --git a/drivers/usbdcore_ep0.c b/drivers/usbdcore_ep0.c deleted file mode 100644 index 1e44f322a7..0000000000 --- a/drivers/usbdcore_ep0.c +++ /dev/null @@ -1,607 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * (C) Copyright 2006 - * Bryan O'Donoghue, deckard@CodeHermit.ie - * - * Based on - * linux/drivers/usbd/ep0.c - * - * Copyright (c) 2000, 2001, 2002 Lineo - * Copyright (c) 2001 Hewlett Packard - * - * By: - * Stuart Lynne , - * Tom Rushworth , - * Bruce Balden - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -/* - * This is the builtin ep0 control function. It implements all required functionality - * for responding to control requests (SETUP packets). - * - * XXX - * - * Currently we do not pass any SETUP packets (or other) to the configured - * function driver. This may need to change. - * - * XXX - * - * As alluded to above, a simple callback cdc_recv_setup has been implemented - * in the usb_device data structure to facilicate passing - * Common Device Class packets to a function driver. - * - * XXX - */ - -#include - -#if defined(CONFIG_USB_DEVICE) -#include "usbdcore.h" - -#if 0 -#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args) -#else -#define dbg_ep0(lvl,fmt,args...) -#endif - -/* EP0 Configuration Set ********************************************************************* */ - - -/** - * ep0_get_status - fill in URB data with appropriate status - * @device: - * @urb: - * @index: - * @requesttype: - * - */ -static int ep0_get_status (struct usb_device_instance *device, - struct urb *urb, int index, int requesttype) -{ - char *cp; - - urb->actual_length = 2; - cp = (char*)urb->buffer; - cp[0] = cp[1] = 0; - - switch (requesttype) { - case USB_REQ_RECIPIENT_DEVICE: - cp[0] = USB_STATUS_SELFPOWERED; - break; - case USB_REQ_RECIPIENT_INTERFACE: - break; - case USB_REQ_RECIPIENT_ENDPOINT: - cp[0] = usbd_endpoint_halted (device, index); - break; - case USB_REQ_RECIPIENT_OTHER: - urb->actual_length = 0; - default: - break; - } - dbg_ep0 (2, "%02x %02x", cp[0], cp[1]); - return 0; -} - -/** - * ep0_get_one - * @device: - * @urb: - * @result: - * - * Set a single byte value in the urb send buffer. Return non-zero to signal - * a request error. - */ -static int ep0_get_one (struct usb_device_instance *device, struct urb *urb, - __u8 result) -{ - urb->actual_length = 1; /* XXX 2? */ - ((char *) urb->buffer)[0] = result; - return 0; -} - -/** - * copy_config - * @urb: pointer to urb - * @data: pointer to configuration data - * @length: length of data - * - * Copy configuration data to urb transfer buffer if there is room for it. - */ -void copy_config (struct urb *urb, void *data, int max_length, - int max_buf) -{ - int available; - int length; - - /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */ - /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */ - - if (!data) { - dbg_ep0 (1, "data is NULL"); - return; - } - length = max_length; - - if (length > max_length) { - dbg_ep0 (1, "length: %d >= max_length: %d", length, - max_length); - return; - } - /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */ - /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */ - - if ((available = - /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) { - return; - } - /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */ - /* urb->actual_length, urb->buffer_length, max_buf, length, available); */ - - if (length > available) { - length = available; - } - /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */ - /* urb->actual_length, urb->buffer_length, max_buf, length, available); */ - - memcpy (urb->buffer + urb->actual_length, data, length); - urb->actual_length += length; - - dbg_ep0 (3, - "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d", - urb->actual_length, urb->buffer_length, max_buf, max_length, - available); -} - -/** - * ep0_get_descriptor - * @device: - * @urb: - * @max: - * @descriptor_type: - * @index: - * - * Called by ep0_rx_process for a get descriptor device command. Determine what - * descriptor is being requested, copy to send buffer. Return zero if ok to send, - * return non-zero to signal a request error. - */ -static int ep0_get_descriptor (struct usb_device_instance *device, - struct urb *urb, int max, int descriptor_type, - int index) -{ - int port = 0; /* XXX compound device */ - char *cp; - - /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */ - - if (!urb || !urb->buffer || !urb->buffer_length - || (urb->buffer_length < 255)) { - dbg_ep0 (2, "invalid urb %p", urb); - return -1L; - } - - /* setup tx urb */ - urb->actual_length = 0; - cp = (char*)urb->buffer; - - dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type)); - - switch (descriptor_type) { - case USB_DESCRIPTOR_TYPE_DEVICE: - { - struct usb_device_descriptor *device_descriptor; - if (! - (device_descriptor = - usbd_device_device_descriptor (device, port))) { - return -1; - } - /* copy descriptor for this device */ - copy_config (urb, device_descriptor, - sizeof (struct usb_device_descriptor), - max); - - /* correct the correct control endpoint 0 max packet size into the descriptor */ - device_descriptor = - (struct usb_device_descriptor *) urb->buffer; - - } - dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length); - break; - - case USB_DESCRIPTOR_TYPE_CONFIGURATION: - { - struct usb_configuration_descriptor - *configuration_descriptor; - struct usb_device_descriptor *device_descriptor; - if (! - (device_descriptor = - usbd_device_device_descriptor (device, port))) { - return -1; - } - /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */ - if (index > device_descriptor->bNumConfigurations) { - dbg_ep0 (0, "index too large: %d > %d", index, - device_descriptor-> - bNumConfigurations); - return -1; - } - - if (! - (configuration_descriptor = - usbd_device_configuration_descriptor (device, - port, - index))) { - dbg_ep0 (0, - "usbd_device_configuration_descriptor failed: %d", - index); - return -1; - } - dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength)); - copy_config (urb, configuration_descriptor, - - cpu_to_le16(configuration_descriptor->wTotalLength), - max); - } - - break; - - case USB_DESCRIPTOR_TYPE_STRING: - { - struct usb_string_descriptor *string_descriptor; - if (!(string_descriptor = usbd_get_string (index))) { - serial_printf("Invalid string index %d\n", index); - return -1; - } - dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength); - copy_config (urb, string_descriptor, string_descriptor->bLength, max); - } - break; - case USB_DESCRIPTOR_TYPE_INTERFACE: - serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n"); - return -1; - case USB_DESCRIPTOR_TYPE_ENDPOINT: - serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n"); - return -1; - case USB_DESCRIPTOR_TYPE_HID: - { - serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n"); - return -1; /* unsupported at this time */ -#if 0 - int bNumInterface = - le16_to_cpu (urb->device_request.wIndex); - int bAlternateSetting = 0; - int class = 0; - struct usb_class_descriptor *class_descriptor; - - if (!(class_descriptor = - usbd_device_class_descriptor_index (device, - port, 0, - bNumInterface, - bAlternateSetting, - class)) - || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) { - dbg_ep0 (3, "[%d] interface is not HID", - bNumInterface); - return -1; - } - /* copy descriptor for this class */ - copy_config (urb, class_descriptor, - class_descriptor->descriptor.hid.bLength, - max); -#endif - } - break; - case USB_DESCRIPTOR_TYPE_REPORT: - { - serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n"); - return -1; /* unsupported at this time */ -#if 0 - int bNumInterface = - le16_to_cpu (urb->device_request.wIndex); - int bAlternateSetting = 0; - int class = 0; - struct usb_class_report_descriptor *report_descriptor; - - if (!(report_descriptor = - usbd_device_class_report_descriptor_index - (device, port, 0, bNumInterface, - bAlternateSetting, class)) - || report_descriptor->bDescriptorType != - USB_DT_REPORT) { - dbg_ep0 (3, "[%d] descriptor is not REPORT", - bNumInterface); - return -1; - } - /* copy report descriptor for this class */ - /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */ - if (max - urb->actual_length > 0) { - int length = - MIN (report_descriptor->wLength, - max - urb->actual_length); - memcpy (urb->buffer + urb->actual_length, - &report_descriptor->bData[0], length); - urb->actual_length += length; - } -#endif - } - break; - case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER: - { - /* If a USB device supports both a full speed and low speed operation - * we must send a Device_Qualifier descriptor here - */ - return -1; - } - default: - return -1; - } - - - dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d", - urb->buffer, urb->buffer_length, urb->actual_length, - device->bus->endpoint_array[0].tx_packetSize); -/* - if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) { - dbg_ep0(0, "adding null byte"); - urb->buffer[urb->actual_length++] = 0; - dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d", - urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize); - } -*/ - return 0; - -} - -/** - * ep0_recv_setup - called to indicate URB has been received - * @urb: pointer to struct urb - * - * Check if this is a setup packet, process the device request, put results - * back into the urb and return zero or non-zero to indicate success (DATA) - * or failure (STALL). - * - */ -int ep0_recv_setup (struct urb *urb) -{ - /*struct usb_device_request *request = urb->buffer; */ - /*struct usb_device_instance *device = urb->device; */ - - struct usb_device_request *request; - struct usb_device_instance *device; - int address; - - dbg_ep0 (0, "entering ep0_recv_setup()"); - if (!urb || !urb->device) { - dbg_ep0 (3, "invalid URB %p", urb); - return -1; - } - - request = &urb->device_request; - device = urb->device; - - dbg_ep0 (3, "urb: %p device: %p", urb, urb->device); - - - /*dbg_ep0(2, "- - - - - - - - - -"); */ - - dbg_ep0 (2, - "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s", - request->bmRequestType, request->bRequest, - le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex), - le16_to_cpu (request->wLength), - USBD_DEVICE_REQUESTS (request->bRequest)); - - /* handle USB Standard Request (c.f. USB Spec table 9-2) */ - if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { - if(device->device_state <= STATE_CONFIGURED){ - /* Attempt to handle a CDC specific request if we are - * in the configured state. - */ - return device->cdc_recv_setup(request,urb); - } - dbg_ep0 (1, "non standard request: %x", - request->bmRequestType & USB_REQ_TYPE_MASK); - return -1; /* Stall here */ - } - - switch (device->device_state) { - case STATE_CREATED: - case STATE_ATTACHED: - case STATE_POWERED: - /* It actually is important to allow requests in these states, - * Windows will request descriptors before assigning an - * address to the client. - */ - - /*dbg_ep0 (1, "request %s not allowed in this state: %s", */ - /* USBD_DEVICE_REQUESTS(request->bRequest), */ - /* usbd_device_states[device->device_state]); */ - /*return -1; */ - break; - - case STATE_INIT: - case STATE_DEFAULT: - switch (request->bRequest) { - case USB_REQ_GET_STATUS: - case USB_REQ_GET_INTERFACE: - case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */ - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - case USB_REQ_SET_DESCRIPTOR: - /* case USB_REQ_SET_CONFIGURATION: */ - case USB_REQ_SET_INTERFACE: - dbg_ep0 (1, - "request %s not allowed in DEFAULT state: %s", - USBD_DEVICE_REQUESTS (request->bRequest), - usbd_device_states[device->device_state]); - return -1; - - case USB_REQ_SET_CONFIGURATION: - case USB_REQ_SET_ADDRESS: - case USB_REQ_GET_DESCRIPTOR: - case USB_REQ_GET_CONFIGURATION: - break; - } - case STATE_ADDRESSED: - case STATE_CONFIGURED: - break; - case STATE_UNKNOWN: - dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s", - USBD_DEVICE_REQUESTS (request->bRequest), - usbd_device_states[device->device_state]); - return -1; - } - - /* handle all requests that return data (direction bit set on bm RequestType) */ - if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) { - - dbg_ep0 (3, "Device-to-Host"); - - switch (request->bRequest) { - - case USB_REQ_GET_STATUS: - return ep0_get_status (device, urb, request->wIndex, - request->bmRequestType & - USB_REQ_RECIPIENT_MASK); - - case USB_REQ_GET_DESCRIPTOR: - return ep0_get_descriptor (device, urb, - le16_to_cpu (request->wLength), - le16_to_cpu (request->wValue) >> 8, - le16_to_cpu (request->wValue) & 0xff); - - case USB_REQ_GET_CONFIGURATION: - serial_printf("get config %d\n", device->configuration); - return ep0_get_one (device, urb, - device->configuration); - - case USB_REQ_GET_INTERFACE: - return ep0_get_one (device, urb, device->alternate); - - case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */ - return -1; - - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - case USB_REQ_SET_ADDRESS: - case USB_REQ_SET_DESCRIPTOR: - case USB_REQ_SET_CONFIGURATION: - case USB_REQ_SET_INTERFACE: - return -1; - } - } - /* handle the requests that do not return data */ - else { - - - /*dbg_ep0(3, "Host-to-Device"); */ - switch (request->bRequest) { - - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - dbg_ep0 (0, "Host-to-Device"); - switch (request-> - bmRequestType & USB_REQ_RECIPIENT_MASK) { - case USB_REQ_RECIPIENT_DEVICE: - /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */ - /* XXX fall through for now as we do not support either */ - case USB_REQ_RECIPIENT_INTERFACE: - case USB_REQ_RECIPIENT_OTHER: - dbg_ep0 (0, "request %s not", - USBD_DEVICE_REQUESTS (request->bRequest)); - default: - return -1; - - case USB_REQ_RECIPIENT_ENDPOINT: - dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue)); - if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) { - /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */ - /* request->bRequest == USB_REQ_SET_FEATURE); */ - /* NEED TO IMPLEMENT THIS!!! */ - return -1; - } else { - dbg_ep0 (1, "request %s bad wValue: %04x", - USBD_DEVICE_REQUESTS - (request->bRequest), - le16_to_cpu (request->wValue)); - return -1; - } - } - - case USB_REQ_SET_ADDRESS: - /* check if this is a re-address, reset first if it is (this shouldn't be possible) */ - if (device->device_state != STATE_DEFAULT) { - dbg_ep0 (1, "set_address: %02x state: %s", - le16_to_cpu (request->wValue), - usbd_device_states[device->device_state]); - return -1; - } - address = le16_to_cpu (request->wValue); - if ((address & 0x7f) != address) { - dbg_ep0 (1, "invalid address %04x %04x", - address, address & 0x7f); - return -1; - } - device->address = address; - - /*dbg_ep0(2, "address: %d %d %d", */ - /* request->wValue, le16_to_cpu(request->wValue), device->address); */ - - return 0; - - case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */ - dbg_ep0 (0, "set descriptor: NOT SUPPORTED"); - return -1; - - case USB_REQ_SET_CONFIGURATION: - /* c.f. 9.4.7 - the top half of wValue is reserved */ - /* */ - if ((device->configuration = - le16_to_cpu (request->wValue) & 0xFF80) != 0) { - /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */ - /* is the same is configuration zero */ - serial_printf("error setting dev->config to zero!\n"); - device->configuration = 0; /* TBR - ?????? */ - } - /* reset interface and alternate settings */ - device->interface = device->alternate = 0; - - /*dbg_ep0(2, "set configuration: %d", device->configuration); */ - /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */ - return 0; - - case USB_REQ_SET_INTERFACE: - device->interface = le16_to_cpu (request->wIndex); - device->alternate = le16_to_cpu (request->wValue); - /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */ - serial_printf ("DEVICE_SET_INTERFACE.. event?\n"); - return 0; - - case USB_REQ_GET_STATUS: - case USB_REQ_GET_DESCRIPTOR: - case USB_REQ_GET_CONFIGURATION: - case USB_REQ_GET_INTERFACE: - case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */ - return -1; - } - } - return -1; -} - -#endif diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c deleted file mode 100644 index d4c4096565..0000000000 --- a/drivers/usbdcore_mpc8xx.c +++ /dev/null @@ -1,1401 +0,0 @@ -/* - * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit - * bodonoghue@CodeHermit.ie - * - * References - * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -/* - * Notes : - * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX - * packet to force the USB re-transmit protocol. - * - * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console - * be careful that tracing doesn't create Hiesen-bugs with respect to - * response timeouts to control requests. - * - * 3. This driver should be able to support any higher level driver that - * that wants to do either of the two standard UDC implementations - * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence - * gserial and cdc_acm should work with this code. - * - * 4. NAK events never actually get raised at all, the documentation - * is just wrong ! - * - * 5. For some reason, cbd_datlen is *always* +2 the value it should be. - * this means that having an RX cbd of 16 bytes is not possible, since - * the same size is reported for 14 bytes received as 16 bytes received - * until we can find out why this happens, RX cbds must be limited to 8 - * bytes. TODO: check errata for this behaviour. - * - * 6. Right now this code doesn't support properly powering up with the USB - * cable attached to the USB host my development board the Adder87x doesn't - * have a pull-up fitted to allow this, so it is necessary to power the - * board and *then* attached the USB cable to the host. However somebody - * with a different design in their board may be able to keep the cable - * constantly connected and simply enable/disable a pull-up re - * figure 31.1 in MPC885RM.pdf instead of having to power up the board and - * then attach the cable ! - * - */ -#include -#include - -#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE) -#include -#include "usbdcore.h" -#include "usbdcore_mpc8xx.h" -#include "usbdcore_ep0.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define ERR(fmt, args...)\ - serial_printf("ERROR : [%s] %s:%d: "fmt,\ - __FILE__,__FUNCTION__,__LINE__, ##args) -#ifdef __DEBUG_UDC__ -#define DBG(fmt,args...)\ - serial_printf("[%s] %s:%d: "fmt,\ - __FILE__,__FUNCTION__,__LINE__, ##args) -#else -#define DBG(fmt,args...) -#endif - -/* Static Data */ -#ifdef __SIMULATE_ERROR__ -static char err_poison_test = 0; -#endif -static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS]; -static u32 address_base = STATE_NOT_READY; -static mpc8xx_udc_state_t udc_state = 0; -static struct usb_device_instance *udc_device = 0; -static volatile usb_epb_t *endpoints[MAX_ENDPOINTS]; -static volatile cbd_t *tx_cbd[TX_RING_SIZE]; -static volatile cbd_t *rx_cbd[RX_RING_SIZE]; -static volatile immap_t *immr = 0; -static volatile cpm8xx_t *cp = 0; -static volatile usb_pram_t *usb_paramp = 0; -static volatile usb_t *usbp = 0; -static int rx_ct = 0; -static int tx_ct = 0; - -/* Static Function Declarations */ -static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, - usb_device_state_t final); -static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, - usb_device_state_t final); -static void mpc8xx_udc_stall (unsigned int ep); -static void mpc8xx_udc_flush_tx_fifo (int epid); -static void mpc8xx_udc_flush_rx_fifo (void); -static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp); -static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, - struct urb *tx_urb); -static void mpc8xx_udc_dump_request (struct usb_device_request *request); -static void mpc8xx_udc_clock_init (volatile immap_t * immr, - volatile cpm8xx_t * cp); -static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi); -static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp); -static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp); -static void mpc8xx_udc_cbd_init (void); -static void mpc8xx_udc_endpoint_init (void); -static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size); -static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment); -static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp); -static void mpc8xx_udc_set_nak (unsigned int ep); -static short mpc8xx_udc_handle_txerr (void); -static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid); - -/****************************************************************************** - Global Linkage - *****************************************************************************/ - -/* udc_init - * - * Do initial bus gluing - */ -int udc_init (void) -{ - /* Init various pointers */ - immr = (immap_t *) CFG_IMMR; - cp = (cpm8xx_t *) & (immr->im_cpm); - usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]); - usbp = (usb_t *) & (cp->cp_scc[0]); - - memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS)); - - udc_device = 0; - udc_state = STATE_NOT_READY; - - usbp->usmod = 0x00; - usbp->uscom = 0; - - /* Set USB Frame #0, Respond at Address & Get a clock source */ - usbp->usaddr = 0x00; - mpc8xx_udc_clock_init (immr, cp); - - /* PA15, PA14 as perhiperal USBRXD and USBOE */ - immr->im_ioport.iop_padir &= ~0x0003; - immr->im_ioport.iop_papar |= 0x0003; - - /* PC11/PC10 as peripheral USBRXP USBRXN */ - immr->im_ioport.iop_pcso |= 0x0030; - - /* PC7/PC6 as perhiperal USBTXP and USBTXN */ - immr->im_ioport.iop_pcdir |= 0x0300; - immr->im_ioport.iop_pcpar |= 0x0300; - - /* Set the base address */ - address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE); - - /* Initialise endpoints and circular buffers */ - mpc8xx_udc_endpoint_init (); - mpc8xx_udc_cbd_init (); - - /* Assign allocated Dual Port Endpoint descriptors */ - usb_paramp->ep0ptr = (u32) endpoints[0]; - usb_paramp->ep1ptr = (u32) endpoints[1]; - usb_paramp->ep2ptr = (u32) endpoints[2]; - usb_paramp->ep3ptr = (u32) endpoints[3]; - usb_paramp->frame_n = 0; - - DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n", - usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr, - usb_paramp->ep3ptr); - - return 0; -} - -/* udc_irq - * - * Poll for whatever events may have occured - */ -void udc_irq (void) -{ - int epid = 0; - volatile cbd_t *rx_cbdp = 0; - volatile cbd_t *rx_cbdp_base = 0; - - if (udc_state != STATE_READY) { - return; - } - - if (usbp->usber & USB_E_BSY) { - /* This shouldn't happen. If it does then it's a bug ! */ - usbp->usber |= USB_E_BSY; - mpc8xx_udc_flush_rx_fifo (); - } - - /* Scan all RX/Bidirectional Endpoints for RX data. */ - for (epid = 0; epid < MAX_ENDPOINTS; epid++) { - if (!ep_ref[epid].prx) { - continue; - } - rx_cbdp = rx_cbdp_base = ep_ref[epid].prx; - - do { - if (!