From: Jason Kridner <jkridner@gmail.com>
Date: Wed, 7 Mar 2018 10:40:41 +0000 (-0500)
Subject: Add support for BeagleBoard.org PocketBeagle
X-Git-Tag: v2018.05-rc2~107
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=eff0c977b3b9466657362869e04da231a892e31e;p=u-boot

Add support for BeagleBoard.org PocketBeagle

Texas Instruments AM3358 based low-cost board using Octavo Systems OSD3358 SIP
with built-in TPS65217 PMIC and 512MB DDR3. Board features small 35mm x
55mm size, high-speed USB OTG, microSD and 72 0.1" expansion header
pins with 2xSPI, 2xI2C, 2xUART, USB, 8xADC, up-to-44 GPIO, PRU pins and much more.

https://beagleboard.org/pocket

This was tested using the am335x_evm_usbspl_defconfig.

Note that MII pins are enabled despite not having Ethernet on this
board. This avoids an issue where otherwise many timeout errors would be
generated. See https://e2e.ti.com/support/arm/sitara_arm/f/791/t/298976
for some related discussion.

Signed-off-by: Jason Kridner <jdk@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index f802657299..7f0fb5d2ba 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -264,7 +264,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
 
 	if (board_is_evm_sk())
 		return &dpll_ddr3_303MHz[ind];
-	else if (board_is_bone_lt() || board_is_icev2())
+	else if (board_is_pb() || board_is_bone_lt() || board_is_icev2())
 		return &dpll_ddr3_400MHz[ind];
 	else if (board_is_evm_15_or_later())
 		return &dpll_ddr3_303MHz[ind];
@@ -295,7 +295,7 @@ const struct dpll_params *get_dpll_mpu_params(void)
 	if (bone_not_connected_to_ac_power())
 		freq = MPUPLL_M_600;
 
-	if (board_is_bone_lt())
+	if (board_is_pb() || board_is_bone_lt())
 		freq = MPUPLL_M_1000;
 
 	switch (freq) {
@@ -341,7 +341,7 @@ static void scale_vcores_bone(int freq)
 	 * Override what we have detected since we know if we have
 	 * a Beaglebone Black it supports 1GHz.
 	 */
-	if (board_is_bone_lt())
+	if (board_is_pb() || board_is_bone_lt())
 		freq = MPUPLL_M_1000;
 
 	switch (freq) {
@@ -542,7 +542,7 @@ void sdram_init(void)
 	if (board_is_evm_sk())
 		config_ddr(303, &ioregs_evmsk, &ddr3_data,
 			   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-	else if (board_is_bone_lt())
+	else if (board_is_pb() || board_is_bone_lt())
 		config_ddr(400, &ioregs_bonelt,
 			   &ddr3_beagleblack_data,
 			   &ddr3_beagleblack_cmd_ctrl_data,
@@ -941,6 +941,8 @@ int board_fit_config_name_match(const char *name)
 		return 0;
 	else if (board_is_bone_lt() && !strcmp(name, "am335x-boneblack"))
 		return 0;
+	else if (board_is_pb() && !strcmp(name, "am335x-pocketbeagle"))
+		return 0;
 	else if (board_is_evm_sk() && !strcmp(name, "am335x-evmsk"))
 		return 0;
 	else if (board_is_bbg1() && !strcmp(name, "am335x-bonegreen"))
diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h
index e13fcff02a..bab5b77f34 100644
--- a/board/ti/am335x/board.h
+++ b/board/ti/am335x/board.h
@@ -34,6 +34,11 @@ static inline int board_is_bone_lt(void)
 	return board_ti_is("A335BNLT");
 }
 
+static inline int board_is_pb(void)
+{
+	return board_ti_is("A335PBGL");
+}
+
 static inline int board_is_bbg1(void)
 {
 	return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BBG1", 4);
@@ -41,7 +46,7 @@ static inline int board_is_bbg1(void)
 
 static inline int board_is_beaglebonex(void)
 {
-	return board_is_bone() || board_is_bone_lt() || board_is_bbg1();
+	return board_is_pb() || board_is_bone() || board_is_bone_lt() || board_is_bbg1();
 }
 
 static inline int board_is_evm_sk(void)
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index ad85b3a19a..aa187605d0 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -390,6 +390,9 @@ void enable_board_pin_mux(void)
 #else
 		configure_module_pin_mux(mmc1_pin_mux);
 #endif
+	} else if (board_is_pb()) {
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_pin_mux);
 	} else if (board_is_icev2()) {
 		configure_module_pin_mux(mmc0_pin_mux);
 		configure_module_pin_mux(gpio0_18_pin_mux);
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 158b7d4e8e..8d45b6fade 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -133,6 +133,8 @@
 			"setenv fdtfile am335x-bone.dtb; fi; " \
 		"if test $board_name = A335BNLT; then " \
 			"setenv fdtfile am335x-boneblack.dtb; fi; " \
+		"if test $board_name = A335PBGL; then " \
+			"setenv fdtfile am335x-pocketbeagle.dtb; fi; " \
 		"if test $board_name = BBBW; then " \
 			"setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \
 		"if test $board_name = BBG1; then " \