From: Peng Fan Date: Thu, 1 Sep 2016 03:13:39 +0000 (+0800) Subject: mmc: sd: optimize erase X-Git-Tag: v2016.11-rc1~121^2~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e492dbb41e025ac1a7d7934b1df52b2f0485f8dd;p=u-boot mmc: sd: optimize erase To SD, there is no erase group, then the value erase_grp_size will be default 1. When erasing SD blocks, the blocks will be erased one by one, which is time consuming. We use AU_SIZE as a group to speed up the erasing. Erasing 4MB with a SD2.0 Card with AU_SIZE 4MB. `time mmc erase 0x100000 0x2000` time: 44.856 seconds (before optimization) time: 0.335 seconds (after optimization) Signed-off-by: Peng Fan Cc: Jaehoon Chung Cc: Simon Glass Cc: Bin Meng Cc: Stefan Wahren Cc: Clemens Gruber Cc: Kever Yang Cc: Eric Nelson Cc: Stephen Warren --- diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c index 0f8b5c79d7..2289640375 100644 --- a/drivers/mmc/mmc_write.c +++ b/drivers/mmc/mmc_write.c @@ -100,8 +100,13 @@ unsigned long mmc_berase(struct blk_desc *block_dev, lbaint_t start, & ~(mmc->erase_grp_size - 1)) - 1); while (blk < blkcnt) { - blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ? - mmc->erase_grp_size : (blkcnt - blk); + if (IS_SD(mmc) && mmc->ssr.au) { + blk_r = ((blkcnt - blk) > mmc->ssr.au) ? + mmc->ssr.au : (blkcnt - blk); + } else { + blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ? + mmc->erase_grp_size : (blkcnt - blk); + } err = mmc_erase_t(mmc, start + blk, blk_r); if (err) break;