(rx_cbdp->cbd_sc & RX_BD_E)) { - - if (rx_cbdp->cbd_sc & 0x1F) { - /* Corrupt data discard it. - * Controller has NAK'd this packet. - */ - mpc8xx_udc_clear_rxbd (rx_cbdp); - - } else { - if (!epid) { - mpc8xx_udc_ep0_rx (rx_cbdp); - - } else { - /* Process data */ - mpc8xx_udc_set_nak (epid); - mpc8xx_udc_epn_rx (epid, rx_cbdp); - mpc8xx_udc_clear_rxbd (rx_cbdp); - } - } - - /* Advance RX CBD pointer */ - mpc8xx_udc_advance_rx (&rx_cbdp, epid); - ep_ref[epid].prx = rx_cbdp; - } else { - /* Advance RX CBD pointer */ - mpc8xx_udc_advance_rx (&rx_cbdp, epid); - } - - } while (rx_cbdp != rx_cbdp_base); - } - - /* Handle TX events as appropiate, the correct place to do this is - * in a tx routine. Perhaps TX on epn was pre-empted by ep0 - */ - - if (usbp->usber & USB_E_TXB) { - usbp->usber |= USB_E_TXB; - } - - if (usbp->usber & (USB_TX_ERRMASK)) { - mpc8xx_udc_handle_txerr (); - } - - /* Switch to the default state, respond at the default address */ - if (usbp->usber & USB_E_RESET) { - usbp->usber |= USB_E_RESET; - usbp->usaddr = 0x00; - udc_device->device_state = STATE_DEFAULT; - } - - /* if(usbp->usber&USB_E_IDLE){ - We could suspend here ! - usbp->usber|=USB_E_IDLE; - DBG("idle state change\n"); - } - if(usbp->usbs){ - We could resume here when IDLE is deasserted ! - Not worth doing, so long as we are self powered though. - } - */ - - return; -} - -/* udc_endpoint_write - * - * Write some data to an endpoint - */ -int udc_endpoint_write (struct usb_endpoint_instance *epi) -{ - int ep = 0; - short epid = 1, unnak = 0, ret = 0; - - if (udc_state != STATE_READY) { - ERR ("invalid udc_state != STATE_READY!\n"); - return -1; - } - - if (!udc_device || !epi) { - return -1; - } - - if (udc_device->device_state != STATE_CONFIGURED) { - return -1; - } - - ep = epi->endpoint_address & 0x03; - if (ep >= MAX_ENDPOINTS) { - return -1; - } - - /* Set NAK for all RX endpoints during TX */ - for (epid = 1; epid < MAX_ENDPOINTS; epid++) { - - /* Don't set NAK on DATA IN/CONTROL endpoints */ - if (ep_ref[epid].sc & USB_DIR_IN) { - continue; - } - - if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) { - unnak |= 1 << epid; - } - - mpc8xx_udc_set_nak (epid); - } - - mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep], - epi->tx_urb); - ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]); - - /* Remove temporary NAK */ - for (epid = 1; epid < MAX_ENDPOINTS; epid++) { - if (unnak & (1 << epid)) { - udc_unset_nak (epid); - } - } - - return ret; -} - -/* mpc8xx_udc_assign_urb - * - * Associate a given urb to an endpoint TX or RX transmit/receive buffers - */ -static int mpc8xx_udc_assign_urb (int ep, char direction) -{ - struct usb_endpoint_instance *epi = 0; - - if (ep >= MAX_ENDPOINTS) { - goto err; - } - epi = &udc_device->bus->endpoint_array[ep]; - if (!epi) { - goto err; - } - - if (!ep_ref[ep].urb) { - ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array); - if (!ep_ref[ep].urb) { - goto err; - } - } else { - ep_ref[ep].urb->actual_length = 0; - } - - switch (direction) { - case USB_DIR_IN: - epi->tx_urb = ep_ref[ep].urb; - break; - case USB_DIR_OUT: - epi->rcv_urb = ep_ref[ep].urb; - break; - default: - goto err; - } - return 0; - - err: - udc_state = STATE_ERROR; - return -1; -} - -/* udc_setup_ep - * - * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram - * Isochronous endpoints aren't yet supported! - */ -void udc_setup_ep (struct usb_device_instance *device, unsigned int ep, - struct usb_endpoint_instance *epi) -{ - uchar direction = 0; - int ep_attrib = 0; - - if (epi && (ep < MAX_ENDPOINTS)) { - - if (ep == 0) { - if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL - || epi->tx_attributes != - USB_ENDPOINT_XFER_CONTROL) { - - /* ep0 must be a control endpoint */ - udc_state = STATE_ERROR; - return; - - } - if (!(ep_ref[ep].sc & EP_ATTACHED)) { - mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize, - epi->rcv_packetSize); - } - usbp->usep[ep] = 0x0000; - return; - } - - if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) { - - direction = 1; - ep_attrib = epi->tx_attributes; - epi->rcv_packetSize = 0; - ep_ref[ep].sc |= USB_DIR_IN; - } else { - - direction = 0; - ep_attrib = epi->rcv_attributes; - epi->tx_packetSize = 0; - ep_ref[ep].sc &= ~USB_DIR_IN; - } - - if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address - & USB_ENDPOINT_DIR_MASK)) { - return; - } - - switch (ep_attrib) { - case USB_ENDPOINT_XFER_CONTROL: - if (!(ep_ref[ep].sc & EP_ATTACHED)) { - mpc8xx_udc_cbd_attach (ep, - epi->tx_packetSize, - epi->rcv_packetSize); - } - usbp->usep[ep] = ep << 12; - epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb; - - break; - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - if (!(ep_ref[ep].sc & EP_ATTACHED)) { - if (direction) { - mpc8xx_udc_cbd_attach (ep, - epi->tx_packetSize, - 0); - } else { - mpc8xx_udc_cbd_attach (ep, - 0, - epi->rcv_packetSize); - } - } - usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8); - - break; - case USB_ENDPOINT_XFER_ISOC: - default: - serial_printf ("Error endpoint attrib %d>3\n", ep_attrib); - udc_state = STATE_ERROR; - break; - } - } - -} - -/* udc_connect - * - * Move state, switch on the USB - */ -void udc_connect (void) -{ - /* Enable pull-up resistor on D+ - * TODO: fit a pull-up resistor to drive SE0 for > 2.5us - */ - - if (udc_state != STATE_ERROR) { - udc_state = STATE_READY; - usbp->usmod |= USMOD_EN; - } -} - -/* udc_disconnect - * - * Disconnect is not used but, is included for completeness - */ -void udc_disconnect (void) -{ - /* Disable pull-up resistor on D- - * TODO: fix a pullup resistor to control this - */ - - if (udc_state != STATE_ERROR) { - udc_state = STATE_NOT_READY; - } - usbp->usmod &= ~USMOD_EN; -} - -/* udc_enable - * - * Grab an EP0 URB, register interest in a subset of USB events - */ -void udc_enable (struct usb_device_instance *device) -{ - if (udc_state == STATE_ERROR) { - return; - } - - udc_device = device; - - if (!ep_ref[0].urb) { - ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array); - } - - /* Register interest in all events except SOF, enable transceiver */ - usbp->usber = 0x03FF; - usbp->usbmr = 0x02F7; - - return; -} - -/* udc_disable - * - * disable the currently hooked device - */ -void udc_disable (void) -{ - int i = 0; - - if (udc_state == STATE_ERROR) { - DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n"); - return; - } - - udc_device = 0; - - for (; i < MAX_ENDPOINTS; i++) { - if (ep_ref[i].urb) { - usbd_dealloc_urb (ep_ref[i].urb); - ep_ref[i].urb = 0; - } - } - - usbp->usbmr = 0x00; - usbp->usmod = ~USMOD_EN; - udc_state = STATE_NOT_READY; -} - -/* udc_startup_events - * - * Enable the specified device - */ -void udc_startup_events (struct usb_device_instance *device) -{ - udc_enable (device); - if (udc_state == STATE_READY) { - usbd_device_event_irq (device, DEVICE_CREATE, 0); - } -} - -/* udc_set_nak - * - * Allow upper layers to signal lower layers should not accept more RX data - * - */ -void udc_set_nak (int epid) -{ - if (epid) { - mpc8xx_udc_set_nak (epid); - } -} - -/* udc_unset_nak - * - * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint. - * Switch off NAKing on this endpoint to accept more data output from host. - * - */ -void udc_unset_nak (int epid) -{ - if (epid > MAX_ENDPOINTS) { - return; - } - - if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) { - usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK); - __asm__ ("eieio"); - } -} - -/****************************************************************************** - Static Linkage -******************************************************************************/ - -/* udc_state_transition_up - * udc_state_transition_down - * - * Helper functions to implement device state changes. The device states and - * the events that transition between them are: - * - * STATE_ATTACHED - * || /\ - * \/ || - * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET - * || /\ - * \/ || - * STATE_POWERED - * || /\ - * \/ || - * DEVICE_RESET DEVICE_POWER_INTERRUPTION - * || /\ - * \/ || - * STATE_DEFAULT - * || /\ - * \/ || - * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET - * || /\ - * \/ || - * STATE_ADDRESSED - * || /\ - * \/ || - * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED - * || /\ - * \/ || - * STATE_CONFIGURED - * - * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED - * to STATE_CONFIGURED) from the specified initial state to the specified final - * state, passing through each intermediate state on the way. If the initial - * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then - * no state transitions will take place. - * - * udc_state_transition_down transitions down (in the direction from - * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the - * specified final state, passing through each intermediate state on the way. - * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final - * state, then no state transitions will take place. - * - */ - -static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial < final) { - switch (initial) { - case STATE_ATTACHED: - usbd_device_event_irq (udc_device, - DEVICE_HUB_CONFIGURED, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq (udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq (udc_device, - DEVICE_ADDRESS_ASSIGNED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, - 0); - case STATE_CONFIGURED: - break; - default: - break; - } - } -} - -static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial > final) { - switch (initial) { - case STATE_CONFIGURED: - usbd_device_event_irq (udc_device, - DEVICE_DE_CONFIGURED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq (udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq (udc_device, - DEVICE_POWER_INTERRUPTION, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, - 0); - case STATE_ATTACHED: - break; - default: - break; - } - } -} - -/* mpc8xx_udc_stall - * - * Force returning of STALL tokens on the given endpoint. Protocol or function - * STALL conditions are permissable here - */ -static void mpc8xx_udc_stall (unsigned int ep) -{ - usbp->usep[ep] |= STALL_BITMASK; -} - -/* mpc8xx_udc_set_nak - * - * Force returning of NAK responses for the given endpoint as a kind of very - * simple flow control - */ -static void mpc8xx_udc_set_nak (unsigned int ep) -{ - usbp->usep[ep] |= NAK_BITMASK; - __asm__ ("eieio"); -} - -/* mpc8xx_udc_handle_txerr - * - * Handle errors relevant to TX. Return a status code to allow calling - * indicative of what if anything happened - */ -static short mpc8xx_udc_handle_txerr () -{ - short ep = 0, ret = 0; - - for (; ep < TX_RING_SIZE; ep++) { - if (usbp->usber & (0x10 << ep)) { - - /* Timeout or underrun */ - if (tx_cbd[ep]->cbd_sc & 0x06) { - ret = 1; - mpc8xx_udc_flush_tx_fifo (ep); - - } else { - if (usbp->usep[ep] & STALL_BITMASK) { - if (!ep) { - usbp->usep[ep] &= ~STALL_BITMASK; - } - } /* else NAK */ - } - usbp->usber |= (0x10 << ep); - } - } - return ret; -} - -/* mpc8xx_udc_advance_rx - * - * Advance cbd rx - */ -static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid) -{ - if ((*rx_cbdp)->cbd_sc & RX_BD_W) { - *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR); - - } else { - (*rx_cbdp)++; - } -} - - -/* mpc8xx_udc_flush_tx_fifo - * - * Flush a