From: Masahiro Yamada Date: Fri, 20 Feb 2015 08:04:07 +0000 (+0900) Subject: ARM: nomadik: move SoC sources to mach-nomadik X-Git-Tag: v2015.04-rc3~47 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=ef917ddb1d9240b075f3c03ddf6e246c89b86fa6;p=u-boot ARM: nomadik: move SoC sources to mach-nomadik Move arch/arm/cpu/arm926ejs/nomadik/* -> arch/arm/mach-nomadik/* Signed-off-by: Masahiro Yamada Cc: Nomadik Linux Team Cc: Alessandro Rubini --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dba6518fb3..1bac511531 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -728,7 +728,7 @@ source "arch/arm/cpu/armv7/keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" -source "arch/arm/cpu/arm926ejs/nomadik/Kconfig" +source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/cpu/armv7/omap3/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e09de5182e..32d039c2d0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -9,6 +9,7 @@ machine-$(CONFIG_ARCH_DAVINCI) += davinci # TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD machine-$(CONFIG_KIRKWOOD) += kirkwood # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA +machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_TEGRA) += tegra machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index 0b43a90fbd..ed0cf0fa05 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_MB86R0x) += mb86r0x/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ -obj-$(CONFIG_ARCH_NOMADIK) += nomadik/ obj-$(CONFIG_ORION5X) += orion5x/ obj-$(CONFIG_PANTHEON) += pantheon/ obj-$(if $(filter spear,$(SOC)),y) += spear/ diff --git a/arch/arm/cpu/arm926ejs/nomadik/Kconfig b/arch/arm/cpu/arm926ejs/nomadik/Kconfig deleted file mode 100644 index 265f336469..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if ARCH_NOMADIK - -choice - prompt "Nomadik board select" - -config NOMADIK_NHK8815 - bool "ST 8815 Nomadik Hardware Kit" - -endchoice - -config SYS_SOC - default "nomadik" - -source "board/st/nhk8815/Kconfig" - -endif diff --git a/arch/arm/cpu/arm926ejs/nomadik/Makefile b/arch/arm/cpu/arm926ejs/nomadik/Makefile deleted file mode 100644 index cdf1345d58..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = timer.o gpio.o -obj-y += reset.o diff --git a/arch/arm/cpu/arm926ejs/nomadik/gpio.c b/arch/arm/cpu/arm926ejs/nomadik/gpio.c deleted file mode 100644 index eff5b2b75e..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/gpio.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -static unsigned long gpio_base[4] = { - NOMADIK_GPIO0_BASE, - NOMADIK_GPIO1_BASE, - NOMADIK_GPIO2_BASE, - NOMADIK_GPIO3_BASE -}; - -enum gpio_registers { - GPIO_DAT = 0x00, /* data register */ - GPIO_DATS = 0x04, /* data set */ - GPIO_DATC = 0x08, /* data clear */ - GPIO_PDIS = 0x0c, /* pull disable */ - GPIO_DIR = 0x10, /* direction */ - GPIO_DIRS = 0x14, /* direction set */ - GPIO_DIRC = 0x18, /* direction clear */ - GPIO_AFSLA = 0x20, /* alternate function select A */ - GPIO_AFSLB = 0x24, /* alternate function select B */ -}; - -static inline unsigned long gpio_to_base(int gpio) -{ - return gpio_base[gpio / 32]; -} - -static inline u32 gpio_to_bit(int gpio) -{ - return 1 << (gpio & 0x1f); -} - -void nmk_gpio_af(int gpio, int alternate_function) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - u32 afunc, bfunc; - - /* alternate function is 0..3, with one bit per register */ - afunc = readl(base + GPIO_AFSLA) & ~bit; - bfunc = readl(base + GPIO_AFSLB) & ~bit; - if (alternate_function & 1) afunc |= bit; - if (alternate_function & 2) bfunc |= bit; - writel(afunc, base + GPIO_AFSLA); - writel(bfunc, base + GPIO_AFSLB); -} - -void nmk_gpio_dir(int gpio, int dir) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - if (dir) - writel(bit, base + GPIO_DIRS); - else - writel(bit, base + GPIO_DIRC); -} - -void nmk_gpio_set(int gpio, int val) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - if (val) - writel(bit, base + GPIO_DATS); - else - writel(bit, base + GPIO_DATC); -} - -int nmk_gpio_get(int gpio) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - return readl(base + GPIO_DAT) & bit; -} diff --git a/arch/arm/cpu/arm926ejs/nomadik/reset.S b/arch/arm/cpu/arm926ejs/nomadik/reset.S deleted file mode 100644 index ec954726ae..