From: Tim Harvey Date: Wed, 8 Apr 2015 19:54:53 +0000 (-0700) Subject: imx: ventana: added DT fixup for GW551x-A video input X-Git-Tag: v2015.07-rc1~63^2~23 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=eeca451ace0cdbac2e0c4bbc527fbe7488bdd4f9;p=u-boot imx: ventana: added DT fixup for GW551x-A video input The GW551x-A revision does not have the CSI0_DATA_EN pin connected, therefore we need to make sure that signal is not muxed to the CSI_DATA_EN signal internally and do so by steering it to the unused GPIO5_IO20. We do this so that the kernel device-tree can properly define the signal for RevB and beyond boards that do have this hooked up properly and require it. Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 307ffa583e..068c7264bb 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1609,6 +1609,41 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_status_disabled(blob, i); } + /* + * isolate CSI0_DATA_EN for GW551x below revB to work around + * errata causing non functional digital video in (it is not hooked up) + */ + else if (board_type == GW551x && rev == 'A') { + u32 *range = NULL; + int len; + const u32 *handle = NULL; + + i = fdt_node_offset_by_compatible(blob, -1, + "fsl,imx-tda1997x-video"); + if (i) + handle = fdt_getprop(blob, i, "pinctrl-0", NULL); + if (handle) + i = fdt_node_offset_by_phandle(blob, + fdt32_to_cpu(*handle)); + if (i) + range = (u32 *)fdt_getprop(blob, i, "fsl,pins", &len); + if (range) { + len /= sizeof(u32); + for (i = 0; i < len; i += 6) { + u32 mux_reg = fdt32_to_cpu(range[i+0]); + u32 conf_reg = fdt32_to_cpu(range[i+1]); + /* mux PAD_CSI0_DATA_EN to GPIO */ + if (is_cpu_type(MXC_CPU_MX6Q) && + mux_reg == 0x260 && conf_reg == 0x630) + range[i+3] = cpu_to_fdt32(0x5); + else if (!is_cpu_type(MXC_CPU_MX6Q) && + mux_reg == 0x08c && conf_reg == 0x3a0) + range[i+3] = cpu_to_fdt32(0x5); + } + fdt_setprop_inplace(blob, i, "fsl,pins", range, len); + } + } + /* * Peripheral Config: * remove nodes by alias path if EEPROM config tells us the