From: Kern Sibbald Date: Fri, 4 Sep 2009 16:58:45 +0000 (+0000) Subject: Fix some vertical bars X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e7bd679852997e79dd1f036a01698198e5ff152a;p=bacula%2Fdocs Fix some vertical bars --- diff --git a/docs/manuals/en/concepts/concepts.kilepr b/docs/manuals/en/concepts/concepts.kilepr index 013bdd5f..de0f8984 100644 --- a/docs/manuals/en/concepts/concepts.kilepr +++ b/docs/manuals/en/concepts/concepts.kilepr @@ -164,7 +164,7 @@ archive=true column=0 encoding=UTF-8 highlight=LaTeX -line=191 +line=209 open=true order=0 diff --git a/docs/manuals/en/concepts/newfeatures.tex b/docs/manuals/en/concepts/newfeatures.tex index f3217a4b..c2c69310 100644 --- a/docs/manuals/en/concepts/newfeatures.tex +++ b/docs/manuals/en/concepts/newfeatures.tex @@ -331,7 +331,7 @@ The \texttt{estimate} command can now use the accurate code to detect changes and give a better estimation. You can set the accurate behavior on the command line by using -\texttt{accurate=yes/no} or use the Job setting as default value. +\texttt{accurate=yes\vb{}no} or use the Job setting as default value. \begin{verbatim} * estimate listing accurate=yes level=incremental job=BackupJob @@ -357,8 +357,8 @@ time, then the file will be backed up. This does not, however, permit tracking what files have been deleted and will miss any file with an old time that may have been restored to or moved onto the client filesystem. -\subsection{Accurate = \lt{}yes|no\gt{}} -If the {\bf Accurate = \lt{}yes|no\gt{}} directive is enabled (default no) in +\subsection{Accurate = \lt{}yes\vb{}no\gt{}} +If the {\bf Accurate = \lt{}yes\vb{}no\gt{}} directive is enabled (default no) in the Job resource, the job will be run as an Accurate Job. For a {\bf Full} backup, there is no difference, but for {\bf Differential} and {\bf Incremental} backups, the Director will send a list of all previous files @@ -895,7 +895,7 @@ are specified in the Job resource. They are: -\subsection{Allow Duplicate Jobs = \lt{}yes|no\gt{}} +\subsection{Allow Duplicate Jobs = \lt{}yes\vb{}no\gt{}} \index[general]{Allow Duplicate Jobs} If this directive is enabled duplicate jobs will be run. If the directive is set to {\bf no} (default) then only one job of a given name @@ -908,7 +908,7 @@ They are: will be cancelled. -\subsection{Allow Higher Duplicates = \lt{}yes|no\gt{}} +\subsection{Allow Higher Duplicates = \lt{}yes\vb{}no\gt{}} \index[general]{Allow Higher Duplicates} If this directive is set to {\bf yes} (default) the job with a higher priority (lower priority number) will be permitted to run, and @@ -916,14 +916,14 @@ They are: priorities of the two jobs are the same, the outcome is determined by other directives (see below). -\subsection{Cancel Queued Duplicates = \lt{}yes|no\gt{}} +\subsection{Cancel Queued Duplicates = \lt{}yes\vb{}no\gt{}} \index[general]{Cancel Queued Duplicates} If {\bf Allow Duplicate Jobs} is set to {\bf no} and if this directive is set to {\bf yes} any job that is already queued to run but not yet running will be canceled. The default is {\bf no}. -\subsection{Cancel Running Duplicates = \lt{}yes|no\gt{}} +\subsection{Cancel Running Duplicates = \lt{}yes\vb{}no\gt{}} \index[general]{Cancel Running Duplicates} If {\bf Allow Duplicate Jobs} is set to {\bf no} and if this directive is set to {\bf yes} any job that is already running @@ -992,7 +992,7 @@ greater than the specified interval, and the job would normally be an {\bf Incremental}, it will be automatically upgraded to a {\bf Differential} backup. -\section{Honor No Dump Flag = \lt{}yes|no\gt{}} +\section{Honor No Dump Flag = \lt{}yes\vb{}no\gt{}} \index[general]{MaxDiffInterval} On FreeBSD systems, each file has a {\bf no dump flag} that can be set by the user, and when it is set it is an