From: Kever Yang Date: Tue, 28 Nov 2017 08:04:20 +0000 (+0800) Subject: rockchip: rk3128: add defconfig for evb-rk3128 X-Git-Tag: v2018.01-rc1~25^2~11 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ed7e64e5e87c728775c78924499e95e6fee65921;p=u-boot rockchip: rk3128: add defconfig for evb-rk3128 Enable board config for evb-rk3128. Serial output and eMMC works in this version. Signed-off-by: Kever Yang Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich --- diff --git a/configs/evb-rk3128_defconfig b/configs/evb-rk3128_defconfig new file mode 100644 index 0000000000..7c2a607e90 --- /dev/null +++ b/configs/evb-rk3128_defconfig @@ -0,0 +1,56 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ROCKCHIP_RK3128=y +CONFIG_DEFAULT_DEVICE_TREE="rk3128-evb" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_FASTBOOT=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_CMD_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x60800800 +CONFIG_FASTBOOT_BUF_SIZE=0x04000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ROCKCHIP_RK3128=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_RAM=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_BASE=0x20068000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC2=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Rockchip" +CONFIG_G_DNL_VENDOR_NUM=0x2207 +CONFIG_G_DNL_PRODUCT_NUM=0x310c +CONFIG_USE_TINY_PRINTF=y +CONFIG_ERRNO_STR=y