From: elmot <elmot@vaadin.com>
Date: Thu, 7 Dec 2017 08:08:28 +0000 (+0200)
Subject: config: stm32l01x and stm32l02x chips support
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=eb26a884e0ff0fb6568aeda65fe21eec1e5b6557;p=openocd

config: stm32l01x and stm32l02x chips support

New low-end chips have only 2k of RAM, workarea size adjusted

Change-Id: Ibfccd73fef9e6dabffc87d901736c5626ce411fe
Signed-off-by: Ilia Motornyi <elijah.mot@gmail.com>
Reviewed-on: http://openocd.zylin.com/4308
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
---

diff --git a/tcl/target/stm32l0.cfg b/tcl/target/stm32l0.cfg
index 245213b4..417b282d 100644
--- a/tcl/target/stm32l0.cfg
+++ b/tcl/target/stm32l0.cfg
@@ -15,11 +15,11 @@ if { [info exists CHIPNAME] } {
 set _ENDIAN little
 
 # Work-area is a space in RAM used for flash programming
-# By default use 8kB (max ram on smallest part)
+# By default use 2kB (max ram on smallest part)
 if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE $WORKAREASIZE
 } else {
-   set _WORKAREASIZE 0x2000
+   set _WORKAREASIZE 0x800
 }
 
 # JTAG speed should be <= F_CPU/6.