From: Bohdan Tymkiv Date: Mon, 25 Sep 2017 11:25:22 +0000 (+0300) Subject: Add support for Cypress PSoC6 family of devices X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=e9f54db0033ad1f98a5a8e8168113e74a2d21ee8;p=openocd Add support for Cypress PSoC6 family of devices * Tested on CY8CKIT-001 kit with PSoC6 daughter board. * Tested with several J-Link adapters (Ultra+, Basic) Change-Id: I0a818c231e5f0b270c7774037b38d23221d59417 Signed-off-by: Bohdan Tymkiv Reviewed-on: http://openocd.zylin.com/4233 Tested-by: jenkins Reviewed-by: Tomas Vanek --- diff --git a/doc/openocd.texi b/doc/openocd.texi index 898ffb94..a6f220f4 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5891,6 +5891,62 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @end deffn +@deffn {Flash Driver} psoc6 +Supports PSoC6 (CY8C6xxx) family of Cypress microcontrollers. +PSoC6 is a dual-core device with CM0+ and CM4 cores. Both cores share +the same Flash/RAM/MMIO address space. + +Flash in PSoC6 is split into three regions: +@itemize @bullet +@item Main Flash - this is the main storage for user application. +Total size varies among devices, sector size: 256 kBytes, row size: +512 bytes. Supports erase operation on individual rows. +@item Work Flash - intended to be used as storage for user data +(e.g. EEPROM emulation). Total size: 32 KBytes, sector size: 32 KBytes, +row size: 512 bytes. +@item Supervisory Flash - special region which contains device-specific +service data. This region does not support erase operation. Only few rows can +be programmed by the user, most of the rows are read only. Programming +operation will erase row automatically. +@end itemize + +All three flash regions are supported by the driver. Flash geometry is detected +automatically by parsing data in SPCIF_GEOMETRY register. + +PSoC6 is equipped with NOR Flash so erased Flash reads as 0x00. + +@example +flash bank main_flash_cm0 psoc6 0x10000000 0 0 0 $@{TARGET@}.cm0 +flash bank work_flash_cm0 psoc6 0x14000000 0 0 0 $@{TARGET@}.cm0 +flash bank super_flash_user_cm0 psoc6 0x16000800 0 0 0 $@{TARGET@}.cm0 +flash bank super_flash_nar_cm0 psoc6 0x16001A00 0 0 0 $@{TARGET@}.cm0 +flash bank super_flash_key_cm0 psoc6 0x16005A00 0 0 0 $@{TARGET@}.cm0 +flash bank super_flash_toc2_cm0 psoc6 0x16007C00 0 0 0 $@{TARGET@}.cm0 + +flash bank main_flash_cm4 psoc6 0x10000000 0 0 0 $@{TARGET@}.cm4 +flash bank work_flash_cm4 psoc6 0x14000000 0 0 0 $@{TARGET@}.cm4 +flash bank super_flash_user_cm4 psoc6 0x16000800 0 0 0 $@{TARGET@}.cm4 +flash bank super_flash_nar_cm4 psoc6 0x16001A00 0 0 0 $@{TARGET@}.cm4 +flash bank super_flash_key_cm4 psoc6 0x16005A00 0 0 0 $@{TARGET@}.cm4 +flash bank super_flash_toc2_cm4 psoc6 0x16007C00 0 0 0 $@{TARGET@}.cm4 +@end example + +psoc6-specific commands +@deffn Command {psoc6 reset_halt} +Command can be used to simulate broken Vector Catch from gdbinit or tcl scripts. +When invoked for CM0+ target, it will set break point at application entry point +and issue SYSRESETREQ. This will reset both cores and all peripherals. CM0+ will +reset CM4 during boot anyway so this is safe. On CM4 target, VECTRESET is used +instead of SYSRESETREQ to avoid unwanted reset of CM0+; +@end deffn + +@deffn Command {psoc6 mass_erase} num +Erases the contents given flash bank. The @var{num} parameter is a value shown +by @command{flash banks}. +Note: only Main and Work flash regions support Erase operation. +@end deffn +@end deffn + @deffn {Flash Driver} sim3x All members of the SiM3 microcontroller family from Silicon Laboratories include internal flash and use ARM Cortex-M3 cores. It supports both JTAG diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index 6dc61e62..4b74a468 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -41,6 +41,7 @@ NOR_DRIVERS = \ %D%/ocl.c \ %D%/pic32mx.c \ %D%/psoc4.c \ + %D%/psoc6.c \ %D%/sim3x.c \ %D%/spi.c \ %D%/stmsmi.c \ diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index 3b055d19..0e6a7382 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -54,6 +54,7 @@ extern struct flash_driver numicro_flash; extern struct flash_driver ocl_flash; extern struct flash_driver pic32mx_flash; extern struct flash_driver psoc4_flash; +extern struct flash_driver psoc6_flash; extern struct flash_driver sim3x_flash; extern struct flash_driver stellaris_flash; extern struct flash_driver stm32f1x_flash; @@ -110,6 +111,7 @@ static struct flash_driver *flash_drivers[] = { &ocl_flash, &pic32mx_flash, &psoc4_flash, + &psoc6_flash, &sim3x_flash, &stellaris_flash, &stm32f1x_flash, diff --git a/src/flash/nor/psoc6.c b/src/flash/nor/psoc6.c new file mode 100644 index 00000000..259d6679 --- /dev/null +++ b/src/flash/nor/psoc6.c @@ -0,0 +1,985 @@ +/*************************************************************************** + * * + * Copyright (C) 2017 by Bohdan Tymkiv * + * bohdan.tymkiv@cypress.com bohdan200@gmail.com * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see . * + ***************************************************************************/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include + +#include "imp.h" +#include "target/target.h" +#include "target/cortex_m.h" +#include "target/breakpoints.h" +#include "target/target_type.h" +#include "time_support.h" +#include "target/algorithm.h" + +/************************************************************************************************** + * PSoC6 device definitions + *************************************************************************************************/ +#define MFLASH_SECTOR_SIZE (256u * 1024u) +#define WFLASH_SECTOR_SIZE (32u * 1024u) + +#define MEM_BASE_MFLASH 0x10000000u +#define MEM_BASE_WFLASH 0x14000000u +#define MEM_WFLASH_SIZE 32768u +#define MEM_BASE_SFLASH 0x16000000u +#define RAM_STACK_WA_SIZE 2048u +#define PSOC6_SPCIF_GEOMETRY 0x4025F00Cu + +#define PROTECTION_UNKNOWN 0x00u +#define PROTECTION_VIRGIN 0x01u +#define PROTECTION_NORMAL 0x02u +#define PROTECTION_SECURE 0x03u +#define PROTECTION_DEAD 0x04u + +#define MEM_BASE_IPC 0x40230000u +#define IPC_STRUCT_SIZE 0x20u +#define MEM_IPC(n) (MEM_BASE_IPC + (n) * IPC_STRUCT_SIZE) +#define MEM_IPC_ACQUIRE(n) (MEM_IPC(n) + 0x00u) +#define MEM_IPC_NOTIFY(n) (MEM_IPC(n) + 0x08u) +#define MEM_IPC_DATA(n) (MEM_IPC(n) + 0x0Cu) +#define MEM_IPC_LOCK_STATUS(n) (MEM_IPC(n) + 0x10u) + +#define MEM_BASE_IPC_INTR 0x40231000u +#define IPC_INTR_STRUCT_SIZE 0x20u +#define MEM_IPC_INTR(n) (MEM_BASE_IPC_INTR + (n) * IPC_INTR_STRUCT_SIZE) +#define MEM_IPC_INTR_MASK(n) (MEM_IPC_INTR(n) + 0x08u) +#define IPC_ACQUIRE_SUCCESS_MSK 0x80000000u +#define IPC_LOCK_ACQUIRED_MSK 0x80000000u + +#define IPC_ID 2u +#define IPC_INTR_ID 0u +#define IPC_TIMEOUT_MS 1000 + +#define SROMAPI_SIID_REQ 0x00000001u +#define SROMAPI_SIID_REQ_FAMILY_REVISION (SROMAPI_SIID_REQ | 0x000u) +#define SROMAPI_SIID_REQ_SIID_PROTECTION (SROMAPI_SIID_REQ | 0x100u) +#define SROMAPI_WRITEROW_REQ 0x05000100u +#define SROMAPI_PROGRAMROW_REQ 0x06000100u +#define SROMAPI_ERASESECTOR_REQ 0x14000100u +#define SROMAPI_ERASEALL_REQ 0x0A000100u +#define SROMAPI_ERASEROW_REQ 0x1C000100u + +#define SROMAPI_STATUS_MSK 0xF0000000u +#define SROMAPI_STAT_SUCCESS 0xA0000000u +#define SROMAPI_DATA_LOCATION_MSK 0x00000001u +#define SROMAPI_CALL_TIMEOUT_MS 1500 + +struct psoc6_target_info { + uint32_t silicon_id; + uint8_t protection; + uint32_t main_flash_sz; + uint32_t row_sz; + bool is_probed; +}; + +struct timeout { + int64_t start_time; + long timeout_ms; +}; + +struct row_region { + uint32_t addr; + size_t size; +}; + +static struct row_region safe_sflash_regions[] = { + {0x16000800, 0x800}, /* SFLASH: User Data */ + {0x16001A00, 0x200}, /* SFLASH: NAR */ + {0x16005A00, 0xC00}, /* SFLASH: Public Key */ + {0x16007C00, 0x400}, /* SFLASH: TOC2 */ +}; + +#define SFLASH_NUM_REGIONS (sizeof(safe_sflash_regions) / sizeof(safe_sflash_regions[0])) + +static struct working_area *g_stack_area; +/************************************************************************************************** + * Initializes timeout_s structure with given timeout in milliseconds + *************************************************************************************************/ +static void timeout_init(struct timeout *to, long timeout_ms) +{ + to->start_time = timeval_ms(); + to->timeout_ms = timeout_ms; +} + +/************************************************************************************************** + * Returns true if given timeout_s object has expired + *************************************************************************************************/ +static bool timeout_expired(struct timeout *to) +{ + return (timeval_ms() - to->start_time) > to->timeout_ms; +} + +/************************************************************************************************** + * Prepares PSoC6 for running pseudo flash algorithm. This function allocates Working Area for + * the algorithm and for CPU Stack. + *************************************************************************************************/ +static int sromalgo_prepare(struct target *target) +{ + int hr; + + /* Initialize Vector Table Offset register (in case FW modified it) */ + hr = target_write_u32(target, 0xE000ED08, 0x00000000); + if (hr != ERROR_OK) + return hr; + + /* Allocate Working Area for Stack and Flash algorithm */ + hr = target_alloc_working_area(target, RAM_STACK_WA_SIZE, &g_stack_area); + if (hr != ERROR_OK) + return hr; + + /* Restore THUMB bit in xPSR register */ + const struct armv7m_common *cm = target_to_armv7m(target); + hr = cm->store_core_reg_u32(target, ARMV7M_xPSR, 0x01000000); + if (hr != ERROR_OK) + goto exit_free_wa; + + return ERROR_OK; + +exit_free_wa: + /* Something went wrong, free allocated area */ + if (g_stack_area) { + target_free_working_area(target, g_stack_area); + g_stack_area = NULL; + } + + return hr; +} + +/************************************************************************************************** + * Releases working area + *************************************************************************************************/ +static int sromalgo_release(struct target *target) +{ + int hr = ERROR_OK; + + /* Free Stack/Flash algorithm working area */ + if (g_stack_area) { + hr = target_free_working_area(target, g_stack_area); + g_stack_area = NULL; + } + + return hr; +} + +/************************************************************************************************** + * Runs pseudo flash algorithm. Algorithm itself consist of couple of NOPs followed by BKPT + * instruction. The trick here is that NMI has already been posted to CM0 via IPC structure + * prior to calling this function. CM0 will immediately jump to NMI handler and execute + * SROM API code. + * This approach is borrowed from PSoC4 Flash Driver. + *************************************************************************************************/ +static int sromalgo_run(struct target *target) +{ + int hr; + + struct armv7m_algorithm armv7m_info; + armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; + armv7m_info.core_mode = ARM_MODE_THREAD; + + struct reg_param reg_params; + init_reg_param(®_params, "sp", 32, PARAM_OUT); + buf_set_u32(reg_params.value, 0, 32, g_stack_area->address + g_stack_area->size); + + /* mov r8, r8; mov r8, r8 */ + hr = target_write_u32(target, g_stack_area->address + 0, 0x46C046C0); + if (hr != ERROR_OK) + return hr; + + /* mov r8, r8; bkpt #0 */ + hr = target_write_u32(target, g_stack_area->address + 4, 0xBE0046C0); + if (hr != ERROR_OK) + return hr; + + hr = target_run_algorithm(target, 0, NULL, 1, ®_params, g_stack_area->address, + 0, SROMAPI_CALL_TIMEOUT_MS, &armv7m_info); + + destroy_reg_param(®_params); + + return hr; +} + +/************************************************************************************************** + * Waits for expected IPC lock status. + * PSoC6 uses IPC structures for inter-core communication. Same IPCs are used to invoke SROM API. + * IPC structure must be locked prior to invoking any SROM API. This ensures nothing else in the + * system will use same IPC thus corrupting our data. Locking is performed by ipc_acquire(), this + * function ensures that IPC is actually in expected state + *************************************************************************************************/ +static int ipc_poll_lock_stat(struct target *target, uint32_t ipc_id, bool lock_expected) +{ + int hr; + uint32_t reg_val; + + struct timeout to; + timeout_init(&to, IPC_TIMEOUT_MS); + + while (!timeout_expired(&to)) { + /* Process any server requests */ + keep_alive(); + + /* Read IPC Lock status */ + hr = target_read_u32(target, MEM_IPC_LOCK_STATUS(ipc_id), ®_val); + if (hr != ERROR_OK) { + LOG_ERROR("Unable to read IPC Lock Status register"); + return hr; + } + + bool is_locked = (reg_val & IPC_LOCK_ACQUIRED_MSK) != 0; + + if (lock_expected == is_locked) + return ERROR_OK; + } + + if (target->coreid) { + LOG_WARNING("SROM API calls via CM4 target are supported on single-core PSoC6 devices only. " + "Please perform all Flash-related operations via CM0+ target on dual-core devices."); + } + + LOG_ERROR("Timeout polling IPC Lock Status"); + return ERROR_TARGET_TIMEOUT; +} + +/************************************************************************************************** + * Acquires IPC structure + * PSoC6 uses IPC structures for inter-core communication. Same IPCs are used to invoke SROM API. + * IPC structure must be locked prior to invoking any SROM API. This ensures nothing else in the + * system will use same IPC thus corrupting our data. This function locks the IPC. + *************************************************************************************************/ +static int ipc_acquire(struct target *target, char ipc_id) +{ + int hr = ERROR_OK; + bool is_acquired = false; + uint32_t reg_val; + + struct timeout to; + timeout_init(&to, IPC_TIMEOUT_MS); + + while (!timeout_expired(&to)) { + keep_alive(); + + hr = target_write_u32(target, MEM_IPC_ACQUIRE(ipc_id), IPC_ACQUIRE_SUCCESS_MSK); + if (hr != ERROR_OK) { + LOG_ERROR("Unable to write to IPC Acquire register"); + return hr; + } + + /* Check if data is written on first step */ + hr = target_read_u32(target, MEM_IPC_ACQUIRE(ipc_id), ®_val); + if (hr != ERROR_OK) { + LOG_ERROR("Unable to read IPC Acquire register"); + return hr; + } + + is_acquired = (reg_val & IPC_ACQUIRE_SUCCESS_MSK) != 0; + if (is_acquired) { + /* If IPC structure is acquired, the lock status should be set */ + hr = ipc_poll_lock_stat(target, ipc_id, true); + break; + } + } + + if (!is_acquired) + LOG_ERROR("Timeout acquiring IPC structure"); + + return hr; +} + +/************************************************************************************************** + * Invokes SROM API functions which are responsible for Flash operations + *************************************************************************************************/ +static int call_sromapi(struct target *target, + uint32_t req_and_params, + uint32_t working_area, + uint32_t *data_out) +{ + int hr; + + bool is_data_in_ram = (req_and_params & SROMAPI_DATA_LOCATION_MSK) == 0; + + hr = ipc_acquire(target, IPC_ID); + if (hr != ERROR_OK) + return hr; + + if (is_data_in_ram) + hr = target_write_u32(target, MEM_IPC_DATA(IPC_ID), working_area); + else + hr = target_write_u32(target, MEM_IPC_DATA(IPC_ID), req_and_params); + + if (hr != ERROR_OK) + return hr; + + /* Enable notification interrupt of IPC_INTR_STRUCT0(CM0+) for IPC_STRUCT2 */ + hr = target_write_u32(target, MEM_IPC_INTR_MASK(IPC_INTR_ID), 1u << (16 + IPC_ID)); + if (hr != ERROR_OK) + return hr; + + hr = target_write_u32(target, MEM_IPC_NOTIFY(IPC_ID), 1); + if (hr != ERROR_OK) + return hr; + + hr = sromalgo_run(target); + if (hr != ERROR_OK) + return hr; + + /* Poll lock status */ + hr = ipc_poll_lock_stat(target, IPC_ID, false); + if (hr != ERROR_OK) + return hr; + + /* Poll Data byte */ + if (is_data_in_ram) + hr = target_read_u32(target, working_area, data_out); + else + hr = target_read_u32(target, MEM_IPC_DATA(IPC_ID), data_out); + + if (hr != ERROR_OK) { + LOG_ERROR("Error reading SROM API Status location"); + return hr; + } + + bool is_success = (*data_out & SROMAPI_STATUS_MSK) == SROMAPI_STAT_SUCCESS; + if (!is_success) { + LOG_ERROR("SROM API execution failed. Status: 0x%08X", (uint32_t)*data_out); + return ERROR_TARGET_FAILURE; + } + + return ERROR_OK; +} + +/************************************************************************************************** + * Retrieves SiliconID and Protection status of the target device + *************************************************************************************************/ +static int get_silicon_id(struct target *target, uint32_t *si_id, uint8_t *protection) +{ + int hr; + uint32_t family_rev, siid_prot; + + hr = sromalgo_prepare(target); + if (hr != ERROR_OK) + return hr; + + /* Read FamilyID and Revision */ + hr = call_sromapi(target, SROMAPI_SIID_REQ_FAMILY_REVISION, 0, &family_rev); + if (hr != ERROR_OK) + return hr; + + /* Read SiliconID and Protection */ + hr = call_sromapi(target, SROMAPI_SIID_REQ_SIID_PROTECTION, 0, &siid_prot); + if (hr != ERROR_OK) + return hr; + + *si_id = (siid_prot & 0x0000FFFF) << 16; + *si_id |= (family_rev & 0x00FF0000) >> 8; + *si_id |= (family_rev & 0x000000FF) >> 0; + + *protection = (siid_prot & 0x000F0000) >> 0x10; + + hr = sromalgo_release(target); + return hr; +} + +/************************************************************************************************** + * Translates Protection status to openocd-friendly boolean value + *************************************************************************************************/ +static int psoc6_protect_check(struct flash_bank *bank) +{ + int is_protected; + + struct psoc6_target_info *psoc6_info = bank->driver_priv; + int hr = get_silicon_id(bank->target, &psoc6_info->silicon_id, &psoc6_info->protection); + if (hr != ERROR_OK) + return hr; + + switch (psoc6_info->protection) { + case PROTECTION_VIRGIN: + case PROTECTION_NORMAL: + is_protected = 0; + break; + + case PROTECTION_UNKNOWN: + case PROTECTION_SECURE: + case PROTECTION_DEAD: + default: + is_protected = 1; + break; + } + + for (int i = 0; i < bank->num_sectors; i++) + bank->sectors[i].is_protected = is_protected; + + return ERROR_OK; +} + +/************************************************************************************************** + * Life Cycle transition is not currently supported + *************************************************************************************************/ +static int psoc6_protect(struct flash_bank *bank, int set, int first, int last) +{ + (void)bank; + (void)set; + (void)first; + (void)last; + + LOG_WARNING("Life Cycle transition for PSoC6 is not supported"); + return ERROR_OK; +} + +/************************************************************************************************** + * Translates Protection status to string + *************************************************************************************************/ +static const char *protection_to_str(uint8_t protection) +{ + switch (protection) { + case PROTECTION_VIRGIN: + return "VIRGIN"; + break; + case PROTECTION_NORMAL: + return "NORMAL"; + break; + case PROTECTION_SECURE: + return "SECURE"; + break; + case PROTECTION_DEAD: + return "DEAD"; + break; + case PROTECTION_UNKNOWN: + default: + return "UNKNOWN"; + break; + } +} + +/************************************************************************************************** + * Displays human-readable information about acquired device + *************************************************************************************************/ +static int psoc6_get_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct psoc6_target_info *psoc6_info = bank->driver_priv; + + if (psoc6_info->is_probed == false) + return ERROR_FAIL; + + int hr = get_silicon_id(bank->target, &psoc6_info->silicon_id, &psoc6_info->protection); + if (hr != ERROR_OK) + return hr; + + snprintf(buf, buf_size, + "PSoC6 Silicon ID: 0x%08X\n" + "Protection: %s\n" + "Main Flash size: %d kB\n" + "Work Flash size: 32 kB\n", + psoc6_info->silicon_id, + protection_to_str(psoc6_info->protection), + psoc6_info->main_flash_sz / 1024); + + return ERROR_OK; +} + +/************************************************************************************************** + * Returns true if flash bank name represents Supervisory Flash + *************************************************************************************************/ +static bool is_sflash_bank(struct flash_bank *bank) +{ + for (size_t i = 0; i < SFLASH_NUM_REGIONS; i++) { + if (bank->base == safe_sflash_regions[i].addr) + return true; + } + + return false; +} + +/************************************************************************************************** + * Returns true if flash bank name represents Work Flash + *************************************************************************************************/ +static inline bool is_wflash_bank(struct flash_bank *bank) +{ + return (bank->base == MEM_BASE_WFLASH); +} + +/************************************************************************************************** + * Returns true if flash bank name represents Main Flash + *************************************************************************************************/ +static inline bool is_mflash_bank(struct flash_bank *bank) +{ + return (bank->base == MEM_BASE_MFLASH); +} + +/************************************************************************************************** + * Probes the device and populates related data structures with target flash geometry data. + * This is done in non-intrusive way, no SROM API calls are involved so GDB can safely attach to a + * running target. + * Function assumes that size of Work Flash is 32kB (true for all current part numbers) + *************************************************************************************************/ +static int psoc6_probe(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct psoc6_target_info *psoc6_info = bank->driver_priv; + + int hr = ERROR_OK; + + /* Retrieve data from SPCIF_GEOMATRY */ + uint32_t geom; + target_read_u32(target, PSOC6_SPCIF_GEOMETRY, &geom); + uint32_t row_sz_lg2 = (geom & 0xF0) >> 4; + uint32_t row_sz = (0x01 << row_sz_lg2); + uint32_t row_cnt = 1 + ((geom & 0x00FFFF00) >> 8); + uint32_t bank_cnt = 1 + ((geom & 0xFF000000) >> 24); + + /* Calculate size of Main Flash*/ + uint32_t flash_sz_bytes = bank_cnt * row_cnt * row_sz; + + if (bank->sectors) { + free(bank->sectors); + bank->sectors = NULL; + } + + size_t bank_size = 0; + + if (is_mflash_bank(bank)) + bank_size = flash_sz_bytes; + else if (is_wflash_bank(bank)) + bank_size = MEM_WFLASH_SIZE; + else if (is_sflash_bank(bank)) { + for (size_t i = 0; i < SFLASH_NUM_REGIONS; i++) { + if (safe_sflash_regions[i].addr == bank->base) { + bank_size = safe_sflash_regions[i].size; + break; + } + } + } + + if (bank_size == 0) { + LOG_ERROR("Invalid Flash Bank base address in config file"); + return ERROR_FLASH_BANK_INVALID; + } + + size_t num_sectors = bank_size / row_sz; + bank->size = bank_size; + bank->chip_width = 4; + bank->bus_width = 4; + bank->erased_value = 0; + bank->default_padded_value = 0; + + bank->num_sectors = num_sectors; + bank->sectors = calloc(num_sectors, sizeof(struct flash_sector)); + for (size_t i = 0; i < num_sectors; i++) { + bank->sectors[i].size = row_sz; + bank->sectors[i].offset = i * row_sz; + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = -1; + } + + psoc6_info->is_probed = true; + psoc6_info->main_flash_sz = flash_sz_bytes; + psoc6_info->row_sz = row_sz; + + return hr; +} + +/************************************************************************************************** + * Probes target device only if it hasn't been probed yet + *************************************************************************************************/ +static int psoc6_auto_probe(struct flash_bank *bank) +{ + struct psoc6_target_info *psoc6_info = bank->driver_priv; + int hr; + + if (psoc6_info->is_probed) + hr = ERROR_OK; + else + hr = psoc6_probe(bank); + + return hr; +} + +/************************************************************************************************** + * Erases single sector (256k) on target device + *************************************************************************************************/ +static int psoc6_erase_sector(struct flash_bank *bank, struct working_area *wa, uint32_t addr) +{ + struct target *target = bank->target; + + LOG_DEBUG("Erasing SECTOR @%08X", addr); + + int hr = target_write_u32(target, wa->address, SROMAPI_ERASESECTOR_REQ); + if (hr != ERROR_OK) + return hr; + + hr = target_write_u32(target, wa->address + 0x04, addr); + if (hr != ERROR_OK) + return hr; + + uint32_t data_out; + hr = call_sromapi(target, SROMAPI_ERASESECTOR_REQ, wa->address, &data_out); + if (hr != ERROR_OK) + LOG_ERROR("SECTOR @%08X not erased!", addr); + + return hr; +} + +/************************************************************************************************** + * Erases single row (512b) on target device + *************************************************************************************************/ +static int psoc6_erase_row(struct flash_bank *bank, struct working_area *wa, uint32_t addr) +{ + struct target *target = bank->target; + + LOG_DEBUG("Erasing ROW @%08X", addr); + + int hr = target_write_u32(target, wa->address, SROMAPI_ERASEROW_REQ); + if (hr != ERROR_OK) + return hr; + + hr = target_write_u32(target, wa->address + 0x04, addr); + if (hr != ERROR_OK) + return hr; + + uint32_t data_out; + hr = call_sromapi(target, SROMAPI_ERASEROW_REQ, wa->address, &data_out); + if (hr != ERROR_OK) + LOG_ERROR("ROW @%08X not erased!", addr); + + return hr; +} + +/************************************************************************************************** + * Performs Erase operation. + * Function will try to use biggest erase block possible to speedup the operation + *************************************************************************************************/ +static int psoc6_erase(struct flash_bank *bank, int first, int last) +{ + struct target *target = bank->target; + struct psoc6_target_info *psoc6_info = bank->driver_priv; + const uint32_t sector_size = is_wflash_bank(bank) ? WFLASH_SECTOR_SIZE : MFLASH_SECTOR_SIZE; + + int hr; + struct working_area *wa; + + if (is_sflash_bank(bank)) { + LOG_INFO("Erase operation on Supervisory Flash is not required, skipping"); + return ERROR_OK; + } + + hr = sromalgo_prepare(target); + if (hr != ERROR_OK) + return hr; + + hr = target_alloc_working_area(target, psoc6_info->row_sz + 32, &wa); + if (hr != ERROR_OK) + goto exit; + + /* Number of rows in single sector */ + const int rows_in_sector = sector_size / psoc6_info->row_sz; + + while (last >= first) { + /* Erase Sector if we are on sector boundary and erase size covers whole sector */ + if ((first % rows_in_sector) == 0 && + (last - first + 1) >= rows_in_sector) { + hr = psoc6_erase_sector(bank, wa, bank->base + first * psoc6_info->row_sz); + if (hr != ERROR_OK) + goto exit_free_wa; + + for (int i = first; i < first + rows_in_sector; i++) + bank->sectors[i].is_erased = 1; + + first += rows_in_sector; + } else { + /* Perform Row Erase otherwise */ + hr = psoc6_erase_row(bank, wa, bank->base + first * psoc6_info->row_sz); + if (hr != ERROR_OK) + goto exit_free_wa; + + bank->sectors[first].is_erased = 1; + first += 1; + } + } + +exit_free_wa: + target_free_working_area(target, wa); +exit: + sromalgo_release(target); + return hr; +} + + +/************************************************************************************************** + * Programs single Flash Row + *************************************************************************************************/ +static int psoc6_program_row(struct flash_bank *bank, + uint32_t addr, + const uint8_t *buffer, + bool is_sflash) +{ + struct target *target = bank->target; + struct psoc6_target_info *psoc6_info = bank->driver_priv; + struct working_area *wa; + const uint32_t sromapi_req = is_sflash ? SROMAPI_WRITEROW_REQ : SROMAPI_PROGRAMROW_REQ; + uint32_t data_out; + int hr = ERROR_OK; + + LOG_DEBUG("Programming ROW @%08X", addr); + + hr = target_alloc_working_area(target, psoc6_info->row_sz + 32, &wa); + if (hr != ERROR_OK) + goto exit; + + hr = target_write_u32(target, wa->address, sromapi_req); + if (hr != ERROR_OK) + goto exit_free_wa; + + hr = target_write_u32(target, + wa->address + 0x04, + 0x106); + if (hr != ERROR_OK) + goto exit_free_wa; + + hr = target_write_u32(target, wa->address + 0x08, addr); + if (hr != ERROR_OK) + goto exit_free_wa; + + hr = target_write_u32(target, wa->address + 0x0C, wa->address + 0x10); + if (hr != ERROR_OK) + goto exit_free_wa; + + hr = target_write_buffer(target, wa->address + 0x10, psoc6_info->row_sz, buffer); + if (hr != ERROR_OK) + goto exit_free_wa; + + hr = call_sromapi(target, sromapi_req, wa->address, &data_out); + +exit_free_wa: + target_free_working_area(target, wa); + +exit: + return hr; +} + + +/************************************************************************************************** + * Programs set of Rows + *************************************************************************************************/ +static int