From: javier Martin Date: Thu, 29 Oct 2009 07:18:34 +0000 (+0100) Subject: mxc_fec: fix some erroneous PHY accesses. X-Git-Tag: v2009.11-rc2~60^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e8f1546a88b4ade6a910c4a7958a774ee1b40023;p=u-boot mxc_fec: fix some erroneous PHY accesses. This patch fixes erroneous access to the ethernet PHY which broke the driver. 1. Selector field in the auto-negotiation register must be 0x00001 for using 802.3, not 0x00000 which is reseved. 2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not 0x0 fixed address. This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. Now using proper defines for auto-negotiation register. Signed-off-by: Javier Martin Signed-off-by: Ben Warren --- diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index bd83a249ee..9764e12126 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -157,7 +157,9 @@ static int miiphy_restart_aneg(struct eth_device *dev) /* * Set the auto-negotiation advertisement register bits */ - miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR, 0x1e0); + miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR, + PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD | + PHY_ANLPAR_10 | PHY_ANLPAR_PSB_802_3); miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); @@ -341,8 +343,8 @@ static int fec_open(struct eth_device *edev) writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); miiphy_wait_aneg(edev); - miiphy_speed(edev->name, 0); - miiphy_duplex(edev->name, 0); + miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR); + miiphy_duplex(edev->name, CONFIG_FEC_MXC_PHYADDR); /* * Enable SmartDMA receive task