indication to backup programs @@ -1001,7 +1001,7 @@ new Options directive within a FileSet resource, which instructs Bacula to obey this flag. The new directive is: \begin{verbatim} - Honor No Dump Flag = yes|no + Honor No Dump Flag = yes\vb{}no \end{verbatim} The default value is {\bf no}. @@ -1569,7 +1569,7 @@ in the directory {\bf linux/usb}. \section{Miscellaneous} \index[general]{Misc New Features} -\subsection{Allow Mixed Priority = \lt{}yes|no\gt{}} +\subsection{Allow Mixed Priority = \lt{}yes\vb{}no\gt{}} \index[general]{Allow Mixed Priority} This directive is only implemented in version 2.5 and later. When set to {\bf yes} (default {\bf no}), this job may run even if lower @@ -1602,7 +1602,7 @@ in the directory {\bf linux/usb}. There were no files inserted into the tree, so file selection is not possible.Most likely your retention policy pruned the files - Do you want to restore all the files? (yes|no): no + Do you want to restore all the files? (yes\vb{}no): no Regexp matching files to restore? (empty to abort): /tmp/regress/(bin|tests)/ Bootstrap records written to /tmp/regress/working/zog4-dir.restore.1.bsr diff --git a/docs/manuals/en/concepts/spooling.tex b/docs/manuals/en/concepts/spooling.tex index 0a45868f..b7d883a3 100644 --- a/docs/manuals/en/concepts/spooling.tex +++ b/docs/manuals/en/concepts/spooling.tex @@ -54,18 +54,18 @@ The following directives can be used to control data spooling. \item To turn data spooling on/off at the Job level in the Job resource in the Director's conf file (default {\bf no}). -{\bf SpoolData = yes|no} +{\bf SpoolData = yes\vb{}no} \item To override the Job specification in a Schedule Run directive in the Director's conf file. -{\bf SpoolData = yes|no} +{\bf SpoolData = yes\vb{}no} \item To override the Job specification in a bconsole session using the \texttt{run} command. Please note that this does {\bf not } refer to a configuration statement, but to an argument for the run command. -{\bf SpoolData=yes|no} +{\bf SpoolData=yes\vb{}no} \item To limit the the maximum spool file size for a particular job in the Job resource diff --git a/docs/manuals/en/install/configure.tex b/docs/manuals/en/install/configure.tex index a3dbc50b..07521566 100644 --- a/docs/manuals/en/install/configure.tex +++ b/docs/manuals/en/install/configure.tex @@ -194,7 +194,7 @@ constructs such as {\bf \$HOME} are interpreted to be their correct values. A 64 bit integer value. Typically these are values such as bytes that can exceed 4 billion and thus require a 64 bit value. -\item [yes|no] +\item [yes\vb{}no] \index[dir]{yes or no } Either a {\bf yes} or a {\bf no}. diff --git a/docs/manuals/en/install/dirdconf.tex b/docs/manuals/en/install/dirdconf.tex index 93b21050..276d9d1e 100644 --- a/docs/manuals/en/install/dirdconf.tex +++ b/docs/manuals/en/install/dirdconf.tex @@ -419,7 +419,7 @@ the FileSets may be the same). specify here followed by the date and time the job was scheduled for execution. This directive is required. -\item [Enabled = \lt{}yes|no\gt{}] +\item [Enabled = \lt{}yes\vb{}no\gt{}] \index[dir]{Enable} \index[dir]{Directive!Enable} This directive allows you to enable or disable automatic execution @@ -712,7 +712,7 @@ For a {\bf Verify} Job, the Level may be one of the following: have been deleted. \end{description} -\item [Accurate = \lt{}yes|no\gt{}] +\item [Accurate = \lt{}yes\vb{}no\gt{}] \index[dir]{Accurate} In accurate mode, the File daemon knowns exactly which files were present after the last backup. So it is able to handle deleted or renamed files. @@ -981,7 +981,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run considered. \label{PreferMountedVolumes} -\item [Prefer Mounted Volumes = \lt{}yes|no\gt{}] +\item [Prefer Mounted Volumes = \lt{}yes\vb{}no\gt{}] \index[dir]{Prefer Mounted