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/reset.S +++ /dev/null @@ -1,14 +0,0 @@ -#include -/* - * Processor reset for Nomadik - */ - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r0, =NOMADIK_SRC_BASE /* System and Reset Controller */ - ldr r1, =0x1 - str r1, [r0, #0x18] - -_loop_forever: - b _loop_forever diff --git a/arch/arm/cpu/arm926ejs/nomadik/timer.c b/arch/arm/cpu/arm926ejs/nomadik/timer.c deleted file mode 100644 index 775d0b7488..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/timer.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * The timer is a decrementer, we'll left it free running at 2.4MHz. - * We have 2.4 ticks per microsecond and an overflow in almost 30min - */ -#define TIMER_CLOCK (24 * 100 * 1000) -#define COUNT_TO_USEC(x) ((x) * 5 / 12) /* overflows at 6min */ -#define USEC_TO_COUNT(x) ((x) * 12 / 5) /* overflows at 6min */ -#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) -#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) - -/* macro to read the decrementing 32 bit timer as an increasing count */ -#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0))) - -/* Configure a free-running, auto-wrap counter with no prescaler */ -int timer_init(void) -{ - ulong val; - - writel(MTU_CRn_ENA | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS, - CONFIG_SYS_TIMERBASE + MTU_CR(0)); - - /* Reset the timer */ - writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0)); - /* - * The load-register isn't really immediate: it changes on clock - * edges, so we must wait for our newly-written value to appear. - * Since we might miss reading 0, wait for any change in value. - */ - val = READ_TIMER(); - while (READ_TIMER() == val) - ; - - return 0; -} - -/* Return how many HZ passed since "base" */ -ulong get_timer(ulong base) -{ - return TICKS_TO_HZ(READ_TIMER()) - base; -} - -/* Delay x useconds */ -void __udelay(unsigned long usec) -{ - ulong ini, end; - - ini = READ_TIMER(); - end = ini + USEC_TO_COUNT(usec); - while ((signed)(end - READ_TIMER()) > 0) - ; -} - -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig new file mode 100644 index 0000000000..265f336469 --- /dev/null +++ b/arch/arm/mach-nomadik/Kconfig @@ -0,0 +1,16 @@ +if ARCH_NOMADIK + +choice + prompt "Nomadik board select" + +config NOMADIK_NHK8815 + bool "ST 8815 Nomadik Hardware Kit" + +endchoice + +config SYS_SOC + default "nomadik" + +source "board/st/nhk8815/Kconfig" + +endif diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile new file mode 100644 index 0000000000..cdf1345d58 --- /dev/null +++ b/arch/arm/mach-nomadik/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = timer.o gpio.o +obj-y += reset.o diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c new file mode 100644 index 0000000000..eff5b2b75e --- /dev/null +++ b/arch/arm/mach-nomadik/gpio.c @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2009 Alessandro Rubini + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +static unsigned long gpio_base[4] = { + NOMADIK_GPIO0_BASE, + NOMADIK_GPIO1_BASE, + NOMADIK_GPIO2_BASE, + NOMADIK_GPIO3_BASE +}; + +enum gpio_registers { + GPIO_DAT = 0x00, /* data register */ + GPIO_DATS = 0x04, /* data