From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 24 May 2016 18:03:55 +0000 (-0700)
Subject: imx: ventana: enable pwm device-tree property based on hwconfig
X-Git-Tag: v2016.07-rc2~49^2~15
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f17a9af84645f5b820da2e7d017b014923ce1b88;p=u-boot

imx: ventana: enable pwm device-tree property based on hwconfig

Most Ventana boards have a connector with off-board digital-I/O signals
including some that can be pinmuxed as either a PWM or a GPIO. The hwconfig
env variable is used to configure these and they will be pinmuxed according
to this configuration in the bootloader.

This patch adds a device-tree fixup that will enable the pwm controller
nodes appropriately for digital-I/O's that are configured as pwm via hwconfig
so that the pin can be used with the Linux kernel /sys/class/pwm API.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 7610381184..44ee73f13d 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -762,6 +762,11 @@ void setup_board_gpio(int board, struct ventana_board_info *info)
 			gpio_direction_input(cfg->gpio_param);
 		} else if (hwconfig_subarg_cmp(arg, "mode", "pwm") &&
 			   cfg->pwm_padmux) {
+			if (!cfg->pwm_param) {
+				printf("DIO%d:  Error: pwm config invalid\n",
+					i);
+				continue;
+			}
 			if (!quiet)
 				printf("DIO%d:  pwm%d\n", i, cfg->pwm_param);
 			imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] |
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 7a3d96a039..feb2df8fa1 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #include <dm.h>
 #include <dm/platform_data/serial_mxc.h>
+#include <hwconfig.h>
 #include <i2c.h>
 #include <fdt_support.h>
 #include <fsl_esdhc.h>
@@ -777,6 +778,16 @@ static int ft_sethdmiinfmt(void *blob, char *mode)
 	return 0;
 }
 
+/* enable a property of a node if the node is found */
+static inline void ft_enable_path(void *blob, const char *path)
+{
+	int i = fdt_path_offset(blob, path);
+	if (i >= 0) {
+		debug("enabling %s\n", path);
+		fdt_status_okay(blob, i);
+	}
+}
+
 /*
  * called prior to booting kernel or by 'fdt boardsetup' command
  *
@@ -920,6 +931,25 @@ int ft_board_setup(void *blob, bd_t *bd)
 		ft_sethdmiinfmt(blob, "yuv422bt656");
 	}
 
+	/* Configure DIO */
+	for (i = 0; i < gpio_cfg[board_type].num_gpios; i++) {
+		struct dio_cfg *cfg = &gpio_cfg[board_type].dio_cfg[i];
+		char arg[10];
+
+		sprintf(arg, "dio%d", i);
+		if (!hwconfig(arg))
+			continue;
+		if (hwconfig_subarg_cmp(arg, "mode", "pwm") && cfg->pwm_param)
+		{
+			char path[48];
+			sprintf(path, "/soc/aips-bus@02000000/pwm@%08x",
+				0x02080000 + (0x4000 * (cfg->pwm_param - 1)));
+			printf("   Enabling pwm%d for DIO%d\n",
+			       cfg->pwm_param, i);
+			ft_enable_path(blob, path);
+		}
+	}
+
 	/*
 	 * Peripheral Config:
 	 *  remove nodes by alias path if EEPROM config tells us the