given TX fifo. Assumes one tx cbd per endpoint - */ -static void mpc8xx_udc_flush_tx_fifo (int epid) -{ - volatile cbd_t *tx_cbdp = 0; - - if (epid > MAX_ENDPOINTS) { - return; - } - - /* TX stop */ - immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01); - __asm__ ("eieio"); - while (immr->im_cpm.cp_cpcr & 0x01); - - usbp->uscom = 0x40 | 0; - - /* reset ring */ - tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR); - tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W); - - - endpoints[epid]->tptr = endpoints[epid]->tbase; - endpoints[epid]->tstate = 0x00; - endpoints[epid]->tbcnt = 0x00; - - /* TX start */ - immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01); - __asm__ ("eieio"); - while (immr->im_cpm.cp_cpcr & 0x01); - - return; -} - -/* mpc8xx_udc_flush_rx_fifo - * - * For the sake of completeness of the namespace, it seems like - * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo(); - * If RX_BD_E is true => a driver bug either here or in an upper layer - * not polling frequently enough. If RX_BD_E is true we have told the host - * we have accepted data but, the CPM found it had no-where to put that data - * which needless to say would be a bad thing. - */ -static void mpc8xx_udc_flush_rx_fifo () -{ - int i = 0; - - for (i = 0; i < RX_RING_SIZE; i++) { - if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { - ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n", - rx_cbd[i], rx_cbd[i]->cbd_datlen, - rx_cbd[i]->cbd_sc); - - } - } - ERR ("BUG : Input over-run\n"); -} - -/* mpc8xx_udc_clear_rxbd - * - * Release control of RX CBD to CP. - */ -static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp) -{ - rx_cbdp->cbd_datlen = 0x0000; - rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I)); - __asm__ ("eieio"); -} - -/* mpc8xx_udc_tx_irq - * - * Parse for tx timeout, control RX or USB reset/busy conditions - * Return -1 on timeout, -2 on fatal error, else return zero - */ -static int mpc8xx_udc_tx_irq (int ep) -{ - int i = 0; - - if (usbp->usber & (USB_TX_ERRMASK)) { - if (mpc8xx_udc_handle_txerr ()) { - /* Timeout, controlling function must retry send */ - return -1; - } - } - - if (usbp->usber & (USB_E_RESET | USB_E_BSY)) { - /* Fatal, abandon TX transaction */ - return -2; - } - - if (usbp->usber & USB_E_RXB) { - for (i = 0; i < RX_RING_SIZE; i++) { - if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { - if ((rx_cbd[i] == ep_ref[0].prx) || ep) { - return -2; - } - } - } - } - - return 0; -} - -/* mpc8xx_udc_ep_tx - * - * Transmit in a re-entrant fashion outbound USB packets. - * Implement retry/timeout mechanism described in USB specification - * Toggle DATA0/DATA1 pids as necessary - * Introduces non-standard tx_retry. The USB standard has no scope for slave - * devices to give up TX, however tx_retry stops us getting stuck in an endless - * TX loop. - */ -static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) -{ - struct urb *urb = epi->tx_urb; - volatile cbd_t *tx_cbdp = 0; - unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0; - int ret = 0; - - if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) { - return -1; - } - - ep = epi->endpoint_address & 0x03; - tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR); - - if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) { - mpc8xx_udc_flush_tx_fifo (ep); - usbp->usber |= USB_E_TXB; - }; - - while (tx_retry++ < 100) { - ret = mpc8xx_udc_tx_irq (ep); - if (ret == -1) { - /* ignore timeout here */ - } else if (ret == -2) { - /* Abandon TX */ - mpc8xx_udc_flush_tx_fifo (ep); - return -1; - } - - tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR); - while (tx_cbdp->cbd_sc & TX_BD_R) { - }; - tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W); - - pkt_len = urb->actual_length - epi->sent; - - if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { - pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); - } - - for (x = 0; x < pkt_len; x++) { - *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) = - urb->buffer[epi->sent + x]; - } - tx_cbdp->cbd_datlen = pkt_len; - tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid); - __asm__ ("eieio"); - -#ifdef __SIMULATE_ERROR__ - if (++err_poison_test == 2) { - err_poison_test = 0; - tx_cbdp->cbd_sc &= ~TX_BD_TC; - } -#endif - - usbp->uscom = (USCOM_STR | ep); - - while (!(usbp->usber & USB_E_TXB)) { - ret = mpc8xx_udc_tx_irq (ep); - if (ret == -1) { - /* TX timeout */ - break; - } else if (ret == -2) { - if (usbp->usber & USB_E_TXB) { - usbp->usber |= USB_E_TXB; - } - mpc8xx_udc_flush_tx_fifo (ep); - return -1; - } - }; - - if (usbp->usber & USB_E_TXB) { - usbp->usber |= USB_E_TXB; - } - - /* ACK must be present <= 18bit times from TX */ - if (ret == -1) { - continue; - } - - /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ - epi->sent += pkt_len; - epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); - TOGGLE_TX_PID (ep_ref[ep].pid); - - if (epi->sent >= epi->tx_urb->actual_length) { - - epi->tx_urb->actual_length = 0; - epi->sent = 0; - - if (ep_ref[ep].sc & EP_SEND_ZLP) { - ep_ref[ep].sc &= ~EP_SEND_ZLP; - } else { - return 0; - } - } - } - - ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent, - epi->tx_urb->actual_length); - - return -1; -} - -/* mpc8xx_udc_dump_request - * - * Dump a control request to console - */ -static void mpc8xx_udc_dump_request (struct usb_device_request *request) -{ - DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x " - "wIndex:%04x wLength:%04x ?\n", - request->bmRequestType, - request->bRequest, - request->wValue, request->wIndex, request->wLength); - - return; -} - -/* mpc8xx_udc_ep0_rx_setup - * - * Decode received ep0 SETUP packet. return non-zero on error - */ -static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp) -{ - unsigned int x = 0; - struct urb *purb = ep_ref[0].urb; - struct usb_endpoint_instance *epi = - &udc_device->bus->endpoint_array[0]; - - for (; x < rx_cbdp->cbd_datlen; x++) { - *(((unsigned char *) &ep_ref[0].urb->device_request) + x) = - *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); - } - - mpc8xx_udc_clear_rxbd (rx_cbdp); - - if (ep0_recv_setup (purb)) { - mpc8xx_udc_dump_request (&purb->device_request); - return -1; - } - - if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) - == USB_REQ_HOST2DEVICE) { - - switch (purb->device_request.bRequest) { - case USB_REQ_SET_ADDRESS: - /* Send the Status OUT ZLP */ - ep_ref[0].pid = TX_BD_PID_DATA1; - purb->actual_length = 0; - mpc8xx_udc_init_tx (epi, purb); - mpc8xx_udc_ep_tx (epi); - - /* Move to the addressed state */ - usbp->usaddr = udc_device->address; - mpc8xx_udc_state_transition_up (udc_device->device_state, - STATE_ADDRESSED); - return 0; - - case USB_REQ_SET_CONFIGURATION: - if (!purb->device_request.wValue) { - /* Respond at default address */ - usbp->usaddr = 0x00; - mpc8xx_udc_state_transition_down (udc_device->device_state, - STATE_ADDRESSED); - } else { - /* TODO: Support multiple configurations */ - mpc8xx_udc_state_transition_up (udc_device->device_state, - STATE_CONFIGURED); - for (x = 1; x < MAX_ENDPOINTS; x++) { - if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) { - ep_ref[x].pid = TX_BD_PID_DATA0; - } else { - ep_ref[x].pid = RX_BD_PID_DATA0; - } - /* Set configuration must unstall endpoints */ - usbp->usep[x] &= ~STALL_BITMASK; - } - } - break; - default: - /* CDC/Vendor specific */ - break; - } - - /* Send ZLP as ACK in Status OUT phase */ - ep_ref[0].pid = TX_BD_PID_DATA1; - purb->actual_length = 0; - mpc8xx_udc_init_tx (epi, purb); - mpc8xx_udc_ep_tx (epi); - - } else { - - if (purb->actual_length) { - ep_ref[0].pid = TX_BD_PID_DATA1; - mpc8xx_udc_init_tx (epi, purb); - - if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) { - ep_ref[0].sc |= EP_SEND_ZLP; - } - - if (purb->device_request.wValue == - USB_DESCRIPTOR_TYPE_DEVICE) { - if (le16_to_cpu (purb->device_request.wLength) - > purb->actual_length) { - /* Send EP0_MAX_PACKET_SIZE bytes - * unless correct size requested. - */ - if (purb->actual_length > epi->tx_packetSize) { - purb->actual_length = epi->tx_packetSize; - } - } - } - mpc8xx_udc_ep_tx (epi); - - } else { - /* Corrupt SETUP packet? */ - ERR ("Zero length data or SETUP with DATA-IN phase ?\n"); - return 1; - } - } - return 0; -} - -/* mpc8xx_udc_init_tx - * - * Setup some basic parameters for a TX transaction - */ -static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, - struct urb *tx_urb) -{ - epi->sent = 0; - epi->last = 0; - epi->tx_urb = tx_urb; -} - -/* mpc8xx_udc_ep0_rx - * - * Receive ep0/control USB data. Parse and possibly send a response. - */ -static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp) -{ - if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) { - - /* Unconditionally accept SETUP packets */ - if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) { - mpc8xx_udc_stall (0); - } - - } else { - - mpc8xx_udc_clear_rxbd (rx_cbdp); - - if ((rx_cbdp->cbd_datlen - 2)) { - /* SETUP with a DATA phase - * outside of SETUP packet. - * Reply with STALL. - */ - mpc8xx_udc_stall (0); - } - } -} - -/* mpc8xx_udc_epn_rx - * - * Receive some data from cbd into USB system urb data abstraction - * Upper layers should NAK if there is insufficient RX data space - */ -static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp) -{ - struct usb_endpoint_instance *epi = 0; - struct urb *urb = 0; - unsigned int x = 0; - - if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) { - return 0; - } - - /* USB 2.0 PDF section 8.6.4 - * Discard data with invalid PID it is a resend. - */ - if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) { - return 1; - } - TOGGLE_RX_PID (ep_ref[epid].pid); - - epi = &udc_device->bus->endpoint_array[epid]; - urb = epi->rcv_urb; - - for (; x < (rx_cbdp->cbd_datlen - 2); x++) { - *((unsigned char *) (urb->buffer + urb->actual_length + x)) = - *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); - } - - if (x) { - usbd_rcv_complete (epi, x, 0); - if (ep_ref[epid].urb->status == RECV_ERROR) { - DBG ("RX error unset NAK\n"); - udc_unset_nak (epid); - } - } - return x; -} - -/* mpc8xx_udc_clock_init - * - * Obtain a clock reference for Full Speed Signaling - */ -static void mpc8xx_udc_clock_init (volatile immap_t * immr, - volatile cpm8xx_t * cp) -{ - -#if defined(CFG_USB_EXTC_CLK) - - /* This has been tested with a 48MHz crystal on CLK6 */ - switch (CFG_USB_EXTC_CLK) { - case 1: - immr->im_ioport.iop_papar |= 0x0100; - immr->im_ioport.iop_padir &= ~0x0100; - cp->cp_sicr |= 0x24; - break; - case 2: - immr->im_ioport.iop_papar |= 0x0200; - immr->im_ioport.iop_padir &= ~0x0200; - cp->cp_sicr |= 0x2D; - break; - case 3: - immr->im_ioport.iop_papar |= 0x0400; - immr->im_ioport.iop_padir &= ~0x0400; - cp->cp_sicr |= 0x36; - break; - case 4: - immr->im_ioport.iop_papar |= 0x0800; - immr->im_ioport.iop_padir &= ~0x0800; - cp->cp_sicr |= 0x3F; - break; - default: - udc_state = STATE_ERROR; - break; - } - -#elif defined(CFG_USB_BRGCLK) - - /* This has been tested with brgclk == 50MHz */ - int divisor = 0; - - if (gd->cpu_clk < 48000000L) { - ERR ("brgclk is too slow for full-speed USB!