From: Randall Spangler Date: Thu, 27 Feb 2014 20:26:08 +0000 (-0700) Subject: cros_ec: Clean up multiple EC protocol support X-Git-Tag: v2014.04-rc3~44 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e8c12662364fbcf5ea917d341f707534c8574900;p=u-boot cros_ec: Clean up multiple EC protocol support Version 1 protocols (without command version) were already no longer supported in cros_ec.c. This removes some dead code from the cros_ec_i2c driver. Version 2 protcols (with command version) are now called protocol_version=2, instead of cmd_version_is_supported=1. A subsequent change will introduce protocol version 3 for SPI. Reviewed-by: Simon Glass Signed-off-by: Randall Spangler Signed-off-by: Simon Glass --- diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c index ff46762dde..33b9390d3e 100644 --- a/drivers/misc/cros_ec.c +++ b/drivers/misc/cros_ec.c @@ -501,18 +501,23 @@ static int cros_ec_check_version(struct cros_ec_dev *dev) * * So for now, just read all the data anyway. */ - dev->cmd_version_is_supported = 1; + + /* Try sending a version 2 packet */ + dev->protocol_version = 2; if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req), (uint8_t **)&resp, sizeof(*resp)) > 0) { - /* It appears to understand new version commands */ - dev->cmd_version_is_supported = 1; - } else { - printf("%s: ERROR: old EC interface not supported\n", - __func__); - return -1; + return 0; } - return 0; + /* + * Fail if we're still here, since the EC doesn't understand any + * protcol version we speak. Version 1 interface without command + * version is no longer supported, and we don't know about any new + * protocol versions. + */ + dev->protocol_version = 0; + printf("%s: ERROR: old EC interface not supported\n", __func__); + return -1; } int cros_ec_test(struct cros_ec_dev *dev) diff --git a/drivers/misc/cros_ec_i2c.c b/drivers/misc/cros_ec_i2c.c index 0fbab991b5..513cdb1cb0 100644 --- a/drivers/misc/cros_ec_i2c.c +++ b/drivers/misc/cros_ec_i2c.c @@ -35,7 +35,7 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, uint8_t *ptr; /* Receive input data, so that args will be dword aligned */ uint8_t *in_ptr; - int ret; + int len, csum, ret; old_bus = i2c_get_bus_num(); @@ -67,24 +67,24 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, * will be dword aligned. */ in_ptr = dev->din + sizeof(int64_t); - if (!dev->cmd_version_is_supported) { - /* Send an old-style command */ - *ptr++ = cmd; - out_bytes = dout_len + 1; - in_bytes = din_len + 2; - in_ptr--; /* Expect just a status byte */ - } else { - *ptr++ = EC_CMD_VERSION0 + cmd_version; - *ptr++ = cmd; - *ptr++ = dout_len; - in_ptr -= 2; /* Expect status, length bytes */ + + if (dev->protocol_version != 2) { + /* Something we don't support */ + debug("%s: Protocol version %d unsupported\n", + __func__, dev->protocol_version); + return -1; } + + *ptr++ = EC_CMD_VERSION0 + cmd_version; + *ptr++ = cmd; + *ptr++ = dout_len; + in_ptr -= 2; /* Expect status, length bytes */ + memcpy(ptr, dout, dout_len); ptr += dout_len; - if (dev->cmd_version_is_supported) - *ptr++ = (uint8_t) - cros_ec_calc_checksum(dev->dout, dout_len + 3); + *ptr++ = (uint8_t) + cros_ec_calc_checksum(dev->dout, dout_len + 3); /* Set to the proper i2c bus */ if (i2c_set_bus_num(dev->bus_num)) { @@ -121,26 +121,20 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, return -(int)*in_ptr; } - if (dev->cmd_version_is_supported) { - int len, csum; - - len = in_ptr[1]; - if (len + 3 > sizeof(dev->din)) { - debug("%s: Received length %#02x too large\n", - __func__, len); - return -1; - } - csum = cros_ec_calc_checksum(in_ptr, 2 + len); - if (csum != in_ptr[2 + len]) { - debug("%s: Invalid checksum rx %#02x, calced %#02x\n", - __func__, in_ptr[2 + din_len], csum); - return -1; - } - din_len = min(din_len, len); - cros_ec_dump_data("in", -1, in_ptr, din_len + 3); - } else { - cros_ec_dump_data("in (old)", -1, in_ptr, in_bytes); + len = in_ptr[1]; + if (len + 3 > sizeof(dev->din)) { + debug("%s: Received length %#02x too large\n", + __func__, len); + return -1; } + csum = cros_ec_calc_checksum(in_ptr, 2 + len); + if (csum != in_ptr[2 + len]) { + debug("%s: Invalid checksum rx %#02x, calced %#02x\n", + __func__, in_ptr[2 + din_len], csum); + return -1; + } + din_len = min(din_len, len); + cros_ec_dump_data("in", -1, in_ptr, din_len + 3); /* Return pointer to dword-aligned input data, if any */ *dinp = dev->din + sizeof(int64_t); @@ -178,7 +172,5 @@ int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob) { i2c_init(dev->max_frequency, dev->addr); - dev->cmd_version_is_supported = 0; - return 0; } diff --git a/drivers/misc/cros_ec_spi.c b/drivers/misc/cros_ec_spi.c index 2fc911025e..ef73782606 100644 --- a/drivers/misc/cros_ec_spi.c +++ b/drivers/misc/cros_ec_spi.c @@ -42,6 +42,12 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, int csum, len; int rv; + if (dev->protocol_version != 2) { + debug("%s: Unsupported EC protcol version %d\n", + __func__, dev->protocol_version); + return -1; + } + /* * Sanity-check input size to make sure it plus transaction overhead * fits in the internal device buffer. diff --git a/include/cros_ec.h b/include/cros_ec.h index 31661329fd..1199d92335 100644 --- a/include/cros_ec.h +++ b/include/cros_ec.h @@ -33,7 +33,7 @@ struct cros_ec_dev { unsigned int bus_num; /* Bus number (for I2C) */ unsigned int max_frequency; /* Maximum interface frequency */ struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */ - int cmd_version_is_supported; /* Device supports command versions */ + int protocol_version; /* Protocol version to use */ int optimise_flash_write; /* Don't write erased flash blocks */ /* @@ -260,8 +260,7 @@ int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob); * Check whether the LPC interface supports new-style commands. * * LPC has its own way of doing this, which involves checking LPC values - * visible to the host. Do this, and update dev->cmd_version_is_supported - * accordingly. + * visible to the host. Do this, and update dev->protocol_version accordingly. * * @param dev CROS-EC device to check */