set */ + GPIO_DATC = 0x08, /* data clear */ + GPIO_PDIS = 0x0c, /* pull disable */ + GPIO_DIR = 0x10, /* direction */ + GPIO_DIRS = 0x14, /* direction set */ + GPIO_DIRC = 0x18, /* direction clear */ + GPIO_AFSLA = 0x20, /* alternate function select A */ + GPIO_AFSLB = 0x24, /* alternate function select B */ +}; + +static inline unsigned long gpio_to_base(int gpio) +{ + return gpio_base[gpio / 32]; +} + +static inline u32 gpio_to_bit(int gpio) +{ + return 1 << (gpio & 0x1f); +} + +void nmk_gpio_af(int gpio, int alternate_function) +{ + unsigned long base = gpio_to_base(gpio); + u32 bit = gpio_to_bit(gpio); + u32 afunc, bfunc; + + /* alternate function is 0..3, with one bit per register */ + afunc = readl(base + GPIO_AFSLA) & ~bit; + bfunc = readl(base + GPIO_AFSLB) & ~bit; + if (alternate_function & 1) afunc |= bit; + if (alternate_function & 2) bfunc |= bit; + writel(afunc, base + GPIO_AFSLA); + writel(bfunc, base + GPIO_AFSLB); +} + +void nmk_gpio_dir(int gpio, int dir) +{ + unsigned long base = gpio_to_base(gpio); + u32 bit = gpio_to_bit(gpio); + + if (dir) + writel(bit, base + GPIO_DIRS); + else + writel(bit, base + GPIO_DIRC); +} + +void nmk_gpio_set(int gpio, int val) +{ + unsigned long base = gpio_to_base(gpio); + u32 bit = gpio_to_bit(gpio); + + if (val) + writel(bit, base + GPIO_DATS); + else + writel(bit, base + GPIO_DATC); +} + +int nmk_gpio_get(int gpio) +{ + unsigned long base = gpio_to_base(gpio); + u32 bit = gpio_to_bit(gpio); + + return readl(base + GPIO_DAT) & bit; +} diff --git a/arch/arm/mach-nomadik/reset.S b/arch/arm/mach-nomadik/reset.S new file mode 100644 index 0000000000..ec954726ae --- /dev/null +++ b/arch/arm/mach-nomadik/reset.S @@ -0,0 +1,14 @@ +#include +/* + * Processor reset for Nomadik + */ + + .align 5 +.globl reset_cpu +reset_cpu: + ldr r0, =NOMADIK_SRC_BASE /* System and Reset Controller */ + ldr r1, =0x1 + str r1, [r0, #0x18] + +_loop_forever: + b _loop_forever diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c new file mode 100644 index 0000000000..775d0b7488 --- /dev/null +++ b/arch/arm/mach-nomadik/timer.c @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2009 Alessandro Rubini + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +/* + * The timer is a decrementer, we'll left it free running at 2.4MHz. + * We have 2.4 ticks per microsecond and an overflow in almost 30min + */ +#define TIMER_CLOCK (24 * 100 * 1000) +#define COUNT_TO_USEC(x) ((x) * 5 / 12) /* overflows at 6min */ +#define USEC_TO_COUNT(x) ((x) * 12 / 5) /* overflows at 6min */ +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) + +/* macro to read the decrementing 32 bit timer as an increasing count */ +#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0))) + +/* Configure a free-running, auto-wrap counter with no prescaler */ +int timer_init(void) +{ + ulong val; + + writel(MTU_CRn_ENA | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS, + CONFIG_SYS_TIMERBASE + MTU_CR(0)); + + /* Reset the timer */ + writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0)); + /* + * The load-register isn't really immediate: it changes on clock + * edges, so we must wait for our newly-written value to appear. + * Since we might miss reading 0, wait for any change in value. + */ + val = READ_TIMER(); + while (READ_TIMER() == val) + ; + + return 0; +} + +/* Return how many HZ passed since "base" */ +ulong get_timer(ulong base) +{ + return TICKS_TO_HZ(READ_TIMER()) - base; +} + +/* Delay x useconds */ +void __udelay(unsigned long usec) +{ + ulong ini, end; + + ini = READ_TIMER(); + end = ini + USEC_TO_COUNT(usec); + while ((signed)(end - READ_TIMER()) > 0) + ; +} + +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +}