From: Andy Fleming Date: Wed, 18 May 2011 13:44:19 +0000 (+0000) Subject: phylib: Detect link on 10G devices correctly X-Git-Tag: v2011.09-rc1~153 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ee8fa20f54c9705218a5c21e7db7d4ba1c124b98;p=u-boot phylib: Detect link on 10G devices correctly gen10g_startup() had 2 bugs: 1) It had a boolean logic error in checking the MMD mask, and always checked all of them. 2) It checked devices which don't actually report link state, which meant that it would never believe the link was fully up. Fix the boolean logic, and then mask the MMD mask so only link-reporting devices are checked. Signed-off-by: Andy Fleming Reported-by: Ed Swarthout --- diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c index 60dec457bf..e4a499d461 100644 --- a/drivers/net/phy/generic_10g.c +++ b/drivers/net/phy/generic_10g.c @@ -36,7 +36,7 @@ int gen10g_shutdown(struct phy_device *phydev) int gen10g_startup(struct phy_device *phydev) { int devad, reg; - u32 mmd_mask = phydev->mmds; + u32 mmd_mask = phydev->mmds & MDIO_DEVS_LINK; phydev->link = 1; @@ -44,8 +44,12 @@ int gen10g_startup(struct phy_device *phydev) phydev->speed = SPEED_10000; phydev->duplex = DUPLEX_FULL; + /* + * Go through all the link-reporting devices, and make sure + * they're all up and happy + */ for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { - if (!mmd_mask & 1) + if (!(mmd_mask & 1)) continue; /* Read twice because link state is latched and a diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 022d77214e..be80f91476 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -120,6 +120,14 @@ #define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) #define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) +#define MDIO_DEVS_LINK (MDIO_DEVS_PMAPMD | \ + MDIO_DEVS_WIS | \ + MDIO_DEVS_PCS | \ + MDIO_DEVS_PHYXS | \ + MDIO_DEVS_DTEXS | \ + MDIO_DEVS_AN) + + /* Control register 2. */ #define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */