From: Hannu Lounento Date: Wed, 10 Jan 2018 19:31:24 +0000 (+0100) Subject: net: e1000: add support for writing to EEPROM X-Git-Tag: v2018.03-rc2~47^2~36 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=f1bcad22dd19;p=u-boot net: e1000: add support for writing to EEPROM Port functions for writing to EEPROM, updating the checksum and committing data to flash from the Linux kernel igb driver. Functions were ported from Linux 4.8-rc2 (694d0d0bb20). Signed-off-by: Hannu Lounento CC: Joe Hershberger Signed-off-by: Martyn Welch Reviewed-by: Stefano Babic Acked-by: Joe Hershberger Signed-off-by: Sebastian Reichel --- diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 875682b1b8..1d9f8f3ae2 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -150,6 +150,7 @@ static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #ifndef CONFIG_E1000_NO_NVM static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); @@ -861,6 +862,174 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, return E1000_SUCCESS; } +#ifndef CONFIG_DM_ETH +/****************************************************************************** + * e1000_write_eeprom_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If e1000_update_eeprom_checksum_i210 is not called after this function, the + * Shadow Ram will most likely contain an invalid checksum. + *****************************************************************************/ +static int32_t e1000_write_eeprom_srwr(struct e1000_hw *hw, uint16_t offset, + uint16_t words, uint16_t *data) +{ + struct e1000_eeprom_info *eeprom = &hw->eeprom; + uint32_t i, k, eewr = 0; + uint32_t attempts = 100000; + int32_t ret_val = 0; + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= eeprom->word_size) || + (words > (eeprom->word_size - offset)) || (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset + i) << E1000_EEPROM_RW_ADDR_SHIFT) + | (data[i] << E1000_EEPROM_RW_REG_DATA) | + E1000_EEPROM_RW_REG_START; + + E1000_WRITE_REG(hw, I210_EEWR, eewr); + + for (k = 0; k < attempts; k++) { + if (E1000_EEPROM_RW_REG_DONE & + E1000_READ_REG(hw, I210_EEWR)) { + ret_val = 0; + break; + } + udelay(5); + } + + if (ret_val) { + DEBUGOUT("Shadow RAM write EEWR timed out\n"); + break; + } + } + +out: + return ret_val; +} + +/****************************************************************************** + * e1000_pool_flash_update_done_i210 - Pool FLUDONE status. + * @hw: pointer to the HW structure + * + *****************************************************************************/ +static int32_t e1000_pool_flash_update_done_i210(struct e1000_hw *hw) +{ + int32_t ret_val = -E1000_ERR_EEPROM; + uint32_t i, reg; + + for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { + reg = E1000_READ_REG(hw, EECD); + if (reg & E1000_EECD_FLUDONE_I210) { + ret_val = 0; + break; + } + udelay(5); + } + + return ret_val; +} + +/****************************************************************************** + * e1000_update_flash_i210 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + * + *****************************************************************************/ +static int32_t e1000_update_flash_i210(struct e1000_hw *hw) +{ + int32_t ret_val = 0; + uint32_t flup; + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == -E1000_ERR_EEPROM) { + DEBUGOUT("Flash update time out\n"); + goto out; + } + + flup = E1000_READ_REG(hw, EECD) | E1000_EECD_FLUPD_I210; + E1000_WRITE_REG(hw, EECD, flup); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val) + DEBUGOUT("Flash update time out\n"); + else + DEBUGOUT("Flash update complete\n"); + +out: + return ret_val; +} + +/****************************************************************************** + * e1000_update_eeprom_checksum_i210 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + *****************************************************************************/ +static int32_t e1000_update_eeprom_checksum_i210(struct e1000_hw *hw) +{ + int32_t ret_val = 0; + uint16_t checksum = 0; + uint16_t i, nvm_data; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = e1000_read_eeprom_eerd(hw, 0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("EEPROM read failed\n"); + goto out; + } + + if (!(e1000_get_hw_eeprom_semaphore(hw))) { + /* Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { + ret_val = e1000_read_eeprom_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("EEPROM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (uint16_t)EEPROM_SUM - checksum; + ret_val = e1000_write_eeprom_srwr(hw, EEPROM_CHECKSUM_REG, 1, + &checksum); + if (ret_val) { + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("EEPROM Write Error while updating checksum.\n"); + goto out; + } + + e1000_put_hw_eeprom_semaphore(hw); + + ret_val = e1000_update_flash_i210(hw); + } else { + ret_val = -E1000_ERR_SWFW_SYNC; + } + +out: + return ret_val; +} +#endif + /****************************************************************************** * Verifies that the EEPROM has a valid checksum * @@ -970,7 +1139,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC(); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan && hw->mac_type != e1000_igb) return E1000_SUCCESS; while (timeout) { @@ -1044,7 +1213,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) if (!hw->eeprom_semaphore_present) return E1000_SUCCESS; - if (hw->mac_type == e1000_80003es2lan) { + if (hw->mac_type == e1000_80003es2lan || hw->mac_type == e1000_igb) { /* Get the SW semaphore. */ if (e1000_get_software_semaphore(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index fcb7df0d83..6376de15ad 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -1242,6 +1242,9 @@ struct e1000_hw { #define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ #define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ #define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ +#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/ +#define E1000_FLUDONE_ATTEMPTS 20000 #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */