From: Wenyou Yang <wenyou.yang@atmel.com>
Date: Thu, 23 Mar 2017 06:26:26 +0000 (+0800)
Subject: board: sama5d2_xplained: remove uart1 init
X-Git-Tag: v2017.07-rc1~388^2~42
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ed03b1ba3c956648f7b4e42978d797c8f1b9f269;p=u-boot

board: sama5d2_xplained: remove uart1 init

Due to the pin configuration and clock enabling is handling by the
driver, remove the unneeded hardcode uart1 init during
board_early_init_f stage.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 5f38ebc2d2..c23cb0ecdd 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -115,6 +115,7 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif /* CONFIG_LCD */
 
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void board_uart1_hw_init(void)
 {
 	atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1);	/* URXD1 */
@@ -123,7 +124,6 @@ static void board_uart1_hw_init(void)
 	at91_periph_clk_enable(ATMEL_ID_UART1);
 }
 
-#ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
 {
 	board_uart1_hw_init();
@@ -135,8 +135,6 @@ int board_early_init_f(void)
 {
 #ifdef CONFIG_DEBUG_UART
 	debug_uart_init();
-#else
-	board_uart1_hw_init();
 #endif
 
 	return 0;