From: Spencer Oliver Date: Wed, 22 Jan 2014 11:04:26 +0000 (+0000) Subject: cfg: LPC17xx default to using SYSRESETREQ to reset target X-Git-Tag: v0.8.0-rc1~103 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ebb71eb291a85b9d6de148461edb575e4e79745f;p=openocd cfg: LPC17xx default to using SYSRESETREQ to reset target Originally the LPC17xx user guide (UM10360 Rev 2) stated that SYSRESETREQ was not supported, so this was the default cortex_m reset mode. Rev 3 of the same user guide states that it is now supported. This has been verified on a LPC1768 mbed platform, previously I have not tested this functionality. Change-Id: I4858248903981a1c93ce75016e67c9e02702fcc5 Signed-off-by: Spencer Oliver Reviewed-on: http://openocd.zylin.com/1892 Tested-by: jenkins Reviewed-by: Jörg Fischer Reviewed-by: Andreas Fritiofson --- diff --git a/tcl/target/lpc17xx.cfg b/tcl/target/lpc17xx.cfg index c81971f9..372107f7 100644 --- a/tcl/target/lpc17xx.cfg +++ b/tcl/target/lpc17xx.cfg @@ -94,6 +94,6 @@ $_TARGETNAME configure -event reset-init { mww 0x400FC040 0x01 } -# if srst is not fitted use VECTRESET to -# perform a soft reset - SYSRESETREQ is not supported -cortex_m reset_config vectreset +# if srst is not fitted use SYSRESETREQ to +# perform a soft reset +cortex_m reset_config sysresetreq