\n"); - udc_state = STATE_ERROR; - return; - } - - /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz) - * but, can /probably/ live with close-ish alternative rates. - */ - divisor = (gd->cpu_clk / 48000000L) - 1; - cp->cp_sicr &= ~0x0000003F; - - switch (CFG_USB_BRGCLK) { - case 1: - cp->cp_brgc1 |= (divisor | CPM_BRG_EN); - cp->cp_sicr &= ~0x2F; - break; - case 2: - cp->cp_brgc2 |= (divisor | CPM_BRG_EN); - cp->cp_sicr |= 0x00000009; - break; - case 3: - cp->cp_brgc3 |= (divisor | CPM_BRG_EN); - cp->cp_sicr |= 0x00000012; - break; - case 4: - cp->cp_brgc4 = (divisor | CPM_BRG_EN); - cp->cp_sicr |= 0x0000001B; - break; - default: - udc_state = STATE_ERROR; - break; - } - -#else -#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined" -#endif - -} - -/* mpc8xx_udc_cbd_attach - * - * attach a cbd to and endpoint - */ -static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size) -{ - - if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) { - udc_state = STATE_ERROR; - return; - } - - if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT || - (!tx_size && !rx_size)) { - udc_state = STATE_ERROR; - return; - } - - /* Attach CBD to appropiate Parameter RAM Endpoint data structure */ - if (rx_size) { - endpoints[ep]->rbase = (u32) rx_cbd[rx_ct]; - endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; - rx_ct++; - - if (!ep) { - - endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; - rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; - rx_ct++; - - } else { - rx_ct += 2; - endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; - rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; - rx_ct++; - } - - /* Where we expect to RX data on this endpoint */ - ep_ref[ep].prx = rx_cbd[rx_ct - 1]; - } else { - - ep_ref[ep].prx = 0; - endpoints[ep]->rbase = 0; - endpoints[ep]->rbptr = 0; - } - - if (tx_size) { - endpoints[ep]->tbase = (u32) tx_cbd[tx_ct]; - endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct]; - tx_ct++; - } else { - endpoints[ep]->tbase = 0; - endpoints[ep]->tbptr = 0; - } - - endpoints[ep]->tstate = 0; - endpoints[ep]->tbcnt = 0; - endpoints[ep]->mrblr = EP_MAX_PKT; - endpoints[ep]->rfcr = 0x18; - endpoints[ep]->tfcr = 0x18; - ep_ref[ep].sc |= EP_ATTACHED; - - DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n", - ep, endpoints[ep]->rbase, endpoints[ep]->rbptr, - endpoints[ep]->tbase, endpoints[ep]->tbptr, - ep_ref[ep].prx); - - return; -} - -/* mpc8xx_udc_cbd_init - * - * Allocate space for a cbd and allocate TX/RX data space - */ -static void mpc8xx_udc_cbd_init (void) -{ - int i = 0; - - for (; i < TX_RING_SIZE; i++) { - tx_cbd[i] = (cbd_t *) - mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); - } - - for (i = 0; i < RX_RING_SIZE; i++) { - rx_cbd[i] = (cbd_t *) - mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); - } - - for (i = 0; i < TX_RING_SIZE; i++) { - tx_cbd[i]->cbd_bufaddr = - mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); - - tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W); - tx_cbd[i]->cbd_datlen = 0x0000; - } - - - for (i = 0; i < RX_RING_SIZE; i++) { - rx_cbd[i]->cbd_bufaddr = - mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); - rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E); - rx_cbd[i]->cbd_datlen = 0x0000; - - } - - return; -} - -/* mpc8xx_udc_endpoint_init - * - * Attach an endpoint to some dpram - */ -static void mpc8xx_udc_endpoint_init (void) -{ - int i = 0; - - for (; i < MAX_ENDPOINTS; i++) { - endpoints[i] = (usb_epb_t *) - mpc8xx_udc_alloc (sizeof (usb_epb_t), 32); - } -} - -/* mpc8xx_udc_alloc - * - * Grab the address of some dpram - */ -static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment) -{ - u32 retaddr = address_base; - - while (retaddr % alignment) { - retaddr++; - } - address_base += data_size; - - return retaddr; -} - -#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */ diff --git a/drivers/usbdcore_omap1510.c b/drivers/usbdcore_omap1510.c deleted file mode 100644 index 84bb936d86..0000000000 --- a/drivers/usbdcore_omap1510.c +++ /dev/null @@ -1,1547 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * Based on - * linux/drivers/usb/device/bi/omap.c - * TI OMAP1510 USB bus interface driver - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * (C) Copyright 2002 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include - -#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE) - -#include -#ifdef CONFIG_OMAP_SX1 -#include -#endif - -#include "usbdcore.h" -#include "usbdcore_omap1510.h" -#include "usbdcore_ep0.h" - - -#define UDC_INIT_MDELAY 80 /* Device settle delay */ -#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */ - -/* Some kind of debugging output... */ -#if 1 -#define UDCDBG(str) -#define UDCDBGA(fmt,args...) -#else /* The bugs still exists... */ -#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__) -#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args) -#endif - -#if 1 -#define UDCREG(name) -#define UDCREGL(name) -#else /* The bugs still exists... */ -#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */ -#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */ -#endif - - -static struct urb *ep0_urb = NULL; - -static struct usb_device_instance *udc_device; /* Used in interrupt handler */ -static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */ -static u32 udc_interrupts = 0; - -static void udc_stall_ep (unsigned int ep_addr); - - -static struct usb_endpoint_instance *omap1510_find_ep (int ep) -{ - int i; - - for (i = 0; i < udc_device->bus->max_endpoints; i++) { - if (udc_device->bus->endpoint_array[i].endpoint_address == ep) - return &udc_device->bus->endpoint_array[i]; - } - return NULL; -} - -/* ************************************************************************** */ -/* IO - */ - -/* - * omap1510_prepare_endpoint_for_rx - * - * This function implements TRM Figure 14-11. - * - * The endpoint to prepare for transfer is specified as a physical endpoint - * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint - * configuration register is checked to see if the endpoint is ISO or not. - * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled. - * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30. - */ -static void omap1510_prepare_endpoint_for_rx (int ep_addr) -{ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr); - if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { - if ((inw (UDC_EP_RX (ep_num)) & - (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) == - UDC_EPn_RX_Valid) { - /* rx endpoint is valid, non-ISO, so enable its FIFO */ - outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); - outw (UDC_Set_FIFO_En, UDC_CTRL); - outw (0, UDC_EP_NUM); - } - } -} - -/* omap1510_configure_endpoints - * - * This function implements TRM Figure 14-10. - */ -static void omap1510_configure_endpoints (struct usb_device_instance *device) -{ - int ep; - struct usb_bus_instance *bus; - struct usb_endpoint_instance *endpoint; - unsigned short ep_ptr; - unsigned short ep_size; - unsigned short ep_isoc; - unsigned short ep_doublebuffer; - int ep_addr; - int packet_size; - int buffer_size; - int attributes; - - bus = device->bus; - - /* There is a dedicated 2048 byte buffer for USB packets that may be - * arbitrarily partitioned among the endpoints on 8-byte boundaries. - * The first 8 bytes are reserved for receiving setup packets on - * endpoint 0. - */ - ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */ - - for (ep = 0; ep < bus->max_endpoints; ep++) { - endpoint = bus->endpoint_array + ep; - ep_addr = endpoint->endpoint_address; - if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* IN endpoint */ - packet_size = endpoint->tx_packetSize; - attributes = endpoint->tx_attributes; - } else { - /* OUT endpoint */ - packet_size = endpoint->rcv_packetSize; - attributes = endpoint->rcv_attributes; - } - - switch (packet_size) { - case 0: - ep_size = 0; - break; - case 8: - ep_size = 0; - break; - case 16: - ep_size = 1; - break; - case 32: - ep_size = 2; - break; - case 64: - ep_size = 3; - break; - case 128: - ep_size = 4; - break; - case 256: - ep_size = 5; - break; - case 512: - ep_size = 6; - break; - default: - UDCDBGA ("ep 0x%02x has bad packet size %d", - ep_addr, packet_size); - packet_size = 0; - ep_size = 0; - break; - } - - switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - default: - /* A non-isochronous endpoint may optionally be - * double-buffered. For now we disable - * double-buffering. - */ - ep_doublebuffer = 0; - ep_isoc = 0; - if (packet_size > 64) - packet_size = 0; - if (!ep || !ep_doublebuffer) - buffer_size = packet_size; - else - buffer_size = packet_size * 2; - break; - case USB_ENDPOINT_XFER_ISOC: - /* Isochronous endpoints are always double- - * buffered, but the double-buffering bit - * in the endpoint configuration register - * becomes the msb of the endpoint size so we - * set the double-buffering flag to zero. - */ - ep_doublebuffer = 0; - ep_isoc = 1; - buffer_size = packet_size * 2; - break; - } - - /* check to see if our packet buffer RAM is exhausted */ - if ((ep_ptr + buffer_size) > 2048) { - UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size); - buffer_size = packet_size = 0; - } - - /* force a default configuration for endpoint 0 since it is - * always enabled - */ - if (!ep && ((packet_size < 8) || (packet_size > 64))) { - buffer_size = packet_size = 64; - ep_size = 3; - } - - if (!ep) { - /* configure endpoint 0 */ - outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0); - /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */ - /* ep_ptr, packet_size); */ - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* IN endpoint */ - if (packet_size) { - outw ((1 << 15) | (ep_doublebuffer << 14) | - (ep_size << 12) | (ep_isoc << 11) | - (ep_ptr >> 3), - UDC_EP_TX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - UDCDBGA ("IN ep %d buffer offset 0x%03x" - " packet size 0x%03x", - ep_addr & USB_ENDPOINT_NUMBER_MASK, - ep_ptr, packet_size); - } else { - outw (0, - UDC_EP_TX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - } - } else { - /* OUT endpoint */ - if (packet_size) { - outw ((1 << 15) | (ep_doublebuffer << 14) | - (ep_size << 12) | (ep_isoc << 11) | - (ep_ptr >> 3), - UDC_EP_RX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - UDCDBGA ("OUT ep %d buffer offset 0x%03x" - " packet size 0x%03x", - ep_addr & USB_ENDPOINT_NUMBER_MASK, - ep_ptr, packet_size); - } else { - outw (0, - UDC_EP_RX (ep_addr & - USB_ENDPOINT_NUMBER_MASK)); - } - } - ep_ptr += buffer_size; - } -} - -/* omap1510_deconfigure_device - * - * This function balances omap1510_configure_device. - */ -static void omap1510_deconfigure_device (void) -{ - int epnum; - - UDCDBG ("clear Cfg_Lock"); - outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1); - UDCREG (UDC_SYSCON1); - - /* deconfigure all endpoints */ - for (epnum = 1; epnum <= 15; epnum++) { - outw (0, UDC_EP_RX (epnum)); - outw (0, UDC_EP_TX (epnum)); - } -} - -/* omap1510_configure_device - * - * This function implements TRM Figure 14-9. - */ -static void omap1510_configure_device (struct usb_device_instance *device) -{ - omap1510_configure_endpoints (device); - - - /* Figure 14-9 indicates we should enable interrupts here, but we have - * other routines (udc_all_interrupts, udc_suspended_interrupts) to - * do that. - */ - - UDCDBG ("set Cfg_Lock"); - outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1); - UDCREG (UDC_SYSCON1); -} - -/* omap1510_write_noniso_tx_fifo - * - * This function