Volumes} \index[dir]{Directive!Prefer Mounted Volumes} If the Prefer Mounted Volumes directive is set to {\bf yes} (default @@ -1017,7 +1017,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run pools so that Bacula will be forced to mount Volumes from those Pools on different drives. -\item [Prune Jobs = \lt{}yes|no\gt{}] +\item [Prune Jobs = \lt{}yes\vb{}no\gt{}] \index[dir]{Prune Jobs} \index[dir]{Directive!Prune Jobs} Normally, pruning of Jobs from the Catalog is specified on a Client by @@ -1027,7 +1027,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run default is {\bf no}. -\item [Prune Files = \lt{}yes|no\gt{}] +\item [Prune Files = \lt{}yes\vb{}no\gt{}] \index[dir]{Prune Files} \index[dir]{Directive!Prune Files} Normally, pruning of Files from the Catalog is specified on a Client by @@ -1036,7 +1036,7 @@ during working hours. We can see it like \texttt{Max Start Delay + Max Run yes}, it will override the value specified in the Client resource. The default is {\bf no}. -\item [Prune Volumes = \lt{}yes|no\gt{}] +\item [Prune Volumes = \lt{}yes\vb{}no\gt{}] \index[dir]{Prune Volumes} \index[dir]{Directive!Prune Volumes} Normally, pruning of Volumes from the Catalog is specified on a Client @@ -1457,7 +1457,7 @@ RunScript { Note, please see the notes above in {\bf RunScript} concerning Windows clients. -\item [Rerun Failed Levels = \lt{}yes|no\gt{}] +\item [Rerun Failed Levels = \lt{}yes\vb{}no\gt{}] \index[dir]{Rerun Failed Levels} \index[dir]{Directive!Rerun Failed Levels} If this directive is set to {\bf yes} (default no), and Bacula detects that @@ -1475,7 +1475,7 @@ RunScript { when checking for failed levels, which means that any FileSet change will trigger a rerun. -\item [Spool Data = \lt{}yes|no\gt{}] +\item [Spool Data = \lt{}yes\vb{}no\gt{}] \index[dir]{Spool Data} \index[dir]{Directive!Spool Data} @@ -1490,7 +1490,7 @@ RunScript { NOTE: When this directive is set to yes, Spool Attributes is also automatically set to yes. -\item [Spool Attributes = \lt{}yes|no\gt{}] +\item [Spool Attributes = \lt{}yes\vb{}no\gt{}] \index[dir]{Spool Attributes} \index[dir]{Directive!Spool Attributes} \index[dir]{slow} @@ -1597,7 +1597,7 @@ RunScript { if the backed up file already exists, Bacula skips restoring this file. \end{description} -\item [Prefix Links=\lt{}yes|no\gt{}] +\item [Prefix Links=\lt{}yes\vb{}no\gt{}] \index[dir]{Prefix Links} \index[dir]{Directive!Prefix Links} If a {\bf Where} path prefix is specified for a recovery job, apply it @@ -1621,7 +1621,7 @@ RunScript { documented under \ilink{ Maximum Concurrent Jobs}{DirMaxConJobs} in the Director's resource. -\item [Reschedule On Error = \lt{}yes|no\gt{}] +\item [Reschedule On Error = \lt{}yes\vb{}no\gt{}] \index[dir]{Reschedule On Error} \index[dir]{Directive!Reschedule On Error} If this directive is enabled, and the job terminates in error, the job @@ -1746,7 +1746,7 @@ priority ones. This insures that Bacula will examine the jobs in the correct order, and that your priority scheme will be respected. \label{AllowMixedPriority} -\item [Allow Mixed Priority = \lt{}yes|no\gt{}] +\item [Allow Mixed Priority = \lt{}yes\vb{}no\gt{}] \index[dir]{Allow Mixed Priority} This directive is only implemented in version 2.5 and later. When set to {\bf yes} (default {\bf no}), this job may run even if lower @@ -1763,7 +1763,7 @@ correct order, and that your priority scheme will be respected. be run until the priority 5 job has finished. \label{WritePartAfterJob} -\item [Write Part After Job = \lt{}yes|no\gt{}] +\item [Write Part After Job = \lt{}yes\vb{}no\gt{}] \index[dir]{Write Part After Job} \index[dir]{Directive!Write Part After Job} This directive is only implemented in version 1.37 and later. @@ -1913,7 +1913,7 @@ upgraded from another type to a full backup. specifies to use the Pool named {\bf Incremental} if the job is an incremental backup. -\item [SpoolData=yes|no] +\item [SpoolData=yes\vb{}no] \index[dir]{SpoolData} \index[dir]{Directive!SpoolData} tells Bacula to request the Storage daemon to spool data to a disk file @@ -1931,7 +1931,7 @@ incremental backup. This directive is available only in Bacula version 2.3.5 or later. -\item [WritePartAfterJob=yes|no] +\item [WritePartAfterJob=yes\vb{}no] \index[dir]{WritePartAfterJob} \index[dir]{Directive!WritePartAfterJob} tells Bacula to request the Storage daemon to write the current part @@ -2226,7 +2226,7 @@ console run command. This directive is required. The default is 180 days. \label{AutoPrune} -\item [AutoPrune = \lt{}yes|no\gt{}] +\item [AutoPrune = \lt{}yes\vb{}no\gt{}] \index[dir]{AutoPrune} \index[dir]{Directive!AutoPrune} If AutoPrune is set to {\bf yes} (default), Bacula (version 1.20 or greater) @@ -2401,7 +2401,7 @@ the Director. check so that you don't try to write data for a DLT onto an 8mm device. \label{Autochanger1} -\item [Autochanger = \lt{}yes|no\gt{}] +\item [Autochanger = \lt{}yes\vb{}no\gt{}] \index[dir]{Autochanger} \index[dir]{Directive!Autochanger} If you specify {\bf yes} for this command (the default is {\bf no}), @@ -2599,7 +2599,7 @@ The Pool Resource defined in the Director's configuration file the Job resource or in the Pool, but it must be specified in one or the other. If not configuration error will result. -\item [Use Volume Once = \lt{}yes|no\gt{}] +\item [Use Volume Once = \lt{}yes\vb{}no\gt{}] \index[dir]{Use Volume Once} \index[dir]{Directive!Use Volume Once} This directive if set to {\bf yes} specifies that each volume is to be @@ -2729,7 +2729,7 @@ The Pool Resource defined in the Director's configuration file must use the \ilink{\bf update volume}{UpdateCommand} command in the Console. -\item [Catalog Files = \lt{}yes|no\gt{}] +\item [Catalog Files = \lt{}yes\vb{}no\gt{}] \index[dir]{Catalog Files} \index[dir]{Directive!Catalog Files} This directive defines whether or not you want the names of the files @@ -2742,7 +2742,7 @@ The Pool Resource defined in the Director's configuration file restore} command nor any other command that references File entries. \label{PoolAutoPrune} -\item [AutoPrune = \lt{}yes|no\gt{}] +\item [AutoPrune = \lt{}yes\vb{}no\gt{}] \index[dir]{AutoPrune} \index[dir]{Directive!AutoPrune} If AutoPrune is set to {\bf yes} (default), Bacula (version 1.20 or @@ -2832,7 +2832,7 @@ The Pool Resource defined in the Director's configuration file \label{PoolRecycle} -\item [Recycle = \lt{}yes|no\gt{}] +\item [Recycle = \lt{}yes\vb{}no\gt{}] \index[dir]{Recycle} \index[dir]{Directive!Recycle} This directive specifies whether or not Purged Volumes may be recycled. @@ -2861,7 +2861,7 @@ The Pool Resource defined in the Director's configuration file \label{RecycleOldest} -\item [Recycle Oldest Volume = \lt{}yes|no\gt{}] +\item [Recycle Oldest Volume = \lt{}yes\vb{}no\gt{}] \index[dir]{Recycle Oldest Volume} \index[dir]{Directive!Recycle Oldest Volume} This directive instructs the Director to search for the oldest used @@ -2885,7 +2885,7 @@ The Pool Resource defined in the Director's configuration file \label{RecycleCurrent} -\item [Recycle Current Volume = \lt{}yes|no\gt{}] +\item [Recycle Current Volume = \lt{}yes\vb{}no\gt{}] \index[dir]{Recycle Current Volume} \index[dir]{Directive!Recycle Current Volume} If Bacula needs a new Volume, this directive instructs Bacula to Prune @@ -2908,7 +2908,7 @@ The Pool Resource defined in the Director's configuration file \label{PurgeOldest} -\item [Purge Oldest Volume = \lt{}yes|no\gt{}] +\item [Purge Oldest Volume = \lt{}yes\vb{}no\gt{}] \index[dir]{Purge Oldest Volume} \index[dir]{Directive!Purge Oldest Volume} This directive instructs