From: Shaohui Xie Date: Mon, 23 Nov 2015 07:23:48 +0000 (+0800) Subject: armv8/ls1043ardb: Add support for >2GB memory X-Git-Tag: v2016.01-rc3~23^2~19 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e994dddbbe031c818758b2ea91f59697b07d94b6;p=u-boot armv8/ls1043ardb: Add support for >2GB memory This patch also expose the complete DDR region(s) to Linux. Signed-off-by: Shaohui Xie Signed-off-by: Mingkai Hu Reviewed-by: York Sun --- diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index b5a2d28c08..7217a87502 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -126,8 +126,8 @@ #define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */ #define CONFIG_SYS_FSL_OCRAM_SIZE 0x200000 /* 2 MiB */ #define CONFIG_SYS_FSL_DDR_BE -#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE +#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE #define CONFIG_SYS_FSL_CCSR_GUR_BE #define CONFIG_SYS_FSL_CCSR_SCFG_BE diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index b181579e8e..249d0565fc 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -187,5 +187,12 @@ phys_size_t initdram(int board_type) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; + if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + gd->bd->bi_dram[1].size = gd->ram_size - + CONFIG_SYS_DDR_BLOCK1_SIZE; + } else { + gd->bd->bi_dram[0].size = gd->ram_size; + } } diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index cdd50d6d18..4556ea8ad1 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -130,6 +130,16 @@ int misc_init_r(void) int ft_board_setup(void *blob, bd_t *bd) { + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + /* fixup DT for the two DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); ft_cpu_setup(blob, bd); #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 6b9856a18f..677d28113c 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -44,6 +44,7 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL #define CPU_RELEASE_ADDR secondary_boot_func diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 7d113a0737..683407499a 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -27,7 +27,7 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_SYS_SPD_BUS_NUM 0