implements TRM Figure 14-30. - * - * If the endpoint has an active tx_urb, then the next packet of data from the - * URB is written to the tx FIFO. The total amount of data in the urb is given - * by urb->actual_length. The maximum amount of data that can be sent in any - * one packet is given by endpoint->tx_packetSize. The number of data bytes - * from this URB that have already been transmitted is given by endpoint->sent. - * endpoint->last is updated by this routine with the number of data bytes - * transmitted in this packet. - * - * In accordance with Figure 14-30, the EP_NUM register must already have been - * written with the value to select the appropriate tx FIFO before this routine - * is called. - */ -static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance - *endpoint) -{ - struct urb *urb = endpoint->tx_urb; - - if (urb) { - unsigned int last, i; - - UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d", - urb->buffer, urb->buffer_length, urb->actual_length); - if ((last = - MIN (urb->actual_length - endpoint->sent, - endpoint->tx_packetSize))) { - u8 *cp = urb->buffer + endpoint->sent; - - UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); - - if (((u32) cp & 1) == 0) { /* word aligned? */ - outsw (UDC_DATA, cp, last >> 1); - } else { /* byte aligned. */ - for (i = 0; i < (last >> 1); i++) { - u16 w = ((u16) cp[2 * i + 1] << 8) | - (u16) cp[2 * i]; - outw (w, UDC_DATA); - } - } - if (last & 1) { - outb (*(cp + last - 1), UDC_DATA); - } - } - endpoint->last = last; - } -} - -/* omap1510_read_noniso_rx_fifo - * - * This function implements TRM Figure 14-28. - * - * If the endpoint has an active rcv_urb, then the next packet of data is read - * from the rcv FIFO and written to rcv_urb->buffer at offset - * rcv_urb->actual_length to append the packet data to the data from any - * previous packets for this transfer. We assume that there is sufficient room - * left in the buffer to hold an entire packet of data. - * - * The return value is the number of bytes read from the FIFO for this packet. - * - * In accordance with Figure 14-28, the EP_NUM register must already have been - * written with the value to select the appropriate rcv FIFO before this routine - * is called. - */ -static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance - *endpoint) -{ - struct urb *urb = endpoint->rcv_urb; - int len = 0; - - if (urb) { - len = inw (UDC_RXFSTAT); - - if (len) { - unsigned char *cp = urb->buffer + urb->actual_length; - - insw (UDC_DATA, cp, len >> 1); - if (len & 1) - *(cp + len - 1) = inb (UDC_DATA); - } - } - return len; -} - -/* omap1510_prepare_for_control_write_status - * - * This function implements TRM Figure 14-17. - * - * We have to deal here with non-autodecoded control writes that haven't already - * been dealt with by ep0_recv_setup. The non-autodecoded standard control - * write requests are: set/clear endpoint feature, set configuration, set - * interface, and set descriptor. ep0_recv_setup handles set/clear requests for - * ENDPOINT_HALT by halting the endpoint for a set request and resetting the - * endpoint for a clear request. ep0_recv_setup returns an error for - * SET_DESCRIPTOR requests which causes them to be terminated with a stall by - * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by - * generating a DEVICE_SET_INTERFACE event. This leaves only the - * SET_CONFIGURATION event for us to deal with here. - * - */ -static void omap1510_prepare_for_control_write_status (struct urb *urb) -{ - struct usb_device_request *request = &urb->device_request;; - - /* check for a SET_CONFIGURATION request */ - if (request->bRequest == USB_REQ_SET_CONFIGURATION) { - int configuration = le16_to_cpu (request->wValue) & 0xff; - unsigned short devstat = inw (UDC_DEVSTAT); - - if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) { - /* device is currently in ADDRESSED state */ - if (configuration) { - /* Assume the specified non-zero configuration - * value is valid and switch to the CONFIGURED - * state. - */ - outw (UDC_Dev_Cfg, UDC_SYSCON2); - } - } else if ((devstat & UDC_CFG) == UDC_CFG) { - /* device is currently in CONFIGURED state */ - if (!configuration) { - /* Switch to ADDRESSED state. */ - outw (UDC_Clr_Cfg, UDC_SYSCON2); - } - } - } - - /* select EP0 tx FIFO */ - outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - /* clear endpoint (no data bytes in status stage) */ - outw (UDC_Clr_EP, UDC_CTRL); - /* enable the EP0 tx FIFO */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the endpoint */ - outw (UDC_EP_Dir, UDC_EP_NUM); -} - -/* udc_state_transition_up - * udc_state_transition_down - * - * Helper functions to implement device state changes. The device states and - * the events that transition between them are: - * - * STATE_ATTACHED - * || /\ - * \/ || - * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET - * || /\ - * \/ || - * STATE_POWERED - * || /\ - * \/ || - * DEVICE_RESET DEVICE_POWER_INTERRUPTION - * || /\ - * \/ || - * STATE_DEFAULT - * || /\ - * \/ || - * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET - * || /\ - * \/ || - * STATE_ADDRESSED - * || /\ - * \/ || - * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED - * || /\ - * \/ || - * STATE_CONFIGURED - * - * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED - * to STATE_CONFIGURED) from the specified initial state to the specified final - * state, passing through each intermediate state on the way. If the initial - * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then - * no state transitions will take place. - * - * udc_state_transition_down transitions down (in the direction from - * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the - * specified final state, passing through each intermediate state on the way. - * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final - * state, then no state transitions will take place. - * - * These functions must only be called with interrupts disabled. - */ -static void udc_state_transition_up (usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial < final) { - switch (initial) { - case STATE_ATTACHED: - usbd_device_event_irq (udc_device, - DEVICE_HUB_CONFIGURED, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq (udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq (udc_device, - DEVICE_ADDRESS_ASSIGNED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, - 0); - case STATE_CONFIGURED: - break; - default: - break; - } - } -} - -static void udc_state_transition_down (usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial > final) { - switch (initial) { - case STATE_CONFIGURED: - usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq (udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0); - case STATE_ATTACHED: - break; - default: - break; - } - } -} - -/* Handle all device state changes. - * This function implements TRM Figure 14-21. - */ -static void omap1510_udc_state_changed (void) -{ - u16 bits; - u16 devstat = inw (UDC_DEVSTAT); - - UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat); - - bits = devstat ^ udc_devstat; - if (bits) { - if (bits & UDC_ATT) { - if (devstat & UDC_ATT) { - UDCDBG ("device attached and powered"); - udc_state_transition_up (udc_device->device_state, STATE_POWERED); - } else { - UDCDBG ("device detached or unpowered"); - udc_state_transition_down (udc_device->device_state, STATE_ATTACHED); - } - } - if (bits & UDC_USB_Reset) { - if (devstat & UDC_USB_Reset) { - UDCDBG ("device reset in progess"); - udc_state_transition_down (udc_device->device_state, STATE_POWERED); - } else { - UDCDBG ("device reset completed"); - } - } - if (bits & UDC_DEF) { - if (devstat & UDC_DEF) { - UDCDBG ("device entering default state"); - udc_state_transition_up (udc_device->device_state, STATE_DEFAULT); - } else { - UDCDBG ("device leaving default state"); - udc_state_transition_down (udc_device->device_state, STATE_POWERED); - } - } - if (bits & UDC_SUS) { - if (devstat & UDC_SUS) { - UDCDBG ("entering suspended state"); - usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0); - } else { - UDCDBG ("leaving suspended state"); - usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0); - } - } - if (bits & UDC_R_WK_OK) { - UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK) - ? "enabled" : "disabled"); - } - if (bits & UDC_ADD) { - if (devstat & UDC_ADD) { - UDCDBG ("default -> addressed"); - udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED); - } else { - UDCDBG ("addressed -> default"); - udc_state_transition_down (udc_device->device_state, STATE_DEFAULT); - } - } - if (bits & UDC_CFG) { - if (devstat & UDC_CFG) { - UDCDBG ("device configured"); - /* The ep0_recv_setup function generates the - * DEVICE_CONFIGURED event when a - * USB_REQ_SET_CONFIGURATION setup packet is - * received, so we should already be in the - * state STATE_CONFIGURED. - */ - udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED); - } else { - UDCDBG ("device deconfigured"); - udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED); - } - } - } - - /* Clear interrupt source */ - outw (UDC_DS_Chg, UDC_IRQ_SRC); - - /* Save current DEVSTAT */ - udc_devstat = devstat; -} - -/* Handle SETUP USB interrupt. - * This function implements TRM Figure 14-14. - */ -static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint) -{ - UDCDBG ("-> Entering device setup"); - - do { - const int setup_pktsize = 8; - unsigned char *datap = - (unsigned char *) &ep0_urb->device_request; - - /* Gain access to EP 0 setup FIFO */ - outw (UDC_Setup_Sel, UDC_EP_NUM); - - /* Read control request data */ - insb (UDC_DATA, datap, setup_pktsize); - - UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]", - *(datap + 0), *(datap + 1), *(datap + 2), - *(datap + 3), *(datap + 4), *(datap + 5), - *(datap + 6), *(datap + 7)); - - /* Reset EP0 setup FIFO */ - outw (0, UDC_EP_NUM); - } while (inw (UDC_IRQ_SRC) & UDC_Setup); - - /* Try to process setup packet */ - if (ep0_recv_setup (ep0_urb)) { - /* Not a setup packet, stall next EP0 transaction */ - udc_stall_ep (0); - UDCDBG ("can't parse setup packet, still waiting for setup"); - return; - } - - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) - == USB_REQ_HOST2DEVICE) { - UDCDBG ("control write on EP0"); - if (le16_to_cpu (ep0_urb->device_request.wLength)) { - /* We don't support control write data stages. - * The only standard control write request with a data - * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't - * support that so we just stall those requests. A - * function driver might support a non-standard - * write request with a data stage, but it isn't - * obvious what we would do with the data if we read it - * so we'll just stall it. It seems like the API isn't - * quite right here. - */ -#if 0 - /* Here is what we would do if we did support control - * write data stages. - */ - ep0_urb->actual_length = 0; - outw (0, UDC_EP_NUM); - /* enable the EP0 rx FIFO */ - outw (UDC_Set_FIFO_En, UDC_CTRL); -#else - /* Stall this request */ - UDCDBG ("Stalling unsupported EP0 control write data " - "stage."); - udc_stall_ep (0); -#endif - } else { - omap1510_prepare_for_control_write_status (ep0_urb); - } - } else { - UDCDBG ("control read on EP0"); - /* The ep0_recv_setup function has already placed our response - * packet data in ep0_urb->buffer