the Director to search for the oldest used @@ -3108,7 +3108,7 @@ defined. by MySQL and PostgreSQL and is ignored by SQLite if provided. This directive is optional. -%% \item [Multiple Connections = \lt{}yes|no\gt{}] +%% \item [Multiple Connections = \lt{}yes\vb{}no\gt{}] %% \index[dir]{Multiple Connections} %% \index[dir]{Directive!Multiple Connections} %% By default, this directive is set to no. In that case, each job that uses diff --git a/docs/manuals/en/install/filedconf.tex b/docs/manuals/en/install/filedconf.tex index c969770b..f7a8921b 100644 --- a/docs/manuals/en/install/filedconf.tex +++ b/docs/manuals/en/install/filedconf.tex @@ -287,7 +287,7 @@ permitted to contact this Client. This password must be the same as the password specified in the Client resource in the Director's configuration file. This directive is required. -\item [Monitor = \lt{}yes|no\gt{}] +\item [Monitor = \lt{}yes\vb{}no\gt{}] \index[fd]{Monitor} \index[fd]{Directive!Monitor} If Monitor is set to {\bf no} (default), this director will have full access diff --git a/docs/manuals/en/install/fileset.tex b/docs/manuals/en/install/fileset.tex index 724bb67e..f8a087f2 100644 --- a/docs/manuals/en/install/fileset.tex +++ b/docs/manuals/en/install/fileset.tex @@ -52,7 +52,7 @@ defined for each Backup job. \index[dir]{Directive!Name} The name of the FileSet resource. This directive is required. -\item [Ignore FileSet Changes = \lt{}yes|no\gt{}] +\item [Ignore FileSet Changes = \lt{}yes\vb{}no\gt{}] \index[dir]{Ignore FileSet Changes} \index[dir]{Directive!Ignore FileSet Changes} Normally, if you modify the FileSet Include or Exclude lists, @@ -70,7 +70,7 @@ defined for each Backup job. Exclude, Bacula will force a Full backup to ensure that everything is properly backed up. -\item [Enable VSS = \lt{}yes|no\gt{}] +\item [Enable VSS = \lt{}yes\vb{}no\gt{}] \index[dir]{Enable VSS} \index[dir]{Directive!Enable VSS} If this directive is set to {\bf yes} the File daemon will be notified @@ -325,7 +325,7 @@ The directives within an Options resource may be one of the following: Level=DiskToCatalog} verify is {\bf pins5} i.e. compare permission bits, inodes, number of links, size, and MD5 changes. -\item [onefs=yes|no] +\item [onefs=yes\vb{}no] \index[dir]{onefs} \index[dir]{Directive!onefs} If set to {\bf yes} (the default), {\bf Bacula} will remain on a single @@ -432,7 +432,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 that it did not specify {\bf /var}, then {\bf /var} will not be backed up. -\item [honor nodump flag=\lt{}yes|no\gt{}] +\item [honor nodump flag=\lt{}yes\vb{}no\gt{}] \index[dir]{honornodumpflag} \index[dir]{Directive!honornodumpflag} If your file system supports the {\bf nodump} flag (e. g. most @@ -447,7 +447,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 \label{portable} -\item [portable=yes|no] +\item [portable=yes\vb{}no] \index[dir]{portable} \index[dir]{Directive!portable} If set to {\bf yes} (default is {\bf no}), the Bacula File daemon will @@ -462,7 +462,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 default ({\bf no}) so that the maximum information concerning your files is saved. -\item [recurse=yes|no] +\item [recurse=yes\vb{}no] \index[dir]{recurse} \index[dir]{Directive!recurse} If set to {\bf yes} (the default), Bacula will recurse (or descend) into @@ -473,7 +473,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 contained in the subdirectories. Normally, you will want the default ({\bf yes}). -\item [sparse=yes|no] +\item [sparse=yes\vb{}no] \index[dir]{sparse} \index[dir]{Directive!sparse} Enable special code that checks for sparse files such as created by @@ -511,7 +511,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 really sparse. \label{readfifo} -\item [readfifo=yes|no] +\item [readfifo=yes\vb{}no] \index[dir]{readfifo} \index[dir]{Directive!readfifo} If enabled, tells the Client to read the data on a backup and write the @@ -534,7 +534,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 exec > /dev/null \end{verbatim} -\item [noatime=yes|no] +\item [noatime=yes\vb{}no] \index[dir]{noatime} \index[dir]{Directive!noatime} If enabled, and if your Operating System supports the O\_NOATIME file @@ -554,7 +554,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 silently ignored by Bacula. -\item [mtimeonly=yes|no] +\item [mtimeonly=yes\vb{}no] \index[dir]{mtimeonly} \index[dir]{Directive!mtimeonly} If enabled, tells the Client that the selection of files during @@ -564,7 +564,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 st\_mtime and the st\_ctime values. In general, it is not recommended to use this option. -\item [keepatime=yes|no] +\item [keepatime=yes\vb{}no] \index[dir]{keepatime} \index[dir]{Directive!keepatime} The default is {\bf no}. When enabled, Bacula will reset the st\_atime @@ -584,7 +584,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 to use {\bf mtimeonly = yes} as well as keepatime (thanks to Rudolf Cejka for this tip). -\item [checkfilechanges=yes|no] +\item [checkfilechanges=yes\vb{}no] \index[dir]{checkfilechanges} \index[dir]{Directive!checkfilechanges} On versions 2.0.4 or greater, @@ -598,7 +598,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 In general, it is recommended to use this option. -\item [hardlinks=yes|no] +\item [hardlinks=yes\vb{}no] \index[dir]{hardlinks} \index[dir]{Directive!hardlinks} When enabled (default), this directive will cause hard links to be @@ -756,14 +756,14 @@ Change: 2005-11-06 12:36:48.000000000 +0100 more. -\item [exclude=yes|no] +\item [exclude=yes\vb{}no] \index[dir]{exclude} \index[dir]{Directive!exclude} The default is {\bf no}. When enabled, any files matched within the Options will be excluded from the backup. \label{ACLSupport} -\item [aclsupport=yes|no] +\item [aclsupport=yes\vb{}no] \index[dir]{aclsupport} \index[dir]{Directive!aclsupport} The default is {\bf no}. If this option is set to yes, and you have the @@ -779,7 +779,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 filesystem with ACLs, then you restore them to a different filesystem (perhaps reiserfs) that does not have ACLs, the ACLs will be ignored. -\item [ignore case=yes|no] +\item [ignore case=yes\vb{}no] \index[dir]{ignore case} \index[dir]{Directive!ignore case} The default is {\bf no}. On Windows systems, you will almost surely @@ -830,7 +830,7 @@ Change: 2005-11-06 12:36:48.000000000 +0100 This option is not implemented in Unix/Linux systems. -\item [hfsplussupport=yes|no] +\item [hfsplussupport=yes\vb{}no] \index[dir]{hfsplussupport} \index[dir]{Directive!hfsplussupport} This option allows you to turn on support for Mac OSX HFS plus diff --git a/docs/manuals/en/install/storedconf.tex b/docs/manuals/en/install/storedconf.tex index 2d80a369..e5967921 100644 --- a/docs/manuals/en/install/storedconf.tex +++ b/docs/manuals/en/install/storedconf.tex @@ -223,7 +223,7 @@ values in the Director's configuration file. Specifies the password that must be supplied by the above named Director. This directive is required. -\item [Monitor = \lt{}yes|no\gt{}] +\item [Monitor = \lt{}yes\vb{}no\gt{}] \index[sd]{Monitor} \index[sd]{Directive!Monitor} If Monitor is set to {\bf no} (default), this director will have full @@ -409,7 +409,7 @@ Device { unique Media Type. \label{Autochanger} -\item [Autochanger = {\it Yes|No}] +\item [Autochanger = {\it yes\vb{}no}] \index[sd]{Autochanger} \index[sd]{Directive!Autochanger} If {\bf Yes}, this device belongs to an automatic tape changer, and you @@ -518,7 +518,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface the past -- the default