From: Paul Fertser Date: Fri, 15 May 2015 10:16:12 +0000 (+0300) Subject: manual: fix all overfull and underfull hboxes X-Git-Tag: v0.9.0~11 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ee5ecb8a299fa22f7a7882adebf2a74263fc909f;p=openocd manual: fix all overfull and underfull hboxes Change-Id: Id84f16de5a3d1907e196d13007a312593bb6670a Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/2769 Tested-by: jenkins Reviewed-by: Andreas Fritiofson --- diff --git a/doc/openocd.texi b/doc/openocd.texi index ce0bf13b..0e197c3c 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -471,7 +471,7 @@ SWD and not JTAG, thus not supported. @itemize @bullet @item @b{Raisonance RLink} -@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html} +@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__@/microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html} @item @b{STM32 Primer} @* Link: @url{http://www.stm32circle.com/resources/stm32primer.php} @item @b{STM32 Primer2} @@ -4014,14 +4014,14 @@ not a CPU type. It is based on the ARMv5 architecture. @item @code{openrisc} -- this is an OpenRISC 1000 core. The current implementation supports three JTAG TAP cores: @itemize @minus -@item @code{OpenCores TAP} (See: @emph{http://opencores.org/project,jtag}) -@item @code{Altera Virtual JTAG TAP} (See: @emph{http://www.altera.com/literature/ug/ug_virtualjtag.pdf}) -@item @code{Xilinx BSCAN_* virtual JTAG interface} (See: @emph{http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_2/spartan6_hdl.pdf}) +@item @code{OpenCores TAP} (See: @url{http://opencores.org/project,jtag}) +@item @code{Altera Virtual JTAG TAP} (See: @url{http://www.altera.com/literature/ug/ug_virtualjtag.pdf}) +@item @code{Xilinx BSCAN_* virtual JTAG interface} (See: @url{http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_2/spartan6_hdl.pdf}) @end itemize And two debug interfaces cores: @itemize @minus -@item @code{Advanced debug interface} (See: @emph{http://opencores.org/project,adv_debug_sys}) -@item @code{SoC Debug Interface} (See: @emph{http://opencores.org/project,dbg_interface}) +@item @code{Advanced debug interface} (See: @url{http://opencores.org/project,adv_debug_sys}) +@item @code{SoC Debug Interface} (See: @url{http://opencores.org/project,dbg_interface}) @end itemize @end itemize @end deffn @@ -4345,7 +4345,8 @@ proc my_attach_proc @{ @} @{ mychip.cpu configure -event gdb-attach my_attach_proc mychip.cpu configure -event gdb-attach @{ echo "Reset..." - # To make flash probe and gdb load to flash work we need a reset init. + # To make flash probe and gdb load to flash work + # we need a reset init. reset init @} @end example @@ -5430,7 +5431,8 @@ The @var{str7x} driver defines one mandatory parameter, @var{variant}, which is either @code{STR71x}, @code{STR73x} or @code{STR75x}. @example -flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x +flash bank $_FLASHNAME str7x \ + 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x @end example @deffn Command {str7x disable_jtag} bank @@ -5676,7 +5678,8 @@ based controllers. A known limitation is that the Info memory can't be read or verified as it's not memory mapped. @example -flash bank mdr 0 0 @var{type} @var{page_count} @var{sec_count} +flash bank mdr \ + 0 0 @var{type} @var{page_count} @var{sec_count} @end example @itemize @bullet @@ -5688,9 +5691,11 @@ flash bank mdr 0 0 @var{type} @var{page_count} @v Example usage: @example if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{ - flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 0 0 $_TARGETNAME 1 1 4 + flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \ + 0 0 $_TARGETNAME 1 1 4 @} else @{ - flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 0 0 $_TARGETNAME 0 32 4 + flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \ + 0 0 $_TARGETNAME 0 32 4 @} @end example @end deffn @@ -6638,7 +6643,8 @@ In addition the following arguments may be specifed: proc load_image_bin @{fname foffset address length @} @{ # Load data from fname filename at foffset offset to # target at address. Load at most length bytes. - load_image $fname [expr $address - $foffset] bin $address $length + load_image $fname [expr $address - $foffset] bin \ + $address $length @} @end example @end deffn @@ -7563,9 +7569,13 @@ $ stty -F /dev/ttyUSB1 38400 (FT2232H's base frequency is 60MHz, spd_cust allows to alias 38400 baud with our custom divisor to get 12MHz) @item @code{itmdump -f /dev/ttyUSB1 -d1} -@item @code{openocd -f interface/stlink-v2-1.cfg -c "transport select -hla_swd" -f target/stm32l1.cfg -c "tpiu config external uart off -24000000 12000000"} +@item OpenOCD invocation line: +@example +openocd -f interface/stlink-v2-1.cfg \ + -c "transport select hla_swd" \ + -f target/stm32l1.cfg \ + -c "tpiu config external uart off 24000000 12000000" +@end example @end enumerate @end deffn @@ -8442,9 +8452,11 @@ Cyg_Thread::thread_list, Cyg_Scheduler_Base::current_thread. @item ThreadX symbols _tx_thread_current_ptr, _tx_thread_created_ptr, _tx_thread_created_count. @item FreeRTOS symbols +@raggedright pxCurrentTCB, pxReadyTasksLists, xDelayedTaskList1, xDelayedTaskList2, pxDelayedTaskList, pxOverflowDelayedTaskList, xPendingReadyList, uxCurrentNumberOfTasks, uxTopUsedPriority. +@end raggedright @item linux symbols init_task. @item ChibiOS symbols