From: Haiying Wang <Haiying.Wang@freescale.com>
Date: Thu, 4 Jun 2009 20:12:42 +0000 (-0400)
Subject: drivers/qe: add sgmii support in for UEC driver
X-Git-Tag: v2009.08-rc1~153^2~7
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e8efef7c1b457442583a8b9d38d8a5b667661616;p=u-boot

drivers/qe: add sgmii support in for UEC driver

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 0b4a6e7c47..3686575a0e 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -379,6 +379,10 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 			upsmr |= (UPSMR_R10M | UPSMR_RMM);
 			break;
+		case ENET_1000_SGMII:
+			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+			upsmr |= UPSMR_SGMM;
+			break;
 		default:
 			return -EINVAL;
 			break;
@@ -1078,6 +1082,18 @@ static int uec_startup(uec_private_t *uec)
 
 	out_be32(&uec_regs->utbipar, utbipar);
 
+	/* Configure the TBI for SGMII operation */
+	if (uec->uec_info->enet_interface == ENET_1000_SGMII) {
+		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
+			ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
+			ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
+			ENET_TBI_MII_CR, TBICR_SETTINGS);
+	}
+
 	/* Allocate Tx BDs */
 	length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
 		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
@@ -1333,6 +1349,7 @@ int uec_initialize(bd_t *bis, uec_info_t *uec_info)
 	devlist[uec_info->uf_info.ucc_num] = dev;
 
 	uec->uec_info = uec_info;
+	uec->dev = dev;
 
 	sprintf(dev->name, "FSL UEC%d", uec_info->uf_info.ucc_num);
 	dev->iobase = 0;
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 6c408d102c..1568310090 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
  *
  * Dave Liu <daveliu@freescale.com>
  * based on source code of Shlomi Gridish
@@ -47,6 +47,7 @@
 #define UPSMR_CAM	0x00000400 /* CAM Address Matching          */
 #define UPSMR_BRO	0x00000200 /* Broadcast Address             */
 #define UPSMR_RES1	0x00002000 /* Reserved feild - must be 1    */
+#define UPSMR_SGMM	0x00000020 /* SGMII mode    */
 
 #define UPSMR_INIT_VALUE	(UPSMR_HSE | UPSMR_RES1)
 
@@ -621,6 +622,31 @@ typedef enum enet_tbi_mii_reg {
 	ENET_TBI_MII_TBICON    = 0x11
 } enet_tbi_mii_reg_e;
 
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT	0x0020
+#define TBIANA_ASYMMETRIC_PAUSE	0x0100
+#define TBIANA_SYMMETRIC_PAUSE	0x0080
+#define TBIANA_HALF_DUPLEX	0x0040
+#define TBIANA_FULL_DUPLEX	0x0020
+#define TBICR_PHY_RESET		0x8000
+#define TBICR_ANEG_ENABLE	0x1000
+#define TBICR_RESTART_ANEG	0x0200
+#define TBICR_FULL_DUPLEX	0x0100
+#define TBICR_SPEED1_SET	0x0040
+
+#define TBIANA_SETTINGS ( \
+		TBIANA_ASYMMETRIC_PAUSE \
+		| TBIANA_SYMMETRIC_PAUSE \
+		| TBIANA_FULL_DUPLEX \
+		)
+
+#define TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 /* UEC number of threads
 */
 typedef enum uec_num_of_threads {
@@ -645,7 +671,8 @@ typedef enum enet_interface {
 	ENET_1000_RGMII_ID,
 	ENET_1000_RGMII_RXID,
 	ENET_1000_TBI,
-	ENET_1000_RTBI
+	ENET_1000_RTBI,
+	ENET_1000_SGMII
 } enet_interface_e;
 
 /* UEC initialization info struct