From: Igor Guryanov Date: Wed, 24 Dec 2014 13:26:14 +0000 (+0300) Subject: arc: add ECR (exception cause register) output X-Git-Tag: v2015.04-rc1~68^2~8 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e47d733867b2da336754718f7eaa7f51655dbefa;p=u-boot arc: add ECR (exception cause register) output Exception cause register (ECR) contains value that describes a reason for exception that has happened. This helps a lot to figure-out what went wrong. Now we print this register contents when dumping registers. Signed-off-by: Alexey Brodkin Signed-off-by: Igor Guryanov --- diff --git a/arch/arc/cpu/arc700/interrupts.c b/arch/arc/cpu/arc700/interrupts.c index d93a6eb547..7dde74b438 100644 --- a/arch/arc/cpu/arc700/interrupts.c +++ b/arch/arc/cpu/arc700/interrupts.c @@ -61,6 +61,7 @@ static void print_reg_file(long *reg_rev, int start_num) void show_regs(struct pt_regs *regs) { + printf("ECR:\t0x%08lx\n", regs->ecr); printf("RET:\t0x%08lx\nBLINK:\t0x%08lx\nSTAT32:\t0x%08lx\n", regs->ret, regs->blink, regs->status32); printf("GP: 0x%08lx\t r25: 0x%08lx\t\n", regs->r26, regs->r25); diff --git a/arch/arc/cpu/arc700/start.S b/arch/arc/cpu/arc700/start.S index 563513b690..4d505bfb7c 100644 --- a/arch/arc/cpu/arc700/start.S +++ b/arch/arc/cpu/arc700/start.S @@ -57,11 +57,13 @@ .endm .macro SAVE_ALL_SYS - + /* saving %r0 to reg->r0 in advance since we read %ecr into it */ + st %r0, [%sp, -8] + lr %r0, [%ecr] /* all stack addressing is manual so far */ st %r0, [%sp] - lr %r0, [%ecr] - st %r0, [%sp, 8] /* ECR */ - st %sp, [%sp, 4] + st %sp, [%sp, -4] + /* now move %sp to reg->r0 position so we can do "push" automatically */ + sub %sp, %sp, 8 SAVE_R1_TO_R24 PUSH %r25