From: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Date: Thu, 25 Oct 2012 12:29:33 +0000 (+0200)
Subject: Added support for NXP LPC1850 Microcontroller
X-Git-Tag: v0.7.0-rc1~168
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ed3632d9c7b89ef2934d48806ada7b2b5ee54a42;p=openocd

Added support for NXP LPC1850 Microcontroller

Added a new configuration file for LPC18xx based boards, such as
HitexLPC1850RevA Evaluation Board, and all other based on the
same microcontroller by NXP.

Change-Id: I68c3827be535b6d09a5c70b6d57191937d00354d
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/930
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/tcl/target/lpc1850.cfg b/tcl/target/lpc1850.cfg
new file mode 100644
index 00000000..1ea7a49e
--- /dev/null
+++ b/tcl/target/lpc1850.cfg
@@ -0,0 +1,31 @@
+
+adapter_khz 500
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	set _CHIPNAME lpc1850
+}
+
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
+}
+#
+# M3 JTAG mode TAP
+#
+if { [info exists M3_JTAG_TAPID] } {
+   set _M3_JTAG_TAPID $M3_JTAG_TAPID
+} else {
+   set _M3_JTAG_TAPID 0x4ba00477
+}
+
+jtag newtap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID
+
+set _TARGETNAME $_CHIPNAME.m3
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+# if srst is not fitted use SYSRESETREQ to
+# perform a soft reset
+cortex_m3 reset_config sysresetreq