and the packet length in - * ep0_urb->actual_length. - */ - endpoint->tx_urb = ep0_urb; - endpoint->sent = 0; - /* select the EP0 tx FIFO */ - outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo - * will update endpoint->last with the number of bytes written - * to the FIFO. - */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable the FIFO to start the packet transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the EP0 tx FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } - - UDCDBG ("<- Leaving device setup"); -} - -/* Handle endpoint 0 RX interrupt - * This routine implements TRM Figure 14-16. - */ -static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint) -{ - unsigned short status; - - UDCDBG ("RX on EP0"); - /* select EP0 rx FIFO */ - outw (UDC_EP_Sel, UDC_EP_NUM); - - status = inw (UDC_STAT_FLG); - - if (status & UDC_ACK) { - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType - & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { - /* This rx interrupt must be for a control write data - * stage packet. - * - * We don't support control write data stages. - * We should never end up here. - */ - - /* clear the EP0 rx FIFO */ - outw (UDC_Clr_EP, UDC_CTRL); - - /* deselect the EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - - UDCDBG ("Stalling unexpected EP0 control write " - "data stage packet"); - udc_stall_ep (0); - } else { - /* This rx interrupt must be for a control read status - * stage packet. - */ - UDCDBG ("ACK on EP0 control read status stage packet"); - /* deselect EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - } - } else if (status & UDC_STALL) { - UDCDBG ("EP0 stall during RX"); - /* deselect EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - } else { - /* deselect EP0 rx FIFO */ - outw (0, UDC_EP_NUM); - } -} - -/* Handle endpoint 0 TX interrupt - * This routine implements TRM Figure 14-18. - */ -static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint) -{ - unsigned short status; - struct usb_device_request *request = &ep0_urb->device_request; - - UDCDBG ("TX on EP0"); - /* select EP0 TX FIFO */ - outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - - status = inw (UDC_STAT_FLG); - if (status & UDC_ACK) { - /* Check direction */ - if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == - USB_REQ_HOST2DEVICE) { - /* This tx interrupt must be for a control write status - * stage packet. - */ - UDCDBG ("ACK on EP0 control write status stage packet"); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } else { - /* This tx interrupt must be for a control read data - * stage packet. - */ - int wLength = le16_to_cpu (request->wLength); - - /* Update our count of bytes sent so far in this - * transfer. - */ - endpoint->sent += endpoint->last; - - /* We are finished with this transfer if we have sent - * all of the bytes in our tx urb (urb->actual_length) - * unless we need a zero-length terminating packet. We - * need a zero-length terminating packet if we returned - * fewer bytes than were requested (wLength) by the host, - * and the number of bytes we returned is an exact - * multiple of the packet size endpoint->tx_packetSize. - */ - if ((endpoint->sent == ep0_urb->actual_length) - && ((ep0_urb->actual_length == wLength) - || (endpoint->last != - endpoint->tx_packetSize))) { - /* Done with control read data stage. */ - UDCDBG ("control read data stage complete"); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - /* select EP0 RX FIFO to prepare for control - * read status stage. - */ - outw (UDC_EP_Sel, UDC_EP_NUM); - /* clear the EP0 RX FIFO */ - outw (UDC_Clr_EP, UDC_CTRL); - /* enable the EP0 RX FIFO */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the EP0 RX FIFO */ - outw (0, UDC_EP_NUM); - } else { - /* We still have another packet of data to send - * in this control read data stage or else we - * need a zero-length terminating packet. - */ - UDCDBG ("ACK control read data stage packet"); - omap1510_write_noniso_tx_fifo (endpoint); - /* enable the EP0 tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } - } - } else if (status & UDC_STALL) { - UDCDBG ("EP0 stall during TX"); - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } else { - /* deselect EP0 TX FIFO */ - outw (UDC_EP_Dir, UDC_EP_NUM); - } -} - -/* Handle RX transaction on non-ISO endpoint. - * This function implements TRM Figure 14-27. - * The ep argument is a physical endpoint number for a non-ISO OUT endpoint - * in the range 1 to 15. - */ -static void omap1510_udc_epn_rx (int ep) -{ - unsigned short status; - - /* Check endpoint status */ - status = inw (UDC_STAT_FLG); - - if (status & UDC_ACK) { - int nbytes; - struct usb_endpoint_instance *endpoint = - omap1510_find_ep (ep); - - nbytes = omap1510_read_noniso_rx_fifo (endpoint); - usbd_rcv_complete (endpoint, nbytes, 0); - - /* enable rx FIFO to prepare for next packet */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - } else if (status & UDC_STALL) { - UDCDBGA ("STALL on RX endpoint %d", ep); - } else if (status & UDC_NAK) { - UDCDBGA ("NAK on RX ep %d", ep); - } else { - serial_printf ("omap-bi: RX on ep %d with status %x", ep, - status); - } -} - -/* Handle TX transaction on non-ISO endpoint. - * This function implements TRM Figure 14-29. - * The ep argument is a physical endpoint number for a non-ISO IN endpoint - * in the range 16 to 30. - */ -static void omap1510_udc_epn_tx (int ep) -{ - unsigned short status; - - /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */ - - /* Check endpoint status */ - status = inw (UDC_STAT_FLG); - - if (status & UDC_ACK) { - struct usb_endpoint_instance *endpoint = - omap1510_find_ep (ep); - - /* We need to transmit a terminating zero-length packet now if - * we have sent all of the data in this URB and the transfer - * size was an exact multiple of the packet size. - */ - if (endpoint->tx_urb - && (endpoint->last == endpoint->tx_packetSize) - && (endpoint->tx_urb->actual_length - endpoint->sent - - endpoint->last == 0)) { - /* Prepare to transmit a zero-length packet. */ - endpoint->sent += endpoint->last; - /* write 0 bytes of data to FIFO */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - } else if (endpoint->tx_urb - && endpoint->tx_urb->actual_length) { - /* retire the data that was just sent */ - usbd_tx_complete (endpoint); - /* Check to see if we have more data ready to transmit - * now. - */ - if (endpoint->tx_urb - && endpoint->tx_urb->actual_length) { - /* write data to FIFO */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - } - } - } else if (status & UDC_STALL) { - UDCDBGA ("STALL on TX endpoint %d", ep); - } else if (status & UDC_NAK) { - UDCDBGA ("NAK on TX endpoint %d", ep); - } else { - /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */ - } -} - - -/* -------------------------------------------------------------------------------- -*/ - -/* Handle general USB interrupts and dispatch according to type. - * This function implements TRM Figure 14-13. - */ -void omap1510_udc_irq (void) -{ - u16 irq_src = inw (UDC_IRQ_SRC); - int valid_irq = 0; - - if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */ - return; - - UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src); - /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */ - - if (irq_src & UDC_DS_Chg) { - /* Device status changed */ - omap1510_udc_state_changed (); - valid_irq++; - } - if (irq_src & UDC_EP0_RX) { - /* Endpoint 0 receive */ - outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */ - omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0); - valid_irq++; - } - if (irq_src & UDC_EP0_TX) { - /* Endpoint 0 transmit */ - outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */ - omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0); - valid_irq++; - } - if (irq_src & UDC_Setup) { - /* Device setup */ - omap1510_udc_setup (udc_device->bus->endpoint_array + 0); - valid_irq++; - } - /*if (!valid_irq) */ - /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */ - UDCDBGA ("< IRQ #%d end >", udc_interrupts); - udc_interrupts++; -} - -/* This function implements TRM Figure 14-26. */ -void omap1510_udc_noniso_irq (void) -{ - unsigned short epnum; - unsigned short irq_src = inw (UDC_IRQ_SRC); - int valid_irq = 0; - - if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX))) - return; - - UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC)); - - if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */ - /* Determine the endpoint number for this interrupt */ - epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8; - UDCDBGA ("RX on ep %x", epnum); - - /* acknowledge interrupt */ - outw (UDC_EPn_RX, UDC_IRQ_SRC); - - if (epnum) { - /* select the endpoint FIFO */ - outw (UDC_EP_Sel | epnum, UDC_EP_NUM); - - omap1510_udc_epn_rx (epnum); - - /* deselect the endpoint FIFO */ - outw (epnum, UDC_EP_NUM); - } - valid_irq++; - } - if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */ - /* Determine the endpoint number for this interrupt */ - epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN; - UDCDBGA ("TX on ep %x", epnum); - - /* acknowledge interrupt */ - outw (UDC_EPn_TX, UDC_IRQ_SRC); - - if (epnum) { - /* select the endpoint FIFO */ - outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); - - omap1510_udc_epn_tx (epnum); - - /* deselect the endpoint FIFO */ - outw (UDC_EP_Dir | epnum, UDC_EP_NUM); - } - valid_irq++; - } - if (!valid_irq) - serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n", - irq_src); -} - -/* -------------------------------------------------------------------------------- -*/ - - -/* - * Start of public functions. - */ - -/* Called to start packet transmission. */ -void udc_endpoint_write (struct usb_endpoint_instance *endpoint) -{ - unsigned short epnum = - endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("Starting transmit on ep %x", epnum); - - if (endpoint->tx_urb) { - /* select the endpoint FIFO */ - outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM); - /* write data to FIFO */ - omap1510_write_noniso_tx_fifo (endpoint); - /* enable tx FIFO to start transmission */ - outw (UDC_Set_FIFO_En, UDC_CTRL); - /* deselect the endpoint FIFO */ - outw (UDC_EP_Dir | epnum, UDC_EP_NUM); - } -} - -/* Start to initialize h/w stuff */ -int udc_init (void) -{ - u16 udc_rev; - uchar value; - ulong gpio; - int i; - - /* Let the device settle down before we start */ - for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000); - - udc_device = NULL; - - UDCDBG ("starting"); - - /* Check peripheral reset. Must be 1 to make sure - MPU TIPB peripheral reset is inactive */ - UDCREG (ARM_RSTCT2); - - /* Set and check clock control. - * We might ought to be using the clock control API to do - * this instead of fiddling with the clock registers directly - * here. - */ - outw ((1 << 4) | (1 << 5), CLOCK_CTRL); - UDCREG (CLOCK_CTRL); - /* Set and check APLL */ - outw (0x0008, APLL_CTRL); - UDCREG (APLL_CTRL); - /* Set and check DPLL */ - outw (0x2210, DPLL_CTRL); - UDCREG (DPLL_CTRL); - /* Set and check SOFT */ - outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ); - /* Short delay to wait for DPLL */ - udelay (1000); - - /* Print banner with device revision */ - udc_rev = inw (UDC_REV) & 0xff; - printf ("USB: TI OMAP1510 USB function module rev %d.%d\n", - udc_rev >> 4, udc_rev & 0xf); - -#ifdef CONFIG_OMAP_SX1 - i2c_read (0x32, 0x04, 1, &value, 1); - value |= 0x04; - i2c_write (0x32, 0x04, 1, &value, 1); - - i2c_read (0x32, 0x03, 1, &value, 1); - value |= 0x01; - i2c_write (0x32, 0x03, 1, &value, 1); - - gpio = inl(GPIO_PIN_CONTROL_REG); - gpio |= 0x0002; /* A_IRDA_OFF */ - gpio |= 0x0800; /* A_SWITCH */ - gpio |= 0x8000; /* A_USB_ON */ - outl (gpio, GPIO_PIN_CONTROL_REG); - - gpio = inl(GPIO_DIR_CONTROL_REG); - gpio &= ~0x0002; /* A_IRDA_OFF */ - gpio &= ~0x0800; /* A_SWITCH */ - gpio &= ~0x8000; /* A_USB_ON */ - outl (gpio, GPIO_DIR_CONTROL_REG); - - gpio = inl(GPIO_DATA_OUTPUT_REG); - gpio |= 0x0002; /* A_IRDA_OFF */ - gpio &= ~0x0800; /* A_SWITCH */ - gpio &= ~0x8000; /* A_USB_ON */ - outl (gpio, GPIO_DATA_OUTPUT_REG); -#endif - - /* The VBUS_MODE bit selects whether VBUS detection is done via - * software (1) or hardware (0). When software detection is - * selected, VBUS_CTRL selects whether USB is not connected (0) - * or connected (1). - */ - outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); - outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); - UDCREGL (FUNC_MUX_CTRL_0); - - /* - * At this point, device is ready for configuration... - */ - - UDCDBG ("disable USB interrupts"); - outw (0, UDC_IRQ_EN); - UDCREG (UDC_IRQ_EN); - - UDCDBG ("disable USB DMA"); - outw (0, UDC_DMA_IRQ_EN); - UDCREG (UDC_DMA_IRQ_EN); - - UDCDBG ("initialize SYSCON1"); - outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1); - UDCREG (UDC_SYSCON1); - - return 0; -} - -/* Stall endpoint */ -static void udc_stall_ep (unsigned int ep_addr) -{ - /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("stall ep_addr %d", ep_addr); - - /* REVISIT? - * The OMAP TRM section 14.2.4.2 says we must check that the FIFO - * is empty before halting the endpoint. The current implementation - * doesn't check that the FIFO is empty. - */ - - if (!ep_num) { - outw (UDC_Stall_Cmd, UDC_SYSCON2); - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { - if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { - /* we have a valid rx endpoint, so halt it */ - outw (UDC_EP_Sel | ep_num, UDC_EP_NUM); - outw (UDC_Set_Halt, UDC_CTRL); - outw (ep_num, UDC_EP_NUM); - } - } else { - if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { - /* we have a valid tx endpoint, so halt it */ - outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM); - outw (UDC_Set_Halt, UDC_CTRL); - outw (ep_num, UDC_EP_NUM); - } - } -} - -/* Reset endpoint */ -#if 0 -static void udc_reset_ep (unsigned int ep_addr) -{ - /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - UDCDBGA ("reset ep_addr %d", ep_addr); - - if (!ep_num) { - /* control endpoint 0 can't be reset */ - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { - UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num, - inw (UDC_EP_RX (ep_num))); - if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) { - /* we have a valid rx endpoint, so reset it */ - outw (ep_num | UDC_EP_Sel, UDC_EP_NUM); - outw (UDC_Reset_EP, UDC_CTRL); - outw (ep_num, UDC_EP_NUM); - UDCDBGA ("OUT endpoint %d reset", ep_num); - } - } else { - UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num, - inw (UDC_EP_TX (ep_num))); - /* Resetting of tx endpoints seems to be causing the USB function - * module to fail, which causes problems when the driver is - * uninstalled. We'll skip resetting tx endpoints for now until - * we figure out what the problem is. - */ -#if 0 - if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) { - /* we have a valid tx endpoint, so reset it */ - outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM); - outw (UDC_Reset_EP, UDC_CTRL); - outw (ep_num | UDC_EP_Dir, UDC_EP_NUM); - UDCDBGA ("IN endpoint %d reset", ep_num); - } -#endif - } -} -#endif - -/* ************************************************************************** */ - -/** - * udc_check_ep - check logical endpoint - * - * Return physical endpoint number to use for this logical endpoint or zero if not valid. - */ -#if 0 -int udc_check_ep (int logical_endpoint, int packetsize) -{ - if ((logical_endpoint == 0x80) || - ((logical_endpoint & 0x8f) != logical_endpoint)) { - return 0; - } - - switch (packetsize) { - case 8: - case 16: - case 32: - case 64: - case 128: - case 256: - case 512: - break; - default: - return 0; - } - - return EP_ADDR_TO_PHYS_EP (logical_endpoint); -} -#endif - -/* - * udc_setup_ep - setup endpoint - * - * Associate a physical endpoint with endpoint_instance - */ -void udc_setup_ep (struct usb_device_instance *device, - unsigned int ep, struct usb_endpoint_instance *endpoint) -{ - UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address); - - /* This routine gets called by bi_modinit for endpoint 0 and from - * bi_config for all of the other endpoints. bi_config gets called - * during the DEVICE_CREATE, DEVICE_CONFIGURED, and - * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet - * RAM after bi_config scans the selected device configuration and - * initializes the endpoint structures, but before this routine enables - * the OUT endpoint FIFOs. Since bi_config calls this routine in a - * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our - * packet RAM here when ep==1. - * I really hate to do this here, but it seems like the API exported - * by the USB bus interface controller driver to the usbd-bi module - * isn't quite right so there is no good place to do this. - */ - if (ep == 1) { - omap1510_deconfigure_device (); - omap1510_configure_device (device); - } - - if (endpoint && (ep < UDC_MAX_ENDPOINTS)) { - int ep_addr = endpoint->endpoint_address; - - if (!ep_addr) { - /* nothing to do for endpoint 0 */ - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* nothing to do for IN (tx) endpoints */ - } else { /* OUT (rx) endpoint */ - if (endpoint->rcv_packetSize) { - /*struct urb* urb = &(urb_out_array[ep&0xFF]); */ - /*urb->endpoint = endpoint; */ - /*urb->device = device; */ - /*urb->buffer_length = sizeof(urb->buffer); */ - - /*endpoint->rcv_urb = urb; */ - omap1510_prepare_endpoint_for_rx (ep_addr); - } - } - } -} - -/** - * udc_disable_ep - disable endpoint - * @ep: - * - * Disable specified endpoint - */ -#if 0 -void udc_disable_ep (unsigned int ep_addr) -{ - /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */ - int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */ - - UDCDBGA ("disable ep_addr %d", ep_addr); - - if (!ep_num) { - /* nothing to do for endpoint 0 */ ; - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - if (endpoint->tx_packetSize) { - /* we have a valid tx endpoint */ - /*usbd_flush_tx(endpoint); */ - endpoint->tx_urb = NULL; - } - } else { - if (endpoint->rcv_packetSize) { - /* we have a valid rx endpoint */ - /*usbd_flush_rcv(endpoint); */ - endpoint->rcv_urb = NULL; - } - } -} -#endif - -/* ************************************************************************** */ - -/** - * udc_connected - is the USB cable connected - * - * Return non-zero if cable is connected. - */ -#if 0 -int udc_connected (void) -{ - return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); -} -#endif - -/* Turn on the USB connection by enabling the pullup resistor */ -void udc_connect (void) -{ - UDCDBG ("connect, enable Pullup"); - outl (0x00000018, FUNC_MUX_CTRL_D); -} - -/* Turn off the USB connection by disabling the pullup resistor */ -void udc_disconnect (void) -{ - UDCDBG ("disconnect, disable Pullup"); - outl (0x00000000, FUNC_MUX_CTRL_D); -} - -/* ************************************************************************** */ - - -/* - * udc_disable_interrupts - disable interrupts - * switch off interrupts - */ -#if 0 -void udc_disable_interrupts (struct usb_device_instance *device) -{ - UDCDBG ("disabling all interrupts"); - outw (0, UDC_IRQ_EN); -} -#endif - -/* ************************************************************************** */ - -/** - * udc_ep0_packetsize - return ep0 packetsize - */ -#if 0 -int udc_ep0_packetsize (void) -{ - return EP0_PACKETSIZE; -} -#endif - -/* Switch on the UDC */ -void udc_enable (struct usb_device_instance *device) -{ - UDCDBGA ("enable device %p, status %d", device, device->status); - - /* initialize driver state variables */ - udc_devstat = 0; - - /* Save the device structure pointer */ - udc_device = device; - - /* Setup ep0 urb */ - if (!ep0_urb) { - ep0_urb = - usbd_alloc_urb (udc_device, - udc_device->bus->endpoint_array); - } else { - serial_printf ("udc_enable: ep0_urb already allocated %p\n", - ep0_urb); - } - - UDCDBG ("Check clock status"); - UDCREG (STATUS_REQ); - - /* The VBUS_MODE bit selects whether VBUS detection is done via - * software (1) or hardware (0). When software detection is - * selected, VBUS_CTRL selects whether USB is not connected (0) - * or connected (1). - */ - outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE, - FUNC_MUX_CTRL_0); - UDCREGL (FUNC_MUX_CTRL_0); - - omap1510_configure_device (device); -} - -/* Switch off the UDC */ -void udc_disable (void) -{ - UDCDBG ("disable UDC"); - - omap1510_deconfigure_device (); - - /* The VBUS_MODE bit selects whether VBUS detection is done via - * software (1) or hardware (0). When software detection is - * selected, VBUS_CTRL selects whether USB is not connected (0) - * or connected (1). - */ - outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0); - outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0); - UDCREGL (FUNC_MUX_CTRL_0); - - /* Free ep0 URB */ - if (ep0_urb) { - /*usbd_dealloc_urb(ep0_urb); */ - ep0_urb = NULL; - } - - /* Reset device pointer. - * We ought to do this here to balance the initialization of udc_device - * in udc_enable, but some of our other exported functions get called - * by the bus interface driver after udc_disable, so we have to hang on - * to the device pointer to avoid a null pointer dereference. */ - /* udc_device = NULL; */ -} - -/** - * udc_startup - allow udc code to do any additional startup - */ -void udc_startup_events (struct usb_device_instance *device) -{ - /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ - usbd_device_event_irq (device, DEVICE_INIT, 0); - - /* The DEVICE_CREATE event puts the USB device in the state - * STATE_ATTACHED. - */ - usbd_device_event_irq (device, DEVICE_CREATE, 0); - - /* Some USB controller driver implementations signal - * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. - * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, - * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. - * The OMAP USB client controller has the capability to detect when the - * USB cable is connected to a powered USB bus via the ATT bit in the - * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and - * DEVICE_RESET events until later. - */ - - udc_enable (device); -} - -/** - * udc_irq - do pseudo interrupts - */ -void udc_irq(void) -{ - /* Loop while we have interrupts. - * If we don't do this, the input chain - * polling delay is likely to miss - * host requests. - */ - while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { - /* Handle any new IRQs */ - omap1510_udc_irq (); - omap1510_udc_noniso_irq (); - } -} - -/* Flow control */ -void udc_set_nak(int epid) -{ - /* TODO: implement this functionality in omap1510 */ -} - -void udc_unset_nak (int epid) -{ - /* TODO: implement this functionality in omap1510 */ -} -#endif