mtx-changer script works for any number of drives. -\item [Autoselect = {\it Yes|No}] +\item [Autoselect = {\it yes\vb{}no}] \index[sd]{Autoselect} \index[sd]{Directive!Autoselect} If this directive is set to {\bf yes} (default), and the Device @@ -554,7 +554,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface for a open before timing out. If this time is exceeded, Bacula will cancel the job. The default is 5 minutes. -\item [Always Open = {\it Yes|No}] +\item [Always Open = {\it yes\vb{}no}] \index[sd]{Always Open} \index[sd]{Directive!Always Open} If {\bf Yes} (default), Bacula will always keep the device open unless @@ -607,7 +607,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface \ilink{description of Offline On Unmount}{NoTapeInDrive} in the Tape Testing chapter. -\item [Close on Poll= {\it Yes|No}] +\item [Close on Poll= {\it yes\vb{}no}] \index[sd]{Close on Poll} \index[sd]{Directive!Close on Poll} If {\bf Yes}, Bacula close the device (equivalent to an unmount except no @@ -628,7 +628,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface starts that needs the the drive. \label{removablemedia} -\item [Removable media = {\it Yes|No}] +\item [Removable media = {\it yes\vb{}no}] \index[sd]{Removable media} \index[sd]{Directive!Removable media} If {\bf Yes}, this device supports removable media (for example, tapes @@ -653,7 +653,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface {\bf Removable Media}. -\item [Random access = {\it Yes|No}] +\item [Random access = {\it yes\vb{}no}] \index[sd]{Random access} \index[sd]{Directive!Random access} If {\bf Yes}, the archive device is assumed to be a random access medium @@ -663,7 +663,7 @@ bacula-sd Alert: TapeAlert[32]: Interface: Problem with SCSI interface {\bf No} for non-random access devices such as tapes and named pipes. -\item [Requires Mount = {\it Yes|No}] +\item [Requires Mount = {\it yes\vb{}no}] \index[sd]{Requires Mount } When this directive is enabled, the Storage daemon will submit a {\bf Mount Command} before attempting to open the device. @@ -804,7 +804,7 @@ the editing codes that can be used in this directive. The maximum {\bf size-in-bytes} possible is 2,000,000. -\item [Hardware End of Medium = {\it Yes|No}] +\item [Hardware End of Medium = {\it yes\vb{}no}] \index[sd]{Hardware End of Medium} \index[sd]{Directive!Hardware End of Medium} If {\bf No}, the archive device is not required to support end of medium @@ -826,7 +826,7 @@ the editing codes that can be used in this directive. supports this function. All modern (after 1998) tape drives support this feature. -\item [Fast Forward Space File = {\it Yes|No}] +\item [Fast Forward Space File = {\it yes\vb{}no}] \index[sd]{Fast Forward Space File} \index[sd]{Directive!Fast Forward Space File} If {\bf No}, the archive device is not required to support keeping track of @@ -840,7 +840,7 @@ the editing codes that can be used in this directive. Default setting for Fast Forward Space File is {\bf Yes}. -\item [Use MTIOCGET = {\it Yes|No}] +\item [Use MTIOCGET = {\it yes\vb{}no}] \index[sd]{Use MTIOCGET} \index[sd]{Directive!Use MTIOCGET} If {\bf No}, the operating system is not required to support keeping track of @@ -852,7 +852,7 @@ the editing codes that can be used in this directive. on a few *BSD systems. Operating systems known to work correctly are Solaris, Linux and FreeBSD. -\item [BSF at EOM = {\it Yes|No}] +\item [BSF at EOM = {\it yes\vb{}no}] \index[sd]{BSF at EOM} \index[sd]{Directive!BSF at EOM} If {\bf No}, the default, no special action is taken by Bacula with the End @@ -866,14 +866,14 @@ the editing codes that can be used in this directive. the second EOF mark. Determination of whether or not you need this directive is done using the {\bf test} command in the {\bf btape} program. -\item [TWO EOF = {\it Yes|No}] +\item [TWO EOF = {\it yes\vb{}no}] \index[sd]{TWO EOF} \index[sd]{Directive!TWO EOF} If {\bf Yes}, Bacula will write two end of file marks when terminating a tape -- i.e. after the last job or at the end of the medium. If {\bf No}, the default, Bacula will only write one end of file to terminate the tape. -\item [Backward Space Record = {\it Yes|No}] +\item [Backward Space Record = {\it yes\vb{}no}] \index[sd]{Backward Space Record} \index[sd]{Directive!Backward Space Record} If {\it Yes}, the archive device supports the {\tt MTBSR ioctl} to backspace @@ -885,7 +885,7 @@ default, Bacula will only write one end of file to terminate the tape. the test will not be done. This causes no harm as the re-read process is precautionary rather than required. -\item [Backward Space File = {\it Yes|No}] +\item [Backward Space File = {\it yes\vb{}no}] \index[sd]{Backward Space File} \index[sd]{Directive!Backward Space File} If {\it Yes}, the archive device supports the {\bf MTBSF} and {\bf MTBSF @@ -894,7 +894,7 @@ default, Bacula will only write one end of file to terminate the tape. advanced forward to the desired position. Default is {\bf Yes} for non random-access devices. -\item [Forward Space Record = {\it Yes|No}] +\item [Forward Space Record = {\it yes\vb{}no}] \index[sd]{Forward Space Record} \index[sd]{Directive!Forward Space Record} If {\it Yes}, the archive device must support the {\bf MTFSR ioctl} to @@ -902,14 +902,14 @@ default, Bacula will only write one end of file to terminate the tape. advance the position on the device. Default is {\bf Yes} for non random-access devices. -\item [Forward Space File = {\it Yes|No}] +\item [Forward Space File = {\it yes\vb{}no}] \index[sd]{Forward Space File} \index[sd]{Directive!Forward Space File} If {\bf Yes}, the archive device must support the {\tt MTFSF ioctl} to forward space by file marks. If {\it No}, data must be read to advance the position on the device. Default is {\bf Yes} for non random-access devices. -\item [Offline On Unmount = {\it Yes|No}] +\item [Offline On Unmount = {\it yes\vb{}no}] \index[sd]{Offline On Unmount} \index[sd]{Directive!Offline On Unmount} The default for this directive is {\bf No}. If {\bf Yes} the archive device @@ -975,7 +975,7 @@ default, Bacula will only write one end of file to terminate the tape. {\bf Maximum Volume Bytes} directive in the Director's Pool resource, which does the same thing but on a Pool (Volume) basis. -\item [Block Positioning = {\it yes|no}] +\item [Block Positioning = {\it yes\vb{}no}] \index[sd]{Block Positioning} \index[sd]{Directive!Block Positioning} This directive tells Bacula not to use block positioning when doing restores. @@ -1078,7 +1078,7 @@ apply to removable filesystems such as USB in addition to DVD. \begin{description} -\item [Requires Mount = {\it Yes|No}] +\item [Requires Mount = {\it yes\vb{}no}] \index[sd]{Requires Mount} \index[sd]{Directive!Requires Mount} You must set this directive to {\bf yes} for DVD-writers, and to {\bf no} for @@ -1218,7 +1218,7 @@ Similar consideration should be given to all other Command parameters. \begin{description} -\item [Label media = {\it Yes|No}] +\item [Label media = {\it yes\vb{}no}] \index[sd]{Label media} \index[sd]{Directive!Label media} If {\bf Yes}, permits this device to automatically label blank media @@ -1229,7 +1229,7 @@ Similar consideration should be given to all other Command parameters. when the tape has been recycled. The automatic labeling feature is most useful when writing to disk rather than tape volumes. -\item [Automatic mount = {\it Yes|No}] +\item [Automatic mount = {\it yes\vb{}no}] \index[sd]{Automatic mount} \index[sd]{Directive!Automatic mount} If {\bf Yes} (the default), permits the daemon to examine the device to