psoc6_program(struct flash_bank *bank, + const uint8_t *buffer, + uint32_t offset, + uint32_t count) +{ + struct target *target = bank->target; + struct psoc6_target_info *psoc6_info = bank->driver_priv; + const bool is_sflash = is_sflash_bank(bank); + int hr; + + hr = sromalgo_prepare(target); + if (hr != ERROR_OK) + return hr; + + uint8_t page_buf[psoc6_info->row_sz]; + + while (count) { + uint32_t row_offset = offset % psoc6_info->row_sz; + uint32_t aligned_addr = bank->base + offset - row_offset; + uint32_t row_bytes = MIN(psoc6_info->row_sz - row_offset, count); + + memset(page_buf, 0, sizeof(page_buf)); + memcpy(&page_buf[row_offset], buffer, row_bytes); + + hr = psoc6_program_row(bank, aligned_addr, page_buf, is_sflash); + if (hr != ERROR_OK) { + LOG_ERROR("Failed to program Flash at address 0x%08X", aligned_addr); + break; + } + + buffer += row_bytes; + offset += row_bytes; + count -= row_bytes; + } + + hr = sromalgo_release(target); + return hr; +} + +/************************************************************************************************** + * Performs Mass Erase of given flash bank + * Syntax: psoc6 mass_erase bank_id + *************************************************************************************************/ +COMMAND_HANDLER(psoc6_handle_mass_erase_command) +{ + if (CMD_ARGC != 1) + return ERROR_COMMAND_SYNTAX_ERROR; + + struct flash_bank *bank; + int hr = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); + if (hr != ERROR_OK) + return hr; + + hr = psoc6_erase(bank, 0, bank->num_sectors - 1); + + return hr; +} + +/************************************************************************************************** + * Simulates broken Vector Catch + * Function will try to determine entry point of user application. If it succeeds it will set HW + * breakpoint at that address, issue SW Reset and remove the breakpoint afterwards. + * In case of CM0, SYSRESETREQ is used. This allows to reset all peripherals. Boot code will + * reset CM4 anyway, so using SYSRESETREQ is safe here. + * In case of CM4, VECTRESET is used instead of SYSRESETREQ to not disturb CM0 core. + *************************************************************************************************/ +int handle_reset_halt(struct target *target) +{ + int hr; + uint32_t reset_addr; + bool is_cm0 = (target->coreid == 0); + + /* Halt target device */ + if (target->state != TARGET_HALTED) { + hr = target_halt(target); + if (hr != ERROR_OK) + return hr; + + target_wait_state(target, TARGET_HALTED, IPC_TIMEOUT_MS); + if (hr != ERROR_OK) + return hr; + } + + /* Read Vector Offset register */ + uint32_t vt_base; + const uint32_t vt_offset_reg = is_cm0 ? 0x402102B0 : 0x402102C0; + hr = target_read_u32(target, vt_offset_reg, &vt_base); + if (hr != ERROR_OK) + return ERROR_OK; + + /* Invalid value means flash is empty */ + vt_base &= 0xFFFFFF00; + if ((vt_base == 0) || (vt_base == 0xFFFFFF00)) + return ERROR_OK; + + /* Read Reset Vector value*/ + hr = target_read_u32(target, vt_base + 4, &reset_addr); + if (hr != ERROR_OK) + return hr; + + /* Invalid value means flash is empty */ + if ((reset_addr == 0) || (reset_addr == 0xFFFFFF00)) + return ERROR_OK; + + + /* Set breakpoint at User Application entry point */ + hr = breakpoint_add(target, reset_addr, 2, BKPT_HARD); + if (hr != ERROR_OK) + return hr; + + const struct armv7m_common *cm = target_to_armv7m(target); + + if (is_cm0) { + /* Reset the CM0 by asserting SYSRESETREQ. This will also reset CM4 */ + LOG_INFO("psoc6.cm0: bkpt @0x%08X, issuing SYSRESETREQ", reset_addr); + hr = mem_ap_write_atomic_u32(cm->debug_ap, + NVIC_AIRCR, + AIRCR_VECTKEY | AIRCR_SYSRESETREQ); + + /* Wait for bootcode and initialize DAP */ + usleep(3000); + dap_dp_init(cm->debug_ap->dap); + } else { + LOG_INFO("psoc6.cm4: bkpt @0x%08X, issuing VECTRESET", reset_addr); + hr = mem_ap_write_atomic_u32(cm->debug_ap, + NVIC_AIRCR, + AIRCR_VECTKEY | AIRCR_VECTRESET); + if (hr != ERROR_OK) + return hr; + } + + target_wait_state(target, TARGET_HALTED, IPC_TIMEOUT_MS); + + /* Remove the break point */ + breakpoint_remove(target, reset_addr); + + return hr; +} + +COMMAND_HANDLER(psoc6_handle_reset_halt) +{ + if (CMD_ARGC) + return ERROR_COMMAND_SYNTAX_ERROR; + + struct target *target = get_current_target(CMD_CTX); + return handle_reset_halt(target); +} + +FLASH_BANK_COMMAND_HANDLER(psoc6_flash_bank_command) +{ + struct psoc6_target_info *psoc6_info; + int hr = ERROR_OK; + + if (CMD_ARGC < 6) + hr = ERROR_COMMAND_SYNTAX_ERROR; + else { + psoc6_info = calloc(1, sizeof(struct psoc6_target_info)); + psoc6_info->is_probed = false; + bank->driver_priv = psoc6_info; + } + return hr; +} + +static const struct command_registration psoc6_exec_command_handlers[] = { + { + .name = "mass_erase", + .handler = psoc6_handle_mass_erase_command, + .mode = COMMAND_EXEC, + .usage = NULL, + .help = "Erases entire Main Flash", + }, + { + .name = "reset_halt", + .handler = psoc6_handle_reset_halt, + .mode = COMMAND_EXEC, + .usage = NULL, + .help = "Tries to simulate broken Vector Catch", + }, + COMMAND_REGISTRATION_DONE +}; + +static const struct command_registration psoc6_command_handlers[] = { + { + .name = "psoc6", + .mode = COMMAND_ANY, + .help = "PSoC 6 flash command group", + .usage = "", + .chain = psoc6_exec_command_handlers, + }, + COMMAND_REGISTRATION_DONE +}; + +struct flash_driver psoc6_flash = { + .name = "psoc6", + .commands = psoc6_command_handlers, + .flash_bank_command = psoc6_flash_bank_command, + .erase = psoc6_erase, + .protect = psoc6_protect, + .write = psoc6_program, + .read = default_flash_read, + .probe = psoc6_probe, + .auto_probe = psoc6_auto_probe, + .erase_check = default_flash_blank_check, + .protect_check = psoc6_protect_check, + .info = psoc6_get_info, +}; diff --git a/tcl/target/psoc6.cfg b/tcl/target/psoc6.cfg new file mode 100644 index 00000000..d6c5a04a --- /dev/null +++ b/tcl/target/psoc6.cfg @@ -0,0 +1,134 @@ +# +# Configuration script for Cypress PSoC6 family of microcontrollers (CY8C6xxx) +# PSoC6 is a dual-core device with CM0+ and CM4 cores. Both cores share +# the same Flash/RAM/MMIO address space. +# + +source [find target/swj-dp.tcl] + +adapter_khz 1000 + +global _CHIPNAME +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME psoc6 +} + +global TARGET +set TARGET $_CHIPNAME.cpu + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf + +# Is CM0 Debugging enabled ? +global _ENABLE_CM0 +if { [info exists ENABLE_CM0] } { + set _ENABLE_CM0 $ENABLE_CM0 +} else { + set _ENABLE_CM0 1 +} + +# Is CM4 Debugging enabled ? +global _ENABLE_CM4 +if { [info exists ENABLE_CM4] } { + set _ENABLE_CM4 $ENABLE_CM4 +} else { + set _ENABLE_CM4 1 +} + +global _WORKAREASIZE_CM0 +if { [info exists WORKAREASIZE_CM0] } { + set _WORKAREASIZE_CM0 $WORKAREASIZE_CM0 +} else { + set _WORKAREASIZE_CM0 0x4000 +} + +global _WORKAREASIZE_CM4 +if { [info exists WORKAREASIZE_CM4] } { + set _WORKAREASIZE_CM4 $WORKAREASIZE_CM4 +} else { + set _WORKAREASIZE_CM4 0x4000 +} + +global _WORKAREAADDR_CM0 +if { [info exists WORKAREAADDR_CM0] } { + set _WORKAREAADDR_CM0 $WORKAREAADDR_CM0 +} else { + set _WORKAREAADDR_CM0 0x08000000 +} + +global _WORKAREAADDR_CM4 +if { [info exists WORKAREAADDR_CM4] } { + set _WORKAREAADDR_CM4 $WORKAREAADDR_CM4 +} else { + set _WORKAREAADDR_CM4 0x08000000 +} + +proc init_reset { mode } { + global RESET_MODE + set RESET_MODE $mode + + if {[using_jtag]} { + jtag arp_init-reset + } +} + +# Utility to make 'reset halt' work as reset;halt on a target +# It does not prevent running code after reset +proc psoc6_deassert_post { target } { + # PSoC6 cleared AP registers including TAR during reset + # Force examine to synchronize OpenOCD target status + $target arp_examine + + global RESET_MODE + if { $RESET_MODE ne "run" } { + $target arp_poll + $target arp_poll + set st [$target curstate] + if { $st eq "reset" } { + # we assume running state follows + # if reset accidentally halts, waiting is useless + catch { $target arp_waitstate running 100 } + set st [$target curstate] + } + if { $st eq "running" } { + echo "$target: Ran after reset and before halt..." + $target arp_halt + } + } +} + +if { $_ENABLE_CM0 } { + target create ${TARGET}.cm0 cortex_m -chain-position $TARGET -ap-num 1 -coreid 0 + ${TARGET}.cm0 configure -work-area-phys $_WORKAREAADDR_CM0 -work-area-size $_WORKAREASIZE_CM0 -work-area-backup 0 + + flash bank main_flash_cm0 psoc6 0x10000000 0 0 0 ${TARGET}.cm0 + flash bank work_flash_cm0 psoc6 0x14000000 0 0 0 ${TARGET}.cm0 + flash bank super_flash_user_cm0 psoc6 0x16000800 0 0 0 ${TARGET}.cm0 + flash bank super_flash_nar_cm0 psoc6 0x16001A00 0 0 0 ${TARGET}.cm0 + flash bank super_flash_key_cm0 psoc6 0x16005A00 0 0 0 ${TARGET}.cm0 + flash bank super_flash_toc2_cm0 psoc6 0x16007C00 0 0 0 ${TARGET}.cm0 + + ${TARGET}.cm0 cortex_m reset_config sysresetreq + ${TARGET}.cm0 configure -event reset-deassert-post "psoc6_deassert_post ${TARGET}.cm0" +} + +if { $_ENABLE_CM4 } { + target create ${TARGET}.cm4 cortex_m -chain-position $TARGET -ap-num 2 -coreid 1 + ${TARGET}.cm4 configure -work-area-phys $_WORKAREAADDR_CM4 -work-area-size $_WORKAREASIZE_CM4 -work-area-backup 0 + + flash bank main_flash_cm4 psoc6 0x10000000 0 0 0 ${TARGET}.cm4 + flash bank work_flash_cm4 psoc6 0x14000000 0 0 0 ${TARGET}.cm4 + flash bank super_flash_user_cm4 psoc6 0x16000800 0 0 0 ${TARGET}.cm4 + flash bank super_flash_nar_cm4 psoc6 0x16001A00 0 0 0 ${TARGET}.cm4 + flash bank super_flash_key_cm4 psoc6 0x16005A00 0 0 0 ${TARGET}.cm4 + flash bank super_flash_toc2_cm4 psoc6 0x16007C00 0 0 0 ${TARGET}.cm4 + + ${TARGET}.cm4 cortex_m reset_config vectreset + ${TARGET}.cm4 configure -event reset-deassert-post "psoc6_deassert_post ${TARGET}.cm4" +} + +if { $_ENABLE_CM0 } { + # Use CM0+ by default on dual-core devices + targets ${TARGET}.cm0 +}