From: Ed Swarthout Date: Wed, 11 Jul 2007 19:52:08 +0000 (-0500) Subject: pciauto setup bridge X-Git-Tag: v1.3.0-rc1~19^2~20^2~18^2~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e8b85f3ba4cd8930e0a2fea2100c815d64201765;p=u-boot pciauto setup bridge The P2P bridge bus numbers programmed into the device are relative to hose->first_busno. Signed-off-by: Ed Swarthout --- diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 9fa18e5427..f16f8d3c84 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -165,8 +165,10 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); /* Configure bus number registers */ - pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev)); - pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus); + pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, + PCI_BUS(dev) - hose->first_busno); + pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, + sub_bus - hose->first_busno); pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff); if (pci_mem) { @@ -219,7 +221,8 @@ void pciauto_postscan_setup_bridge(struct pci_controller *hose, struct pci_region *pci_io = hose->pci_io; /* Configure bus number registers */ - pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus); + pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, + sub_bus - hose->first_busno); if (pci_mem) { /* Round memory allocator to 1MB boundary */